BXZDH5DECT Headset

PRELIMINARY TD 92643GB 30 September 2010 / Ver. PA4 User Manual Cordless Telephone 3740 for Avaya PRELIMINARY TD 92643GB 30 September 2010 / Ver. PA4 User Manual Cordless Telephone 3740 for Avaya Contents 1 Introduction .................................................................................................................... 1 1.1 Target Group ............................................................................................................................. 1 1.2 Prerequisite................................................................................................................................ 1 1.3 How to Use This Document.................................................................................................... 1 1.3.1 System Administrator................................................................................................... 1 1.3.2 End User............................................................................................................................ 1 1.4 Abbreviations and Glossary .................................................................................................. 2 1.5 Functions and Accessories ..................................................................................................... 3 2 Safety Instructions......................................................................................................... 5 2.1 Precautions ................................................................................................................................ 5 2.1.1 Frequency Range ............................................................................................................ 6 2.1.2 Warranty Notification ................................................................................................... 6 2.2 Regulatory Compliance Statements (EU/EFTA only) ...................................................... 6 2.3 Regulatory Compliance Statements (USA and Canada only) ....................................... 6 2.4 Environmental Requirements ............................................................................................... 7 3 Descriptions .................................................................................................................... 9 3.1 Cordless Telephone 3740....................................................................................................... 9 3.1.1 Hot Keys......................................................................................................................... 11 3.1.2 Alphanumeric Keys ..................................................................................................... 12 3.1.3 Icons and Text in the Display ................................................................................... 12 3.2 Accessories.............................................................................................................................. 15 3.2.1 Desktop Chargers ........................................................................................................ 15 3.2.2 Rack Charger................................................................................................................. 16 3.2.3 Battery Pack Charger.................................................................................................. 16 3.2.4 Belt Clips ........................................................................................................................ 16 3.2.5 Telephone lanyard ...................................................................................................... 16 3.2.6 Leather Casing ............................................................................................................. 16 3.2.7 Headset.......................................................................................................................... 16 4 Basic Operation............................................................................................................. 17 4.1 Switch the Telephone On/Off............................................................................................. 17 4.2 Turn the Audible Signal On/Off ......................................................................................... 17 4.3 Lock/Unlock the Keypad...................................................................................................... 17 4.4 Lock/Unlock the Keypad during Call................................................................................. 18 4.5 Lock/Unlock the Telephone ................................................................................................ 19 5 Menu Tree...................................................................................................................... 20 5.1 Calls .......................................................................................................................................... 20 5.2 Contacts .................................................................................................................................. 21 PRELIMINARY TD 92643GB 30 September 2010 / Ver. PA4 User Manual Cordless Telephone 3740 for Avaya 5.3 Profiles .................................................................................................................................... 22 5.4 Messaging .............................................................................................................................. 23 5.5 My Favourites ........................................................................................................................ 24 5.6 Short cuts ............................................................................................................................... 25 5.7 Connections ........................................................................................................................... 27 5.8 Settings ..............................................…

Text truncated - open the document above for the full version.

SECTION 15.3071b) AFFIDAVIT , Michael Stirna, Managing Director of UTAM, Inc., hereby swear and affirm that: ASCOM WIRELESS SOLUTIONS, [NC. is a participating member of UTAM, Inc. in good standing for purposes of Section 15.307(b) of the FCC rules. Subscribed to and sworn this 30th day of August, 2005 &L&oL ichael Stima, Managing Director UTAM, lnc. 1170 U.S. Hwy 22 P.O. Box 8126 Bridgewater, New Jersey 08807 Tel: (508) 526-3636 Affidavit #: ASCOO92005

Wireless Solutions CONFIDENTIAL Page 1(4) Dokumenttitel - Document title: Dokumenttyp - Document: type Model Difference letter DH5 Description Uppgjord av - Prepared by: Godkänd av - Approved by: Datum - Date: Version: Dok.nr - Doc no.: SEPsg 2010-10-14 C 1 SCOPE This document is intended to be used for describing the differences between the different variants of the DH5 handset from a certification point of view.. 1.1 DOCUMENT HISTORY Version Date Author Description A 2010-09-30 SEPsg First release B 2010-10-10 SEPsg 2:nd release, labelchapter removed to separate document label document C 2010-10-14 SEPsg 3:rd release clearify of no Bluetooth model Wireless Solutions CONFIDENTIAL Page 2(4) Dokumenttitel - Document title: Dokumenttyp - Document: type Model Difference letter DH5 Description Uppgjord av - Prepared by: Godkänd av - Approved by: Datum - Date: Version: Dok.nr - Doc no.: SEPsg 2010-10-14 C 2 DESCRIPTION Following models are available for DH5. The differences for each model is described below correlated to the product structure overview in next chapter. DH5-AABAAA (Model Messenger) DH5-AABCAA (Model Protector with No Movement/Man Down sensors) DH5-AABEAA (Model Protector with No Movement/Man Down sensors and Pull Cord) DH5-CAABAA (Avaya branded model Protector with alarm and without bluetooth) For Bluetooth: DH5-CAABAA is the only current model without Bluetooth, there just the hardware for Bluetooth is not mounted compared to the other models For Brand: • The branding plate (plastic marking) and label is different For Features: 1. The version without Alarm will not have the electronic parts for the pull cord switch and the NM/MD mounted on the PCB. And the alarm button on top of the handset are removed in the plastics, the electronic switch are still mounted. 2. The versions without NM/MD will not have the components for NM/MD mounted on the PCB. 3. The version without Pull-Cord will have a lid over the mechanical connection of the “pull cord”. Wireless Solutions CONFIDENTIAL Page 3(4) Dokumenttitel - Document title: Dokumenttyp - Document: type Model Difference letter DH5 Description Uppgjord av - Prepared by: Godkänd av - Approved by: Datum - Date: Version: Dok.nr - Doc no.: SEPsg 2010-10-14 C Branding plate Alarm button Pull-Cord lid Wireless Solutions CONFIDENTIAL Page 4(4) Dokumenttitel - Document title: Dokumenttyp - Document: type Model Difference letter DH5 Description Uppgjord av - Prepared by: Godkänd av - Approved by: Datum - Date: Version: Dok.nr - Doc no.: SEPsg 2010-10-14 C 3 PRODUCT STRUCTURE OVERVIEW

FCC ID: BXZDH5 Project no.: 157205 Page 1 of 2 EXTERNAL PHOTOS – ASCOM DH5 ASCOM DH5 DECT HANDSET FCC ID: BXZDH5 Project no.: 157205 Page 2 of 2 ASCOM DC3 DESKTOP CHARGER

Wireless Solutions CONFIDENTIAL Page 1(2) Dokumenttitel - Document title: Dokumenttyp - Document: type Model Difference labels DH5 Description Uppgjord av - Prepared by: Godkänd av - Approved by: Datum - Date: Version: Dok.nr - Doc no.: SEPsg 2010-10-14 A 1 SCOPE This document is intended to show the label which shall be used for the approved model of DH5 Document History Version Date Author Description A 2010-10-08 SEPsg First release B 2010-10-14 SEPsg 2:nd release labelupdating Wireless Solutions CONFIDENTIAL Page 2(2) Dokumenttitel - Document title: Dokumenttyp - Document: type Model Difference labels DH5 Description Uppgjord av - Prepared by: Godkänd av - Approved by: Datum - Date: Version: Dok.nr - Doc no.: SEPsg 2010-10-14 A 2 LABELLAYOUT PRODUCT AND BOX DH5-CAABAA (Avaya branded model Protector with alarm)

FCC ID: BXZDH5BL Project no.: 140534 Page 1 of 2 INTERNAL PHOTOS – ASCOM DH5BL Internal view FCC ID: BXZDH5BL Project no.: 140534 Page 2 of 2 Internal view – Shields off

DAT-P-152/98-01 SAR_Report_Nemko_6620_823_FCC_CalData_DH5 Appendix for the Report Dosimetric Assessment of the Portable Device Ascom DH5 (FCC ID: BXZDH5) According to the FCC Requirements Calibration Data September 16, 2010 IMST GmbH Carl-Friedrich-Gauß-Str. 2 D-47475 Kamp-Lintfort Customer Ascom Sweden AB Wireless Solution P.O. Box 8783 SE-402 76 Gøteborg Dasy_Report_FCC_DECT_1900_1.1.doc/22.05.2006/CH DAT-P-152/98-01 Cal_D1900V2_SN5d051_0909 Page 1 of 8 _ Calibration_Certificate_Dipole_V1.0/01.08.2009/ABo Calibration Certificate Certificate No: Cal_D1900V2_SN5d051_0909 Object: D1900V2 SN: 5d051 Date of Calibration: September 09, 2009 Next Calibration: September 2011 Object Condition: In Tolerance Calibration Equipment used: Test Equipment Serial Number Last calibration Calibrated by Next calibration Powermeter E4416A GB41050414 Dec 08 Agilent Techn. (ISO/IEC 17025, 1-1784162174-1) Dec 10 Power Sensor E9301H US40010212 Dec 08 Agilent Techn. (ISO/IEC 17025, 1-1784041195-1) Dec 10 Powermeter E4417A GB41050441 Dec 08 Agilent Techn. (ISO/IEC 17025, 1-1674038198-1) Dec 10 Power Sensor E9301A MY41495584 Dec 08 Agilent Techn. (ISO/IEC 17025, 1-1784041307-1) Dec 10 Network Analyzer E5071C MY46103220 Aug 09 Rohde& Schwarz (14967-DKD-00201- 2009-08) Aug 10 Reference Probe ET3DV6 SN 1669 Feb 09 SPEAG, No ET3- 1669_Feb09 Feb 10 DAE3 SN 335 Feb 09 SPEAG, No DAE3- 335_Feb09 Feb 10 Cal_D1900V2_SN5d051_0909 Page 2 of 8 Calibration is performed according the following standards: IEEE 1528-2003 "IEEE Recommended Practice for Determining the Peak Spatial - Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communication Devices: Measurement Technique", December 2003 IEC 62209-1 "Procedure to measure the Specific Absorption Rate (SAR) for hand - held devices used in close proximity to the ear (frequency range of 300 MHz to 3GHz)", February 2005 Federal Communications Commission Office of Engineering & Technologies (FCCOET) "Evaluating Compliance wit FCC Guidelines for Human Exposure to Radiofrequency Electromagnetic Fields; Additional Information for Evaluating Compliance of Mobile and Portable Devices with FCC Limits for Human Exposure to Radiofrequency Emissions", Supplement C (Edition 01-01) to Bulletin 65 Additional Documentation: DASY 4 System Handbook prepared by: reviewed by: Alexander Rahn André van den Bosch test engineer quality assurance engineer 08/ABo Cal_D1900V2_SN5d051_0909 Page 3 of 8 Measurement Conditions DASY Version: Dasy 4; V4.7 Phantom: SAM Phantom 1340 Distance Dipole Center – TSL: 10mm With spacer Zoom Scan res. dx, dy, dz = 5mm Frequency: 1900 MHz ± 1MHz Head TSL Parameters Temperature Permittivity Conductivity Nominal Head TSL Parameters 22.0 40.0 1.40 Measured Head TSL Parameters 22.0 40.3 ± 6% 1.45 S/m ± 6% SAR result with Head TSL Averaged over 1g SAR measured 250mW input power 9.10 mW/g SAR normalized normalized to 1W 36.40 mW/g SAR for nominal Head TSL parameters normalized to 1W 35.90 mW/g ± 16.5 % (k=2) Averaged over 10g SAR measured 250mW input power 4.76 mW/g SAR normalized normalized to 1W 19.04 mW/g SAR for nominal Head TSL parameters normalized to 1W 18.96 mW/g ± 16.5 % (k=2) Cal_D1900V2_SN5d051_0909 Page 4 of 8 Body TSL Parameters Temperature Permittivity Conductivity Nominal Body TSL Parameters 22.0 53.30 1.52 Measured Body TSL Parameters 22.0 52.90 ± 6% 1.54 S/m ± 6% SAR result with Body TSL Averaged over 1g SAR measured 250mW input power 9.42 mW/g SAR normalized normalized to 1W 37.68 mW/g SAR for nominal Body TSL parameters normalized to 1W 37.28 mW/g ± 16.5 % (k=2) Averaged over 10g SAR measured 250mW input power 4.97 mW/ g SAR normalized normalized to 1W 19.88 mW/g SAR for nominal Body TSL parameters normalized to 1W 19.77 mW/g ± 16.5 % (k=2) General Antenna Parmeters Antenna Parameters with Head TSL Impedance, transformed to feed point 48.2 jΩ - 1.3 jΩ Return Loss -33.0 dB Antenna Parameter with Body TSL Impedance, transformed to feed point 53.9 jΩ - 0.4 jΩ Return Loss -28.3 dB After long term use with 100W radiated power, only a slight warming of the dipole near the feedpoint can be measured. The dipole is made of standard semigrid coaxial cable. The center conductor of the feeding line is directly connected to the second arm of the dipole. The antenna is therefore short-circuited for DC signals. Additional EUT Data Manufactured by: SPEAG Manufactured on: January 15, 1998 Cal_D1900V2_SN5d051_0909 Page 5 of 8 SAR result with Head TSL Test Laboratory: IMST GmbH, DASY Blue (I); File Name: 090909_b_1669.da4 DUT: Dipole 1900 MHz SN: 5d051; Type: D1900V2; Serial: D1900V2 - SN5d051 Program Name: System Performance Check at 1900 MHz Communication System: CW; Frequency: 1900 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1900 MHz; σ = 1.45 mho/m; ε r = 40.3; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY4 Configuration: - Probe: ET3DV6R - SN1669; ConvF(5.11, 5.11, 5.11); Calibrated: 10.02.2009 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn335; Calibrated: 09.02.2009 - Phantom: SAM Glycol 1176; Type: Speag; Serial: 1176 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 d=10mm, Pin=250mW/Area Scan (7x7x1): Measurement grid: dx=10mm, dy=10mm Maximum value of SAR (measured) = 10.4 mW/g d=10mm, Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 91.3 V/m; Power Drift = -0.152 dB Peak SAR (extrapolated) = 15.9 W/kg SAR(1 g) = 9.1 mW/g; SAR(10 g) = 4.76 mW/g Maximum value of SAR (measured) = 10.3 mW/g Cal_D1900V2_SN5d051_0909 Page 6 of 8 SAR result with Body TSL Test Laboratory: IMST GmbH, DASY Blue (I); File Name: 090909_b_1669.da4 DUT: Dipole 1900 MHz SN: 5d051; Type: D1900V2; Serial: D1900V2 - SN5d051 Program Name: System Performance Check at 1900 MHz Communication System: CW; Frequency: 1900 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1900 MHz; σ = 1.54 mho/m; ε r = 52.9; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY4 Configuration: - …

Text truncated - open the document above for the full version.

DAT-P-152/98-01 SAR_Report_Nemko_6620_823_FCC_DECT_DH5 Page 1 of 34 Report Dosimetric Assessment of the Portable Device Ascom DH5 (FCC ID: BXZDH5) According to the FCC Requirements September 16, 2010 IMST GmbH Carl-Friedrich-Gauß-Str. 2 D-47475 Kamp-Lintfort Customer Ascom Sweden AB Wireless Solution P.O. Box 8783 SE-402 76 Gøteborg The test results only relate to the items tested. This report shall not be reproduced except in full without the written approval of the testing laboratory. Dasy_Report_FCC_DECT_1900_1.3.doc/10.09.2010/ABo SAR_Report_Nemko_6620_823_FCC_DECT_DH5 Page 2 of 34 Dasy_Report_FCC_DECT_1900_1.3.doc/10.09.2010/ABo Executive Summary The DH5 is a cordless telephone (Portable Device) from Ascom operating in the 1920 MHz frequency range (US DECT Standard). The device has two integrated antennas which are working as a diversity system. The objective of the measurements done by IMST was the dosimetric assessment of one DH5 device. The handset was set to use one specific antenna and frequency during the measurement. The examinations have been carried out with the dosimetric assessment system „DASY4“. The measurements were made according to the Supplement C to OET Bulletin 65 of the Federal Communications Commission (FCC) Guidelines [OET 65] for evaluating compliance of mobile and portable devices with FCC limits for human exposure (general population) to radiofrequency emissions. All measurements have been performed in accordance to the recommendations given by SPEAG. The Ascom DH5 cordless telephone (FCC ID: BXZDH5) is in compliance with the Federal Communications Commission (FCC) Guidelines [OET 65] for uncontrolled exposure. The phone was tested in addition to the head positions in the following body worn configurations:  with headset connected (display towards the phantom, distance 0 mm)  with headset connected (display towards the ground, distance 0mm) Maximum SAR 1g = 0.011 W/kg (Body worn, with headset connected, display towards the phantom, Channel 2, Antenna 2) prepared by: ........................................ reviewed by: ..................................... Alexander Rahn André van den Bosch test engineer quality assurance engineer SAR_Report_Nemko_6620_823_FCC_DECT_DH5 Page 3 of 34 Dasy_Report_FCC_DECT_1900_1.3.doc/10.09.2010/ABo Table of Contents 1 SUBJECT OF INVESTIGATION .................................................................................................................... 4 2 THE IEEE STANDARD C95.1-1999 AND THE FCC EXPOSURE CRITERIA ....................................... 4 2.1 DISTINCTION BETWEEN EXPOSED POPULATION, DURATION OF EXPOSURE AND FREQUENCIES ........... 4 2.2 DISTINCTION BETWEEN MAXIMUM PERMISSIBLE EXPOSURE AND SAR LIMITS ....................................... 5 2.3 SAR LIMIT .................................................................................................................................................. 5 3 THE FCC MEASUREMENT PROCEDURE ................................................................................................. 6 3.1 GENERAL REQUIREMENTS......................................................................................................................... 6 3.2 DEVICE OPERATING NEXT TO A PERSON’S EAR ....................................................................................... 6 4 BODY-WORN CONFIGURATIONS .............................................................................................................. 9 4.1 POC (PTT) POSITION .............................................................................................................................. 10 4.2 PHANTOM REQUIREMENTS ...................................................................................................................... 10 4.3 TEST TO BE PERFORMED ......................................................................................................................... 10 5 THE MEASUREMENT SYSTEM ................................................................................................................. 10 5.1 PHANTOM ................................................................................................................................................. 12 5.2 PROBE ...................................................................................................................................................... 12 5.3 MEASUREMENT PROCEDURE .................................................................................................................. 13 5.4 UNCERTAINTY ASSESSMENT ................................................................................................................... 14 6 SAR RESULTS ............................................................................................................................................... 15 7 EVALUATION ................................................................................................................................................. 17 8 APPENDIX ....................................................................................................................................................... 19 8.1 ADMINISTRATIVE DATA ............................................................................................................................ 19 8.2 DEVICE UNDER TEST AND TEST CONDITIONS ......................................................................................... 19 8.3 TISSUE RECIPES ...................................................................................................................................... 19 8.4 MATERIAL PARAMETERS ......................................................................................................................... 20 8.5 SIMPLIFIED PERFORMANCE CHECKING ................................................................................................... 21 8.6 ENVIRONMENT .................................................................…

Text truncated - open the document above for the full version.

DAT-P-152/98-01 SAR_Report_Nemko_6620_823_FCC_DECT_SAR Plots_DH5 Page 1 of 16 Appendix for the Report Dosimetric Assessment of the Portable Device Ascom DH5 (FCC ID: BXZDH5) According to the FCC Requirements SAR Distribution Plots September 16, 2010 IMST GmbH Carl-Friedrich-Gauß-Str. 2 D-47475 Kamp-Lintfort Customer Ascom Sweden AB Wireless Solution P.O. Box 8783 SE-40276 Gøteborg The test results only relate to the items tested. This report shall not be reproduced except in full without the written approval of the testing laboratory. Dasy_Report_FCC_DECT_1900_1.1.doc/22.05.2006/CH SAR_Report_Nemko_6620_823_FCC_DECT_SAR Plots_DH5 Page 2 of 16 dasy_report_fcc_DECT_1900_plots_1.0.doc/110.05.2006/ABo Table of Contents 1 SAR DISTRIBUTION PLOTS, HEAD MEASUREMENTS, ANTENNA 1 ................................................ 3 2 SAR DISTRIBUTION PLOTS, HEAD MEASUREMENTS, ANTENNA 2 ................................................ 7 3 SAR DISTRIBUTION PLOTS, BODY MEASUREMENTS, ANTENNA 1 ............................................. 11 4 SAR DISTRIBUTION PLOTS, BODY MEASUREMENTS, ANTENNA 2 ............................................. 13 5 SAR Z-AXIS SCANS (VALIDATION) ......................................................................................................... 15 6 SAR Z-AXIS SCANS (MEASUREMENTS) ................................................................................................ 16 SAR_Report_Nemko_6620_823_FCC_DECT_SAR Plots_DH5 Page 3 of 16 dasy_report_fcc_DECT_1900_plots_1.0.doc/110.05.2006/ABo 1 SAR Distribution Plots, Head Measurements, Antenna 1 Test Laboratory: Imst GmbH, DASY Yellow (II); File Name: DH5_508_yplm_1_ant1.da4 DUT: ASCOM; Type: DH5; Serial: 10AD30200002 Program Name: DECT Communication System: DECT US; Frequency: 1924.99 MHz;Duty Cycle: 1:24 Medium parameters used: f = 1924.99 MHz; σ = 1.39 mho/m; ε r = 41.6; ρ = 1000 kg/m 3 Phantom section: Left Section DASY4 Configuration: - Probe: ET3DV6R - SN1579; ConvF(5.09, 5.09, 5.09); Calibrated: 20.01.2010 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn335; Calibrated: 10.02.2010 - Phantom: SAM Glycol 1340; Type: QD 000 P40 CB; Serial: TP-1340 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Cheek Left/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.006 mW/g Cheek Left/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 1.56 V/m; Power Drift = -0.132 dB Peak SAR (extrapolated) = 0.010 W/kg SAR(1 g) = 0.00595 mW/g; SAR(10 g) = 0.00295 mW/g Maximum value of SAR (measured) = 0.007 mW/g Fig. 1: SAR distribution for DECT US, channel 2, cheek position, left side of head (September 13, 2010; Ambient Temperature: 20.9°C; Liquid Temperature: 20.5°C). SAR_Report_Nemko_6620_823_FCC_DECT_SAR Plots_DH5 Page 4 of 16 dasy_report_fcc_DECT_1900_plots_1.0.doc/110.05.2006/ABo Test Laboratory: Imst GmbH, DASY Yellow (II); File Name: DH5_508_yplm_2_ant1.da4 DUT: ASCOM; Type: DH5; Serial: 10AD30200002 Program Name: DECT Communication System: DECT US; Frequency: 1924.99 MHz;Duty Cycle: 1:24 Medium parameters used: f = 1924.99 MHz; σ = 1.39 mho/m; ε r = 41.6; ρ = 1000 kg/m 3 Phantom section: Left Section DASY4 Configuration: - Probe: ET3DV6R - SN1579; ConvF(5.09, 5.09, 5.09); Calibrated: 20.01.2010 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn335; Calibrated: 10.02.2010 - Phantom: SAM Glycol 1340; Type: QD 000 P40 CB; Serial: TP-1340 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Tilted Left/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.004 mW/g Tilted Left/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 1.28 V/m; Power Drift = -0.073 dB Peak SAR (extrapolated) = 0.006 W/kg SAR(1 g) = 0.00322 mW/g; SAR(10 g) = 0.00147 mW/g Fig. 2: SAR distribution for DECT US, channel 2, tilted position, left side of head (September 13, 2010; Ambient Temperature: 20.9°C; Liquid Temperature: 20.5°C). SAR_Report_Nemko_6620_823_FCC_DECT_SAR Plots_DH5 Page 5 of 16 dasy_report_fcc_DECT_1900_plots_1.0.doc/110.05.2006/ABo Test Laboratory: Imst GmbH, DASY Yellow (II); File Name: DH5_508_yprm_1_ant1.da4 DUT: ASCOM; Type: DH5; Serial: 10AD30200002 Program Name: DECT Communication System: DECT US; Frequency: 1924.99 MHz;Duty Cycle: 1:24 Medium parameters used: f = 1924.99 MHz; σ = 1.39 mho/m; ε r = 41.6; ρ = 1000 kg/m 3 Phantom section: Right Section DASY4 Configuration: - Probe: ET3DV6R - SN1579; ConvF(5.09, 5.09, 5.09); Calibrated: 20.01.2010 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn335; Calibrated: 10.02.2010 - Phantom: SAM Glycol 1340; Type: QD 000 P40 CB; Serial: TP-1340 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Cheek Right/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.004 mW/g Cheek Right/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 1.30 V/m; Power Drift = 0.078 dB Peak SAR (extrapolated) = 0.008 W/kg SAR(1 g) = 0.0042 mW/g; SAR(10 g) = 0.00179 mW/g Maximum value of SAR (measured) = 0.005 mW/g Fig. 3: SAR distribution for DECT US, channel 2, cheek position, right side of head (September 13, 2010; Ambient Temperature: 20.9°C; Liquid Temperature: 20.5°C). SAR_Report_Nemko_6620_823_FCC_DECT_SAR Plots_DH5 Page 6 of 16 dasy_report_fcc_DECT_1900_plots_1.0.doc/110.05.2006/ABo Test Laboratory: Imst GmbH, DASY Yellow (II); File Name: DH5_508_yprm_2_ant1.da4 DUT: ASCOM; Type: DH5; Serial: 10AD30200002 Program Name: DECT Communication System: DECT US; Frequency: 1924.99 MHz;Duty Cycle: 1:24 Medium parameters used: f = 1924.99 MHz; σ = 1.39 mho/m; ε r = 41.6; ρ = 1000 kg/m 3 Phantom section: Right Section DASY4 Configuration: - Probe: ET3DV6R - SN1579; ConvF(5.09, 5.09, 5.09); Calibrated: 20.01.2010 - Sensor-Surface: 4mm (Mechanical…

Text truncated - open the document above for the full version.

Nemko AS, Gaustadalléen 30, P.O.Box 73 Blindern, NO-0314 Oslo Norway T +47 22 96 03 30 F +47 22 96 05 50 Enterprise number NO974404532 Visiting address: Nemko Kjeller, Instituttveien 6, P.O.Box 96, NO-2027 Kjeller Norway T +47 64 84 57 00 F +47 64 84 57 05 Test report no. : 140534-8 Item tested : DH5BL DECT Transceiver Type of equipment : DECT Handset with Bluetooth Module FCC ID : BXZDH5BL Client : Ascom Sweden AB FCC Part 15, subpart D Isochronous UPCS Device 1920 - 1930 MHz Industry Canada RSS-213, Issue 2 2 GHz Licence-exempt Personal Communications Service Devices (LE-PCS) 26 May 2010 Authorized by : .............................................. Egil Hauger Technical Verificator TEST REPORT FCC part 15D Report no.: 140534-8 FCC ID: BXZDH5BL Nemko AS, N-2007 Kjeller Page 2 (52) CONTENTS 1 GENERAL INFORMATION ............................................................................................................... 3 1.1 Testhouse Info ................................................................................................................................... 3 1.2 Client Information .............................................................................................................................. 3 1.3 Responsible Manufacturer (if other than client) ................................................................................. 3 2 TEST INFORMATION ....................................................................................................................... 4 2.1 Tested Item........................................................................................................................................ 4 2.2 Description of Tested Device ....................................................................................................…

Text truncated - open the document above for the full version.