BEJTF24SENITelematics(24CY DCM 5G)

1/10 Technical Specification (TF24SENI) FCC ID: BEJTF24SENI IC: 2703H- Model Name : TF24SENI TF24SENI 2/10 History Ver. Date Contents Written by Checked by Approved by Note 1.0 2022.12.02 3/10 Contents 1. Product Introduction ................................................................................................. 4 1.2 Environmental Specifications .................................................................................... 4 1.3 Electrical Specifications ............................................................................................. 5 1.3.1 Absolute Maximum Rating and ESD Ratings .......................................................... 5 1.3.2 Current Consumption ..............................................................................................5 1.4 Mechanical Specifications ......................................................................................... 5 1.4.1 Physical Dimensions and Connection Interface ...................................................... 5 1.4.2 Mechanical Drawing ............................................................................................... 6 2. RF Specification .......................................................................................................... 6 2.1 5G NR Specification .................................................................................................. 7 2.2 LTE Specification ...................................................................................................... 7 4/10 1. Product Introduction The TF24SENI are designed for the automotive industry. They support 5G NR, LTE and WCDMA, WIFI air Interface standards. The NAD module which is called as TM15FNNATY0 are based on the Qualcomm SA515M wireless chipsets and support the following bands. Only LTE, 5GNR supported in USA/Canada. Table 1. Supported Band Region NA (North America) Band NR n2/n5/n12/n66/n77 LTE B2/4/5/12/14/66 WCDMA - 1.1 Block Diagram 1.2 Environmental Specifications The environmental specification for operating and storage of the TF24SENI are defined in the table below. Only LTE, 5GNR supported in USA/Canada. 5/10 Table 2. Environmental Specifications Parameter Temperature Range Operating Temperature -30°C to 95°C Storage Temperature -40°C to 95°C Humidity 85% or less 1.3 Electrical Specifications This section provides details for some of the key electrical specifications of the TM15FNNATY0 embedded modules. 1.3.1 Absolute Maximum Rating This section defines the Absolute Maximum Ratings of the TF24SENI embedded modules. Warning: If these parameters are exceeded, even momentarily, damage may occur to the device. 1.4 Mechanical Specifications 1.4.1 Physical Dimensions and Connection Interface The TM15FNNATY0 embedded modules are a Land Grid Array(LGA) form factor device. The device does not have a System or RF connectors. All electrical and mechanical connections are made via the LGA pad on the underside of the PCB. Table5. TM15FNNATY0 Embedded Module Dimensions Parameter Nominal Max Units Overall Dimension 45 x 39 45.35 x 39.35 mm Overall Module Height 3.4 3.6 mm PCB Thickness 1.0 1.1 mm Flatness Specification 0.15 mm Weight TBD g 6/10 2. RF Specification The specifications for the 5G NR & LTE interfaces are defined. TF24SENI is designed to be compliant with the standard shown in the table below. Table6. Standards Compliance Technology Standards 5G NR • 3GPP Release 15 LTE • 3GPP Release 15 * The transmission of radio equipment is in vehicle use only. 7/10 2.1 5G NR Specification 2.1.1 NR RX Sensitivity The Receiver Sensitivity of the TF24SENI are specified in the following table. Table7. Conducted RX (Receive) Sensitivity – NR Bands 2.2 LTE Specification 2.2.1 LTE RX Sensitivity The Receiver Sensitivity of the are specified in the following table. Table7. Conducted RX (Receive) Sensitivity – LTE Bands BAND Method (DL CH) Specification BAND 2 Reference sensitivity level Measure BLER of Mid Channel (900) in Band2 sensitivity : ≤-94.3 BLER : ≤ 5% BAND 4 Reference sensitivity level Measure BLER of Mid Channel (2175) in Band4 sensitivity : ≤-96.3 BLER : ≤ 5% TF24SENI BAND Method (DL CH) Specification n2 Reference sensitivity level Measure BLER of Mid Channel (392000) in Band2 sensitivity : ≤-94.1 BLER : ≤ 5% (SCS:15 kHz / BW:10 MHz) n5 Reference sensitivity level Measure BLER of Mid Channel (176300) in Band5 sensitivity : ≤-94.1 BLER : ≤ 5% (SCS:15 kHz / BW:10 MHz) n12 Reference sensitivity level Measure BLER of Mid Channel (147500) in Band12 sensitivity : ≤-93.1 BLER : ≤ 5% (SCS:15 kHz / BW:10 MHz) n66 Reference sensitivity level Measure BLER of Mid Channel (431000) in Band66 sensitivity : ≤-95.6 BLER : ≤ 5% (SCS:15 kHz / BW:10 MHz) n77 Reference sensitivity level Measure BLER of Mid Channel (650000) in Band77 sensitivity : ≤-84.1 BLER : ≤ 5% (SCS:30 kHz / BW:100 MHz) 8/10 BAND 5 Reference sensitivity level Measure BLER of Mid Channel (2525) in Band5 sensitivity : ≤-94.3 BLER : ≤ 5% BAND 12 Reference sensitivity level Measure BLER of Mid Channel (5095) in Band12 sensitivity : ≤-93.3 BLER : ≤ 5% BAND 14 Reference sensitivity level Measure BLER of Mid Channel (5330) in Band14 sensitivity : ≤-93.3 BLER : ≤ 5% BAND 66 Reference sensitivity level Measure BLER of Mid Channel (66886) in Band66 sensitivity : ≤-95.8 BLER : ≤ 5% 9/10 Notice Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residen…

Text truncated - open the document above for the full version.

Rev 1/26/2023 LG Electronics USA 111 Sylvan Avenue North Building Englewood Cliffs New Jersey United States 07632 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 02-23-2023 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: BEJTF24SENI LG Electronics USA certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Heejae Cho Rev 1/26/2023 LG Electronics USA 111 Sylvan Avenue North Building Englewood Cliffs New Jersey United States 07632 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 02-23-2023 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: BEJTF24SENI LG Electronics USA certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Heejae Cho

Rev 1/26/2023 LG Electronics USA 111 Sylvan Avenue North Building Englewood Cliffs New Jersey United States 07632 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 02/23/2023 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID or Grantee Code: BEJ LG Electronics USA (“the applicant”) certifies that, as of the date of the filing of the application, we designate ourselves as the U.S. agent for service of process. Designated U.S. Agent Information: FRN: 0023476120 Name: LG Electronics USA Address: 111 Sylvan Avenue North Building Englewood Cliffs New Jersey United States 07632 Contact Person: Heejae Cho Tel.: 201-470-2696 Email: [email protected] Sincerely, LG Electronics USA Heejae Cho

LG Electronics USA 111 Sylvan Avenue North Building Englewood Cliffs New Jersey United States 07632 Date: 02/23/2023 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Letter of Authorization We, the undersigned, hereby authorize Geunki Son of Dt&C Co., Ltd. to act on our behalf in all manners relating to application for equipment authorization for FCC ID: BEJTF24SENI including signing of all documents relating to these matters. Any and all acts carried out by Geunki Son of Dt&C Co., Ltd. on our behalf shall have the same affect as acts of our own. This authorization is valid until further written notice from LG Electronics USA. “I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a).” Sincerely, Contact Name: Heejae Cho Title: Director, Regulatory and Environmental Affairs

LG Electronics USA 111 Sylvan Avenue North Building Englewood Cliffs New Jersey United States 07632 Date: 02/23/2023 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Request of Confidentiality FCC ID: BEJTF24SENI To Whom It may Concern: Pursuant to Sections 0.457 and 0.459 of the Commission`s Rules(CFR 47), and Section 552 (b) (4) of the Freedom of Information Act, LG Electronics USA, Inc.. hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA 04-1705. This provision will give LG Electronics USA, Inc.. temporary confidentiality of commercially sensitive information prior to product release. The requested permanent and Short-Term Confidential exhibits are listed as follows: PERMANENT & SHORT-TERM CONFIDENTIAL LIST Exhibit Description PERMANENT 1 Block Diagram 2 Schematics 3 Part Lists 4 Operation Description 5 NA SHORT-TERM 6 Internal Photos 7 External Photos 8 Test-Setup Photos 9 User Manual The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be public before the date of the Grant for this application. Sincerely, Contact Name: Heejae Cho Title: Director, Regulatory and Environmental Affairs

FCC ID: BEJTF24SENI IC: 2703H-TF24SENI Copyright Ⓒ 2023, Dt&C Co., Ltd. View 1 FCC ID: BEJTF24SENI IC: 2703H-TF24SENI Copyright Ⓒ 2023, Dt&C Co., Ltd. View 2 FCC ID: BEJTF24SENI IC: 2703H-TF24SENI Copyright Ⓒ 2023, Dt&C Co., Ltd. View 3

ID Label Information Model Name : TF24SENI FCC ID : BEJTF24SENI Contains FCC ID : BEJTM15FNNATY0 IC : 2703H-TF24SENI Contains IC : 2703H-TM15FNNATY0 1.2 Label Location Drawing The laser marking shown shall be permanently marked at a conspicuous location on the device.

FCC ID: BEJTF24SENI IC: 2703H-TF24SENI Copyright Ⓒ 2023, Dt&C Co., Ltd. View 1 FCC ID: BEJTF24SENI IC: 2703H-TF24SENI Copyright Ⓒ 2023, Dt&C Co., Ltd. View 2 FCC ID: BEJTF24SENI IC: 2703H-TF24SENI Copyright Ⓒ 2023, Dt&C Co., Ltd. View 3

FCC ID: BEJTF24SENI IC: 2703H-TF24SENI Copyright Ⓒ 2023, Dt&C Co., Ltd. View 4 FCC ID: BEJTF24SENI IC: 2703H-TF24SENI Copyright Ⓒ 2023, Dt&C Co., Ltd. View 6 <WIFI Antenna> FCC ID: BEJTF24SENI IC: 2703H-TF24SENI Copyright Ⓒ 2023, Dt&C Co., Ltd. View 7 <GNSS Antenna> FCC ID: BEJTF24SENI IC: 2703H-TF24SENI Copyright Ⓒ 2023, Dt&C Co., Ltd. View 8 <LTE 1 Antenna> <LTE 2 Antenna> FCC ID: BEJTF24SENI IC: 2703H-TF24SENI Copyright Ⓒ 2023, Dt&C Co., Ltd. View 9

FCC ID: RF feature(Worst Mode) Max Target Power (dBm) ANT Gain (dBi) Maximum EIRP (dBm) Maximum EIRP (mW) Maximum power density (mW/cm 2 ) Requirement (mW/cm 2 ) 802.11b2 412.00~2 462.0015.500.21 15.7137.2400.007 5 1.000 0 802.11n(HT40)5 180.00~5 240.0010.703.25 13.9524.8320.005 0 1.000 0 802.11n(HT40)5 260.00~5 320.0012.502.17 14.6729.3090.005 9 1.000 0 802.11n(HT20)5 500.00~5 720.0013.003.02 16.0239.9950.008 0 1.000 0 802.11n(HT20)5 745.00~5 825.0013.003.21 16.2141.7840.008 4 1.000 0 ~ ~ ~ ▪ S =- Note = / ( 4 X 20 2 X π ) = mW/cm 2 Electric Field strength (V/m) Magnetic field strength (A/m) Power Density (mW/cm 2 ) Averaging time (minutes) 0.3 ~ 1.346141.63*10030 1.34 ~ 30824/f2.19 / f *180 / f 2 30 30 ~ 30027.50.0730.230 300 ~ 1,500f / 150030 1,500 ~ 100,0001.030 Conclusion : BEJTF24SENI MPE Calculation Frequency range (MHz) Note: Please refer to the operation description for Max tune-up power. The EUT will only be used with a separation of 20 centimeters or greater between the antenna and the body of the user. The MPE sample calculation for this exposure is shown below. ▪ Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) The exposure condition of this device is compliant with FCC EIRP / ( 4 R 2 π ) 37.240 S= Maximum power density(mW/cm 2 ) 0.008EIRP= Equivalent Isotropic Radiated Power(mW) R= Distance to the center of the radiation of the antenna(20cm) FCC ID: RF feature(Worst Mode) Norminal Target Power(dBm) Note1 Tolerance (dB) ANT Gain (dBi) Note2 Maximum EIRP (dBm) Maximum EIRP (mW) Maximum power density (mW/cm 2 ) Requirement (mW/cm 2 ) NR Band n2(ANT1)1850.00~1910.0023.002.701.8827.58572.7970.114 01.000 0 NR Band n5(ANT2)824.00~849.0023.002.70-0.0125.69370.6810.073 80.549 0 NR Band n12(ANT1)699.00~716.0023.002.70-1.1524.55285.1020.056 80.466 0 NR Band n66(ANT1)1710.00~1780.0023.002.700.1825.88387.2580.077 11.000 0 NR Band n77(ANT2)3450.00~3550.0022.502.50-1.1323.87243.7820.048 51.000 0 NR Band n77(ANT2)3700.00~3980.0022.502.50-2.3622.64183.6540.036 61.000 0 Band14(ANT2)788.00~798.0023.002.70-0.5425.16328.0960.065 30.525 0 ~ ~ ~ ▪ S = - Note = / ( 4 X 20 2 X π ) = mW/cm 2 Electric Field strength (V/m) Magnetic field strength (A/m) Power Density (mW/cm 2 ) Averaging time (minutes) 0.3 ~ 1.346141.63*10030 1.34 ~ 30824/f2.19 / f *180 / f 2 30 30 ~ 30027.50.0730.230 300 ~ 1,500f / 150030 1,500~100,0001.030 Conclusion : R= Distance to the center of the radiation of the antenna(20cm) ▪ Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) The exposure condition of this device is compliant with FCC The MPE sample calculation for this exposure is shown below. EIRP / ( 4 R 2 π ) 572.797 S= Maximum power density(mW/cm 2 ) 0.114EIRP= Equivalent Isotropic Radiated Power(mW) BEJTF24SENI MPE Calculation Frequency range (MHz) Note1: Please refer to the operation description for Max tune-up power. Note2: Path Loss : Loss from conducted point to antenna pad The EUT will only be used with a separation of 20 centimeters or greater between the antenna and the body of the user. ▪ ▪ - BEJTF24SENIFCC ID: RF Exposure Compliance for simultaneous operations - The exposure condition of this device is compliant with FCC rules.Conclusion : Σ of MPE ratios ≤ 1▪ Requirment = -- 0.122 4- - 0.114 0 Worst case for simultaneous operations - Requirement (mW/cm2) - 1.000 0 - - Worst case(MPE ratio)--- --- 0.008 4 0.008 4 MPE ratio (Power Density/Requirement) -- --- Σ of MPE ratios - - 5GHz 0.008 4 - n2 - - 0.114 0 -- - RF feature or mode WLAN(5GHz) + NR Band(n2) 1.000 0 NR Band802.11n(HT20) Power Density (mW/cm2) 0.114 0 - Band(Worst case)

FCC ID: BEJTF24SENI Report No.: DRTFCC2302-0013(2) IC : 2703H-TF24SENI This test report is prohibited to copy or reissue in whole or in part without the approval of Dt&C Co., Ltd. TRF-RF-228(05)210316 Pages: 2 / 14 Test Report Version Test Report No. Date Description Revised by Reviewed by DRTFCC2302-0013 Feb. 24, 2023 Initial issue JaeHyeok Bang JaeJin Lee DRTFCC2302-0013(1) Feb. 27, 2023 Channel move time re- measurement JaeHyeok Bang JaeJin Lee DRTFCC2302-0013(2) Mar. 02, 2023 Typo correction for FVIN JaeHyeok Bang JaeJin Lee FCC ID: BEJTF24SENI Report No.: DRTFCC2302-0013(2) IC : 2703H-TF24SENI This test report is prohibited to copy or reissue in whole or in part without the approval of Dt&C Co., Ltd. TRF-RF-228(05)210316 Pages: 3 / 14 Table of Contents 1. GENERAL INFORMATIONEUT DESCRIPTION ........................ 4 1.1. EUT Description .................................................................... 4 1.2. Test Support Equipment ........................................................ 4 1.3. Testing Laboratory ................................................................. 5 1.4. Testing Environment .............................................................. 5 2. DYNAMIC FREQUENCY SELECTION TEST DESCRIPTION ... 6 2.1. Applicability of DFS requirements prior to use of a channel ... 6 2.2. Applicability of DFS requirements during normal operation ... 6 2.3. Requirements of client devices .............................................. 7 2.4. DFS response requirement values ........................................ 7 2.5. DFS detection thresholds ...................................................... 8 2.6. Radar test waveforms ........................................................... 9 3. Test procedure ........................................................................ 10 3.1. Setup for Client with injection at the Master ......................... 10 3.2. Spectrum analyzer setting parameter .................................. 10 3.3. Conducted test procedure ................................................... 10 4. SUMMARY OF TESTS ..............................................................11 5. LIST OF EQUIPMENTS ........................................................... 12 6. TEST RESULTS ....................................................................... 13 6.1. Move time and aggregate time ............................................ 13 6.1.1. U-NII-2A : 5 310 MHz ....................................................................... 13 6.1.2. U-NII-2C : 5 510 MHz ....................................................................... 13 6.2. Non-occupancy period ........................................................ 14 6.2.1. U-NII-2A: 5 310 MHz ........................................................................ 14 6.2.2. U-NII-2C: 5 510 MHz ........................................................................ 14 FCC ID: BEJTF24SENI Report No.: DRTFCC2302-0013(2) IC : 2703H-TF24SENI This test report is prohibited to copy or reissue in whole or in part without the approval of Dt&C Co., Ltd. TRF-RF-228(05)210316 Pages: 4 / 14 1. GENERAL INFORMATIONEUT DESCRIPTION 1.1. EUT Description Equipment class Unlicensed National Information Infrastructure TX (NII) Product Name Telematics(24CY DCM 5G) Model Name TF24SENI Add Model Name - Product Marketing Name (PMN) TF24SENI Firmware Version Identification Number 06a Power supply DC 12 V EUT capabilities DFS Operational mode Master mode Client mode without radar detection Client mode with radar detection Test condition Conducted Radiated Frequency Range U-NII 2A(5 250 MHz ~ 5 350 MHz) ▪ 802.11a/n(HT20)/ac(VHT20): 5 260 MHz ~ 5 320 MHz ▪ 802.11n(HT40)/ac(VHT40): 5 270 MHz ~ 5 310 MHz ▪ 802.11ac(VHT80): 5 290 MHz U-NII 2C(5 470 MHz ~ 5 725 MHz) ▪ 802.11a/n(HT20)/ac(VHT20): 5 500 MHz ~ 5 580 MHz, 5 660 MHz ~ 5 720 MHz ▪ 802.11n(HT40)/ac(VHT40): 5 510 MHz ~ 5 550 MHz, 5 670 MHz ~ 5 710 MHz ▪ 802.11ac(VHT80): 5 530 MHz, 5 690 MHz Modulation type OFDM Antenna specification Antenna type: PIFA Antenna Antenna gain U-NII 2A : 2.17 dBi U-NII 2C : 3.02 dBi Note1: The above EUT information was declared by the manufacturer. Note2: Refer to UNII report 1.2. Test Support Equipment Equipment Model No. Serial No. Manufacturer Note Access Point (Master) DIR-868L R3X81E6000093 D-Link FCC ID: KA2IR868LA1 Contains FCC ID: RRK2012060056-1 IC: 4216A-IR868LA1 Contains IC: 4833A-WMCAC01A1 FCC ID: BEJTF24SENI Report No.: DRTFCC2302-0013(2) IC : 2703H-TF24SENI This test report is prohibited to copy or reissue in whole or in part without the approval of Dt&C Co., Ltd. TRF-RF-228(05)210316 Pages: 5 / 14 1.3. Testing Laboratory Dt&C Co., Ltd. The 3 m test site and conducted measurement facility used to collect the radiated data are located at the 42, Yurim-ro, 154beon-gil, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea 17042. The test site complies with the requirements of § 2.948 according to ANSI C63.4-2014. - FCC & IC MRA Designation No. : KR0034 - ISED#: 5740A www.dtnc.net Telephone : + 82-31-321-2664 FAX : + 82-31-321-1664 1.4. Testing Environment Ambient Condition ▪ Temperature +21 o C ~ +22 o C ▪ Relative Humidity +36 % ~ +39 % FCC ID: BEJTF24SENI Report No.: DRTFCC2302-0013(2) IC : 2703H-TF24SENI This test report is prohibited to copy or reissue in whole or in part without the approval of Dt&C Co., Ltd. TRF-RF-228(05)210316 Pages: 6 / 14 2. DYNAMIC FREQUENCY SELECTION TEST DESCRIPTION 2.1. Applicability of DFS requirements prior to use of a channel Requirement Operational mode Master Client without radar detection Client with radar detection Non-Occupancy Period Ye s Not required Ye s DFS Detection Threshold Ye s Not required Ye s Channel Availability Check time Ye s Not required Not required U-NII Detection Bandwidth Ye s Not required Ye s 2.2. Applicability of DFS requirements during normal operation Requirement Operational mode Master or client with radar detection Client without radar detection DFS Detection Threshold Ye s Not requi…

Text truncated - open the document above for the full version.

FCC ID: BEJTF24SENI Report No.: DRTFCC2302-0015 IC : 2703H-TF24SENI This test report is prohibited to copy or reissue in whole or in part without the approval of Dt&C Co., Ltd. TRF-RF-234(06)210316 Pages: 2 / 121 Test Report Version Test Report No. Date Description Revised by Reviewed by DRTFCC2302-0015 Feb. 24, 2023 Initial issue JaeHyeok Bang JaeJin Lee FCC ID: BEJTF24SENI Report No.: DRTFCC2302-0015 IC : 2703H-TF24SENI This test report is prohibited to copy or reissue in whole or in part without the approval of Dt&C Co., Ltd. TRF-RF-234(06)210316 Pages: 3 / 121 CONTENTS 1. General Information .................................................................................... 4 1.1. Description of EUT ................................................................................ 4 1.2. Declaration by the applicant / manufacturer .......................................... 5 1.3. Testing Laboratory ................................................................................. 5 1.4. Testing Environment .............................................................................. 5 1.5. Measurement Uncertainty ..................................................................... 5 1.6. Test Equipment List ............................................................................... 6 2. Test Methodology ........................................................................................ 7 2.1. EUT Configuration ................................................................................. 7 2.2. EUT Exercise......................................................................................... 7 2.3. General Test Procedures ....................................................................... 7 2.4. Instrument Calibration ........................................................................... 7 2.5. Description of Test Modes ..................................................................... 8 3. Antenna Requirements ............................................................................. 10 4. Summary of Test Result ........................................................................... 11 5. TEST RESULT ............................................................................................ 12 5.1 Emission Bandwidth (26 dB Bandwidth) & Occupied BW (99 %) ..................... 12 5.2 Minimum Emission Bandwidth (6 dB Bandwidth) & Occupied BW (99 %) ....... 31 5.3 Maximum Conducted Output Power ................................................................ 45 5.4 Maximum Power Spectral Density ................................................................... 49 5.5 Unwanted Emissions ....................................................................................... 76 5.6 AC Power-Line Conducted Emissions ............................................................. 85 APPENDIX I .................................................................................................... 86 APPENDIX II ................................................................................................... 87 APPENDIX III .................................................................................................. 90 FCC ID: BEJTF24SENI Report No.: DRTFCC2302-0015 IC : 2703H-TF24SENI This test report is prohibited to copy or reissue in whole or in part without the approval of Dt&C Co., Ltd. TRF-RF-234(06)210316 Pages: 4 / 121 1. General Information 1.1. Description of EUT Equipment Class Unlicensed National Information Infrastructure Tx (U-NII) Product Name Telematics(24CY DCM 5G) Model Name TF24SENI Add Model Name - Product Marketing Name (PMN) TF24SENI Firmware Version Identification Number 06a EUT Serial Number No Specified Power Supply DC 12 V Modulation Technique OFDM Antenna Specification Antenna Type: PIFA Antenna U-NII 1: 3.25 dBi U-NII 2A : 2.17 dBi U-NII 2C : 3.02 dBi U-NII 3: 3.21 dBi Band Mode Tx. frequency(MHz) Max. conducted power(dBm) Antenna gain(dBi) Max. e.i.r.p (dBm) U-NII 1 802.11a 5 180 ~ 5 240 9.67 3.25 12.92 802.11n(HT20) 5 180 ~ 5 240 10.30 3.25 13.55 802.11ac(VHT20) 5 180 ~ 5 240 10.28 3.25 13.53 802.11n(HT40) 5 190 ~ 5 230 10.43 3.25 13.68 802.11ac(VHT40) 5 190 ~ 5 230 10.38 3.25 13.63 802.11ac(VHT80) 5 210 10.51 3.25 13.76 U-NII 2A 802.11a 5 260 ~ 5 320 10.48 2.17 12.65 802.11n(HT20) 5 260 ~ 5 320 10.12 2.17 12.29 802.11ac(VHT20) 5 260 ~ 5 320 10.09 2.17 12.26 802.11n(HT40) 5 270 ~ 5 310 12.05 2.17 14.22 802.11ac(VHT40) 5 270 ~ 5 310 12.02 2.17 14.19 802.11ac(VHT80) 5 290 11.05 2.17 13.22 U-NII 2C 802.11a 5 500 ~ 5 720 11.68 3.02 14.70 802.11n(HT20) 5 500 ~ 5 720 11.72 3.02 14.74 802.11ac(VHT20) 5 500 ~ 5 720 11.68 3.02 14.70 802.11n(HT40) 5 510 ~ 5 710 11.52 3.02 14.54 802.11ac(VHT40) 5 510 ~ 5 710 11.41 3.02 14.43 802.11ac(VHT80) 5 530 ~ 5 690 11.66 3.02 14.68 U-NII 3 802.11a 5 745 ~ 5 825 10.46 3.21 13.67 802.11n(HT20) 5 745 ~ 5 825 12.59 3.21 15.80 802.11ac(VHT20) 5 745 ~ 5 825 12.42 3.21 15.63 802.11n(HT40) 5 755 ~ 5 795 11.27 3.21 14.48 802.11ac(VHT40) 5 755 ~ 5 795 11.22 3.21 14.43 802.11ac(VHT80) 5 775 12.42 3.21 15.63 FCC ID: BEJTF24SENI Report No.: DRTFCC2302-0015 IC : 2703H-TF24SENI This test report is prohibited to copy or reissue in whole or in part without the approval of Dt&C Co., Ltd. TRF-RF-234(06)210316 Pages: 5 / 121 1.2. Declaration by the applicant / manufacturer N/A 1.3. Testing Laboratory Dt&C Co., Ltd. The 3 m test site and conducted measurement facility used to collect the radiated data are located at the 42, Yurim-ro, 154beon-gil, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea 17042. The test site complies with the requirements of Part 2.948 according to ANSI C63.4-2014. - FCC & IC MRA Designation No. : KR0034 - ISED#: 5740A www.dtnc.net Telephone : + 82-31-321-2664 FAX : + 82-31-321-1664 1.4. Testing Environment Ambient Condition ▪ Temperature +20 °C ~ +26 °C ▪ Relative Humidity +38 % ~ +44 % 1.5. Measurement Uncertainty The measurement uncertainties shown below were calculated in accordance with requirem…

Text truncated - open the document above for the full version.

FCC ID: BEJTF24SENI Report No.: DRTFCC2302-0015 IC : 2703H-TF24SENI This test report is prohibited to copy or reissue in whole or in part without the approval of Dt&C Co., Ltd. TRF-RF-234(06)210316 Pages: 65 / 121 Maximum Power Spectral Density Test Mode: TM 2 & Ch.144 FCC ID: BEJTF24SENI Report No.: DRTFCC2302-0015 IC : 2703H-TF24SENI This test report is prohibited to copy or reissue in whole or in part without the approval of Dt&C Co., Ltd. TRF-RF-234(06)210316 Pages: 66 / 121 Maximum Power Spectral Density Test Mode: TM 2 & Ch.149 Maximum Power Spectral Density Test Mode: TM 2 & Ch.157 FCC ID: BEJTF24SENI Report No.: DRTFCC2302-0015 IC : 2703H-TF24SENI This test report is prohibited to copy or reissue in whole or in part without the approval of Dt&C Co., Ltd. TRF-RF-234(06)210316 Pages: 67 / 121 Maximum Power Spectral Density Test Mode: TM 2 & Ch.165 FCC ID: BEJTF24SENI Report No.: DRTFCC2302-0015 IC : 2703H-TF24SENI This test report is prohibited to copy or reissue in whole or in part without the approval of Dt&C Co., Ltd. TRF-RF-234(06)210316 Pages: 68 / 121 Maximum Power Spectral Density Test Mode: TM 3 & Ch.38 Maximum Power Spectral Density Test Mode: TM 3 & Ch.46 FCC ID: BEJTF24SENI Report No.: DRTFCC2302-0015 IC : 2703H-TF24SENI This test report is prohibited to copy or reissue in whole or in part without the approval of Dt&C Co., Ltd. TRF-RF-234(06)210316 Pages: 69 / 121 Maximum Power Spectral Density Test Mode: TM 3 & Ch.54 Maximum Power Spectral Density Test Mode: TM 3 & Ch.62 FCC ID: BEJTF24SENI Report No.: DRTFCC2302-0015 IC : 2703H-TF24SENI This test report is prohibited to copy or reissue in whole or in part without the approval of Dt&C Co., Ltd. TRF-RF-234(06)210316 Pages: 70 / 121 Maximum Power Spectral Density Test Mode: TM 3 & Ch.102 Maximum Power Spectral Density Test Mode: TM 3 & Ch.110 FCC ID: BEJTF24SENI Report No.: DRTFCC2302-0015 IC : 2703H-TF24SENI This test report is prohibited to copy or reissue in whole or in part without the approval of Dt&C Co., Ltd. TRF-RF-234(06)210316 Pages: 71 / 121 Maximum Power Spectral Density Test Mode: TM 3 & Ch.142 FCC ID: BEJTF24SENI Report No.: DRTFCC2302-0015 IC : 2703H-TF24SENI This test report is prohibited to copy or reissue in whole or in part without the approval of Dt&C Co., Ltd. TRF-RF-234(06)210316 Pages: 72 / 121 Maximum Power Spectral Density Test Mode: TM 3 & Ch.151 Maximum Power Spectral Density Test Mode: TM 3 & Ch.159 FCC ID: BEJTF24SENI Report No.: DRTFCC2302-0015 IC : 2703H-TF24SENI This test report is prohibited to copy or reissue in whole or in part without the approval of Dt&C Co., Ltd. TRF-RF-234(06)210316 Pages: 73 / 121 Maximum Power Spectral Density Test M…

Text truncated - open the document above for the full version.