BOUPHDS3600Docking System For iPod/iPhone

www.philips.com/welcome User manual Register your product and get support at 1EN Contents 1 Important 2 Safety 2 2 Your Docking Speaker 4 Introduction 4 What's in the box 4 Overview of the main unit 5 Overview of the remote control 6 3 Get started 7 Prepare the remote control 7 Connect power 7 Turn on 7 4 Play 8 Play from iPod/iPhone/iPad 8 Play from Bluetooth device 11 Play from an external audio device 12 Adjust volume 12 Mute sound 12 5 Specifications 13 Amplifier 13 Bluetooth 13 General information 13 6 Troubleshooting 14 About Bluetooth device 14 7 Notice 15 RSS 15 Disposal of your old product and batteries 15 2EN 1 Important Safety This 'bolt of lightning' indicates uninsulated material within your unit may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering. The 'exclamation point' calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems. WARNING: To reduce the risk of fire or electric shock, this apparatus should not be exposed to r ain or moisture and objects filled with liquids, such as vases, should not be placed on this apparatus. CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert. Important Safety Instructions a Read these instructions. b Keep these instructions. c Heed all warnings. d Follow all instructions. e Do not use this apparatus near water. f Clean only with dry cloth. g Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. h Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. i Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. j Only use attachments/accessories specified by the manufactur er. k Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. l Unplug this apparatus during lightning storms or when unused for long periods of time. m Refer all servicing to qualified service personnel. Servicing is r equired when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. n Apparatus shall not be exposed to dripping or splashing. o Do not place any sources of danger on the apparatus (e.g. liquid filled objects, lighted candles). p This product may contain lead and mercury. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling 3EN information, please contact your local authorities or the Electronic Industries Alliance: www.eiae.org. q Where the plug of the Direct Plug-in Adapter is used as the disconnect device, the disconnect device shall remain readily operable. Warning • Keep the battery away from heat, sunshine or fire. Never discard battery in fire. •Replace the battery with the same or equivalent type only. •The battery contains chemical substances, so it should be disposed of properly. •The button cell battery cannot be swallowed. Keep children away from the battery. •The USB socket is for data transmission only. •Never remove the casing of this apparatus. •Make sure that you always have easy access to the power cord, plug or adaptor to disconnect the apparatus from the power. 4EN 2 Your Docking Speaker Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the bottom of the apparatus. Write the numbers here: Model No. __________________________ Serial No. ___________________________ Introduction With this docking speaker, you can • enjoy audio from the iPod/iPhone/iPad, Bluetooth devices and other external audio devices; and • synchronize the iPod/iPhone/iPad with your computer through USB socket. What's in the box Check and identify the contents of your package: • Main unit • Remote control (with battery) • 1 x AC power adaptor • Quick start guide • 5EN Overview of the main unit a Dock for the iPod/iPhone/iPad b / • Adjust volume. • As LED indicators, show system status. c • Select Bluetooth mode. • Turn the docking speaker on or off. d Power supply socket • Connect AC power. e • Connect a computer with a USB cable. c a b d e f f MP3-LINK • Connect an external audio device. 6EN Overview of the remote control a • Select iPod/iPhone/iPad dock mode. b / • Skip to a track. • Search within play. c • Mute volume. d • Start or pause play. e / • Adjust volume. f • Select MP3 link mode. a b f e d c 7EN 3 Get started Always follow the instructions in this chapter in sequence. Prepare the remote control For first-time use: Remove the protectiv e tab to activate the remote control battery. To replace the empty battery: 1 Open the battery tray. 2 Insert one CR2025 battery with correct polarity (+/-) as indicated. 3 Close the battery tray. Connect power Caution • Risk of product damage! Make sure that the power supply voltage matches the voltage printed on the bottom of the unit. •Risk of electric shock! When you unplug the AC adaptor, always pull the plug from the socket. Never pull the cord. •Before connecting the AC adaptor, ensure you have completed all other connections. Note • The type plate is located at the back of the main unit. Connect the AC power adaptor to: • the power supply socket on the back of the docking speaker. • the wall outlet. CR2025 Turn on Press and hold on the main unit for 2 seconds. »The / LE…

Text truncated - open the document above for the full version.

Philips Consumer Lifestyle Request for Confidentiality Date: __2011-12-23 ______ Subject: Confidentiality Request for: ______ FCC ID：BOUPHDS3600____ Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term External Photos Short Term Permanent* 1 Internal Photos Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Parts List & Placement/BOM Short Term Permanent Tune-Up Procedure Short Term Permanent Schematics Short Term Test Setup Photos Short Term Permanent* User’s Manual *Note: ______(Insert Explanation as Necessary)______ ______Philips Consumer Lifestyle________ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of ___(specify number of days not to exceed 180 ) 2 ___ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications: The applicant understands that until such time that IC distinguishes between Short Term and Permanent Confidentiality, either type of marked exhibit above will simply be marked Confidential when submitted to IC. Sincerely, By: _________ Lead Engineer __________ Benson Lai__________ (Signature/Title 3 ) (Print name) 1 - The asterisked items (*) require further justification before permanent confidentiality will be allowed. These also currently require review by the FCC under their Permit-But-Ask policy before the grant is issued and can delay completion of an application. Further justification should be added to the note above. One such example for a potted device would be: “The EUT is FULLY potted using a non-removable epoxy based material. Removal of potting material causes irreparable damage to internal circuitry. See photographs exhibits that outline the device before and after potting.” 2 - Please refer to http://acbcert.com/documents/misc-docs/Memo-Short-Term-Vs-Standard-Confidentiality.pdf for complete details. 3 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

Model No.: DS3600/37 Serial No.: AQ1A1150000001 Model No.: DS3600/37 DC 12V 2.5A Manufactured: January / 2012 FCC ID:BOUPHDS3600 IC:135M-PHDS3600 JOBDS3600/37 RATING LABEL SIZE: 54W x 29Hmm Made in China Philips Consumer Lifestyle P.O. Box 10313 Stamford, CT 06904 JOB:DS3600/37 Model &Serial label SIZE50W X 13Hmm 8670 000 86153 MADE IN CHINA FABRIQUE EN CHINE MADE IN CHINA FABRIQUE EN CHINE PHILIPS CONSUMER LIFESTYLE, A DIVISION OF PHILIPS ELECTRONICS NORTH AMERICA CORPORATION P.O. Box 10313 Stamford, CT 06904 CARTON PRINTED IN CHINA JOB:DS3600/37 FCC LABEL SIZE: 56(W) x22(H)mm JOB:DS3600/37 ICES LABEL SIZE: 49(W) x14.5(H)mm AQ1A1201000001 JOB: DS3600/37 MODEL & SERIAL LABEL SIZE: 60(W) x10H)mm DS3600/37 MODEL NO.SERIAL NO. JOBDS3600/37 CARTON LABEL SIZE: 90W x 110Hmm Docking Speaker 2X Model No.: DS3600/37 8670 000 86153 10609585222622 JOB: DS3600/37 D-BOX LABEL SIZE:76(W) x 65(H) mm DS3600/37 Model No.:DS3600/37 Serial No.: AQ1A1145000001 4.4 2.0 Docking Speaker 1X 65 0 9 5 8 5 2 2 2 6 2

1 Photographs - EUT Constructional Details(Test Model No.: DS3600/37)

SGS-CSTC Standards Technical Services Co., Ltd. No. 1 Workshop, M-10, Middle section, Science & Technology Park, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 Email: [email protected] Report No.: SZEM111200543203 Page: 1 of 3 Authorized Signature: Jack Zhang EMC Laboratory Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 1 RF Exposure Evaluation declaration Application No.: SZEM1112005432RF Applicant: Philips Consumer Lifestyle Address of Applicant: 1600 Summer Street Stamford Connecticut 06905 United States Manufacturer: PHILIPS Electronics Hong Kong Ltd Address of Manufacturer: 5/F., 5 Science Park East Avenue, Hong Kong Science Park, Shatin, N.T., Hong Kong Factory Yusan Technology (Shenzhen) Limited Address of Factory: Haoyi Technology Park, Nan Huan Road, Shajing West, Baoan Shenzhen, Guang Dong P.R. China FCC ID: BOUPHDS3600 Fundamental Carrier Frequency : 2.402GHz-2.480GHz Equipment Under Test (EUT): EUT Name: Docking System For iPod/iPhone Model No.: DS3600/37 Trade mark: PHILIPS Date of Receipt: 2011-12-22 Date of Test: 2011-12-23 to 2012-01-13 Date of Issue: 2012-01-29 Test Result : PASS* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: SZEM111200543203 Page: 2 of 3 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 2 RF Exposure Evaluation 2.1 Limits According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in1.1307(b) LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm2) Average Time (Minutes) (A) Limits for Occupational/ Control Exposures 300-1500 -- -- F/300 6 1500-100,000 -- -- 5 6 300-1500 -- -- F/1500 6 1500-100,000 -- -- 1 300 F= Frequency in MHz Friis Formula Friis transmission formula: Pd = (Pout*G)/(4* Pi * R 2 ) Where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: SZEM111200543203 Page: 3 of 3 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Docum…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Ltd. No. 1 Workshop, M-10, Middle section, Science & Technology Park, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 Email: [email protected] Report No.: SZEM111200543201 Page: 1 of 69 Authorized Signature: Jack Zhang EMC Laboratory Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 1 Cover Page FCC REPORT Application No: SZEM1112005432RF Applicant: Philips Consumer Lifestyle Product Name: Docking System For iPod/iPhone Operation Frequency: 2.402GHz to 2.480GHz FCC ID: BOUPHDS3600 Standards: FCC CFR Title 47 Part 15 Subpart C Section 15.247: 2010 Date of Receipt: 2011-12-22 Date of Test: 2011-12-23 to 2012-01-13 Date of Issue: 2012-01-18 Test Result : PASS * * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Ltd. Report No.: SZEM111200543201 Page: 2 of 69 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 2 Contents Page 1 COVER PAGE.........................................................................................................................................................1 2 CONTENTS.............................................................................................................................................................. 2 3 TEST SUMMARY.................................................................................................................................................... 3 4 GENERAL INFORMATION................................................................................................................................... 4 4.1 CLIENT INFORMATION.......................................................................................................................................... 4 4.2 GENERAL DESCRIPTION OF E.U.T. ....................................................................................................................... 4 4.3 E.U.T OPERATION MODE...................................................................................................................................... 6 4.4 DESCRIPTION OF SUPPORT UNITS......................................................................................................................... 6 4.5 TEST FACILITY..................................................................................................................................................... 6 4.6 TEST LOCATION................................................................................................................................................... 6 4.7 OTHER INFORMATION REQUESTED BY THE CUSTOMER........................................................................................ 6 4.8 TEST INSTRUMENTS LIST…

Text truncated - open the document above for the full version.

1 Photographs - Test Setup Photo (Test Model No.: DS3600/37) Radiated Emission Test Setup Conducted Emission Test Setup