BOUSHB6000Bluetooth Stereo Headset

Register your product and get support at www.philips.com/welcome SHB6000/28 EN User manual Bluetooth stereo headset 1 Contents 1 Important 2 Hearing Safety 2 Electric-, Magnetic- and Electromagnetic Fields (EMF) 2 General information 2 Disposal of your old product 2 Battery disposal 2 Remove the integrated battery 2 Notice for USA (FCC) 3 Notice for Canada 3 Trademarks 3 2 Your bluetooth stereo headset 4 Introduction 4 What’s in the box 4 Compatibility 4 Overview of your Bluetooth stereo headset 5 3 Get started 6 Charge the headset 6 Pair the headset with your mobile phone 6 4 Use the headset 7 Connect the headset to your mobile phone 7 Automatic power saving 7 Get the best fit 7 Operate the headset 7 Manage 3-way calls 7 LED and sound indication 7 Clean the headset 7 5 Technical data 8 6 Frequently asked questions 9 English EN 2 About operating and storage temperatures Do not operate or store in a place where temperature is • below -15ºC (5ºF) or above 55ºC (131ºF) as this may shorten your battery life. The integrated battery shall not be exposed to excessive heat • such as sunshine, fire or the like. Ensure that there is no foreign objects inside the USB cover • and close the cover tightly. Disposal of your old product Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health. Battery disposal Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed of with normal household waste. Please inform yourself about the local rules on separate collection of batteries. The correct disposal of batteries helps prevent potentially negative consequences on the environment and human health. Remove the integrated battery Warning Make sure the headset is disconnected from the USB charging cable • before removing the battery. If there is no collection/recycling system for electronic products in your country, you can protect the environment by removing and recycling the battery before disposing the headset. 1 Important Hearing Safety Danger To avoid hearing damage, limit the time you use the headphones at high volume and set • the volume to a safe level. The louder the volume, the shorter is the safe listening time. Be sure to observe the following guidelines when using your headphones. Listen at reasonable volumes for reasonable periods of time.• Be careful not to adjust the volume continuously upwards as • your hearing adapts. Do not turn up the volume so high that you can’t hear what’s • around you. You should use caution or temporarily discontinue use in • potentially hazardous situations. Excessive sound pressure from earphones and headphones • can cause hearing loss. Using this headset with both ears covered while driving is not • recommended and may be illegal in some areas while driving. For your safety, avoid distractions from music or phone calls • while in traffic or other potentially dangerous environments. Electric-, Magnetic- and Electromagnetic Fields (EMF) 1. Royal Philips Electronics manufactures and sells many products targeted at consumers, which, like any electronic apparatus, in general have the ability to emit and receive electromagnetic signals. 2. One of Philips’ leading Business Principles is to take all necessary health and safety measures for our products, to comply with all applicable legal requirements and to stay well within the EMF standards applicable at the time of producing products. 3. Philips is committed to develop, produce and market products that cause no adverse health effects. 4. Philips confirms that if its products are handled properly for their intended use, they are safe to use according to scientific evidence available today. 5. Philips plays an active role in the development of international EMF and safety standards, enabling Philips to anticipate further developments in standardization for early integration in its products. General information To avoid damage or malfunction: Do not expose the headset to excessive heat.• Do not drop your headset.• The headset can be washable under running water while • the USB charging cable or USB power adaptor shall not be exposed to dripping or splashing. Do not allow your headset to be submerged in water.• Do not use any cleaning agents containing alcohol, ammonia, • benzene, or abrasives. The main plug of AC/DC adaptor is used as the disconnect • device, the disconnect device shall be readily operable. EN 3 Notice for USA (FCC) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference b…

Text truncated - open the document above for the full version.

1 Photographs - EUT Constructional Details

Location Content:FCC ID: BOUSHB6000 IC: 135T ‐ SHB6000

SGS-CSTC Standards Technical Services Co., Ltd. No. 1 Workshop, M-10, Middle Section, Science & Technology Park, District Shenzhen, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 Email: [email protected] Page: 1 of 1 FCC ID: BOUSHB6000 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 1.1 RF Exposure Compliance Requirement 1.1.1 Standard requirement 15.247(b)(4) requirement: (4) The conducted output power limit specified in paragraph (b) of this section is based on the use of antennas with directional gains that do not exceed 6 dBi. Except as shown in paragraph (c) of this section. if transmitting antennas of directional gain greater than 6 dBi are used. the conducted output power from the intentional radiator shall be reduced below the stated values in paragraphs (b)(1). (b)(2). and (b)(3) of this section. as appropriate. by the amount in dB that the directional gain of the antenna exceeds 6 dBi. 1.1.2 EUT RF Exposure The Max Conducted Peak Output Power is 5.83dBm(3.828mW) in lowest channel; The best case gain of the antenna is 0 dBi. 0.5dB logarithmic terms convert to numeric result is nearly 1 According to the formula. calculate the EIRP test result: EIRP= P x G = 3.828 mW x 1 = 3.828mW ① SAR requirement: S= 60 / f(GHz) = 60/2.402 = 24.98 mW ② ; ① < ②. So the SAR report is not required.

SGS-CSTC Standards Technical Services Ltd. No. 1 Workshop, M-10, Middle section, Science & Technology Park, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 Email: [email protected] Report No.: SZEMO10060374801 Page: 1 of 63 Authorized Signature: Jack Zhang Laboratory Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 1 Cover Page FCC REPORT Application No: SZEMO100603748RF Applicant: Philips Consumer Lifestyle Product Name: Bluetooth Stereo Headset Operation Frequency: 2.402GHz to 2.480GHz FCC ID: BOUSHB6000 Standards: FCC CFR Title 47 Part 15 Subpart C Section 15.247: 2008 Date of Receipt: 2010-06-25 Date of Test: 2010-06-25 to 2010-07-06 Date of Issue: 2010-07-20 Test Result : PASS * * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Ltd. Report No.: SZEMO10060374801 Page: 2 of 63 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 2 Contents Page 1 COVER PAGE.........................................................................................................................................................1 2 CONTENTS.............................................................................................................................................................. 2 3 TEST SUMMARY.................................................................................................................................................... 3 4 GENERAL INFORMATION................................................................................................................................... 4 4.1 CLIENT INFORMATION.......................................................................................................................................... 4 4.2 GENERAL DESCRIPTION OF E.U.T. ....................................................................................................................... 4 4.3 E.U.T OPERATION MODE...................................................................................................................................... 6 4.4 TEST FACILITY..................................................................................................................................................... 7 4.5 TEST LOCATION................................................................................................................................................... 7 4.6 OTHER INFORMATION REQUESTED BY THE CUSTOMER........................................................................................ 7 4.7 TEST INSTRUMENTS LIST...................................................................................................................................... 8 5 TEST RESULTS AND MEASUREMENT…

Text truncated - open the document above for the full version.

1 Photographs-test setup photo Conducted Emission Radiated Spurious Emission