BRWDASRX11R/C Transmitter

Spektrum AR6100ML Instructions Note: The AR6100ML receiver is designed for parkflyer aircraft only. This includes all types of compact electric airplanes as well as mini and micro helicopters. While the AR6100ML receiver has more than adequate range for parkflyer aircraft, it is imperative that it not be used in larger aircraft that could exceed its operational range. IMPORTANT: The AR6100 features DSM ® 2 second-generation Spektrum ® technology and is not compatible with the DX6 parkflyer radio. The AR6100ML is only compatible with Spektrum aircraft transmitters that support DSM2 technology, like the DX7. Binding Before using the AR6100, it’s necessary to bind the receiver to the desired transmitter (or specific model memory if Model Match ™ is available). Binding is the process of programming the receiver to recognize the specific transmitter you wish to use. During binding, the receiver learns the specific transmitter’s code (GUID) and, when bound, the receiver will only respond to its bound transmitter, ignoring all other types of interfering signals. During binding the fail-safe positions are stored (see SmartSafe ™ below). Note: Receivers can be re-bound at any time, allowing them to be used with other transmitters or to store different fail-safe positions. How to Bind With the power off, plug the bind plug into the BATT port. BATT THRO BATT AILE ELEV RUDD MICROLITE RECEIVER 2.4GHz DSM2 GEAR AUX1 BIND PLUG Power on the receiver. If the receiver is installed in an electric aircraft, turn on the speed controller to power up the receiver. If the receiver is going to be powered by a separate battery, plug the battery into any unused port. The amber light will blink, indicating the AR6100 is in bind mode. Position the transmitter’s control sticks and switches in the desired fail-safe positions (normally low throttle and all other controls at neutral). POWER Press and hold the bind button on the back of the transmitter while turning on the transmitter. The button will flash for several seconds, then the LED on the transmitter and receiver will remain solid on, indicating a successful bind. $3# ").$2!.'%4%34 IMPORTANT: Remove the bind plug to prevent the system from rebinding the next time the power is turned on. BATT THRO BATT AILE ELEV RUDD MICROLITE RECEIVER 2.4GHz DSM2 GEAR AUX1 BIND PLUG Model Match Some Spektrum transmitters (such as the DX7) offer a patented feature called Model Match ™ . Model Match prevents the possibility of operating a model using the wrong model memory, potentially preventing a crash. With Model Match each model memory has its own unique code (GUID) and during the binding process the code is programmed into the receiver. Later, when the system is turned on, the receiver will only connect to the transmitter if the corresponding model memory is programmed on screen. Note: If at any time you turn on the system and it fails to connect, check to be sure the correct model memory is selected in the transmitter. SmartSafe Your AR6100ML features SmartSafe ™ fail-safe programming. SmartSafe prevents accidental motor operation before the system connects and, in the unlikely event of signal loss, SmartSafe drives the throttle to a preset (off) position. With SmartSafe if the receiver is turned on before the transmitter, all channels but throttle will go to their fail-safe position stored during binding, while the throttle channel will not generate a pulse so as to not arm the electronic speed control. After the system is connected, if loss of signal occurs, the throttle will be driven to a preset fail-safe position, normally low throttle (set during binding) while all other channels will hold their last known position. Range Check Before each flying session and especially with a new model, it is important to perform a range check. Follow the procedures as outlined in the radio instruction manual. Specifications: Model: AR6100 Type: 6-channel DSM2 Parkflyer Dimensions: 30mm x 18mm x 10mm Weight: 3.5 grams Voltage: 3.5–9.0 volts Inspection or Repairs If this Product needs to be inspected or repaired, please call for a Return Merchandise Authorization (RMA). Pack the Product securely using a shipping carton. Please note that original boxes may be included, but are not designed to withstand the rigors of shipping without additional protection. Ship via a carrier that provides tracking and insurance for lost or damaged parcels, as Horizon is not responsible for merchandise until it arrives and is accepted at our facility. A Service Repair Request is available at www.horizonhobby.com on the “Support” tab. If you do not have internet access, please include a letter with your complete name, street address, email address and phone number where you can be reached during business days, your RMA number, a list of the included items, method of payment for any non-warranty expenses and a brief summary of the problem. Your original sales receipt must also be included for warranty consideration. Be sure your name, address, and RMA number are clearly written on the outside of the shipping carton. Warranty Inspection and Repairs To receive warranty service, you must include your original sales receipt verifying the proof-of- purchase date. Provided warranty conditions have been met, your Product will be repaired or replaced free of charge. Repair or replacement decisions are at the sole discretion of Horizon Hobby. Non-Warranty Repairs Should your repair not be covered by warranty the repair will be completed and payment will be required without notification or estimate of the expense unless the expense exceeds 50% of the retail purchase cost. By submitting the item for repair you are agreeing to payment of the repair without notification. Repair estimates are available upon request. You must include this request with your repair. Non-warranty repair estimates will be billed a minimum of ½ hour of labor. In addition you will be billed for return freight. Please advise us of your prefe…

Text truncated - open the document above for the full version.

American TCB 6731 Whittier Ave Suite C110 McLean, Va. 22101 November 28, 2006 Gentlemen: This is your letter of authorization to accept our appointment of Elliott Laboratories, Inc. as Agent for Horizon Hobby Inc., 1657 Country Club Dr., Milpitas CA 95035, to sign applications before the American TCB and the Commission and to make representations to you on our behalf. Elliott Laboratories is to receive and exchange data between our company and the Commission. This authorization is made pursuant to Section 2.911(c) of the FCC Rules and expires on 28 th November 2008. I hereby certify on behalf of Horizon Hobby Inc., 1657 Country Club Dr., Milpitas CA 95035 ("Applicant") that neither Applicant nor any party to the application (officers, directors, and 5% shareholders) is subject to a denial of Federal benefits that includes FCC benefits pursuant to section 5301 of the Anti-Drug Abuse Act of 1988. 21 U.S.C. 853a. Sincerely, Paul Beard Inventor, Lead Engineer - Spektrum PDF created with pdfFactory trial version www.pdffactory.com

Paul Beard Horizon Hobby Inc. 1657 Country Club Dr., Milpitas CA 95035 USA American TCB 6731 Whittier Ave Suite C110 McLean, Va. 22101 Novemder 28 th 2006 Dear Examiner: I am writing to avoid the possibility of an inadvertent disclosure of proprietary information. The accompanying Form 731 is being filed with the commission on our behalf by Elliott Laboratories, Inc., a consulting and testing laboratory. Included as exhibits with the enclosed application are block diagrams, schematics, and a detailed description of the theory of operation of the device. It is our intention to provide the commission with a full disclosure of our product so that its merits can be evaluated. Indeed, we are pleased to provide any further information that the commission might wish to see. It is not our intention, however, to make our proprietary process a matter of public record. In view of the fact that the block diagrams, schematics, and associated theory of operation disclose the mechanism of our process, we ask that these portions (block diagrams, schematics, and theory of operation) of our application be withheld from public inspection as provided under FCC section 0.459. These documents contain details of the proprietary operation of product. These details are not readily discernible - even to technically sophisticated individuals - from our hardware and constitute trade secrets. In addition, we request temporary non-disclosure for the user manual and all photographs. We request therefore that these documents and this letter be segregated from the body of our evaluation report and withheld from public inspection. Thank you for your attention. Please let the undersigned know if the Commission disagrees with our position or requires further justification. Sincerely, Paul Beard Inventor, Lead Engineer - Spektrum PDF created with pdfFactory trial version www.pdffactory.com

AUX 1GEARRUDDELEVAILETHROBATT 2.4GHz DSM2 2.4GHz DSM2 TECHNOLOGY 2.4GHz DSM2 TECHNOLOGY MICROLITE RECEIVER 6100 PATENT PENDING MADE IN TAIWAN ! FCC ID: BRWDASRX11

Frequency FCC low threshold FCC low threshold EUT Pout EUT ant. EUT EIRP MHz mW dBm dBm dBi dBm 2402 24.98 13.98 2.5 2 4.5 2476 24.20 13.84 1.2 2 3.2 The maximum EUT EIRP power is 4.5dBm. This is below the FCC low threshold calculated to be 13.84dBm. No SAR test or MPE distance limitation is required.

File: R66293 Rev 1 Page 1 of 18 2016-01 Electromagnetic Emissions Test Report and Application for Grant of Equipment Authorization pursuant to FCC Part 15 Subpart C on the Horizon Hobby, Inc. Transmitter Model: AR6100 FCC ID: BRWDASRX11 GRANTEE: Horizon Hobby, Inc. 4105 Fieldstone Road Champaign, IL 61822 TEST SITE: Elliott Laboratories, Inc. 684 W. Maude Ave Sunnyvale, CA 94086 REPORT DATE: November 30, 2006 FINAL TEST DATE: November 20, 2006 AUTHORIZED SIGNATORY: ______________________________ David W. Bare Chief Technical Officer Elliott Laboratories, Inc. is accredited by the A2LA, certificate number 2016-01, to perform the test(s) listed in this report. This report shall not be reproduced, except in its entirety, without the written approval of Elliott Laboratories, Inc. Elliott Laboratories, Inc. -- EMC Department Test Report Report Date: November 30, 2006 File: R66293 Rev 1 Page 2 of 18 pages REVISION HISTORY Revision # Date Comments Modified By 1 December 7, 2006 Initial Release David Guidotti Elliott Laboratories, Inc. -- EMC Department Test Report Report Date: November 30, 2006 File: R66293 Rev 1 Page 3 of 18 pages TABLE OF CONTENTS COVER PAGE............................................................................................................................................................. 1 REVISION HISTORY ..............................................................................................................................................2 TABLE OF CONTENTS ..........................................................................................................................................3 SCOPE........................................................................................................................................................................5 OBJECTIVE ..............................................................................................................................................................6 STATEMENT OF COMPLIANCE .........................................................................................................................6 TEST RESULTS SUMMARY..................................................................................................................................7 DIGITAL TRANSMISSION SYSTEMS (2400 – 2483.5MHZ) ............................................................................7 MEASUREMENT UNCERTAINTIES ...................................................................................................................7 EQUIPMENT UNDER TEST (EUT) DETAILS ....................................................................................................8 GENERAL..............................................................................................................................................................8 ANTENNA SYSTEM ............................................................................................................................................8 ENCLOSURE .........................................................................................................................................................8 MODIFICATIONS .................................................................................................................................................8 SUPPORT EQUIPMENT.......................................................................................................................................8 EUT INTERFACE PORTS ....................................................................................................................................8 EUT OPERATION .................................................................................................................................................8 TEST SITE .................................................................................................................................................................9 GENERAL INFORMATION .................................................................................................................................9 CONDUCTED EMISSIONS CONSIDERATIONS...............................................................................................9 RADIATED EMISSIONS CONSIDERATIONS...................................................................................................9 MEASUREMENT INSTRUMENTATION ..........................................................................................................10 RECEIVER SYSTEM ..........................................................................................................................................10 INSTRUMENT CONTROL COMPUTER ..........................................................................................................10 LINE IMPEDANCE STABILIZATION NETWORK (LISN) .............................................................................10 FILTERS/ATTENUATORS.................................................................................................................................11 ANTENNAS .........................................................................................................................................................11 ANTENNA MAST AND EQUIPMENT TURNTABLE .....................................................................................11 INSTRUMENT CALIBRATION.........................................................................................................................11 TEST PROCEDURES.............................................................................................................................................12 EUT AND CABLE PLACEMENT ......................................................................................................................12 CONDUCTED EMISSIONS ..............................................................................................................................…

Text truncated - open the document above for the full version.

Radiated Emissions Test Configuration Photographs