BEJTUVM01IUVW OCU module

SEPTEMBER 7, 2014 ODT Manual LG Electronics Inc. LGE Confidential Contents I.What is ODT? II.Environment for ODT III.Function List IV.Function in detail LGE Confidential 1. What is ODT? 2/ 60 ODT(OCU Development Tool) is development tool for debugging, testing and analyzing for OCU USB Interface ODT for PC OCU Serial Communication LGE Confidential 2. Environment for ODT 3/ 60 OS: Windows 7 or later (We not support Windows XP) Development Tool: Visual Studio 2010 LGE Confidential 3. Function List 4/ 60 WindowMajor Functionalities Main GNSS Information, Network Information, Filtering Logs, Power Status, Virtual Button, Telltale, QXDM Logging, GNSS Maker GNSSGNSS Information CallCall Control, Auto Answer, RF Information DataAPN, QoS Setup SIMSIM information, Virtual SIM SMSSend SMS message, Receive SMS message. AudioPlay Prompt, Start/Stop Loopback LogSystem Logs, Service Logs, Debug Messages DTCDisplay DTC’s Status ConfigurationSet and Get OCU’s Configuration UpdateSW upgrade of NAD, GNSS and Micom KML ConvertorGenerate KML file LGE Confidential 4. Function -Main 5/ 60 LGE Confidential 4. Function -GNSS 6/ 60 View > GNSS > GNSS Information : You can see information of GNSS and DR in detail using this function. LGE Confidential 4. Function -Network 7/ 60 View > Network > Call : You can see the network information and call using this function. LGE Confidential 4. Function -Network 8/ 60 View > Network > APN : You can get and set APN and QoSsetup through this function. LGE Confidential 4. Function -Network 9/ 60 View > Network > SMS : You can send and receive the SMS message. LGE Confidential 4. Function -Network 10/ 60 View > Network > UICC: You can set and get all UICC’s parameters. LGE Confidential 4. Function –System Information 11/ 60 View > System Information : You can see and check all version of OCU’s module. LGE Confidential 4. Function –DTC 12/ 60 View > DTC : You can get, clear and mask DTC(Diagnostic Trouble Codes) of OCU. LGE Confidential 4. Function –Audio 13/ 60 View > Audio : You can control the audio features of OCU using this function LGE Confidential 4. Function –Logs 14/ 60 View > Logs: You can see all logs of OCU LGE Confidential 4. Function –Configuration 15/ 60 View > Configuration > Configuration : You can set and get the configuration of OCU. LGE Confidential 4. Function –BUB (Backup Battery) 16/ 60 View > BUB : You can get the BUB(Backup Battery)’s status. LGE Confidential 4. Function –HW IO 17/ 60 View > HW IO : You can control the LED of OCU and get the Microphone’s current. LGE Confidential 4. Function –KML Convertor 18/ 60 View > KML Convertor: You can convert from the raw data of GNSS and Network to KML file to test and debug on Google Earth LGE Confidential 4. Function –Update 19/ 60 View > KML Convertor : You can update NAD, Micomand GNSS of OUC using this function. LGE Confidential 4. Function –Help 20/ 60 View > Help > About ODT : You can know the version and expire date of ODT through this function Part 15.21 statement "Change or Modifications that are not expressly approved by the manufa cturer could void the user's authority to operate the equipment. “ "In order to comply with RF Exposure requirements the anten na or ra diating element of this device must be installed to ensure that it is at least 20cm from end users. The antenna supplied with this device must not exceed a maximum gain of -7dBi in the cellular band and -7dBi in the PCS band." Part 15.105 statement This equipment has been tested and found to comply with the limit s for a class B digital device, pursuant to Part 15 of the FCC Rul es. These limit s are de signed to pro vide reasona ble protection against harmful interference in a resid ential installation. This equi pment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee th at interferen ce will n ot occur in a particular in stallation. If this equipme nt do es cause h armful interferen ce or televisio n reception, which can b e determi ned by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or rel ocate the receiving antenn a. -Increase the se paration between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Part 15 Class B Compliance This device and its accessories comply with p art15 of FCC rule s. Operation is subject to the following two conditions: (1) This device & its accessories may not cause harmful interference. (2) This device & it s accessories must accept any interference received, including interference that may cause undesired operation. Installation This unit should only be installed by qualified personnel by . The transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 30 cm between the radiator and any part of your body.

LG Electronics USA 1000 sylvan Avenue, Englewood Cliffs, New Jersey, United States, 07632 Date: March 24, 2015 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 c.c. Timco Engineering, Inc. Certification Division 849 N.W. State Road 45 P.O. Box 370 Newberry, Florida 32669 USA To whom it may concern: I, the undersigned, hereby authorize Technical Manager Issac Jin of MOVON CORPORATION and here after referred to as MOVON CORPORATION , to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these m atters. Any and all acts carried out by Technical Manager Issac Jin of MOVON CORPORATION on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing MOVON CORPORATION as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; LG Electronics USA 1000 sylvan Avenue, Englewood Cliffs, New Jersey, United States, 07632 e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Jongchul Lee / Director, NA Regulatory & Environmental Affairs. LG Electronics USA REMARK: 1. This authorization letter will be sent along with your application when filing with the Certification Division. 2. Please follow the format and type it on company letterhead and send original to us. 3. Authorized signature must be in agreement with grantee code contact in FCC database.

PRODUCT EQUALITY DECLARATION We, LG Electronics Inc., declare that TUVM01IU-R is additional brand name of TUVM01IU-G. And declare on our sole responsibility that TUVM01IU-R HW version : Rev.G SW version : Y134 is in all relevant parts identical to the product TUVM01IU-G HW version : Rev.G SW version : Y134 The only difference between TUVM01IU-R and TUVM01IU-G is: 1. H/W - identical 2. S/W - identical Author Information Signature Name Jaewoo Choi Place of Duty 2621, Nambusunhwan-ro, Gangnam-gu, Seoul, 135-860, Korea Tel 82-10-4364-1584 E-mail [email protected] PRODUCT EQUALITY DECLARATION We, LG Electronics Inc., declare that TUVP01IU-G is variant product of TUVM01IU-G. And declare on our sole responsibility that TUVP01IU-G HW version : Rev.A SW version : Y134 is in all relevant parts identical to the product TUVM01IU-G HW version : Rev.G SW version : Y134 The only difference between TUVP01IU-G and TUVM01IU-G is: 1. H/W -. CAN Transiver change from HS-CAN(TUVM01IU-G) to LS-CAN(TUVP01IU-G).
HS-CAN (Data rate: 1Mbit/s) : Very low current Standby and Sleep modes(Typ. 18uA), with local and remote wake-up
LS-CAN (Data rate: 125kbit/s) : Low current sleep mode and standby mode(Typ. 25uA) with wake-up via bus lines TUVM01IU-G TUVP01IU-G -. Add Rollover PWM Receiver 2. S/W - identical Author Information Name Jaewoo Choi Title Senior Research Engineer Tel. 82-10-4364-1584 e-Mail [email protected] TUVM01IU-G TUVP01IU-G PRODUCT EQUALITY DECLARATION We, LG Electronics Inc., declare that TUVP01IU-R is additional brand name of TUVP01IU-G. And declare on our sole responsibility that TUVP01IU-R HW version : Rev.A SW version : Y134 is in all relevant parts identical to the product TUVP01IU-G HW version : Rev.A SW version : Y134 The only difference between TUVP01IU-R and TUVP01IU-G is: 1. H/W - identical 2. S/W - identical Author Information Signature Name Jaewoo Choi Place of Duty 2621, Nambusunhwan-ro, Gangnam-gu, Seoul, 135-860, Korea Tel 82-10-4364-1584 E-mail [email protected]

LG Electronics USA 1000 sylvan Avenue, Englewood Cliffs, New Jersey, United States, 07632 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: BEJTUVM01IU To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematics / Block Diagram / Operational Description / Parts List Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. 2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until 180 days External Photos / Internal Photos / Test Setup Photos / User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondence during certification review process cannot be granted as confidential documents and such information will be available for public review once the grant of equipment authorization is issued. Sincerely Yours, Jongchul Lee / Director, NA Regulatory & Environmental Affairs. LG Electronics USA

External photos of EUT Front view of EUT Rear view of EUT Side view of EUT Side view of EUT Side view of EUT Side view of EUT External Antenna Internal Antenna

Label information

Internal photos of EUT Model name: TUVM01IU-G TUVM01IU-R Main board (Front) Main board (Rear) Sub board (Front) Sub board (Rear) Internal photo Model name: TUVP01IU-G TUVP01IU-R Main board (Front) Main board (Rear) Sub board (Front) Sub board (Rear) Internal photo

MOVON CORPORATION Report Number: MOV-15-RF-I032 Page : (1) of (8) The results shown in this test report refer only to the sample(s) tested unless otherwise stated.Thistest report cannot be reproduced, except in full, without the written approval ofMOVON CORPORATION. RF Exposure Statement Test Report Equipment Under Test VW OCU module Model Name TUVM01IU-G Variant Model Name TUVM01IU-R, TUVP01IU-G, TUVP01IU-R Applicant LG Electronics Inc. FCC ID BEJTUVM01IU IC Number 2703K-TUVM01IU Manufacturer LG Electronics Vietnam Haiphong Co.,Ltd Date of Test(s) 2015. 02. 24 Date of Issue 2015. 03. 24 In the configuration tested, the EUT complied with the standards specified above. Issue to Issue by LG Electronics Inc. 2621, Nambusunhwan-ro, Gangnam-gu, Seoul, Korea Tel.: +82-2-6971-0515 MOVON CORPORATION 498-2, Geumeo-ro, Pogok-eup, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea, 449-812 Tel.: +82-31-338-8837 Fax: +82-31-338-8847 MOVON CORPORATION Report Number: MOV-15-RF-I032 Page : (2) of (8) The results shown in this test report refer only to the sample(s) tested unless otherwise stated.Thistest report cannot be reproduced, except in full, without the written approval ofMOVON CORPORATION. Revision history Revision Date of issue Description Revised by -- Mar 24, 2015 Initial -- MOVON CORPORATION Report Number: MOV-15-RF-I032 Page : (3) of (8) The results shown in this test report refer only to the sample(s) tested unless otherwise stated.Thistest report cannot be reproduced, except in full, without the written approval ofMOVON CORPORATION. Table of contents 1. ATTESTATION OF TEST RESULTS ............................................................................. 4 2. EUT DESCRIPTION ........................................................................................................ 5 3. LIMITS............................................................................................................................. 6 4. MAXIMUM PERMISSIBLE EXPOSURE PREDICTION .................................................. 6 5. RESULTS ........................................................................................................................ 7 MOVON CORPORATION Report Number: MOV-15-RF-I032 Page : (5) of (8) The results shown in this test report refer only to the sample(s) tested unless otherwise stated.Thistest report cannot be reproduced, except in full, without the written approval ofMOVON CORPORATION. 2. EUT Description Kind of product VW OCU module FCC ID BEJTUVM01IU Model Name TUVM01IU-G Variant Model Name TUVM01IU-R, TUVP01IU-G, TUVP01IU-R Serial Number N/A Power supply DC 12.0V Tx Frequency 824.2 ~ 848.8 MHz (GSM850) 1 850.2 ~ 1909.8 MHz (GSM1900) 826.4~846.6 MHz (WCDMA V) 1 852.4~1 907.6 MHz (WCDMA II) Rx Frequency 869.2 ~ 893.8 MHz (GSM850) 1 930.2 ~ 1989.8 MHz (GSM1900) 871.4~891.6 MHz (WCDMA V) 1 932.4~1 987.6 MHz (WCDMA II) Antenna gain (External Antenna) 0㏈i (Max.) (GSM850/WCDMA II) 5.5㏈i (Max.) (GSM1900/WCDMA V) Antenna gain (Internal Antenna) 2.1㏈i (Max.) (GSM850/WCDMA II) 4.609㏈i (Max.) (GSM1900/WCDMA V) 2.1. Declarations by the manufacturer None 2.2. Details of modification None MOVON CORPORATION Report Number: MOV-15-RF-I032 Page : (6) of (8) The results shown in this test report refer only to the sample(s) tested unless otherwise stated.Thistest report cannot be reproduced, except in full, without the written approval ofMOVON CORPORATION. 3. Limits Acconrding to §1.1310 and §2.1091 RF exposure is calculated 4. Maximum Permissible Exposure Prediction Prediction of MPE limit at a given distance S = PG/4πR 2 S = Power Density P = Power input to antenna G = Power gain of the antenna in the direction of interest relative to an isotronpic radiator R = distance to the center of radiation of the antenna MOVON CORPORATION Report Number: MOV-15-RF-I032 Page : (7) of (8) The results shown in this test report refer only to the sample(s) tested unless otherwise stated.Thistest report cannot be reproduced, except in full, without the written approval ofMOVON CORPORATION. 5. Results 5.1 GSM 850 Band EUT parameter (data from the separate report) Max Peak output Power at antenna input terminal (dBm) 33.81 Max Peak output Power at antenna input terminal (mW) 2404.36 Prediction distance (Cm) 30.00 Prediction frequency (MHz) 836.60 Antenna Gain (typical) (dBi) 0 Antenna Gain (numeric) 1.00 Power density at prediction frequency (mW/Cm 2 ) 0.2127 MPE limit for uncontrolled exposure at prediction frequency (mW/Cm 2 ) 0.558 5.2 GSM 1900 Band EUT parameter (data from the separate report) Max Peak output Power at antenna input terminal (dBm) 30.39 Max Peak output Power at antenna input terminal (mW) 1093.96 Prediction distance (Cm) 30.00 Prediction frequency (MHz) 1880.00 Antenna Gain (typical) (dBi) 5.5 Antenna Gain (numeric) 3.55 Power density at prediction frequency (mW/Cm 2 ) 0.3434 MPE limit for uncontrolled exposure at prediction frequency (mW/Cm 2 ) 1.00 MOVON CORPORATION Report Number: MOV-15-RF-I032 Page : (8) of (8) The results shown in this test report refer only to the sample(s) tested unless otherwise stated.Thistest report cannot be reproduced, except in full, without the written approval ofMOVON CORPORATION. 5.3 WCDMA V Band EUT parameter (data from the separate report) Max Peak output Power at antenna input terminal (dBm) 20.66 Max Peak output Power at antenna input terminal (mW) 116.41 Prediction distance (Cm) 30.00 Prediction frequency (MHz) 836.60 Antenna Gain (typical) (dBi) 0 Antenna Gain (numeric) 1.00 Power density at prediction frequency (mW/Cm 2 ) 0.0103 MPE limit for uncontrolled exposure at prediction frequency (mW/Cm 2 ) 0.558 5.4 WCDMA II Band EUT parameter (data from the separate report) Max Peak output Power at antenna input terminal (dBm) 20.68 Max Peak output Power at antenna input terminal (mW) 116.95 Prediction distance (Cm) 30.00 Prediction frequency (MHz) 1907.60 Antenna Gain (typical) (dBi) 5.5 Antenna Gain (numeric) 3.55 Power density at prediction frequency (mW/Cm …

Text truncated - open the document above for the full version.

MOVON CORPORATION Report Number: MOV-15-RF-I031 Page : (1) of (64) The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without the written approval of MOVON CORPORATION. FCC Part §22, §24, §2 IC RSS-132 / 133 / 139 Test Report Equipment Under Test VW OCU module Model Name TUVM01IU-G Variant Model Name TUVM01IU-R, TUVP01IU-G, TUVP01IU-R Applicant LG Electronics Inc. FCC ID BEJTUVM01IU IC Number 2703K-TUVM01IU Manufacturer LG Electronics Vietnam Haiphong Co.,Ltd Date of Test(s) 2015. 02. 02 ~ 2015. 02. 24 Date of Issue 2015. 03. 24 In the configuration tested, the EUT complied with the standards specified above. Issue to Issue by LG Electronics Inc. 2621, Nambusunhwan-ro, Gangnam-gu, Seoul, Korea Tel.: +82-2-6971-0515 MOVON CORPORATION 498-2, Geumeo-ro, Pogok-eup, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea, 449-812 Tel.: +82-31-338-8837 Fax: +82-31-338-8847 MOVON CORPORATION Report Number: MOV-15-RF-I031 Page : (2) of (64) The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without the written approval of MOVON CORPORATION. Revision history Revision Date of issue Description Revised by -- Mar. 24, 2015 Initial -- MOVON CORPORATION Report Number: MOV-15-RF-I031 Page : (3) of (64) The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This test report cannot be reproduced, except in full, without the written approval of MOVON CORPORATION. Table of contents 1. GENERAL INFORMATION ............................................................................................. 4 1.1. DETAILS OF APPLICANT .................................................................................................................................... 4 1.2. MANUFACTURER INFORMATION ........................................................................................................................ 4 1.3. SUMMARY OF TEST RESULTS ............................................................................................................................ 5 2. EUT DESCRIPTION ........................................................................................................ 6 2.1. DECLARATIONS BY THE MANUFACTURER ............................................................................................................ 6 2.2. DETAILS OF MODIFICATION ............................................................................................................................... 6 3. MEASUREMENT EQUIPMENT ...................................................................................... 7 4. OCCUPIED BANDWIDTH .............................................................................................. 8 4.1. TEST SETUP ................................................................................................................................................... 8 4.2. TEST PROCEDURE ....................................................................................................................................... 8 4.3. LIMIT ........................................................................................................................................................... 8 4.4. TEST RESULT ................................................................................................................................................. 9 4.5. TEST PLOTS ................................................................................................................................................. 10 5. BAND EDGE / SPURIUOS AND HARMONIC EMISSIONS AT ANTENNA TERMINAL17 5.1. TEST SETUP ................................................................................................................................................. 17 5.2. TEST PROCEDURE ..................................................................................................................................... 17 5.3. LIMIT ......................................................................................................................................................... 18 5.4. TEST RESULT ............................................................................................................................................... 18 5.5. TEST PLOTS ................................................................................................................................................. 19 6. CONDUCTED OUTPUT POWER ................................................................................. 41 6.1 TEST SETUP ................................................................................................................................................ 41 6.2 TEST PROCEDURE ....................................................................................................................................... 41 6.3 TEST RESULTS ............................................................................................................................................ 41 7. PEAK-TO-AVERAGE-RATIO ....................................................................................... 43 7.1 TEST SETUP ................................................................................................................................................. 43 8. FREQUENCY STABILITY / VARIATION OF AMBIENT TEMPERATURE .................. 48 8.1. TEST SETUP ................................................................................................................................................. 48 8.2. TEST PROCEDURE ........................................................................................................................................ 48 8.3. LIMITS .............................................................................................................................…

Text truncated - open the document above for the full version.

Test setup photo of EUT A. Setup photo of EUT