BXZIPBS3IP DECT Base Station

TD 92579EN 10 April 2015 / Ver. N Installation and Operation Manual IP-DECT Base Station and IP-DECT Gateway (software version 7.2.X) TD 92579EN 10 April 2015 / Ver. N Installation and Operation Manual IP-DECT Base Station & IP-DECT Gateway (software version 7.2.X) Contents 1 Introduction............................................................................................................. 1 1.1 Abbreviations and Glossary ................................................................................ 2 2 IP Security ................................................................................................................ 3 2.1 IP Security Terminology ...................................................................................... 3 2.1.1 TLS (former SSL) ......................................................................................... 3 2.1.2 Public Key Infrastructure ............................................................................ 3 2.1.3 Cryptography ............................................................................................. 3 2.2 Introduction to IP Security in IP-DECT ................................................................. 5 2.2.1 Secure Web Access (https) ......................................................................... 5 2.2.2 TLS Certificates .......................................................................................... 5 2.3 IP-DECT Administrative Functions ....................................................................... 7 2.3.1 Configuration - HTTP ................................................................................. 7 2.3.2 Configuration - Certificates ........................................................................ 7 2.3.3 Configuration - SIPS ................................................................................... 7 2.3.4 Configuration - Secure RTP ........................................................................ 7 3 Configuration .......................................................................................................... 8 3.1 Requirements ..................................................................................................... 8 3.1.1 Web Browser Requirements ....................................................................... 8 3.2 Access the GUI ................................................................................................... 8 3.2.1 Determine the IP Address ........................................................................... 9 3.2.2 Change the Default Password .................................................................. 10 3.3 GUI Web Access .............................................................................................. 12 3.3.1 Login Page ............................................................................................... 12 3.3.2 Access Levels ........................................................................................... 12 3.3.3 Auditors .................................................................................................. 12 3.3.4 User Administrators ................................................................................. 12 3.3.5 System Administrators ............................................................................. 13 3.4 Configure the Mobility Master ......................................................................... 16 3.5 Configure the Standby Mobility Master ............................................................ 16 3.6 Configure the Pari Master ................................................................................ 17 3.7 Configure the Standby Pari Master ................................................................... 18 3.8 Configure the Master ....................................................................................... 18 3.9 Configure the Standby Master ......................................................................... 19 3.10 Plug and Play Configuration ........................................................................... 20 3.11 Configure the Radio ....................................................................................... 20 3.12 Configure Deployment ................................................................................... 21 3.13 Add Users ...................................................................................................... 21 3.13.1 Anonymous Registration ........................................................................22 TD 92579EN 10 April 2015 / Ver. N Installation and Operation Manual IP-DECT Base Station & IP-DECT Gateway (software version 7.2.X) 3.13.2 Individual Registration ............................................................................ 23 3.13.3 Easy Registration .................................................................................... 25 4 Operation............................................................................................................... 27 4.1.1 Name the IPBS and IPBL ........................................................................... 27 4.1.2 Change User Name and Password ............................................................ 27 4.1.3 Centralized Management of Administrator and Auditor Accounts Using Kerberos ................................................................................................... 28 4.1.4 Configure the NTP Settings ...................................................................... 37 4.1.5 Certificates .............................................................................................. 38 4.1.6 License .................................................................................................... 43 4.2.1 Set DHCP Mode ....................................................................................... 44 4.2.2 Set a Static IP Address .................................................…

Text truncated - open the document above for the full version.

IPBS3/DB1 Safety Instructions Sikkerhedsanvisninger Sicherheitshinweise Instrucciones de seguridad Consignes de sécurité Istruzioni di sicurezza Veiligheidsinstructies Sikkerhetsanvisninger Instruções de segurança Turvallisuusohjeet Säkerhetsinstruktioner 3 Safety Instructions IPBS3/DB1 English ...................................................................................... 5 Dansk ........................................................................................ 9 Deutsch .................................................................................. 13 Español ................................................................................... 17 Français .................................................................................. 21 Italiano.................................................................................... 25 Nederlands ............................................................................ 29 Norsk....................................................................................... 33 Português .............................................................................. 37 Suomi ...................................................................................... 41 Svenska .................................................................................. 45 4 Safety Instructions IPBS3/DB1 English5 English Safety Instructions IPBS3/DB1 Read these instructions before installing the equipment. For safe and efficient operation of the equipment, observe these instructions and all necessary safety precautions when using the equipment. Follow the installation instructions and adhere to all warnings and safety precautions located on the product, and product manuals. Changes or modifications to the equipment not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Precautions • Save this manual. It includes important safety information and operating instructions. Save all instructions for future reference. • Replace all guards, barriers, or fasteners. Close and secure all openings when you complete the installation or before you return the equipment to service. • Install all wiring according to local, state, and federal electrical code requirements. • Connect AC (power supply) only to designated power sources as marked on the product. • Danger: Never alter the AC cord or plug. If the plug will not fit into the outlet, have a proper outlet installed by a qualified electrician. Improper connection increases the risk of electric shock. • Ensure the AC receptacle is installed near the equipment and easily accessible. • When mounting the equipment on a wall, use fasteners supplied with the system. • Position the electrical cord to the AC power supply where it is least likely to be subjected to damage or stress. • Remove the electrical cord from an outlet by pulling gently on the AC adapter, not by pulling the cord. Safety Instructions IPBS3/DB1 6English Regulatory Compliance Statements  (EU/EFTA only) This equipment is intended to be used in the whole EU & EFTA. Hereby, Ascom (Sweden) AB, declares that the IPBS3 and DB1 are in compliance with the essential requirements and other relevant provisions of Radio Equipment Directive 2014/53/EU (RED), Electromagnetic Compatibility Directive 2014/30/EU (EMC) and Directive 2015/863 (RoHS3) amending Directive 2011/65/EU. The Declaration of Conformity is available at: https://www.ascom-ws.com/doc/ The equipment is marked with the label Regulatory Compliance Statements  (USA and Canada only) IPBS3 FCC ID: BXZIPBS3 IC: 3724B-IPBS3 DB1 FCC ID: BXZDB1 IC: 3724B-DB1 FCC compliance statements This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this Safety Instructions IPBS3/DB1 English7 equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Information to user This device complies with Part 15 of the FCC Rules and with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: 1. this device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: 1. this device may not cause interference, and 2. this device must accept any interference, including interference that may cause undesired operation of the device. Safety Instructions IPBS3/DB1 8English Modifications Changes or modifications to the equipment not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Exposure to radio frequency signals This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other a…

Text truncated - open the document above for the full version.

ascom Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7 435 Oakland Milis Road Columbia, MD 21046 2 019-08-30 Confidentiality request Ascom (Sweden) AB FCCID:BXZIPBS3 FC C Part 15 Certification This letter serves as an official request for confidentiality under FCC Rule Section 0.459. We have requested that the following documents required to be submitted with this application be withheld from public review: •Operational Description • Block Diagram •Schematics �hese documents contain detailed system·: and equipment description and related imformation about the product which Ascom (Sweden) AB considers being proprietary, COQ.{lc;i, M t(p;\ anq a custom desigo and otherwise would not release to the general public. Since the design isa basis from which future technological products will evolve, Ascom (Sweden,) AB considers that this information would be of benefit to its competitors and that the disclosure of the information in these documents would give competitors an unfair a:dva:ntage in the market. lf you have any questions, please feel free to contact me at the address shown below. In addition to the above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission's policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, Ascom requests that the Commission withholds the following documents from public viewing for one hundred eighty days after the date the grant of equipment authorization is issued: •Externa! Photographs •Interna! Photographs •Test Setup Photographs Ascom, Wireless Solutions PO Box B7B3, SE402 76 Gothenburg, Sweden T +46 31 55 93 00, F +46 31 55 20 31 www.ascom.com/ws Org.nr./F-skatt 556336-6292, VAT No. SE556336629201, REG. Office: GÖTEBORG

�mko FCC Part 15D -Compliance Information EUT AND PRODUCT INFORMATION Type of Equipment UPCS (DECT 6.0) Applicant Name Peter Söderberg Address Grimbodalen 2, SE-402 76 Göteborg Contact Mikael Nyström Phone +46 31 559 148 Email [email protected] Brand Name Ascom BASE STATION HANDSET / PORTABLE Wi reless Relay Station I Repeater EUT Type/System i:gJ □ □ Modular Approval □YES □ LMA □YES □ LMA □YES □ LMA FCCID BXZIPBS3 ISED ID (Canada) 3724B-IPBS3 Model name IPBS3 HVIN IPBS3-904391 PMN HWVersion SWVersion Maximum Antenna Gain 0.6 dBi Is EUT lnitiating Device □YES □YES□YES Does EUT transmit signaling □YES □YES □YES channels Number of slots in use simultaneously Frequency Band 1921.536 -1928.448 MHz Number of RF Channels 5 Frame Period 10 ms Max. Burst length Min. Burst Length Number of System Channels Supported DECT Slot Types IXl Full Slot □Long Slot I □Double Slot Operating Mode □Simplex IXl Duplex ANTENNA DIVERSITY Antenna Diversity Supported Base Station Handset fcc part 15d declarations rev.3.0 24-June-2019 1 2 3 4 1 2 TX □ □ □ □ □ □ Nemko AS, lnstituttveien 6, 2007 Kjeller, Norway Tel: +47 22 96 03 30 Fax: +47 22 96 05 50 Email: [email protected] RX □ □ □ □ □ i:gJ Page 1 (4) P B 11.0.0

EXTERNAL PHOTOS Project no.: 378220 FCC ID: BXZIPBS3 Page 1 (1)

Ascom (Sweden) AB Grimbodalen 2 417 49 Göteborg Sweden Ascom (Sweden) AB Grimbodalen 2 417 49 Göteborg Sweden Made in China Fabriqué en Chine 21-56 VDC; 250 mA Made in China Fabriqué en Chine RESET Insert date code at time of label printing. MAC: xx-xx-xx-xx-xx-xx IPBS3-A3/xx IPBS3-A3/xx MAC: xx-xx-xx-xx-xx-xx Label specification 12 characters. MAC: Barcode is code 128 format. This document contains confidential and proprietary information of Ascom and may not be copied, used or disclosed without the written permission of Ascom and must be returned upon request. 21-56 VDC; 250 mA Serial number, 8 characters. S/N: Barcode is code 128 format. S/N:123456789 S/N:123456789 S/N MAC number: MAC: 7898939 385021 yyWww yyWww yyWww When used, the CE mark must be easily readable FCC ID: BXZIPBS3 IC: 3724B-IPBS3 Complies with IMDA Standards DA103861 FCC ID: BXZIPBS3 IC: 3724B-IPBS3 242288 242288 The symbol indicating separate collection for EEE consists of the crossed-out wheeled bin. The symbol must be printed visibly, legibly and indelibly. RCM mark Australia: Height > 3mm HVIN: IPBS3-904391 HVIN: IPBS3-904391 This device complies with Part 15 of the FCC Rules. Operation is subjected to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAN ICES-3 (B)/NMB-3(B)

INTERNAL PHOTOS Project no.: 378220 FCC ID: BXZIPBS3 Page 1 (2) INTERNAL PHOTOS Project no.: 378220 FCC ID: BXZIPBS3 Page 2 (2)

FCC ID: BXZIPBS3 MPE Calculation for FCC Uncontrolled Environment Formula from page 18 of OET Bulletin 65, Edition 97-01 where:S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna Source Based Time Averaged Duty Cycle is 100% in calculation below Maximum peak output power at antenna input terminal:19.88(dBm) Maximum peak output power at antenna input terminal:0.097(W) Maximum antenna gain:0.60(dBi) Maximum antenna gain:1.148(numeric) Prediction distance:20(cm) Prediction frequency:1925(MHz) Time Averaged Duty Cycle100% MPE limit for uncontrolled exposure at prediction frequency:10.00(W/m^2) Power density at prediction frequency:0.0222(mW/cm^2) Power density at prediction frequency:0.222(W/m^2) Maximum allowable antenna gain:17.13(dBi) Margin of Compliance:16.53(dB) 2 4R PG S p =

Report No. 378220-01-R00 Template version: D Nemko Norway Nemko AS, Instituttveien 6, P.O. Box 96 Kjeller, 2007 Kjeller, Norway TEL +47 22 96 03 30 FAX +47 22 96 05 50 EMAIL [email protected] ENTERPRISE NUMBER NO974404532 nemko.com/no Test Report Product IP-DECT Base Station with PoE Name and address of the applicant Ascom Sweden AB Grimbodalen 2 SE-41749 Gothenburg, Sweden Name and address of the manufacturer Ascom Sweden AB Grimbodalen 2 SE-41749 Gothenburg, Sweden Model IPBS3 Rating PoE or 21-57 V DC (Max 250 mA, Max 5 Watts) Trademark ASCOM Serial number DUT5 Additional information DECT 6.0 Tested according to FCC Part 15, subpart D Isochronous UPCS Device, 1920 – 1930 MHz Industry Canada RSS 213, Issue 3 2 GHz License-Exempt Personal Communications Services (LE-PCS) Devices Order number 378220 Tested in period 2019-09-05 to 2019-09-17 and 2020-01-07 Issue date 2020-02-11 Name and address of the testing laboratory Instituttveien 6 Kjeller, Norway www.nemko.com CAB Number: FCC: NO0001 ISED: NO0470 TEL: +47 22 96 03 30 FAX: +47 22 96 05 50 An accredited technical test executed under the Norwegian accreditation scheme Prepared by [Frode Sveinsen] Approved by [G.Suhanthakumar] This report shall not be reproduced except in full without the written approval of Nemko. Opinions and interpretations expressed within this report are not part of the current accreditation. This report was originally distributed electronically with digital signatures. For more information please contact Nemko. TEST REPORT FCC part 15D Report no.: 378220-01-R00 FCC ID: BXZIPBS3 Nemko Norway, Instituttveien 6, Kjeller, Norway Page 2 (48) CONTENTS 1 INFORMATION ................................................................................................................................. 3 1.1 Tested Item ........................................................................................................................................ 3 1.2 Description of Tested Device ............................................................................................................. 3 1.3 Test Conditions .................................................................................................................................. 4 1.4 Test Engineer(s) ................................................................................................................................ 4 1.5 Digital Modulation Techniques ........................................................................................................... 4 1.6 Labeling Requirements ...................................................................................................................... 4 1.7 Antenna Requirement ........................................................................................................................ 4 1.8 Channel Frequencies ......................................................................................................................... 5 1.9 Other Comments ............................................................................................................................... 5 2 TEST REPORT SUMMARY .............................................................................................................. 6 2.1 General .............................................................................................................................................. 6 2.2 Test Summary ................................................................................................................................... 7 3 TEST RESULTS ................................................................................................................................ 8 3.1 Power Line Conducted Emissions ..................................................................................................... 8 3.2 Automatic Discontinuation of Transmission ....................................................................................... 9 3.3 Peak Power Output .......................................................................................................................... 10 3.4 Emission Bandwidth B ..................................................................................................................... 13 3.5 Power Spectral Density ................................................................................................................... 16 3.6 In-Band Unwanted Emissions, Conducted ...................................................................................... 19 3.7 Out-of-band Emissions, Conducted ................................................................................................. 21 3.8 Carrier Frequency Stability .............................................................................................................. 31 3.9 Frame Repetition Stability ................................................................................................................ 32 3.10 Frame Period and Jitter ................................................................................................................... 32 3.11 Monitoring Threshold, Least Interfered Channel .............................................................................. 34 3.12 Threshold Monitoring Bandwidth ..................................................................................................... 36 3.13 Reaction Time and Monitoring Interval ............................................................................................ 37 3.14 Time and Spectrum Window Access Procedure .............................................................................. 39 3.15 Acknowledgements and Transmission Duration .............................................................................. 42 3.16 Dual Access Criteria Check ............................................................................................................. 43 3.17 Alternative Monitoring Interval .…

Text truncated - open the document above for the full version.

TEST SET-UP PHOTOS Project no.: 378220 FCC ID: BXZIPBS3 Page 1 (1) Power line Conducted Emissions Test