BOU-DS7880Docking Speaker

VOLUME User Manual To get the detailed instructions for use, visit www.philips.com/support. The speaker is mute when the battery level is low Deactivate bluetooth connection by sliding to the OFF position if you want to play under other audio sources. Short user manual DS7880 Always there to help you Question? Contact Philips www.philips.com/welcome 10V DC AUDIO IN Short User Manual EN Manual de usuario corto Bref mode d'emploi ES FR DS7880/37 www.philips.com/welcome Always there to help you Register your product and get support at Question? Contact Philips All registered and unregistered trademarks are property of their respective owners. © 2013 Koninklijke Philips Electronics N.V. All rights reserved. DS7880_37_Short UM_V1.1 BEEP DS7880 0000 PIN Register online at www.philips.com/welcome today to get the very most from your purchase. For Customer Use Enter below the Serial No.which is locat- ed on the rear of the cabinet. Retain this information for future reference. Model No.__________________________ Serial No.________________________ This “bolt of lightning” indicates unin- sulated material within your unit may cause an electrical shock.For the safety of everyone in your household, please do not remove product covering. The “exclamation point” calls atten- tion to features for which you should read the enclosed literature closely to pre- vent operating and maintenance problems. WARNING:To reduce the risk of fire or electric shock, this apparatus should not be exposed to rain or moisture and objects filled with liquids, such as vases, should not be placed on this apparatus. CAUTION:To prevent electric shock, match wide blade of plug to wide slot, fully insert. ATTENTION:Pour éviter les choc élec- triques, introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu’au fond. Congratulations on your purchase, and welcome to the “family!” Dear PHILIPS product owner: P. S. To get the most from your PHILIPS purchase, be sure to register online at: www.philips.com/welcome Register online at www.philips.com/welcome to ensure: PHILIPS LIMITED WARRANTY ONE (1) YEAR WARRANTY COVERAGE: PHILIPS warranty obligation is limited to the terms set forth below. WHO IS COVERED: Philips warrants the product to the original purchaser or the per- sonreceiving the product as a gift against defects in materials and workmanship as based on the date of original purchase (“Warranty Period”) from an Authorized Dealer. The original sales receipt showing the product name and the purchase date from an authorized retailer is considered such proof. WHAT IS COVERED: The Philips warranty covers new products if a defect in material or workmanship occurs and a valid claim is received by Philips within the Warranty Period. At its option, Philips will either (1) repair the product at no charge, using new or refurbished replacement parts, or (2) exchange the product with a product that is new or which has been manufactured from new, or ser- viceable used parts and is at least functionally equivalent or most comparable to the original product in Philips current inventory, or (3) refund the original purchase price of the product. Philips warrants replacement products or parts provided under this warranty against defects in materials and workmanship from the date of the replacement or repair for ninety (90) days or for the remaining portion of the original product’s warranty, whichever provides longer coverage for you. When a product or part is exchanged, any replacement item becomes your property and the replaced item becomes Philips’ property. When a refund is given, your product becomes Philips’ property. Note: Any product sold and identified as refurbished or renewed carries a ninety (90) day limited warranty. Replacement product can only be sent if all warranty requirements are met. Failure to follow all requirements can result in delay. WHAT IS NOT COVERED - EXCLUSIONS AND LIMITATIONS: This Limited Warranty applies only to the new products manu- factured by or for Philips that can be identified by the trademark, trade name, or logo affixed to it. This Limited Warranty does not apply to any non-Philips hardware product or any software, even if packaged or sold with the product. Non-Philips manufacturers, suppliers, or publishers may provide a separate warranty for their own products packaged with the bundled product. Philips is not liable for any damage to or loss of any programs, data, or other information stored on any media contained within the product, or any non-Philips product or part not covered by this warranty. Recovery or reinstallation of programs, data or other information is not covered under this Limited Warranty. This warranty does not apply (a) to damage caused by accident, abuse, misuse, neglect, misapplic ation, or non-Philips product, (b) to damage caused by service performed by anyone other than Philips or Philips Authorized Service Location, (c) to a product or a part that has been modified without the written permission of Philips, or (d) if any Philips serial number has been removed or defaced, or (e) product, accessories or consumables sold “AS IS” without warranty of any kind by including refurbished Philips product sold “AS IS” by some retailers. This Limited Warranty does not cover: • Shipping charges to return defective product to Philips. • Labor charges for installation or setup of the product, adjust- ment of customer controls on the product, and installation or repair of antenna/signal source systems outside of the product. • Product repair and/or part replacement because of improper installation or maintenance, connections to improper voltage supply, power line surge, lightning damage, retained images or screen markings resulting from viewing fixed stationary con- tent for extended periods, product cosmetic appearance items due to normal wear and tear, unauthorized repair or other cause not within the control of Philips. • Damage or claims for prod…

Text truncated - open the document above for the full version.

VOLUME User Manual To get the detailed instructions for use, visit www.philips.com/support. The speaker is mute when the battery level is low Deactivate bluetooth connection by sliding to the OFF position if you want to play under other audio sources. Short user manual DS7880 Always there to help you Question? Contact Philips www.philips.com/welcome 10V DC AUDIO IN Short User Manual EN Manual de usuario corto Bref mode d'emploi ES FR DS7880/37 www.philips.com/welcome Always there to help you Register your product and get support at Question? Contact Philips All registered and unregistered trademarks are property of their respective owners. © 2013 Koninklijke Philips Electronics N.V. All rights reserved. DS7880_37_Short UM_V1.1 BEEP DS7880 0000 PIN Battery powerLED indicator MediumFlashing slowly FullSteadily on  Française Puissance de la batterieVoyant Moyenne Clignotement lent Pleine S’allume en continu Le son du haut-parleur se coupe en cas de batterie faible. Veillez à désactiver la connexion Bluetooth en faisant glisser sur la position OFF. Pour obtenir les instructions d’utilisation détaillées, rendez-vous sur www.philips. com/support. Spécificités Amplificateur Puissance de sortie nominale2 x 5 W RMS Rapport signal/bruit75 dB MP3 Link0,6 V RMS 22 kOhm Bluetooth Version BluetoothV2.1+ EDR Fréquence de transmission Bande ISM 2.402-2.480 GHz Portée10 m (sans obstacle) Informations générales Alimentation CA (adaptateur secteur)GFP241DA-1024B-1 Entrée : 100-240 V~, 50/60 Hz, 0,55 A ; Sortie : 10 V 2,4 A ; Consommation électrique en mode de fonc- tionnement 10 W Dimensions - Unité principale (l x H x P) 310 x 105 x 41 mm Poids - Unité principale0,65 kg Mise au rebut de votre ancien produit Cet appareil a été conçu et fabriqué avec des matériaux et des composants de haute qualité pouvant être recyclés et réutilisés. Ne jetez pas ce produit avec les ordures ménagères ordinaires. Renseignez-vous sur les réglementations locales concernant la collecte des produits électriques et électroniques et des piles. La mise au rebut citoyenne de ces produits permet de protéger l’environnement et la santé. Visitez www.recycle.philips.com pour plus d’informations sur les centres de recyclage dans votre région. Confiez toujours votre produit à un professionnel pour retirer la batterie intégrée. Informations sur l’environnement Tout emballage superflu a été supprimé. Nous avons fait notre possible pour permettre une séparation facile de l’emballage en trois matériaux : carton (boîte), polystyrène moussé (qui amortit les chocs) et polyéthylène (sacs, feuille protectrice en mousse). Votre appareil se compose de matériaux recyclables et réutilisables à condition d’être démontés par une entreprise spécialisée. Respectez les réglementations locales pour vous débarrasser des emballages, des piles usagées et de votre ancien équipement. La réalisation de copies non autorisées de contenu protégé contre la copie, notamment de programmes informatiques, fichiers, diffusions et enregistrement sonores, peut représenter une violation de droits d’auteur et une infraction à la loi. Cet appareil ne doit en aucun cas être utilisé à de telles fins. « Made for iPod » (Compatible avec l’iPod) et « Made for iPhone » (Compatible avec l’iPhone) signifient qu’un appareil électronique est conçu spécialement pour être connecté à un iPod ou un iPhone et que le développeur certifie que le produit satisfait aux normes de performances Apple. Apple n’est pas responsable du fonctionnement de cet appareil ou de sa conformité aux normes de sécurité et aux normes réglementaires. Notez que l’utilisation de cet accessoire avec un iPod ou un iPhone peut affecter les performances sans fil. iPod et iPhone sont des marques commerciales d’Apple Inc. déposées aux États-Unis et dans d’autres pays. Remarque •La plaque signalétique est située sous l'appareil.  English Battery powerLED indicator MediumFlashing slowly FullSteadily on The speaker is mute when the battery level is low. Deactivate Bluetooth function by sliding to the OFF position if you want to play under other audio sources. To get the detailed instructions for use, visit www.philips.com/support. Specifications Amplifier Rated Output Power2X5 W RMS Signal to Noise Ratio75 dB MP3 Link0.6 V RMS 22 kohm Bluetooth Bluetooth specificationV2.1+EDR Frequency band2.402-2.480 GHzISM Band Range10 m (free space) General information AC powerGFP241DA-1024B-1 Input: 100–240V~ 50/60Hz 0.55A Output: 10V 2.4A Operation Power Consumption10 W Dimensions - Main Unit (W x H x D)310 x 105 x 41 mm Weight - Main Unit0.65 kg  Español Carga de la bateríaIndicador LED Medio Parpadeo lento Completa Encendido continuamente El altavoz se silencia cuando el nivel de la batería es bajo. Asegúrese de que ha desactivado la conexión Bluetooth deslizando a la posición OFF. Para obtener instrucciones detalladas para su uso, visite www.philips.com/support. Especificaciones Amplificador Potencia de salida2 x 5 W RMS Relación señal/ruido75 dB Conexión MP30,6 V RMS 22 kohmios Bluetooth Versión de BluetoothV2.1+ EDR Banda de frecuencia Banda ISM de 2,402 - 2,480 GHz Alcance10 m (espacio libre) Información general Alimentación de CA (adaptador de corriente)GFP241DA-1024B-1 Entrada: 100-240 V~, 50/60 Hz; 0,55 A; Salida: 10 V 2,4 A; Consumo de energía en funcionamiento10 W Dimensiones - Unidad principal (ancho x alto x profundo) 310 x 105 x 41 mm Peso - Unidad principal0,65 kg

_160, Issue 02 Declaration of Authorization We Name: Philips Consumer Lifestyle Address: 5/F, Philips Electronics Building, 5 Science Park East Avenue, Hong Kong Science Park, City: Shatin, New Territories, Country: Hong Kong Declare that: Name Representative of agent: Ms. Cathy Wang Agent Company name: Neutron Engineering, Inc. Address: No.3 Jinshagang 1 st Road, Shixia, Dalang Town City: Dongguan Country: China is authorized to apply for Certification of the following product(s): Product description: Docking Speaker FCC Model: DS7880/37; DS7880/17; DS7880/07 IC Model: DS7880/37 Trademark: PHILIPS on our behalf. Date: 2013-03-25 City: Hong Kong Name: Benson Lai Function: Lead Engineer, BG LE, Safety & Compliances Signature: .

FCC, Request for non-disclosure Date: 10-AUG-09 RF_501, Issue 5 Page 1 of 1 Company Name: Philips Consumer Lifestyle Address: 5/F, Philips Electronics Building 5 Science Park East Avenue, Hong Kong Science Park City: Shatin, New Territories Country: Hong Kong To: Telefication B.V., Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Request for confidentiality FCC ID: BOU-DS7880 Reference number: Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, a pplicant hereby requests Short-Term Confidential treatment of the following materials (note 1): Internal Photos User’s Manual Test Set-up Photos External Photos Justification: Planned Release Date STC: (notes 2, 3, 4, 5) Date: 2013-03-25 Name and signature of applicant: Benson Lai Notes: 1) A document or type of document can only have ONE type of confidentiality! 2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)! 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this! 5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period

Model Declaration Letter We, the undersigning company Company Name: Philips Consumer Lifestyle Address: 5/F, Philips Electronics Building, 5 Science Park East Avenue, Hong Kong Science Park, Shatin, New Territories, City: Hong Kong Country: China Hereby confirm that the following products: Product description: Docking Speaker Type designation: DS7880/37; DS7880/17 ;DS7880/07 Brand: PHILIPS That All versions of the Model DS7880/17; DS7880/07 and DS7880/37 are electrically equal and only difference is model name Date: 2013-03-25 City: Hong Kong Name: Benson Lai Function: Lead Engineer, BG LE, Safety & Compliances Signature: .

Neutron Engineering Inc. Project No.: 1212C060A Page 2 of 19 Neutron Engineering Inc. Project No.: 1212C060A Page 3 of 19 Neutron Engineering Inc. Project No.: 1212C060A Page 4 of 19 Neutron Engineering Inc. Project No.: 1212C060A Page 5 of 19

2 3 1 D41013704 Part Name:label(主机贴纸) Size：90×14mm Material:label Color:黑底白字 此内容由IQC打印！ 1X1PC 41012747 Part Name:加拿大NRCan 贴纸 Size： 38X15MM Material:label Color:白底黑字 1X1PC 位置:贴于主机底部 FCC标准贴纸 白底黑字 47X15mm

Neutron Engineering Inc. Project No.: 1212C060A Page 6 of 19 Neutron Engineering Inc. Project No.: 1212C060A Page 7 of 19 Neutron Engineering Inc. Project No.: 1212C060A Page 8 of 19 Neutron Engineering Inc. Project No.: 1212C060A Page 9 of 19 Neutron Engineering Inc. Project No.: 1212C060A Page 10 of 19 Neutron Engineering Inc. Project No.: 1212C060A Page 11 of 19 Neutron Engineering Inc. Project No.: 1212C060A Page 12 of 19 Neutron Engineering Inc. Project No.: 1212C060A Page 13 of 19 Neutron Engineering Inc. Project No.: 1212C060A Page 14 of 19 Neutron Engineering Inc. Project No.: 1212C060A Page 15 of 19 Neutron Engineering Inc. Project No.: 1212C060A Page 16 of 19 Neutron Engineering Inc. Project No.: 1212C060A Page 17 of 19 Neutron Engineering Inc. Project No.: 1212C060A Page 18 of 19 Neutron Engineering Inc. Project No.: 1212C060A Page 19 of 19

Neutron Engineering Inc. FCC RF EXPOSURE REPORT FCC ID:BOU-DS7880 Project No. : 1212C060A Equipment : Docking Speaker Model : DS7880/37;DS7880/17;DS7880/07 Applicant : Philips Consumer Lifestyle Address : 5/F, Philips Electronics Buildin g, 5 Science Park East Avenue, Hon g Kong Science Park, Shatin, New Territories, Hong Kong According: : FCC Guidelines for Human Exposure IEEE C95.1 Neutron Engineering Inc. No.3, Jinshagang 1st Road, ShiXia, Dalang Town, Dong Guan, China. TEL : (0769) 8318-3000 FAX : (0769) 8319-6000 Neutron Engineering Inc. MPE CALCULATION METHOD: Calculation Method of RF Safety Distance: where: S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna TEST RESULTS EUT： Docking Speaker Model Name ： DS7880/37 Temperature： 25 °C Relative Humidity： 58 % Pressure： 1009 hPa Test Voltage ： AC 120V/60Hz Test Mode ： CH00/ CH39 /CH78 -1Mbps Antenna Gain (dBi) Antenna Gain (numeric) Peak Output Power (dBm) Peak Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Te s t Result 0 1.0000 3.50 2.2387 0.000445611 Complies 0 1.0000 2.78 1.8967 0.000377531 Complies 0 1.0000 2.03 1.5959 0.000317651 Complies EUT： Docking Speaker Model Name ： DS7880/37 Temperature： 25 °C Relative Humidity： 58 % Pressure： 1009 hPa Test Voltage ： AC 120V/60Hz Test Mode ： CH00/ CH39 /CH78 -3Mbps Antenna Gain (dBi) Antenna Gain (numeric) Peak Output Power (dBm) Peak Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Te s t Result 0 1.0000 3.89 2.4491 0.000487471 Complies 0 1.0000 2.77 1.8923 0.000376661 Complies 0 1.0000 2.09 1.6181 0.000322071 Complies

Neutron Engineering Inc. Report No.: NEI-FICP-1-1212C060A Page 1 of 96 FCC/IC Radio Test Report FCC ID: BOU-DS7880 IC: 135M-DS7880 This report concerns (check one) : Original Grant Class II Change Issued Date : Mar. 21, 2013 Project No. : 1212C060A Equipment : Docking Speaker Model Name for FCC : DS7880/37;DS7880/17;DS7880/07 Model Name for IC : DS7880/37 Applicant : Philips Consumer Lifestyle Address : 5/F, Philips Electronics Building, 5 Science Park East Avenue, Hong Kong Science Park, Shatin, New Territories, Hong Kong Manufacturer : Philips Consumer Lifestyle Address : 5/F, Philips Electronics Building, 5 Science Park East Avenue, Hong Kong Science Park, Shatin, New Territories, Hong Kong Tested by: Neutron Engineering Inc. EMC Laboratory Date of Receipt: Mar. 06, 2013 Date of Test: Mar. 06, 2013 ~ Mar. 20, 2013 Testing Engineer : (David Mao) Technical Manager : (Leo Hung) Authorized Signatory : (Steven Lu) Neutron Engineering Inc. No.3,Jinshagang 1st Road, ShiXia, Dalang Town, Dong Guan, China. TEL : (0769) 8318-3000 FAX : (0769) 8319-6000 Neutron Engineering Inc. Report No.: NEI-FICP-1-1212C060A Page 2 of 96 Declaration Neutron represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement Laboratory (NML) of CHINA, or National Institute of Standards and Technology (NIST) of U.S.A. Neutron's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. Neutron shall have no liability for any declarations, inferences o r generalizations drawn by the client or others from Neutron issued reports. Neutron’s reports must not be used by the client to claim product endorsement by the authorities or any agency of the Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and Neutron-self, extracts from the test report shall not be reproduced except in full with Neutron’s authorized written approval. Neutron’s laboratory quality assurance procedures are in compliance with the ISO Guide 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Neutron Engineering Inc. Report No.: NEI-FICP-1-1212C060A Page 3 of 96 Table of Contents Page 1 . CERTIFICATION 5 2 . SUMMARY OF TEST RESULTS 6 2.1 TEST FACILITY 7 2.2 MEASUREMENT UNCERTAINTY 7 3 . GENERAL INFORMATION 8 3.1 GENERAL DESCRIPTION OF EUT 8 3.2 DESCRIPTION OF TEST MODES 10 3.3 TABLE OF PARAMETERS OF TEXT SOFTWARE SETTING 10 3.4 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 11 3.5 DESCRIPTION OF SUPPORT UNITS 12 4 . EMC EMISSION TEST 13 4.1 CONDUCTED EMISSION MEASUREMENT 13 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS 13 4.1.2 MEASUREMENT INSTRUMENTS LIST AND SETTING 13 4.1.3 TEST PROCEDURE 14 4.1.4 DEVIATION FROM TEST STANDARD 14 4.1.5 TEST SETUP 14 4.1.6 EUT OPERATING CONDITIONS 14 4.1.7 TEST RESULTS 15 4.2 RADIATED EMISSION MEASUREMENT 18 4.2.1 RADIATED EMISSION LIMITS 18 4.2.2 MEASUREMENT INSTRUMENTS LIST ANS SETTING 19 4.2.3 TEST PROCEDURE 20 4.2.4 DEVIATION FROM TEST STANDARD 20 4.2.5 TEST SETUP 21 4.2.6 EUT OPERATING CONDITIONS 22 4.2.7 TEST RESULTS (BETWEEN30 – 1000 MHZ) 23 4.2.8 TEST RESULTS (ABOVE 1000 MHZ) 26 5 . NUMBER OF HOPPING CHANNEL 50 5.1 APPLIED PROCEDURES / LIMIT 50 5.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 50 5.1.2 TEST PROCEDURE 50 5.1.3 DEVIATION FROM STANDARD 50 5.1.4 TEST SETUP 50 5.1.5 EUT OPERATION CONDITIONS 50 5.1.6 TEST RESULTS 51 6 . AVERAGE TIME OF OCCUPANCY 53 Neutron Engineering Inc. Report No.: NEI-FICP-1-1212C060A Page 4 of 96 Table of Contents Page 6.1 APPLIED PROCEDURES / LIMIT 53 6.1.1 MEASUREMENT INSTRUMENTS LIST 53 6.1.2 TEST PROCEDURE 53 6.1.3 DEVIATION FROM STANDARD 53 6.1.4 TEST SETUP 54 6.1.5 EUT OPERATION CONDITIONS 54 6.1.6 TEST RESULTS 55 7 . HOPPING CHANNEL SEPARATION MEASUREMENT 67 7.1 APPLIED PROCEDURES / LIMIT 67 7.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 67 7.1.2 TEST PROCEDURE 67 7.1.3 DEVIATION FROM STANDARD 67 7.1.4 TEST SETUP 67 7.1.5 EUT OPERATION CONDITIONS 67 7.1.6 TEST RESULTS 68 8 . BANDWIDTH TEST 72 8.1 APPLIED PROCEDURES / LIMIT 72 8.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 72 8.1.2 TEST PROCEDURE 72 8.1.3 DEVIATION FROM STANDARD 72 8.1.4 TEST SETUP 72 8.1.5 EUT OPERATION CONDITIONS 72 8.1.6 TEST RESULTS 73 9 . PEAK OUTPUT POWER TEST 77 9.1 APPLIED PROCEDURES / LIMIT 77 9.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 77 9.1.2 TEST PROCEDURE 77 9.1.3 DEVIATION FROM STANDARD 77 9.1.4 TEST SETUP 77 9.1.5 EUT OPERATION CONDITIONS 77 9.1.6 TEST RESULTS 78 10 . ANTENNA CONDUCTED SPURIOUS EMISSION 82 10.1 APPLIED PROCEDURES / LIMIT 82 10.1.1 MEASUREMENT INSTRUMENTS LIST AND SETTING 82 10.1.2 TEST PROCEDURE 82 10.1.3 DEVIATION FROM STANDARD 82 10.1.4 TEST SETUP 82 10.1.5 EUT OPERATION CONDITIONS 82 10.1.6 TEST RESULTS 83 11 . EUT TEST PHOTO 95 Neutron Engineering Inc. Report No.: NEI-FICP-1-1212C060A Page 5 of 96 1. CERTIFICATION Equipment : Docking Speaker Brand Name : PHILIPS Model Name for FCC : DS7880/37;DS7880/17;DS7880/07 Model Name for IC : DS7880/37 Applicant : Philips Consumer Lifestyle Factory : Zhong Shan City LI TAI Electronic industrial Co.,Ltd Address : No.3 Industrial district, Wu guishan, Cheng gui Road, Zhongshan city GuangDong, China Date of Test : Mar. 06, 2013 ~ Mar. 20, 2013 Test Item : ENGINEERING SAMPLE Standards : FCC Part15, Subpart C(15.247) / ANSI C63.4 : 2009 FCC Public Notice DA 00-705, March 30, 2000. Canada RSS-210:2010 The above equipment has been tested and found compliance with the requirement of the relative…

Text truncated - open the document above for the full version.

Neutron Engineering Inc. Report No.: NEI-FICP-1-1212C060A Page 95 of 96 11. EUT TEST PHOTO Conducted Measurement Photos Neutron Engineering Inc. Report No.: NEI-FICP-1-1212C060A Page 96 of 96 Radiated Measurement Photos