BOU-WAC700BWireless Music Center

WACS700 THANK YOU FOR CHOOSING PHILIPS! NEED HELP FAST? Read your Quick-Use guide and/or owner's manual first for quick tips that make using your Philips product more enjoyable. If you have read your instructions and still need assistance, you may access our online help at www.usasupport.philips.com or call 1-888-PHILIPS(744-5477) while with your product, (and model/serial number). User manual Manuel d'utilisation Manual del usuario Wireless Music Center + Station p001-p051_WACS700_EngNEW29/16/2005, 09:061 2 Return your Product Registration Card today to get the very most from your purchase. Registering your model with PHILIPS makes you eligible for all of the valuable benefits listed below, so don't miss out. Complete and return your Product Registration Card at once to ensure: *Proof of Purchase Returning the enclosed card guarantees that your date of purchase will be on file, so no additional paperwork will be required from you to obtain war- ranty service. *Product Safety Notification By registering your product, you'll receive notification - directly from the manufacturer - in the rare case of a product recall or safety defect. *Additional Benefits of Product Ownership Registering your product guaran- tees that you'll receive all of the privileges to which you're enti- tled, including special money-sav- ing offers. Know these safetysymbols This “bolt of lightning” indicates uninsulated material within your unit may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering. The “exclamation point” calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems. CAUTION:To prevent electric shock, match wide blade of plug to wide slot, fully insert. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. t s For Customer Use Enter below the Serial No. which is located on the rear of the cabinet. Retain this information for future ref- erence. Model No. ______________________ Serial No. ______________________ WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. p001-p051_WACS700_EngNEW29/16/2005, 09:062 3 1 2 3 4 8765 ^%$#@!09 SAME ARTIST SAME GENRE SMART EQUALIZER p001-p051_WACS700_EngNEW29/16/2005, 09:063 4 134 567890! 2 SAME ARTIST SAME GENRE SMART EQUALIZER p001-p051_WACS700_EngNEW29/16/2005, 09:064 5 Visit our World Wide Web Site at http://www.usasupport.philips.com Congratulations on your purchase, and welcome to the “family!” Dear PHILIPS product owner: Thank you for your confidence in PHILIPS. You’ve selected one of the best-built, best-backed products available today. We’ll do every- thing in our power to keep you happy with your purchase for many years to come. As a member of the PHILIPS “family,” you’re entitled to protection by one of the most comprehensive warranties and outstanding serv- ice networks in the industry. What’s more, your purchase guaran- tees you’ll receive all the information and special offers for which you qualify, plus easy access to accessories from our convenient home shopping network. Most importantly, you can count on our uncompromising commit- ment to your total satisfaction. All of this is our way of saying welcome - and thanks for investing in a PHILIPS product. P.S. To get the most from your PHILIPS purchase, be sure to complete and return your Product Registration Card at once. p001-p051_WACS700_EngNEW29/16/2005, 09:065 6 IMPORTANT SAFETY INSTRUCTIONS Class II equipment symbol This symbol indicates that the unit has a double insulation system Clean only with a piece of dry cloth. materials p001-p051_WACS700_EngNEW29/16/2005, 09:066 7 The set complies with the FCC-Rules, Part 15 and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: 1. this device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Par t 15 of the FCC Rules. Philips WACS700 These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and the receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/ TV technician for help. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set for th for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Canada English: This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications. Français: Cet appareil numérique n'emet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de Class B prescrites dans le Règle…

Text truncated - open the document above for the full version.

SRD-Testreport CETECOM ICT Services GmbH Saarbruecken, Germany Test report No.: 4-1748-02-04/05 Date: 2005-10-04 Page 64 of 71 4 Photographs WAC Test site: SRD-Testreport CETECOM ICT Services GmbH Saarbruecken, Germany Test report No.: 4-1748-02-04/05 Date: 2005-10-04 Page 65 of 71

SRD-Testreport CETECOM ICT Services GmbH Saarbruecken, Germany Test report No.: 4-1748-02-04/05 Date: 2005-10-04 Page 65 of 71

SRD-Testreport CETECOM ICT Services GmbH Saarbruecken, Germany Test report No.: 4-1748-02-04/05 Date: 2005-10-04 Page 67 of 71 Test sample: SRD-Testreport CETECOM ICT Services GmbH Saarbruecken, Germany Test report No.: 4-1748-02-04/05 Date: 2005-10-04 Page 68 of 71 SRD-Testreport CETECOM ICT Services GmbH Saarbruecken, Germany Test report No.: 4-1748-02-04/05 Date: 2005-10-04 Page 69 of 71 SRD-Testreport CETECOM ICT Services GmbH Saarbruecken, Germany Test report No.: 4-1748-02-04/05 Date: 2005-10-04 Page 70 of 71 SRD-Testreport CETECOM ICT Services GmbH Saarbruecken, Germany Test report No.: 4-1748-02-04/05 Date: 2005-10-04 Page 71 of 71

SRD-Testreport CETECOM ICT Services GmbH Saarbruecken, Germany Test report No.: 4-1748-02-04/05 Date: 2005-10-04 Page 1 of 71 \\Ut55\4_PROJEKTE\05\1748_2\Task4(SRD)\4-1748-02-04_05.doc Recognized by the Federal Communications Commission Anechoic chamber registration no.: 90462 (FCC) Anechoic chamber registration no.: 3463 (IC) TCB ID: DE 0001 Accredited by the German Accreditation Council DAR–Registration Number DAT–P–176/94-D1 Independent ETSI compliance test house ETSI Accredited Bluetooth ® Test Facility (BQTF) Test report no.: 4-1748-02-04/05 WAC700 FCC Part 15.247 / CANADA RSS-210 FCC ID: BOU-WAC700B IC: 135M-WAC700B SRD-Testreport CETECOM ICT Services GmbH Saarbruecken, Germany Test report No.: 4-1748-02-04/05 Date: 2005-10-04 Page 2 of 71 Table of contents 1. ADMINISTRATIVE DATA ...................................................................................................................................... 3 1.1. ADMINISTRATIVE DATA OF THE TEST FACILITY..................................................................................................... 3 1.1.1 Identification of the testing laboratory ......................................................................................................... 3 1.1.2 Organizational items..................................................................................................................................... 3 1.1.3 Applicant ́s details ........................................................................................................................................ 4 1.2 ADMINISTRATIVE DATA OF MANUFACTURER / MEMBER........................................................................................ 4 1.3 DESCRIPTION OF THE EQUIPMENT UNDER TEST (EUT) .......................................................................................... 5 1.3.1 EUT: Type, S/N etc. ...................................................................................................................................... 5 1.3.2 If RF component testing only, describtion of additional used HW/SW ......................................................... 5 1.3.3 Additional EUT information ......................................................................................................................... 5 2 TESTSTANDARD & SUMMARY LIST OF ALL PERFORMED TEST CASES .............................................. 7 3 RF MEASUREMENT TESTING ............................................................................................................................. 8 3.1 DESCRIPTION OF TEST SET-UP................................................................................................................................8 3.1.1 Radiated measurements ................................................................................................................................ 8 3.1.2 Conducted measurements ............................................................................................................................. 8 3.2 PEAK POWER SPECTRAL DENSITY (DIGITALLY MODULATED SYSTEMS) §15.247(D) .............................................. 8 3.3 SPECTRUM BANDWIDTH OF A DSSS SYSTEM / 6 DB BANDWITH §15.247(A2) ...................................................... 8 3.4 MAXIMUM OUTPUT POWER (CONDUCTED) §15.247 (B) (1) .................................................................................... 8 3.5 MAX. PEAK OUTPUT POWER (RADIATED) §15.247 (B) (1) ...................................................................................... 8 3.6 BAND-EDGE COMPLIANCE OF CONDUCTED EMISSIONS §15.247 (C) ........................................................................... 8 3.7 BAND-EDGE COMPLIANCE OF RADIATED EMISSIONS §15.205 ................................................................................ 8 3.8 SPURIOUS EMISSIONS - CONDUCTED (TRANSMITTER) §15.247 (C) ........................................................................ 8 3.9 SPURIOUS EMISSIONS - RADIATED (TRANSMITTER) §15.209 ................................................................................. 8 3.10 SPURIOUS EMISSIONS - RADIATED (RECEIVER) §15.109 / 209 ............................................................................... 8 3.11 SPURIOUS EMISSIONS - RADIATED <30 MHZ §15.109 ........................................................................................... 8 3.12 CONDUCTED EMISSIONS <30 MHZ §15.107/207 ................................................................................................... 8 4 PHOTOGRAPHS ....................................................................................................................................................... 8 ANNEX 1: TECHNICAL PRODUCT DESCRIPTION SRD-Testreport CETECOM ICT Services GmbH Saarbruecken, Germany Test report No.: 4-1748-02-04/05 Date: 2005-10-04 Page 3 of 71 1. Administrative data 1.1. Administrative data of the test facility 1.1.1 Identification of the testing laboratory Company name: Cetecom ICT Services GmbH Address: Untertürkheimerstr. 6-10 D-66117 Saarbruecken Germany Laboratory accreditation: DAR-Registration No. DAT-P-176/94-D1 Bluetooth Qualification Test Facility (BQTF) Responsible for testing laboratory: Harro Ames, Michael Berg Phone: +49 681 598 0 Fax: +49 681 598 9075 email: [email protected] ..................................................... / .......................................................... Responsible for testing laboratory (Harro Ames, Michael Berg) 1.1.2 Organizational items Reference No.: 4-1748-02-04/05 Order No.: Responsible for test report and Harro Ames, Michael Berg project leader: Receipt of EUT: 2005-09-12 Date(s) of test: 2005-09-12 to 2005-09-15 Date of report: 2005-10-04 Number of report pages: 71 Number of diagram pages (annex): --------------------------------------------------------------------------------------------------------------------------------------- Version of template:1.2 .....................…

Text truncated - open the document above for the full version.

SRD-Testreport CETECOM ICT Services GmbH Saarbruecken, Germany Test report No.: 4-1748-02-04/05 Date: 2005-10-04 Page 64 of 71 4 Photographs WAC Test site: SRD-Testreport CETECOM ICT Services GmbH Saarbruecken, Germany Test report No.: 4-1748-02-04/05 Date: 2005-10-04 Page 65 of 71 SRD-Testreport CETECOM ICT Services GmbH Saarbruecken, Germany Test report No.: 4-1748-02-04/05 Date: 2005-10-04 Page 66 of 71 AC-conducted: