BEJVX9100

LG Electronics USA, Inc.

Cellular/ PCS CDMA Phone with Bluetooth

Click to zoom

Application Details

Equipment Class: DSS - Part 15 Spread Spectrum Transmitter
Date of Grant: Jan 13, 2008
Application Purpose: Original Equipment
Date of Application: Jan 10, 2008
Equipment Note: Cellular/ PCS CDMA Phone with Bluetooth
Frequency Range: 2402.00000000 - 2480.00000000
Company: LG Electronics USA, Inc.
Country: United States

Documents & Files

Select a file to view

Users Manual

Cover Letter(s)

External Photos

ID Label/Location Info

Internal Photos

Test Report

Test Setup Photos

Document Text Content (7 documents)

Cover Letter(s)

7 layers AG Aufsichtsratsvorsitzenderh Registergerichth registered in: Borsigstrasse 11 Chairman of the Supervisory Board: Düsseldorf, HRB 44096 40880 Ratingen, Germany Markus Becker USt-IdNr h VAT Nr: Phone: +49 (0) 2102 749 0 Vorstandh Board: DE 203159652 Fax: +49 (0) 2102 749 350 Dr. Hans-Jürgen Meckelburg www.7Layers.com René Schildknecht InterLab ® is a registered trademark of 7 layers AG FCC Measurement/Technical Report on GSM Module MC75 Siemens Cellular Engine MC75 Report Reference: 4_SIEM_0504_GSM_FCCm Test Laboratory: 7 layers AG Borsigstrasse 11 40880 Ratingen Germany email: [email protected] DAT-P-192/99-01 Note: The following test results relate only to the devices specified in this document. This report shall not be reproduced in parts without the written approval of the testing laboratory. Test report Reference: 4_SIEM_0504_GSM_FCCm Page 2 of 53 Table of Contents 0 Summary 3 0.1 Technical Report Summary 3 0.2 Measurement Summary 4 1 Administrative Data 6 1.1 Testing Laboratory 6 1.2 Project Data 6 1.3 Applicant Data 6 1.4 Manufacturer Data 6 2 Testobject Data 7 2.1 General EUT Description 7 2.2 EUT Main components 8 2.3 Ancillary Equipment 8 2.4 EUT Setups 8 2.5 Operating Modes 9 3 Test Results 10 3.1 RF Power Output 10 3.2 Frequency stability 14 3.3 Spurious emissions at antenna terminals 18 3.4 Field strength of spurious radiation 22 3.5 Emission and Occupied Bandwidth 26 3.6 Mobile emissions in base frequency range 30 4 Test Equipment 33 5 Photo Report 36 6 Setup Drawings 40 7 Annex 42 Measurement Plots Test report Reference: 4_SIEM_0504_GSM_FCCm Page 3 of 53 0 Summary 0.1 Technical Report Summary Type of Authorization Certification for a GSM cellular radiotelephone device Applicable FCC Rules Prepared in accordance with the requirements of FCC Rules and Regulations as listed in 47 CFR Ch.1 Parts 0 to 19 and Parts 20 to 69 (10-1-04 Edition). The following subparts are applicable to the results in this test report. Part 2 Subpart J - Equipment Authori...

External Photos

Annex I: band edge compliance Measurement plots Test report reference: 4_SIEM_0504_GSM_FCCn Date: 2006-01-06 Annex I: band edge compliance - Measurement plots Test report reference: 4_SIEM_0504_GSM_FCCn Page 2 of 5 A 36 dB Offset Unit dBm 1MAX1MA EXT Start 1.849 GHzStop 1.85 GHz100 kHz/ Ref Lvl 35 dBm Ref Lvl 35 dBm RBW 3 kHz VBW 3 kHz SWT 280 ms RF Att 20 dB IN1 -60 -50 -40 -30 -20 -10 0 10 20 30 -65 35 1 Marker 1 [T1] -16.24 dBm 1.84999800 GHz 1 [T1] -16.24 dBm 1.84999800 GHz D1 -13 dBm Date: 21.DEC.2005 13:53:47 Test: band edge compliance , Channel 512,PCS Annex I: band edge compliance - Measurement plots Test report reference: 4_SIEM_0504_GSM_FCCn Page 3 of 5 A 36 dB Offset Unit dBm EXT Ref Lvl 35 dBm Ref Lvl 35 dBm RF Att 20 dB 1MAX1MA Start 1.849 GHzStop 1.85 GHz100 kHz/ RBW 3 kHz VBW 3 kHz SWT 280 ms IN1 -60 -50 -40 -30 -20 -10 0 10 20 30 -65 35 1 Marker 1 [T1] -23.28 dBm 1.84997996 GHz 1 [T1] -23.28 dBm 1.84997996 GHz D1 -13 dBm Date: 21.DEC.2005 14:16:45 Test: band edge compliance , Channel 512, EDGE Annex I: band edge compliance - Measurement plots Test report reference: 4_SIEM_0504_GSM_FCCn Page 4 of 5 A 36 dB Offset Unit dBm 1MAX1MA Ref Lvl 35 dBm Ref Lvl 35 dBm RF Att 20 dB EXT Start 1.91 GHzStop 1.911 GHz100 kHz/ RBW 3 kHz VBW 3 kHz SWT 280 ms IN1 -60 -50 -40 -30 -20 -10 0 10 20 30 -65 35 1 Marker 1 [T1] -15.28 dBm 1.91000401 GHz 1 [T1] -15.28 dBm 1.91000401 GHz D1 -13 dBm Date: 21.DEC.2005 13:55:29 Test: band edge compliance, Channel 810, PCS Annex I: band edge compliance - Measurement plots Test report reference: 4_SIEM_0504_GSM_FCCn Page 5 of 5 A 36 dB Offset Unit dBm 1MAX1MA EXT Start 1.91 GHzStop 1.911 GHz100 kHz/ Ref Lvl 35 dBm Ref Lvl 35 dBm RBW 3 kHz VBW 3 kHz SWT 280 ms RF Att 20 dB IN1 -60 -50 -40 -30 -20 -10 0 10 20 30 -65 35 1 Marker 1 [T1] -23.20 dBm 1.91001804 GHz 1 [T1] -23.20 dBm 1.91001804 GHz D1 -13 dBm Date: 21.DEC.2005 14:19:37 Test: band edge compliance, Channel 810, EDGE

Contact Information

Applicant

David Kim(Team leader, LGEUS NA Policy & Regulatory Affairs)

[email protected]201-470-2696Fax: 201-816-2003

Technical Contact

PCTEST Engineering Lab., Inc.Randy Ortanez

[email protected]410-290-6652

Technical Specifications

#	Rule Parts	Frequency Range	Power Output
1	15C	2.40 GHz - 2.48 GHz	1.10 mW

Confidentiality

Long Term

Grant Notes

Output power is conducted. This device is approved for use in the handset described in this filing.

Other Applications from LG Electronics USA, Inc.

BEJNT-16Z90TS

Notebook Computer

DSS - Part 15 Spread Spectrum TransmitterOct 02, 2024

BEJSP-PEW8

Stylus Pen

DCD - Part 15 Low Power Transmitter Below 1705 kHzSep 26, 2024

BEJ-RSMV2

RF Module

FDS - Part 15 Field Disturbance SensorSep 24, 2024

ID Label/Location Info

7 layers AG Aufsichtsratsvorsitzenderh Registergerichth registered in: Borsigstrasse 11 Chairman of the Supervisory Board: Düsseldorf, HRB 44096 40880 Ratingen, Germany Markus Becker USt-IdNr h VAT Nr: Phone: +49 (0) 2102 749 0 Vorstandh Board: DE 203159652 Fax: +49 (0) 2102 749 350 Dr. Hans-Jürgen Meckelburg www.7Layers.com René Schildknecht InterLab ® is a registered trademark of 7 layers AG FCC Measurement/Technical Report on GSM Module MC75 Siemens Cellular Engine MC75 Report Reference: 4_SIEM_0504_GSM_FCCn Test Laboratory: 7 layers AG Borsigstrasse 11 40880 Ratingen Germany email: [email protected] DAT-P-192/99-01 Note: The following test results relate only to the devices specified in this document. This report shall not be reproduced in parts without the written approval of the testing laboratory. Test report Reference: 4_SIEM_0504_GSM_FCCn Page 2 of 49 Table of Contents 0 Summary 3 0.1 Technical Report Summary 3 0.2 Measurement Summary 4 1 Administrative Data 5 1.1 Testing Laboratory 5 1.2 Project Data 5 1.3 Applicant Data 5 1.4 Manufacturer Data 5 2 Testobject Data 6 2.1 General EUT Description 6 2.2 EUT Main components 7 2.3 Ancillary Equipment 7 2.4 EUT Setups 7 2.5 Operating Modes 8 3 Test Results 9 3.1 RF Power Output 9 3.2 Frequency stability 13 3.3 Spurious emissions at antenna terminals 17 3.4 Field strength of spurious radiation 21 3.5 Emission and Occupied Bandwidth 25 4 Test Equipment 29 5 Photo Report 32 6 Setup Drawings 36 7 Annex 38 Measurement Plots Test report Reference: 4_SIEM_0504_GSM_FCCn Page 3 of 49 0 Summary 0.1 Technical Report Summary Type of Authorization Certification for a GSM cellular radiotelephone device Applicable FCC Rules Prepared in accordance with the requirements of FCC Rules and Regulations as listed in 47 CFR Ch.1 Parts 0 to 19 and Parts 20 to 69 (10-1-04 Edition). The following subparts are applicable to the results in this test report. Part 2 Subpart J - Equipment Authorization Procedures, Certification § 2.1046 Measurem...

Internal Photos

FCC Test Report FCC Part 22, 24 / RSS 132, 133 For RD-AA8101-XX Panasonic Avionics Corportation Model Number: 117375-01 FCC ID:U6YRD-AA8101 TEST REPORT #: EMC_ PANA2_003_07001_FCC22_24 DATE: 2007-9-11 Bluetooth Qualification Test Facility (BQTF) FCC listed: A2LA accredited IC recognized # 3462B CETECOM Inc. 411 Dixon Landing Road Milpitas, CA 95035 U.S.A. Phone: + 1 (408) 586 6200 Fax: + 1 (408) 586 6299 E-mail: [email protected] http://www.cetecom.com CETECOM Inc. is a Delaware Corporation with Corporation number: 2113686 Board of Directors: Dr. Harald Ansorge, Dr. Klaus Matkey, Hans Peter May © Copyright by CETECOM Test Report #: EMC_ PANA2_003_07001_FCC22_24 Date of Report: 2007-9-11 Page 2 of 57 This report shall not be reproduced except in full without the written approval of: CETECOM, Inc. Table of Contents .....................................................................................................................................4 1ASSESSMENT ................................................................................................................5 2ADMINISTRATIVE DATA 2.1 ......................5 IDENTIFICATION OF THE TESTING LABORATORY ISSUING THE EMC TEST REPORT 2.2 ....................................................................................................5 IDENTIFICATION OF THE CLIENT 2.3 .....................................................................................5 IDENTIFICATION OF THE MANUFACTURER .................................................................................................6 3EQUIPMENT UNDER TEST (EUT) 3.1 SPECIFICATION OF THE EQUIPMENT UNDER TEST..........................................................................6 T 3.2 ............................................................6 IDENTIFICATION OF THE EQUIPMENT UNDER TEST (EUT) 3.3 ................................................................................6 IDENTIFICATION OF ACCESSORY EQUIPMENT .....................................

Test Setup Photos

Panasonic Avionics Corporation The CM installer must consider the following criteria: 1) Position the antenna such that it is oriented vertically The modem assembly is mounted to a bracket using Nylatch fasteners. The orientation of the modem should be such that the antenna points up or points down. Because of the high multi-path within the aircraft, the orientation may be offset slightly from vertical without a substantial penalty in performance. 2) Position the antenna such that it is at least 2 cm from persons The modem assembly should be mounted behind a panel as a barrier to any human contact. There should be no possibility that the antenna could be contacted and possibly damaged. Because the antenna is hidden behind a panel, sufficient clearance must be provided to ensure inadvertent, incidental human exposure within 2 cm to any part of the antenna is not possible. 3) Provide a drip-shield if the CM is exposed to dripping water The modem assembly is not water-proof. If installed in a location where dripping water is possible, a drip shield must be installed above the modem, and appropriate drip loops applied to the cable assembly connecting to J1. 4) Avoid locations enclosed in conductive material The aircraft fuselage provides a conductive barrier to free-space radiation. The cabin windows, the doors and hatches, and other small penetrations provide a limited aperture for the cellular signal to propagate. In many cases, the modem assembly will be installed within a cabin monument or cabinet. It is strongly encouraged to have a minimum of one non-conductive surface near the cell modem (within the cabinet or monument) to allow for acceptable performance. While placing the modem wholly within a conductive enclosed monument has been shown to operate, the additional path loss will limit service only to airports with the strongest cellular service coverage. 5) Favor locations centrally positioned within large, open cabin areas Signal strength surveys have shown a c...

Users Manual

Omron Automotive Electronics Korea Co., Ltd. Ace Techno 10-cha 701, 470-5, Gasan-dong, Geumcheon-gu, Seoul, 153-789, Korea Tel. 82-2-850-5789 Fax. 82-2-850-5808 Date: September 2, 2007 ETS Product Service AG Certification Division Storkower Str. 38c, 15526 Reichenwalde b. Berlin, Germany To whom it may concern: We, the undersigned, hereby authorize SGS Testing Korea Co., Ltd. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by SGS Testing Korea Co., Ltd. on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). In authorizing SGS Testing Korea Co., Ltd. as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in c...

BEJVX9100

Application Details

Documents & Files

Users Manual

Cover Letter(s)

External Photos

ID Label/Location Info

Internal Photos

Test Report

Test Setup Photos

Cover Letter(s)

External Photos

Contact Information

Applicant

Technical Contact

Technical Specifications

Other Applications from LG Electronics USA, Inc.

ID Label/Location Info

Internal Photos

Test Report

Test Setup Photos

Users Manual

Test Firm