BOU-AEA3100MICWireless microphone

www.philips.com/welcome User manual Always there to help you Register your product and get support at AEA3100/17 AEA3100/37 AEA3000/07 AEA3000/37 1EN Contents 1 Important 2 Safety 2 Notice 3 2 Your Wireless Microphone and Bluetooth Docking Speaker 6 Introduction 6 What's in the box 6 Overview of the unit 6 3 Get started 8 Connect power 8 Swith on the Bluetooth docking speaker 8 Install/replace microphone batteries 8 4 Play 10 Sing along through the wireless microphone 10 Play from a Bluetooth enabled device 11 Play and charge your iPad through the dock connector directly 12 Play from an external device 13 5 Product information 14 Specifications 14 6 Troubleshooting 15 MAV-AEA7000-Troubleshooting- Failed to set up connection between the microphone and speaker 15 2EN 1 Important Safety This 'bolt of lightning' indicates uninsulated material within the device may cause an electrical shock. For the safety of everyone in your household, please do not remove the covering. The 'exclamation mark' calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems. WARNING: To reduce the risk of fire or electric shock, the device should not be exposed to rain or moisture and objects filled with liquids, such as vases, should not be placed on the device. CAUTION: To prevent electric shock, fully insert the plug. (For regions with polarized plugs: To prevent electric shock, match wide blade to wide slot.) Important Safety Instructions a Read these instructions. b Keep these instructions. c Heed all warnings. d Follow all instructions. e Do not use this apparatus near water. f Clean only with dry cloth. g Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. h Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. i Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. j Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. k Only use attachments/accessories specified by the manufacturer. l Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. m Unplug this apparatus during lightning storms or when unused for long periods of time. 3EN n Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. o Battery usage CAUTION – To prevent battery leakage which may result in bodily injury, property damage, or damage to the unit: • Install all batteries correctly, + and - as marked on the unit. • Remove batteries when the unit is not used for a long time. • Perchlorate Material-special handling may apply. See www.dtsc.ca.gov/ hazardouswaste/perchlorate. p Apparatus shall not be exposed to dripping or splashing, keep it away from direct sunlight,naked flames or heat. Warning • Never remove the casing of this apparatus. •Never lubricate any part of this apparatus. •Never place this apparatus on other electrical equipment. •Keep this apparatus away from direct sunlight, naked flames or heat. •Ensure that you always have easy access to the power cord, plug or adaptor to disconnect this apparatus from the power. Risk of overheating! Never install this apparatus in a confined space. Always leave a space of at least four inches around this apparatus for ventilation. Ensure curtains or other objects never cover the ventilation slots on this apparatus. Information about the use of batteries: Caution • Risk of leakage: Only use the specified type of batteries. Do not mix new and used batteries. Do not mix different brands of batteries. Observe correct polarity. Remove batteries from products that are not in use for a longer period of time. Store batteries in a dry place. •Risk of injury: Wear gloves when handling leaking batteries. Keep batteries out of reach of children and pets. •Risk of explosion: Do not short circuit batteries. Do not expose batteries to excessive heat. Do not throw batteries into the fire. Do not damage or disassemble batteries. Do not recharge non-rechargeable batteries. Notice Notice of compliance Modifications The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC & RSS compliance statement This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: a This device may not cause harmful interference, and b This device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement This equipment complies with FCC’s and IC’s RF radiation exposure limits set forth for an uncontrolled environment. The antenna(s) used for this transmitter must be installed and operated to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. q 4EN any other antenna or transmitter. Installers…

Text truncated - open the document above for the full version.

RF_160, Issue 02 Declaration of Authorization We Name: Philips Consumer Lifestyle Address: 5/F, Philips Electronics Building, 5 Science Park East Avenue, Hong Kong Science Park, City: Shatin, New Territories, Country: Hong Kong Declare that: Name Representative of agent: Ms. Cathy Wang Agent Company name: Neutron Engineering, Inc. Address: No.3 Jinshagang 1 st Road, Shixia, Dalang Town City: Dong Guan Country: China is authorized to apply for Certification of the following product(s): Product description: wireless microphone Model: AEA3100MIC/17; AEA3000MIC/07; AEA3000MIC/37; AEA3100MIC/37 Trademark: PHILIPS on our behalf. Date: 2012-11-1 City: Shatin, New Territories, Name: Benson Lai Function: Lead Engineer,Safety,Compliance and Regulatory Signature: .

FCC, Request for non-disclosure Date: 10-AUG-09 RF_501, Issue 5 Page 1 of 1 Company Name: Philips Consumer Lifestyle Address: 5/F, Philips Electronics Building 5 Science Park East Avenue, Hong Kong Science Park City: Shatin, New Territories Country: Hong Kong To: Telefication B.V., Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Request for confidentiality FCC ID: BOU-AEA3100MIC Reference number: AEA3100MIC/17; AEA3000MIC/07; AEA3000MIC/37; AEA3100MIC/37 Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, a pplicant hereby requests Short-Term Confidential treatment of the following materials (note 1): Internal Photos User’s Manual Test Set-up Photos External Photos Justification: Planned Release Date STC: (notes 2, 3, 4, 5) Date: 2011-11-1 Name and signature of applicant: Benson Lai Notes: 1) A document or type of document can only have ONE type of confidentiality! 2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)! 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this! 5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period

Philips Consumer Lifestyle Model Declaration Letter We, the undersigning company Name: Philips Consumer Lifestyle Address: 5/F, Philips Electronics Building, 5 Science Park East Avenue, Hong Kong Science Park, City: Shatin, New Territories, Country: Hong Kong Hereby confirm that the following products: Product description: wireless microphone Model: AEA3100MIC/17; AEA3000MIC/07; AEA3000MIC/37; AEA3100MIC/37 Trademark: PHILIPS All versions of the Model AEA3100MIC/17 and AEA3000MIC/07; AEA3000MIC/37; AEA3100MIC/37 is electrically equal and only differ in model name because of marketing purpose. Name: Philips Consumer Lifestyle Telephone +85224894406 Fax No.: +85224011482 E-mail: [email protected] Signature: ________________________ Name: Benson Lai

Neutron Engineering Inc. Project No.: 1209C191 Page 2 of 7 Neutron Engineering Inc. Project No.: 1209C191 Page 3 of 7 Neutron Engineering Inc. Project No.: 1209C191 Page 4 of 7

位置:贴于'RQJOHᑩ䚼 PACKING INSTRUCTION Microphoe label FCC,IC labl 位置:贴于麦克风底部 Main label

Neutron Engineering Inc. Project No.: 1208C254 Page 5 of 7 Neutron Engineering Inc. Project No.: 1208C254 Page 6 of 7 Neutron Engineering Inc. Project No.: 1208C254 Page 7 of 7

Neutron Engineering Inc. FCC RF EXPOSURE REPORT FCC ID: BOU-AEA3100MIC Project No. : 1209C191 Equipment : Wireless microphone Model : AEA3100MIC/17; AEA3000MIC/07; AEA3000MIC/37; AEA3100MIC/37 Applicant : Philips Consumer Lifestyle Address : 5/F, Philips Electronics Building,Shatin, New Territories, Hong Kong, China According: : FCC Guidelines for Human Exposure IEEE C95.1 Neutron Engineering Inc. No.3, Jinshagang 1st Road, ShiXia, Dalang Town, Dong Guan, China. TEL : (0769) 8318-3000 FAX : (0769) 8319-6000 Neutron Engineering Inc. MPE CALCULATION METHOD: Calculation Method of RF Safety Distance: where: S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna Ant. Brand name Model Name Antenna TypeConnector Gain (dBi) 1 N/A N/A PIFA Antenna N/A -0.32 TEST RESULTS EUT： Wireless microphone Model Name ： AEA3100/17 Temperature： 25 °C Relative Humidity： 60 % Pressure： 1012 hPa Test Voltage ： AC 120V/60Hz Test Mode ： CH00/CH39/CH78-1Mbps Antenna Gain (dBi) Antenna Gain (numeric) Peak Output Power (dBm) Peak Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Te s t Result -0.32 0.9290 2.01 1.5885 0.000225811 Complies -0.32 0.9290 1.94 1.5631 0.000222201 Complies -0.32 0.9290 1.44 1.3932 0.000198041 Complies EUT： Wireless microphone Model Name ： AEA3100/17 Temperature： 25 °C Relative Humidity： 60 % Pressure： 1012 hPa Test Voltage ： AC 120V/60Hz Test Mode ： CH00/CH39/CH78-3Mbps Antenna Gain (dBi) Antenna Gain (numeric) Peak Output Power (dBm) Peak Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Te s t Result -0.32 0.9290 1.50 1.4125 0.000261191 Complies -0.32 0.9290 1.86 1.5346 0.000283761 Complies -0.32 0.9290 0.72 1.1803 0.000218251 Complies

Neutron Engineering Inc. Report No.: NEI-FICP-1-1209C191 Page 1 of 107 FCC/IC Radio Test Report FCC ID: BOU-AEA3100MIC IC: 135M-AEA3000MIC This report concerns (check one) : Original Grant Class II Change Issued Date : Oct. 29, 2012 Project No. : 1209C191 Equipment : wireless microphone Model Name for FCC : AEA3100MIC/17; AEA3000MIC/07; AEA3000MIC/37; AEA3100MIC/37 Model Name for IC : AEA3000MIC/07; AEA3100MIC/17 Applicant : Philips Consumer Lifestyle Address : 1600 Summer Street ,Stamford, CT 06905,United States Tested by: Neutron Engineering Inc. EMC Laboratory Date of Receipt: Sep. 01, 2012 Date of Test: Sep. 01, 2012 ~ Oct. 28, 2012 Testing Engineer : (David Mao) Technical Manager : (Leo Hung) Authorized Signatory : (Steven Lu) Neutron Engineering Inc. No.3,Jinshagang 1st Road, ShiXia, Dalang Town, Dong Guan, China. TEL : (0769) 8318-3000 FAX : (0769) 8319-6000 Neutron Engineering Inc. Report No.: NEI-FICP-1-1209C191 Page 2 of 107 Declaration Neutron represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement Laboratory (NML) of CHINA, or National Institute of Standards and Technology (NIST) of U.S.A. Neutron's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. Neutronshall have no liability for any declarations, inferences o r generalizations drawn by the client or others from Neutron issued reports. Neutron’s reports must not be used by the client to claim product endorsement by the authorities or any agency of the Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and Neutron-self, extracts from the test report shall not be reproduced except in full with Neutron’s authorized written approval. Neutron’s laboratory quality assurance procedures are in compliance with the ISO Guide 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Neutron Engineering Inc. Report No.: NEI-FICP-1-1209C191 Page 3 of 107 Table of Contents Page 1 . CERTIFICATION 6 2 . SUMMARY OF TEST RESULTS 7 2.1 TEST FACILITY 8 2.2 MEASUREMENT UNCERTAINTY 8 3 . GENERAL INFORMATION 9 3.1 GENERAL DESCRIPTION OF EUT 9 3.2 DESCRIPTION OF TEST MODES 11 3.3 TABLE OF PARAMETERS OF TEXT SOFTWARE SETTING 11 3.4 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 12 3.5 DESCRIPTION OF SUPPORT UNITS 13 4 . EMC EMISSION TEST 14 4.1 CONDUCTED EMISSION MEASUREMENT 14 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS 14 4.1.2 MEASUREMENT INSTRUMENTS LIST AND SETTING 14 4.1.3 TEST PROCEDURE 15 4.1.4 DEVIATION FROM TEST STANDARD 15 4.1.5 TEST SETUP 15 4.1.6 EUT OPERATING CONDITIONS 15 4.1.7 TEST RESULTS 16 4.2 RADIATED EMISSION MEASUREMENT 17 4.2.1 RADIATED EMISSION LIMITS 17 4.2.2 MEASUREMENT INSTRUMENTS LIST ANS SETTING 18 4.2.3 TEST PROCEDURE 19 4.2.4 DEVIATION FROM TEST STANDARD 19 4.2.5 TEST SETUP 20 4.2.6 EUT OPERATING CONDITIONS 21 4.2.7 TEST RESULTS (BETWEEN30 – 1000 MHZ) 22 4.2.8 TEST RESULTS (ABOVE 1000 MHZ) 26 5 . NUMBER OF HOPPING CHANNEL 62 5.1 APPLIED PROCEDURES / LIMIT 62 5.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 62 5.1.2 TEST PROCEDURE 62 5.1.3 DEVIATION FROM STANDARD 62 5.1.4 TEST SETUP 62 5.1.5 EUT OPERATION CONDITIONS 62 5.1.6 TEST RESULTS 63 6 . AVERAGE TIME OF OCCUPANCY 65 Neutron Engineering Inc. Report No.: NEI-FICP-1-1209C191 Page 4 of 107 Table of Contents Page 6.1 APPLIED PROCEDURES / LIMIT 65 6.1.1 MEASUREMENT INSTRUMENTS LIST 65 6.1.2 TEST PROCEDURE 65 6.1.3 DEVIATION FROM STANDARD 65 6.1.4 TEST SETUP 66 6.1.5 EUT OPERATION CONDITIONS 66 6.1.6 TEST RESULTS 67 7 . HOPPING CHANNEL SEPARATION MEASUREMENT 79 7.1 APPLIED PROCEDURES / LIMIT 79 7.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 79 7.1.2 TEST PROCEDURE 79 7.1.3 DEVIATION FROM STANDARD 79 7.1.4 TEST SETUP 79 7.1.5 EUT OPERATION CONDITIONS 79 7.1.6 TEST RESULTS 80 8 . BANDWIDTH TEST 84 8.1 APPLIED PROCEDURES / LIMIT 84 8.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 84 8.1.2 TEST PROCEDURE 84 8.1.3 DEVIATION FROM STANDARD 84 8.1.4 TEST SETUP 84 8.1.5 EUT OPERATION CONDITIONS 84 8.1.6 TEST RESULTS 85 9 . PEAK OUTPUT POWER TEST 89 9.1 APPLIED PROCEDURES / LIMIT 89 9.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 89 9.1.2 TEST PROCEDURE 89 9.1.3 DEVIATION FROM STANDARD 89 9.1.4 TEST SETUP 89 9.1.5 EUT OPERATION CONDITIONS 89 9.1.6 TEST RESULTS 90 10 . ANTENNA CONDUCTED SPURIOUS EMISSION 94 10.1 APPLIED PROCEDURES / LIMIT 94 10.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 94 10.1.2 TEST PROCEDURE 94 10.1.3 DEVIATION FROM STANDARD 94 10.1.4 TEST SETUP 94 10.1.5 EUT OPERATION CONDITIONS 94 10.1.6 TEST RESULTS 95 Neutron Engineering Inc. Report No.: NEI-FICP-1-1209C191 Page 5 of 107 Table of Contents Page 11 . EUT TEST PHOTO 107 Neutron Engineering Inc. Report No.: NEI-FICP-1-1209C191 Page 6 of 107 1. CERTIFICATION Equipment : wireless microphone Brand Name : PHILIPS Model Name for FCC : AEA3100MIC/17; AEA3000MIC/07; AEA3000MIC/37; AEA3100MIC/37 Model Name for IC : AEA3000MIC/07; AEA3100MIC/17 Applicant : Philips Consumer Lifestyle Factory : Zhong Shan City LI TAI Electronic Industrial Co., Ltd Address : No. 3 Industrial Park, Wuguishan Town, Zhongshan, Guangdong, China Date of Test : Sep. 01, 2012 ~ Oct. 28, 2012 Test Item : ENGINEERING SAMPLE Standards : FCC Part15, Subpart C(15.247) / ANSI C63.4 : 2009 FCC Public Notice DA 00-705, March 30, 2000. Canada RSS-210:2010 The above equipment has been tested and found compliance with the requirement of the relative standards by Neutron Engineering Inc. EMC Laboratory. …

Text truncated - open the document above for the full version.

Neutron Engineering Inc. Report No.: NEI-FICP-1-1209C191 Page 107 of 107 11. EUT TEST PHOTO Radiated Measurement Photos