BXZSH2DDECT + WiFi Smartphone

Ascom Myco™ 3 Quick Reference Guide Introduction Ascom Myco 3 is a handset running compatible general purpose apps downloaded from any App Store. The handset is intended to be used with a focus on information sharing as well as reading, typing, and analyzing information, for example pictures and information via third-party apps installed on the handset. This Quick Reference Guide (QRG) provides a brief overview of the most common features of the Ascom Myco 3 handset. The images in the QRG are taken from a handset with an English user interface. Some functionalities described in this QRG may differ from your handset depending on system configuration. Therefore images of the screen can also differ from how the screen looks on your handset. The information in this document is subject to change without notice. Remember to read the safety instructions included in the product delivery before using the handset. Android TM , Google TM and other marks are trademarks of Google LLC. ascom © 2018 Ascom (Sweden) AB. All rights reserved. TD93301 / 2018 / PA1 ascom Table of Contents Overview Views Communication Handset Buttons Handset Screens Calling Messaging Notification Notification Overview Manage Notifications Notification Drawer Quick Settings Settings 1 2 3 5 5 6 8 8 9 10 10 4 4 Charging Low Battery True Hot Swap Charge Battery Charge Handset 7 © 2018 Ascom (Sweden) AB. All rights reserved. TD93301 / 2018 / PA1 Multifunction buttons •Depending on configuration these button can be used for different purposes. For example, you can scan a barcode or start an app. Top multifunction button Power button Volume button Main display Back button Overview button Home button Back Camera Barcode scanner Exchangeable color pad for clip Clip Battery cover lock Battery pack Handset Multifunction buttons Multi-color LED Microphone Microphone Micro USB charging connector 3.5 mm Headset jack Overview Buttons The handset is equipped with Back, Home, Overview, Power, Volume up / down, and three Multifunction buttons. 1 1 Power Button •Long press to turn the handset on / off. •Press to wake up the screen from sleep mode. •Press to lock and put the handset to sleep. Volume Button •Press up to increase or press down to decrease the speaker and a loudspeaker volume. •Press and hold to put in a silent mode. Back Button •Press to navigate backwards, to the previous screen. Home Button •Press to wake the screen from the sleep mode. •In unlocked mode, press to navigate to the Home screen from any app. Overview Button •Press to see a list of all active apps. 2 3 2 3 4 5 6 1 4 6 5 Ascom IR location Front camera Overview 12 ascom © 2018 Ascom (Sweden) AB. All rights reserved. TD93301 / 2018 / PA1 ascom © 2018 Ascom (Sweden) AB. All rights reserved. TD93301 / 2018 / PA1 Views Handset Screens Your handset has two screens, the Home screen and the All apps screen . All the installed on the handset apps can be found on the Home screen, in the Shortcats panel of the Home screen, and in the All apps screen. I II I II Shortcut panel To get to the All apps section, swipe up from the bottom of the Home screen. To get back to the Home screen, swipe in the opposite direction of the current screen, or press the Back or Home buttons. Back button Home button Calling Communication NOTE: You can also make a call with the Contacts app by choosing the contact from the list. Messaging 1 2 Manual dialing Favorites Contacts Recent calls In the All apps screen, tap the Messages app icon . Tap the Start chat icon at the bottom of the screen to write a new message or tap the message to read and reply to it. In the All apps screen, tap the Phone app icon . Choose between manually dialing the phone number, choosing the contact from Favorites or Recent calls list, or using the Contacts . 1 2 Start chat 43 ascom © 2018 Ascom (Sweden) AB. All rights reserved. TD93301 / 2018 / PA1 ascom © 2018 Ascom (Sweden) AB. All rights reserved. TD93301 / 2018 / PA1 To open the Notification drawer, swipe down from the top of your screen. You can open the Notification drawer in unlocked mode and on the lock screen. Notification Drawer Swipe left or right to clean the notification (if allowed). Manage Notifications Tap the Down arrow icon or swipe down the notification to see the details (if offered). Douple tap the notification to open the app that sent it. Notification Overview Notifications appear in different places and formats, such as icons in the status bar or as detailed texts in the Notification drawer. In unlocked mode, notifications appear at the top of the screen. 1.App icon 2.App name 3.Timestamp 4.Expand indicator 5.Title / Headline 6.Supporting text 7.Actions 8.Contact icon 1 2 3 4 5 6 7 There are three ways to manage notifications on the lock screen: The Notification drawer shows a list of all notifications, such as missed calles, conversations, system and app messages. Incoming notifications first appear as icons in the status bar to show that some information appeared in the Notification drawer. Notifications Back button Home button To hide the Notification drawer, swipe upwards or tap outside the drawer, or press the Back or Home buttons. 8 Notifications 56 ascom © 2018 Ascom (Sweden) AB. All rights reserved. TD93301 / 2018 / PA1 ascom © 2018 Ascom (Sweden) AB. All rights reserved. TD93301 / 2018 / PA1 Low Battery If the battery level is low, charge the battery or change the battery pack to a fully charged as soon as possible. - Low battery icon - “Battery is low” notification A battery level of 5 % or less is indicated by: - Battery alert icon - “Battery is low” notification - Sound signal from a handset A battery level of 15 % or less is indicated by: True Hot Swap The handset has an easy replaceable battery that can be changed without switching the handset off. With hot-swaping function you can continue using the apps even when the battery is exchanged. -When removing the battery pack, your handset works for 30 seconds. -If the battery pack is not re…

Text truncated - open the document above for the full version.

1 ASCOM MYCO 3 Safety Instructions ᆹޘ䈤᰾ Sikkerhedsanvisninger Sicherheitshinweise Instrucciones de seguridad Consignes de sécurité Istruzioni di sicurezza Veiligheidsinstructies Sikkerhetsanvisninger Instrukcje bezpieczenstwa Instruções de Segurança Bezpecnostné pokyny Turvaohjeet Säkerhetsföreskrifter Precautions and Environmental Requirements 2 3 English ........................................................................................... 5 ѝ᮷................................................................................................ 7 Dansk ............................................................................................. 9 Deutsch........................................................................................ 11 Español ........................................................................................ 13 Français ....................................................................................... 15 Italiano......................................................................................... 17 Nederlands.................................................................................. 19 Norsk ............................................................................................ 21 Polski ............................................................................................ 23 Português.................................................................................... 25 Slovensky .................................................................................... 27 Suomi ........................................................................................... 29 Svenska ....................................................................................... 31 Appendix ..................................................................................... 33 4 Safety Instructions Ascom Myco 3 English5 English Safety Instructions Ascom Myco 3 Regulatory Information Your Ascom Myco 3 is intended to be a smartphone running compatible general purpose apps downloaded from any App Store. Ascom Myco 3 is intended to be used as a hub for sharing information as well as reading, typing, and analyzing information, for example pictures and information via third-party apps installed on the handset. NOTE: Product Designator for regulatory purposes of Ascom Myco 3 is SH2. For safe and efficient operation of the handset, observe all necessary safety precautions when using the handset, see Appendix Precautions and Environmental Requirements. Privacy of communications may not be ensured when using this phone. This product shall only be used with the following batteries: • Art.No.: 660578 Battery Pack Ascom Myco 3 (incl. Battery cover) Available chargers: • Art.No.: DC5-AAAB Desktop Charger • Art.No.: CR7-AAAA Rack Charger • Art.No.: CR8-AAAA Battery Pack Charger Available power adapter and Micro USB cable (Suppliers Designation): • Art.No.: 660587 USB Power supply • Art.No.: 660586 Micro USB cable For information about SAR values, see data sheets for Ascom Myco 3. Declaration of Conformity Hereby, Ascom (Sweden) AB, declares that the SH2 is in compliance with the essential requirements and other relevant provisions of Radio Equipment Directive 2014/53/EU and Directive (RoHS3) 2015/863 amending 2011/65/EU. The complete Declaration of Conformity is available at: https://www.ascom-ws.com/doc/ The product is marked with the labels Safety Instructions Ascom Myco 3 6 English Regulatory Information (USA and Canada) FCC and IC Compliance Statements The handset has been tested and found to comply with FCC RF Radiation Exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. Use of non-Ascom approved accessories may violate the FCC and ISED guidelines for RF exposure and should be avoided. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient, or relocate the receiving antennas. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer, or an experienced radio/TV technician for help. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la Classe B conforme á la norme NMB- 003 du Canada. Information to User Changes or modifications to the equipment not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC rules and with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: 1. this device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation. Band Restrictions (Canada) The band 5150-5250 MHz is restricted to indoor-only operation. ᆹޘ䈤᰾ $VFRP0\FR ѝ᮷7 ѝ᮷ ᆹޘ䈤᰾ $VFRP0\FR ᛘⲴ$VFRP0\FRᰘ൘䘀㹼Ӿԫօᓄ⭘〻ᒿ୶ᓇл䖭Ⲵެᇩ䙊⭘ᓄ ⭘〻ᒿ $VFRP0\FRᰘ൘֌Ѫؑ᚟ޡӛѝᗳˈ⭘Ҿ䈫ਆǃ䗃ޕ઼࠶᷀ؑ ᚟ˈֻྲ᡻ᵪкᆹ㻵Ⲵᅮйᯩᓄ⭘〻ᒿᨀ׋Ⲵ➗⡷઼ؑ᚟DŽ ⌘˖ࠪҾ$VFRP0\FRⲴⴁ㇑ⴞⲴˈӗ૱ḷ䇶ᅨѪ6+DŽ ѪҶ䇙᡻ᵪᆹޘ儈᭸ൠ䘀㹼ˈ൘֯⭘᡻ᵪᰦ㾱䚥ᆸᡰᴹᗵ㾱Ⲵᆹޘ 䱢㤳᧚ᯭˈ䈧৲䰵$SSHQGL[3UHFDXWLRQVDQG(QYLURQPHQWDO 5HTXLUHPHQWVDŽ ֯⭘↔᡻ᵪᰦਟ㜭ᰐ⌅؍䳌䙊䈍䳀⿱DŽ ↔ӗ૱䲀ᇊᩝ䝽ԕл⭥⊐֯⭘˖ Ь ୶૱ਧ˖660578⭥⊐…

Text truncated - open the document above for the full version.

2020-06-24 Nemko Canada Inc 303 River Road Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification Authority to Act as Agent On our behalf, I appoint Nemko A/S, Instituttveien 6, N-2007 Kjeller, Norway, to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by Nemko Canada Inc, still resides with, <<Replace with company Name and address>> . Dated this 24th of June 20 20 Agency agreement expiration date: 24 June 2021 By: Peter Söderberg Signature Printed Title: Global regulatory manager On behalf of : Telephone: +4631559148

Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 2020-07- 08 Confidentiality request Ascom (Sweden) AB FCCID:BXZSH2D FCC Part 15 Certification This letter serves as an official request for confidentiality under FCC Rule Section 0.459. We have requested that the following documents required to be submitted with this application be withheld from public review: •Operational Description •B lock Diagram •Schematics •Parts Lists •Tune Up Information •HW Design Description These documents contain detailed system and equipment description and related information about the product which Ascom (Sweden) AB considers being proprietary, confidential and a cus tom design and otherwise would not release to the general public. Since the design is a basis from which future technological products will evol ve, Ascom (Sweden) AB considers that this information would be of benefit to its competitors and that the disclosure of the information in these documents would give competitors an unfair advantage in the market. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Ascom, Wireless Solutions PO Box 8783, SE402 76 Gothenburg, Sweden T +46 31 55 93 00, F +46 31 55 20 31 www.ascom.com/ws Org.nr./F-skatt 556336-6292, VAT No. SE556336629201, REG. Office: GÖTEBORG Peter Söderberg Project manager RA Ascom (Sweden) AB +46 31 55 93 00 [email protected] Company: Phone: Email:

FCC Part 15D – Compliance Information Nemko AS, Instituttveien 6, 2007 Kjeller, Norway fcc part 15d declarations_v1.docx Tel: +47 22 96 03 30 Fax: +47 22 96 05 50 Page 1 (4) rev.3.0 24-June-2019 Email: [email protected] EUT AND PRODUCT INFORMATION Type of Equipment UPCS (DECT 6.0) Applicant Name Peter Söderberg Address Grimbodalen 2, SE-402 76 Göteborg Contact Mikael Nyström Phone +46 31 559 148 Email [email protected] Brand Name Ascom BASE STATION HANDSET / PORTABLE Wireless Relay Station / Repeater EUT Type/System ☐ ☒ ☐ Modular Approval ☐ YES ☐ LMA ☐ YES ☐ LMA ☐ YES ☐ LMA FCC ID BXZSH2D ISED ID (Canada) 3724B-SH2D Model name SH2-ADAA HVIN SH2-ADAA PMN HW Version P2A SW Version SH2_ADAA/2.0.0_alpha6 Maximum Antenna Gain 2dBi Is EUT Initiating Device ☐ YES ☒ YES ☐ YES Does EUT transmit signaling channels ☐ YES ☐ YES ☐ YES Number of slots in use simultaneously Frequency Band 1921.536 – 1928.448 MHz Number of RF Channels 5 Frame Period 10 ms Max. Burst length Min. Burst Length Number of System Channels 5 RF Channels, 5x12 = 60 TDMA Duplex Channels Supported DECT Slot Types ☒ Full Slot ☐ Long Slot ☐ Double Slot Operating Mode ☐ Simplex ☒ Duplex ANTENNA DIVERSITY Antenna Diversity Supported TX RX Base Station 1 ☐ ☐ 2 ☐ ☐ 3 ☐ ☐ 4 ☐ ☐ Handset 1 ☒ ☒ 2 ☒ ☒ FCC Part 15D – Compliance Information Nemko AS, Instituttveien 6, 2007 Kjeller, Norway fcc part 15d declarations_v1.docx Tel: +47 22 96 03 30 Fax: +47 22 96 05 50 Page 2 (4) rev.3.0 24-June-2019 Email: [email protected] ANTENNAS Base Station Antenna Type Internal External 1 ☐ ☐ 2 ☐ ☐ 3 ☐ ☐ 4 ☐ ☐ Does RX and TX use the same antenna(s)? ☐ Yes ☐ No Handset Antenna Type Internal External 1 LDS antenna ☒ ☐ 2 LDS antenna ☒ ☐ 3 ☐ ☐ Does RX and TX use the same antenna(s)? ☒ Yes ☐ No VOLTAGE AND TEMPERATURE RANGES VOLTAGES Base Station Handset or Portable WRS Nominal Voltage 3.8V Cut-Off Voltage (if applicable) POWER SOURCE Type Manufacturer Base Station or WRS Handset (Charger) Connections on Base ☐ PSTN ☐ USB ☐ Ethernet ☐ Others (please specify) .... ANCILLARY EQUIPMENT Description Type Manufacturer HOST DEVICE Description Type Manufacturer ADDITIONAL INFORMATION FCC Part 15D – Compliance Information Nemko AS, Instituttveien 6, 2007 Kjeller, Norway fcc part 15d declarations_v1.docx Tel: +47 22 96 03 30 Fax: +47 22 96 05 50 Page 3 (4) rev.3.0 24-June-2019 Email: [email protected] MANUFACTURERS DECLARATIONS FCC part 15.323 (c)(5) The applicant declares that the system in this application has more than 20 duplex system access channels defined, and that the system is operating in Least Interfered Channel (LIC) mode in accordance with this section. Applicant Agrees ☒ Yes ☐ No FCC part 15.323 (c)(5) No device or group of co-operating devices located within 1m of each other shall during any frame period occupy more than 6 MHz of aggregate bandwidth, or alternatively, more than one third of the time and spectrum windows defined by the system. Applicant Agrees ☒ Yes ☐ No FCC part 15.323 (c)(10) The applicant hereby declares that the system in this application does use the criteria of (c)(10) of this section. Applicant Agrees ☒ Yes ☐ No FCC part 15.323 (c)(11) The applicant hereby declares that system in this application does not use the criteria of (c)(11) of this section. Applicant Agrees ☒ Yes ☐ No FCC part 15.323 (c)(12) The provisions of (c)(10) or (c)(11) of this section shall not be used to extend the range of spectrum occupied over space or time for the purpose of denying fair access to spectrum to other devices. Applicant Agrees ☒ Yes ☐ No ADDITIONAL REMARKS: > DECLARED BY: 2020-03-31 Date Peter Söderberg Name (print) Signature FCC Part 15D – Compliance Information Nemko AS, Instituttveien 6, 2007 Kjeller, Norway fcc part 15d declarations_v1.docx Tel: +47 22 96 03 30 Fax: +47 22 96 05 50 Page 4 (4) rev.3.0 24-June-2019 Email: [email protected] About this document This document specifies the information that is needed to select the correct testcases and test procedures for testing to FCC Part 15D. The form must be completed by the applicant and submitted to Nemko before testing is started. Preparation of Equipment for Testing Note (a): Number of samples for testing The following samples are needed for FCC 15D testing: RF Conducted Tests: One sample with a 50 ohm antenna connector (preferably SMA Female). Only one antenna connector is needed for these tests even if the equipment has more than one antenna. Monitoring Tests: One sample with 50 ohm antenna connectors fitted to all antennas (preferably SMA female). Additionally we need a companion device that will work together with the EUT, the companion device must also have antenna connectors on all antennas. Radiated Tests: One sample with integral antennas. This sample will be used to measure Antenna Gain, Part 15B and Power-Line Conducted tests. Note (b): Burst Mode All RF tests are performed with the EUT in force transmit, aka burst mode. Software and necessary programming tools must be submitted to Nemko together with the test samples before start of testing. Note (c): Monitoring Tests Monitoring tests are performed in normal operating mode by establishing a connection from the handset (or the initiating device) to the base station (or the responding device). Most tests are performed by establishing connections from the initiating device to the responding device and observing which channel and/or timeslot is used. For monitoring tests we need a EUT and a Companion device that both have antenna connectors on all antennas (preferably SMA female, again). Additionally, we need access to the CLK100 signal on the Base Station, this is necessary because some of the tests require that the interferers are synced to the DECT frame. Note (d): Connection to an external power supply Means of connecting the equipment to an external power supply shall be supplied by the applicant together with the equipment to be tested. Battery operated equipment shall be supplied with the nece…

Text truncated - open the document above for the full version.

Ascom, Wireless Solutions PO Box 8783, SE402 76 Gothenburg, Sweden T +46 31 55 93 00, F +46 31 55 20 31 www.ascom.com/ws Org.nr./F-skatt 556336-6292, VAT No. SE556336629201, REG. Office: GÖTEBORG TO WHOM IT MAY CONCERN Gothenburg, 29:th July 2020 MODEL DIFFERENCE LETTER, IC: 3724B-SH2D, FCC ID BXZSH2D This letter is to explain the differences between the different variants of Ascom SH2 with the following model numbers: Model Description FCC ID IC ID SH2-ABAA Myco 3 WiFi only BXZSH2 3724B-SH2 SH2-ADAA Myco 3 WiFi + DECT BXZSH2D 3724B-SH2D SH2-ABAA contains disabled cellular circuitry (used in EU, unused in US), including antennas for 1.9GHz, and this disabled cellular circuitry are replaced with DECT circuitry. SH2-ADAA is compared to SH2-ABAA, an overview. • Wifi, NFC, GPS and Bluetooth circuitry, including its antennas has been kept as-is. • Cellular antennas in SH2-ABAA also include the US range of DECT frequencies and has not been modified, nor it’s matching network. • Circuitry for cellular parts (2G+3G+4G) has been removed and has been replaced with DECT circuits. • No other circuitry has been modified. The differences in details: Internal images from BXZSH2 “Internal phones” (SH2-ABAA) https://apps.fcc.gov/eas/GetApplicationAttachment.html?id=4228169 Antennas in the right picture are re-used as DECT antennas, not changed. Bottom PCB in not changed at all. Top layer on the Bottom PCB has changes: (SH2-ADAA, DECT, variant to the right) S IM card are removed, and RF frontend for Cellular are removed and replaced with a DECT counterpart in the blue squares. B ottom layer: (SH2-ADAA, DECT, variant to the right) N FC (Red square) + Wifi (Green square) are not changed in any way. RF frontend for Cellular are removed and replaced with a DECT counterpart in the blue square. Be st regards, _____ _______________________________ Peter Söderberg QA/RA Project manager ___ _ _ _ _ ?d., ________________ s� ______

EXTERNAL PHOTOS Project no.: 380626 FCC ID: BXZSH2D Page 1 (2) EXTERNAL PHOTOS Project no.: 380626 FCC ID: BXZSH2D Page 2 (2)

yyWwwSH2-ADAA/xx Made in China Fabriqué en Chine Ascom (Sweden) AB Grimbodalen 2 SE-417 49 Göteborg Sweden S/N: 1234567890 MAC: 123456789012 Insert date code at time of label printing. SH2-ADAA/xx Ascom (Sweden) AB Grimbodalen 2 SE-417 49 Göteborg Sweden yyWww S/N: 1234567890 See manual for battery and regulatory instructions. Voir le manuel pour la batterie et les instructions règlementaires Made in China Fabriqué en Chine Label specification The symbol indicating separate collection for EEE consists of the crossed-out wheeled bin. The symbol must be printed visibly, legibly and indelibly. This document contains confidential and proprietary information of Ascom and may not be copied, used or disclosed without the written permission of Ascom and must be returned upon request. Serial number S/N: Barcode is code 128 format. S/N MAC: 123456789012 Ascom Myco 3 DECT Wi-Fi yyWww Ascom Myco 3 DECT Wi-Fi FCC ID: BXZSH2D IC: 3724B-SH2D FCC ID: BXZSH2D IC: 3724B-SH2D Bluetooth listed When used, the CE mark must have a heigt of at leat 5 mm RCM mark Australia Height > 3 mm

INTERNAL PHOTOS Project no.: 380626 FCC ID: BXZSH2D Page 1 (3) INTERNAL PHOTOS Project no.: 380626 FCC ID: BXZSH2D Page 2 (3) INTERNAL PHOTOS Project no.: 380626 FCC ID: BXZSH2D Page 3 (3)

SAR Evaluation Report DUT Information Manufacturer Ascom Sweden AB Brand Name Myco 3 Model Name SH2-ADAA FCC ID BXZSH2D IC Number 3724B-SH2D DUT Type handset Intended Use < 20 cm to human body (portable device) > 20 cm to human body (mobile/fixed device) - next to the ear body-worn limb-worn hand-held front-of-face body supported clothing-integrated Prepared by Testing Laboratory IMST GmbH, Test Center Carl-Friedrich-Gauß-Str. 2 – 4 47475 Kamp-Lintfort Germany Laboratory Accreditation The Test Center facility ‘Dosimetric Test Lab’ within IMST GmbH is accredited by the German National ‘Deutsche Akkreditierungsstelle GmbH (DAkkS)’ for testing according to the scope as listed in the accreditation certificate: D-PL-12139-01-01. The German Bundesnetzagentur (BNetzA) recognizes IMST GmbH as CAB-EMC on the basis of the Council Decision of 22. June 1998 concerning the conclusion of the MRA between the European Community and the United States of America (1999/178/EC) in accordance with § 4 of the Recognition Ordinance of 11. January 2016. The recognition is valid until 20. July 2021 under the registration number: BNetzA-CAB-16/21-14. Prepared for Manufacturer Ascom Sweden AB Grimbodalen 2 SE-41749 Goteborg Sweden Test Specification Applied Standard / Rule IEEE 1528-2013; FCC CFR 47 § 2.1093; RSS-102 Issue 5 Exposure Category general public / uncontrolled exposure occupational / controlled exposure Test Result PASS FAIL Report Information Data Stored 6200132 Issue Date February 21, 2020 Revision Date July 29, 2020 Revision Number* 2 . *A new revision replaces all previous revisions and thus, become invalid herewith. Remarks This report relates only to the item(s) evaluated. This report shall not be reproduced, except in its entirety, without the prior written approval of IMST GmbH. The results and statements contained in this report reflect the evaluation for the certain model described above. The manufacturer is responsible for ensuring that all production devices meet the intent of the requirements described in this report. Report Issue Date: February 21, 2020 Revision Date: July 29, 2020 Revision No.: 2 SAR_FCC_ISED_6200132_HB_SH2_rev2 Page 2 of 126 SAR_Report_EN50566_EN62209 - 2_1.0.docx/09.06 444/A R SAR_Report_FCC_ISED_Headset _v 2 .0 Table of Contents 1 Subject of Investigation and Test Results ............................................................................................ 3 1.1 Technical Data of DUT ..................................................................................................................................... 3 1.2 Product Family / Model Variants ...................................................................................................................... 3 1.3 Antenna Configuration ..................................................................................................................................... 3 1.4 Test Specification / Normative References ...................................................................................................... 4 1.5 Attestation of Test Results ............................................................................................................................... 4 2 Quality Assurance ................................................................................................................................... 4 3 Exposure Criteria and Limits .................................................................................................................. 5 3.1 SAR Limits ....................................................................................................................................................... 5 3.2 Exposure Categories ........................................................................................................................................ 5 3.3 Distinction between Maximum Permissible Exposure and SAR Limits ............................................................ 5 4 The Measurement System ....................................................................................................................... 6 4.1 Phantoms ......................................................................................................................................................... 7 4.2 E-Field-Probes ................................................................................................................................................. 8 5 Measurement Procedure ......................................................................................................................... 9 5.1 General Requirement ....................................................................................................................................... 9 5.2 Test Position of DUT operating next to the Human Ear ................................................................................... 9 5.3 Test Position of DUT operating next to the Human Body ............................................................................... 12 5.4 Measurement Procedure ................................................................................................................................ 13 5.5 Additional Information for IEEE 802.11 (WiFi) Transmitters ........................................................................... 14 6 System Verification and Test Conditions ............................................................................................ 15 6.1 Date of Testing ............................................................................................................................................... 15 6.2 Environment Conditions ................................................................................................................................. 15 6.3 Tissue Simulating Liquid Recipes .................................................................................................................. 15 6.4 Tissue Simul…

Text truncated - open the document above for the full version.

SAR_FCC_ISED_6200132_HB_SH2_rev2_…

Text truncated - open the document above for the full version.