BOU-DS6800WFidelio SoundSphere Wireless Speakers with AirPlay

Register your product and get support at www.philips.com/welcome EN User manual 3 Contents1 Important 4 Safety 4 Notice 5 2 Your Entertainment System 8 Introduction 8 What’s in the box 8 What else you need 8 Overview of the main speaker 9 Overview of the remote control 10 3 Prepare 11 Connect 11 Prepare the remote control 11 4 Connect to your home Wi-Fi network for AirPlay 13 Scenario 1: Connect to a WPS router 13 Scenario 2: Connect to a non-WPS router 14 5 Play 22 Stream audio from your iTunes music library to DS6800W 22 Control play 23 Use advanced sound settings 23 Play/charge your iPod/iPhone/iPad through USB socket 24 Play from an external device 24 6 Update firmware 26 Download the update file 26 Update from the configuration page 26 7 Product information 28 Specifications 28 8 Troubleshooting 29 EN 4 5 k Only use attachments/accessories specified by the manufacturer. l Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. m Unplug this apparatus during lightning storms or when unused for long periods of time. n Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. o Battery usage CAUTION – To prevent battery leakage which may result in bodily injury, property damage, or damage to the unit: Install all batteries correctly, + and - as marked on the unit. Remove batteries when the unit is not used for a long time.Perchlorate Material-special handling may apply. See www.dtsc.ca.gov/ hazardouswaste/perchlorate. p Apparatus shall not be exposed to dripping or splashing, keep it away from direct sunlight,naked flames or heat. ••• 1 ImportantSafetyImportant Safety Instructionsa Read these instructions. b Keep these instructions. c Heed all warnings. d Follow all instructions. e Do not use this apparatus near water. f Clean only with dry cloth. g Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. h Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. i Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. j Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. Installers must ensure that 20cm separation distance will be maintained between the device (excluding its handset) and users.FCC rulesThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.Consult the dealer or an experienced radio/TV technician for help. Canada: This Class B digital apparatus complies with Canadian ICES-003. •••• Warning Never remove the casing of this apparatus. Never lubricate any part of this apparatus.Never place this apparatus on other electrical equipment.Keep this apparatus away from direct sunlight, naked flames or heat. Ensure that you always have easy access to the power cord, plug or adaptor to disconnect this apparatus from the power. ••••• Risk of overheating! Never install this apparatus in a confined space. Always leave a space of at least four inches around this apparatus for ventilation. Ensure curtains or other objects never cover the ventilation slots on this apparatus.NoticeNotice of complianceModificationsThe user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.FCC & RSS compliance statementThis device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:a This device may not cause harmful interference, and b This device must accept any interference received, including interference that may cause undesired operation.FCC Radiation Exposure StatementThis equipment complies with FCC’s and IC’s RF radiation exposure limits set forth for an uncontrolled environment. The antenna(s) used for this transmitter must be installed and operated to provide a EN EN 6 7 separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.) Your system consists of materials which can be recycled and …

Text truncated - open the document above for the full version.

 
      ~pmp      

  
 !" ##$%&%'()(*(+)% &! , !&  !-& ! & . //  //  //  &// tZUZ}   iyZUZ} XU_} iyXUY} hZUZ} iZUZ} jZUZ} 0-! 1%2 ~pmp ..
!,0
/!.0
-!
ZUZ} 34 3!4 3/ ##'56%' &7%*1%' %8(9:%'    ;<(5(9:+$ wv~ly %=+'1 )7%'    , & & &   >75:97+:7(%5:$%*)'5:(*+*)5'2)<  ,!?.- &@A0 & & &!.-0 ! !=B%' @"!0 #9'+<% !.! //! A//! #9'+<% CA A//0 /&/! &- 0! /&/ 4 4 /  ..
!,0
/!.0
-!
!  & &!,&.&- &!
./ &- 0! ./ =#$(D(%'  =#$(D(%'  E%%)%' E55D%' !& 0&-0/! & && 0.    0 & ..
!
,0
0
!

FCC Authorization Letter Number: CF304 Version: V01 Date: 01-02-2010 We, (the approval holder) Company name Philips Consumer Lifestyle Addresss 33029 East Governor John Sevier Hwy. Knoxville, Tennessee 37914 City Knoxville Country United States declare that the following representative (agent): Name (person) Wendell Johnson Company name Philips Consumer Lifestyle Addresss 33029 East Governor John Sevier Hwy. Knoxville, Tennessee 37914 City Knoxville Country United States is hereby authorized to apply the following equipment for certification on our behalf: Product Description Fidelio SoundSphere Wireless speakers with AirPlay Type or Model(s) DS6800W/37 Tradename or Brand(s) PHILIPS We also authorize Teleconformity, Mr. M. Koop, (address: Rietven 31, 7534NH Enschede, Netherlands) to process (sign and apply for) this application. Attestation: City and Country: Date: Name: (this must be a person) Function: Signature: (or official company stamp) Hongkong,China 09-14-2011 Benson Lai Lead Engineer, Safety, Compliance and Regulatory

General Appearance of the EUT

SoundSphere Wireless speaker with AirPlay Model No.: DS6800W/37 Serial No.:AJ1A11xxxx XXXXXXXXXXXXX XXXXXXXXXXXXX MODEL DS6800W/37 XX XX XXXXXXXXXXXXX 8670 000 81006 Model No.: DS6800W/37 Serial No.:AJ1A11xxxx 廖绮萍 2011-08-4 DS6800W/37 DS6800W/37 0.1 XXXXXXXXX XXX AJ1A11xx DS6800W xxxxxxxx DS6800W/37 202.8 42X34 FCC ID:BOU-DS6800W IC:135M-DS6800W COMPLIES WITH FCC PART 15 RULES COMPLIES WITH RSS-210 OF INDUSTRT CANADA PHILIPS CONSUMER LIFESTYLE P.O.BOX 10313 Stamford,CT 06 904 彩盒贴纸 黑底白字 MODEL DS6800W/37 SoundSphere Wireless speaker with AirPlay 8670 000 81006 XX XX Model No.: DS6800W/37 Serial No.:AJ1A11xxxx IPOD认证贴纸 黑底白字 90X90MM 41011696

Part Name:label主机贴纸) Size：42×34mm Material:label Color:黑底白字 1 位置:贴于主音箱底壳 PACKING INSTRUCTION 1PC D41011529 生产日期由IQC跟周期一起打印

DS6800W Airplay Dock Instruction DS6800W is a USB/MP3-IN with Airplay dock product. The main work principle can divided into 4 parts:the control part,the power part, the audio part, the Airplay part. The control part takes charge of the control of the product which uses LM38800 as its MCU. The MCU takes charge of some parts including Keys,LED,power management,Software upgrade,bus mastering and so on. The audio source coming from Ipod,iPhone,iPad via USB scoket is ARM decoded by the D/A(PCM1808).The ARM system also control the Airplay part(DM870) by Apple certificate CP2.0B IC. The main power of the system using 20V power supply by DC/DC adapter,power control IC(TPS54286) and IC(AMS1117)is transformed to several type as20V, 5V,3.3V, 1.2V,1.8V etc. All of the audio signals produced by the audio processor IC(CS48520), then these audio signals flow to the control IC(STA339BW) ,finally connecting with the tweeter and woofer speakers. The Airplay part used BridgeCo CR870-2I,main IC is DM870. Main specification as below: Operation Frequency: 2.4GHz(2412-2472MHz) Modulation:802.11b:DSSS(CCK/QPSK/BPSK) 802.11g:OFDM(BPSK/QPSK/16QAM/64QAM) Antenna Type:RG-178 Coaxial Cable

FCC ID : BOU-DS6800W (Portable device) According to §15.247(e)(i) and §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. According to KDB 447498 (2)(a)(i) Frequency Range Low Frequency (MHz) High Frequency(MHz) Center frequency (MHz) 60/f SAR Limitation (mw) 2412 2462 2437 24.88 Maximum measured transmitter power: 802.11b Conducted Power (mw) 6.31 Maximum measured transmitter power: 802.11g Conducted Power (mw) 6.52 Threshold at which no SAR required is 24.88 mw. Maximum Tx power is 6.52mw EIRP. Conclusion: No SAR is required. SIMULTANEOUS TRANSMISSION EVALUATION

11 22 33 44 55 66 D D C C B B A A TitleSize Document Number Rev Date: Sheet of JB-MICRO MODULE V1.0 WLAN A 6 8 NABU-PD2,Lite-On Technology Corp. SW1 SW1SW0 SW0 NPD_RF NPD_RF C171100pF/50V R14410K C162 0.01uF/16V R14B 51ohm R1275.6Kohm R14310K R14D 51ohm UNBAL 1 G 2 BAL 3 BAL 4 G 5 NC 6 U8HHM1711D1 R13D 51ohm C170100pF/50V C164470pF/50V C181 0.01uF/16V R134 100ohm C149100pF/50V C166470pF/50V R14C 51ohm R13A 51ohm C1820.01uF/16V R128100ohm R139 0ohm C1931nF/16V R1255.6Kohm C161 0.01uF/16V 1 2 3 4 Y350MHz TP16 C180 0.01uF/16V C1720.22uF/10V C178 0.01uF/16V C228NC C1480.1uF/16V C183 0.01uF/16V C186 0.01uF/16V C19110pF/50V C1850.01uF/16V C1560.1uF/16V C151470pF/50V 1 2 BLM18PG121SN1 L19 BLM18PG121SN1 R140 100ohm C14410UF/10V TP12 C1921nF/16V C1400.01uF/16V R136 100ohm R123120ohm NC 1 RFIN 2 RFIN 3 NC 4 VREF1 6 VREF2 7 VCC1 16 NC 15 VCC2 14 NC 13 VCC3 12 VCCB 5 RFOUT 11 REFOUT 10 DET 9 DET_REF 8 GND 17 U5SST12LP15A-QVCE R27C 220ohm C1941nF/16V TP14 R137 100ohm TP11 1 2 BLM18PG121SN1 L18 BLM18PG121SN1 EN 2 POK 1 VIN 3 VCNTL 4 NC 5 VOUT 6 FB 7 GND 8 EP 9 U11 APL5910KAI-TRG TP17 R27D 220ohm TP41 R18910K/NP C20010pF/50V R148 24K ohm TP15 R133 51ohm TP13 C19910pF/50V C15210UF/10V C1420.1uF/16V R135 100ohm C188 3.3pF/50V C19615pF/50V RF2 1 GND 2 RF1 3 VC1 4 RFC 5 VC2 6 U26HWS408 2 2 1 1 3 3 CON1 X20279-001E-01 C187 3.3pF/50V R1413K C175 0.01uF/16V C189 1nF/16V R14210K C15810pF/NP TP40 TP18 C15510UF/10V R132 150ohm TP19 C1500.22uF/10V C1670.22uF/10V 12 3.9nH 0.3nH ∮ L233.9nH 0.3nH∮ C14310UF/10V R147 0ohm R1265.6Kohm R129100ohm R146 0ohm/NP R12468ohm GND 1 RF_OUT 2 GND 3 RF_IN 4 U23 BF1608-L2R4DAAT/LF C160 0.01uF/16V 1 2 4.7nH +-0.3nH L22 4.7nH +-0.3nH C15410UF/10V NC 2 GND 5 GND 3 GND 1 NC 6 GND 7 IN 8 OUT 4 U22LF2012-B2R4FAAT/LF C17610pF/50V C19518pF/50V RF_ENABLE 47 NRESET 43 N_HISSTXQ 23 P_HISSTXQ 24 N_HISSTXI 25 P_HISSTXI 26 N_HISSCLK 27 P_HISSCLK 28 N_HISSRXQ 29 P_HISSRXQ 30 N_HISSRXI 31 P_HISSRXI 32 N_XTALIN 10 P_XTAL 11 VDDDIV 3 VDDCP 6 VDDXO 12 VDDPLL 13 VDDCODEC 16 VDDDIG1 21 VDDHISS 22 VDDDIG2 33 VDDREG 4 VDDDVCO 15 VDDA 8 VDDPPA2G 35 VDDTXBB 42 VDDRX 46 VDDPADAC 36 PADAC2G 37 TXOUT2G 34 N_RXIN2G 1 P_RXIN2G 2 RF_SW0 17 RF_SW1 18 RF_SW2 19 RF_SW3 20 NC 38 NC 41 NC 40 NC 45 NC 44 VPVCO 5 DPLLTP 14 TESTDIG 7 OUTRSSI 9 PLLIP 48 PADDLE 49 GND_PPA 39 U76201c C19715pF/50V C1902.4PF/50V C1450.1uF/16V C174 0.01uF/16V C15310UF/10V R138 0ohm C157100pF/50V C1980.01uF/16V R14910K C20110pF/50V R172 33K ohm C184 0.01uF/16V R13B 51ohm C227NC C226 10pF/50V R15 0ohm C14110UF/10V C1650.22uF/10V R14A 51ohm C1461uF/6.3V C1730.22uF/10V RFTXQP A4 RFTXQN B4 RFTXIP A5 RFTXIN B5 RFRXQP A12 RFRXQN B12 RFRXIP A13 RFRXIN B13 RFCLKP A11 RFCLKN B11 RFEN B10 NRFRES B9 LVDREF B8 U1GDM870 C1690.22uF/10V C16810UF/10V GND 2 ANT 1 NC 3 ANT R13C 51ohm C177 0.01uF/16V C14710UF/10V R16 0ohm GND GND GND GND GND GND GND GND W3V3 GND GND VCC3 GND VCC2 W3V3 W3V3_PA GND GND GNDGND GND GND GND 1V9HISS 1V9HISS GND GND GND GND GND GND GND W3V3 W3V3 GND VCC1 GND GND GND GND GND GND GND W3V3_RFIC GND 1V9 VCC3VCC2VCC1 GND GND GND GND GND GND GND GND GND GND DM3V3 DM3V3 DM3V3 GND GND GNDGND GND GND GND 1V9HISS 1V9_OUTSIDE GND GND GND GND GND GND DM3V3 GND GND GND GND NPD_RF Off-page Connection Vout=0.8 x (1+33/24)= 1.9V 120R@100MHz The default 1.9V powersullpy for U11 5/22Change Risister tofollow DM870 moduledesign 1V9 LDO for Wifi power 11 22 33 44 55 66 D D C C B B A A TitleSize Document Number Rev Date: Sheet of JB-MICRO MODULE V1.0 Ethernet/USB A 5 8 NABU-PD2,Lite-On Technology Corp. NRESET_ETH ETH_LED_ACTETH_TX+ETH_RX+ETH_CTETH_TX-ETH_RX-ETH_LED_SPEEDMIITXCLKMIITXD1MIIRXD1MIICRSMIITXD0MIICOLMIITXERMIIRXD0 USB_DPUSB_DN MIIRXDVMIIRXER MIIRXD0MIIRXD1MIITXD0MIITXD1MIITXERMIICOLMIICRS USBVBUSDRVUSB_VBUS USB_VBUSUSBVBUSDRV USB_DNUSB_DP MIITXCLK C224 0.1uF/16V R100 100ohm R17 0ohm R115 51ohm C225 0.1uF/16V C1190.1uF/16V R107 2.7K ohm R19 0ohm R113 100ohm R103 100ohm R98 100ohm MIIRXD0 W12 MIIRXD1 Y12 MIIRXD2 W13 MIIRXD3 Y13 MIIRXCLK V12 MIIRXDV V14 MIIRXER V13 MIITXD0 W10 MIITXD1 Y10 MIITXD2 W11 MIITXD3 Y11 MIITXCLK V11 MIITXEN V9 MIITXER V10 MIICOL W14 MIICRS Y14 MIIMDC V15 MIIMDIO W15 MIIPHYCLK Y15 USB_D+ B1 USB_D- A1 USBVBUSDRV F2 USBVBUS D2 USBID E2 USBREXT C2 USBATST C5 USBXTALI C4 USBXTALO C3 U1CDM870 TP1 R108 100ohm TP35 R174 100ohm TP9 TP36 R104 100ohm/NP C9NC R175 100ohm R112 100ohm R102 100ohm C1204.7uF/10V R105 9.1Kohm/NP 1 2 BLM18PG121SN1 L12 BLM18PG121SN1 R106 100ohm R111 1.5K GND E3V3 GND E3V3 GND GND GND DM3V3 GND GND GND ETH_LED_SPEEDETH_LED_ACTETH_RX-ETH_TX-ETH_TX+ETH_CTETH_RX+MIITXD1MIITXD0MIIRXD0MIITXERMIITXCLKMIICOLMIICRSMIIRXD1 NRESET_ETH USB_DPUSB_DN USBVBUSDRVUSB_VBUS Off-page Connection 11 22 33 44 55 66 D D C C B B A A TitleSize Document Number Rev Date: Sheet of JB-MICRO MODULE V1.0 Memory (SDRAM/Flash) A 4 8 NABU-PD2,Lite-On Technology Corp. NFRE ADD3 ADD4ADD5ADD7ADD8ADD9ADD10ADD11ADD12 MEMCKE NCS1_SDRAM NWE NCS0_IDE NCS2NCS3NOENWAIT DATA0DATA1DATA2DATA3DATA7DATA5DATA4DATA11DATA10DATA9DATA8DATA14DATA13DATA12 ADD15ADD17ADD20ADD16ADD14ADD21ADD13ADD2ADD0 NWAIT A23 NFCE0 NCS3NCS2 ADD19ADD20ADD21A22 A22A23 ADD22ADD23ADD6ADD18ADD19 FCLEFALEFALE NFRBNWENOE DATA15DATA6 NFRB ADD1 FCLE FCLEFALE DATA9DATA4DATA6DATA5DATA10DATA8DATA13DATA11DATA7DATA1DATA14DATA12DATA2DATA3DATA15DATA0 NCS1_SDRAMNCS0_IDEMEMCKE R72 100ohm R64B 51ohm R69D 51ohm R84 4.7K C1100.1uF/16V R70A 51ohm TP37 TP6 R67C 51ohm C113470pF/50V R63D 51ohm C114470pF/50V R65 4.7K/NP R69A 51ohm R67A 51ohm TP7 R70C 51ohm C1051500PF/50V R68A 51ohm R62D 51ohm C1060.1uF/16V R73 51ohm R67D 51ohm C115470pF/50V R76 100ohm R66A 51ohm R75 100ohm R71D 51ohm C1080.1uF/16V R804.7K R68B 51ohm C116470pF/50V R74 100ohm R78 4.7K/NP R814.7K/NP R66C 51ohm 1 2 HCB1005M-121 L37HCB1005M-121 TP38 1 8 2 7 3 6 4 5 R124.7K 8P4R C1121500PF/50V R63C 51ohm C117470pF/50V R85 4.7K FD0 U17 FD1 T17 FD2 R17 FD3 Y18 FD4 W18 FD5 V18 FD6 Y19 FD7 Y20 FALE U16 FCLE Y17 NFCE0 Y16 NFRB V17 NFRE W17 NFWE V16 NFWP W16 D0 P18 D1 P19 D2 P20 D3 R18 D4 R19 D5 R20 D6 T18 D7 T19 D8 T20 D9 U18 D10 U19 D11 U20 D12 V19 D…

Text truncated - open the document above for the full version.

DONGGUAN EMTEK CO., LTD. REPORT NO.: KAD110630092F FCC ID: BOU-DS6800W DATE: 09/15/2011 Page 1 of 55 ELECTROMAGNETIC EMISSIONS COMPLIANCE REPORT INTENTIONAL RADIATOR CERTIFICATION TO FCC PART 15 SUBPART C REQUIREMENT OF Fidelio SoundSphere Wireless speakers with AirPlay MODEL No.: DS6800W/37 BRAND NAME: PHILIPS FCC ID: BOU-DS6800W/37 REPORT NO.: KAD110630092F ISSUE DATE: Sep. 15, 2011 Prepared for Philips Consumer Lifestyle 33029 East Governor John Sevier Hwy. Knoxville, Tennessee 37914 Prepared by DONGGUAN EMTEK CO., LTD No.281, Guantai Road, Nancheng District, Dongguan, Guangdong, China TEL: 86-769-22807078 FAX: 86-769-22807079 DONGGUAN EMTEK CO., LTD. REPORT NO.: KAD110630092F FCC ID: BOU-DS6800W DATE: 09/15/2011 Page 2 of 44 VERIFICATION OF COMPLIANCE Applicant: Philips Consumer Lifestyle 33029 East Governor John Sevier Hwy. Knoxville, Tennessee 37914 Manufacturer: PHILIPS ELECTRONICS HONG KONG LIMITED 5/F, Science Park East Avenue, HongKong Science Park, Shatin New Territories, HongKong Product Description: Fidelio SoundSphere Wireless speakers with AirPlay Brand Name: PHILIPS Model Number: DS6800W/37 Serial Number: N/A File Number: KAD110630092F Date of Test: Jun. 30, 2011 to Sep. 15, 2011 We hereby certify that: The above equipment was tested by DONGGUAN EMTEK CO., LTD. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4 (2009) and the energy emitted by the sample EUT tested as described in this report is in compliance with conducted and radiated emission limits of FCC Rules Part 15.247. also, the model complies with Canadian RSS-210 Issue 8 standard. The test results of this report relate only to the tested sample identified in this report. Approved By Sam.Lv / Q.A. Manager DONGGUAN EMTEK CO., LTD. DONGGUAN EMTEK CO., LTD. REPORT NO.: KAD110630092F FCC ID: BOU-DS6800W DATE: 09/15/2011 Page 3 of 44 Ta b l e o f C o n t e n t s 1. GENERAL INFORMATION ................................................................................................. 5 1.1 PRODUCT DESCRIPTION........................................................................................................................... 5 1.2 RELATED SUBMITTAL(S) / GRANT (S) ..................................................................................................... 6 1.3 TEST METHODOLOGY.............................................................................................................................. 6 1.4 SPECIAL ACCESSORIES............................................................................................................................ 6 1.5 EQUIPMENT MODIFICATIONS.................................................................................................................. 6 1.6 TEST FACILITY........................................................................................................................................ 6 2. SYSTEM TEST CONFIGURATION .................................................................................... 7 2.1 EUT CONFIGURATION............................................................................................................................. 7 2.2 EUT EXERCISE........................................................................................................................................ 7 2.3 TEST PROCEDURE.................................................................................................................................... 7 2.4 CONFIGURATION OF TESTED SYSTEM..................................................................................................... 7 3. DESCRIPTION OF TEST MODES ...................................................................................... 9 4. CONDUCTED EMISSIONS TEST ..................................................................................... 10 4.1 MEASUREMENT PROCEDURE:................................................................................................................ 10 4.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ....................................................................... 10 4.3 MEASUREMENT EQUIPMENT USED: ...................................................................................................... 10 4.4 CONDUCTED EMISSION LIMIT................................................................................................................ 11 4.5 MEASUREMENT RESULT:....................................................................................................................... 11 4.6 CONDUCTED MEASUREMENT PHOTOS: .................................................................................................. 14 5. RADIATED EMISSION TEST ............................................................................................ 15 5.1 MEASUREMENT PROCEDURE................................................................................................................. 15 5.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ....................................................................... 16 5.3 MEASUREMENT EQUIPMENT USED: ...................................................................................................... 17 5.4 RADIATED EMISSION LIMIT..................................................................................................................... 17 5.5 MEASUREMENT RESULT......................................................................................................................... 18 5.6 RADIATED MEASUREMENT PHOTOS: ..................................................................................................... 21 6. OCCUPIED BANDWIDTH TEST....................................................................................... 21 6.1 MEASUREMENT PROCEDURE................................................................................................................. 21 6.2 TEST SET-UP (…

Text truncated - open the document above for the full version.

Setup Photos