CADA50-890Soundbar

EN User manual 5.1 SoundBar System with 2.4Ghz Wireless SubwooferSB2160 Only use microfiber cloth to clean the product.Disposal of your old productand batteriesYour product is designed and manufactured withhigh quality materials and components, whichcan be recycled and reused. When this crossed-out wheeled bin symbol isattached to a product it means that the productis covered by the European Directive 2002/96/EC. Please inform yourself about the localseparate collection system for electrical andelectronic products.Please act according to your local rules and donot dispose of your old products with yournormal household waste.Correct disposal of your old product helps toprevent potential negative consequences for theenvironment and human health.Your product contains batteries covered by theEuropean Directive 2006/66/EC, which cannotbe disposed with normal household waste.Please inform yourself about the local rules onseparate collection of batteries because correctdisposal helps to prevent negativeconsequences for the environmental and humanhealth. Service Warning Risk of electric shock. Never remove thecasing of the product. To keep the warranty valid, never try to repairthe product yourself. If you have problems using this product, pleasecontact your dealer. You will be asked for themodel and serial number of your product. Themodel number and serial number are on theback or bottom of your product. Write thenumbers here:Model No. Serial No. Front side Back side Power Indicator (Red)Power InputPower SwitchPower SwitchMuteSound mode selectorSource (AUX 1-3)Subwoofer connection pairingSubwoofer levelVolume level Connect SubwooferSubwoofer indicator light Movie sound mode Music sound modeTV sound (Dual sound mode) Press :ON/standby; Hold: to connect with subwoofer Audio input option Volume- Volume+ Mounting brackets AUX1 AUX2 AUX3 Power Input (DC12V2A) AUX1 AUX2 AUX3 SubwooferRemote control CONNECT SUB ON OFF 1) When subwoofer is connected properly, both red and blue lights will be lit under normal operation.2) Press and hold “Connect Sub” button for 10 seconds. When subwoofer indicator light blinks, pair with soundbar. PowerInput sensitivityS/N(Main unit)Frequency responseWoofer transmit frequencyRemot control systemPower adaptorWeightSize(L*D*H)Standby powerOperating temperatureOperating humidity Main unit Woofer Infrared Main unit Main unit Main unit Woofer Woofer Woofer L*D*H L*D*H 1. Follow the installation guide for assembly 3. According to the source selected, select a sound mode tone (Movie, Music, TV)2. Switch on TV or other sources, use remote control or directly control the soundbar to select the input source. For first time use, the subwoofer will need to be paired with the soundbar. 1. Press and hold subwoofer "connect" button for 10seconds. The blue indicator light will flash and start pairing. 2. Then press and hold 'Power" button of soundbar or press and hold "Connect Sub" button on remote control, the power indicator will flash (other indicator off) and connect start. Subwoofer connection 5 6 Instructions for use Specifications        Retry pairing the soundbar and subwoofer and power is plugged and “ON”.           Press “Source” button on the remote control as it may be switched to a different source.         The is normal due to a large amount of audio data which needs to be refreshed and may cause a pause in sound output.           For normal use, there is no need to power off the subwoofer. The subwoofer will go to “Standby” mode if there is no signal after 60 seconds when the soundbar is powered off.       ! " W  #      $  $ %          && Kith Consumer Product Inc. (KCPI) expresses the following limited warranty on AFFINITY products. This warranty extends to a new product purchased from an authorized reseller/retailer within the U.S. by the original purchaser or consumer who received the product as a gift. Retain and provide the original bill of sale (or photocopy) as proof of purchase. It is also recommended that you retain original box and foam packaging. ' ()*Y  W +   ! (,-*/  KCPI warrants the parts in this product against defects in material or workmanship for a period of one (1) year from the date of original purchase from authorized retailers. Y 0  Warranty service shall be provided when a return authorization number (RMA#) is provided to you. Warranty extends to defects in materials or workmanship and does not cover cosmetic imperfections, damages incurred during shipment to KCPI, misuse, natural disasters or accidents.'W  $ If after following the user manual, quick start and troubleshooting guide, should you find it necessary to contact Customer Service directly, call 888-777-0450 from 7am-11pm Mon-Fri (Central Time) and 7am-6pm Sat-Sun (Central Time). Have your date of purchase, serial number, and a full understanding of the issue ready for your call center representative. FCC STATEMENT Operation is subject to the following two conditions: (1) this device may not cause interference, and(2) this device must accept any interference, including interference that may cause undesired operation of the device." 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to omply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in aresidential installation. This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used in accordance with theins…

Text truncated - open the document above for the full version.

SCS-F19: Confidentiality Request Letter Page 1 of 1 Rev 2.0 SHENZHEN VANKE LOUDSPEAKER PRODUCTS CO., LTD. April 1, 2012 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Confidentiality Request regarding application for certification of FCC ID: CADA50-890 We hereby request confidential treatment of information accompanying this application as outlined below: - Block Diagram - Operational Description - Schematic The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Client’s signature : Client’s name / title : Jianxin Hu/ Manager Contact information / address : Vanke Industrial Park, Bingtang Mountain, Shaping Road, Shawan, Buji Town, Longgang District, Shenzhen, China

This EUT could not be connected to a PC as a data transfer function Please refer the user’s manual, it is not belongs to a Computer Peripheral.

FCC Certification Label Location Sample Label location

FCC Certification label Sample

Antenna

Page 1 of 67 FCC ID: CADA50-890 ACCURATE TECHNOLOGY CO. LTD REPORT NO. ATE20120569 FCC CERTIFICATION On Behalf of SHENZHEN VANKE LOUDSPEAKER PRODUCTS CO., LTD. Soundbar Model No.: A50-890, A50-989, A50-1000, SB2160 FCC ID: CADA50-890 Prepared for : SHENZHEN VANKE LOUDSPEAKER PRODUCTS CO., LTD. Address : Vanke Industrial Park, Bingtang Mountain, Shaping Road, Shawan, Buji Town, Longgang District, Shenzhen, China Prepared by : ACCURATE TECHNOLOGY CO. LTD Address : F1, Bldg. A, Changyuan New Material Port, Keyuan Rd. Science & Industry Park, Nanshan, Shenzhen, Guangdong P.R. China Tel: (0755) 26503290 Fax: (0755) 26503396 Report Number : ATE20120569 Date of Test : April 1-6, 2012 Date of Report : April 6, 2012 Page 2 of 67 FCC ID: CADA50-890 ACCURATE TECHNOLOGY CO. LTD REPORT NO. ATE20120569 TABLE OF CONTENTS Description Page Test Report Certification 1. GENERAL INFORMATION .......................................................................................................... 4 1.1. Description of Device (EUT)....................................................................................................................4 1.2. Description of Test Facility ......................................................................................................................5 1.3. Measurement Uncertainty.........................................................................................................................6 2. MEASURING DEVICE AND TEST EQUIPMENT ..................................................................... 7 3. SUMMARY OF TEST RESULTS................................................................................................... 8 4. FUNDAMENTAL AND HARMONICS RADIATED EMISSION FOR SECTION 15.249(A) 9 4.1. Block Diagram of Test Setup....................................................................................................................9 4.2. The Emission Limit ................................................................................................................................10 4.3. Configuration of EUT on Measurement .................................................................................................10 4.4. Operating Condition of EUT ..................................................................................................................10 4.5. Test Procedure ........................................................................................................................................11 4.6. The Field Strength of Radiation Emission Measurement Results ..........................................................12 5. SPURIOUS RADIATED EMISSION FOR SECTION 15.249(D) ............................................. 15 5.1. Block Diagram of Test Setup..................................................................................................................15 5.2. The Emission Limit For Section 15.249(d) ............................................................................................15 5.3. EUT Configuration on Measurement .....................................................................................................16 5.4. Operating Condition of EUT ..................................................................................................................16 5.5. Test Procedure ........................................................................................................................................17 5.6. The Emission Measurement Result ........................................................................................................18 6. BAND EDGES ................................................................................................................................. 21 6.1. The Requirement ....................................................................................................................................21 6.2. EUT Configuration on Measurement .....................................................................................................21 6.3. Operating Condition of EUT ..................................................................................................................21 6.4. Test Procedure ........................................................................................................................................21 6.5. The Measurement Result ........................................................................................................................22 7. AC POWER LINE CONDUCTED EMISSION FOR FCC PART 15 SECTION 15.207(A) .. 24 7.1. Block Diagram of Test Setup..................................................................................................................24 7.2. The Emission Limit ................................................................................................................................24 7.3. Configuration of EUT on Measurement .................................................................................................25 7.4. Operating Condition of EUT ..................................................................................................................25 7.5. Test Procedure ........................................................................................................................................25 7.6. Power Line Conducted Emission Measurement Results ........................................................................26 8. ANTENNA REQUIREMENT........................................................................................................ 27 8.1. The Requirement ....................................................................................................................................27 8.2. Antenna Construction .............................................................................................................................27 APPENDIX I ( TEST CURVES) (39 pages) Page 3 of 67 FCC ID: CADA50-890 ACCU…

Text truncated - open the document above for the full version.

Conducted emissions test Radiated emissions test < 30MHz Radiated emissions test < 1GHz Radiated emissions test > 1GHz