CKOICR001Insert Card Reader Color Glo

Insert Card Reader Color Glo Service Mode User Manual Manual version: V1.0 Last amended 15 October, 2014 Model: ICR-001 www.embedcard.com 1 Copyright © 2014 by Embed International Notice of Rights All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of Embed. For more information on getting permission for reprints and excerpts, contact Embed. Notice of Liability The information in this document is distributed on an “as is” basis, without warranty. While every precaution has been taken in the preparation of this document, neither the author or Embed shall have any liability to any person or entity with respect to any loss or damage caused or alleged to be caused directly or indirectly by the instructions contained in this document or by the computer software or hardware products described herein. www.embedcard.com Embed USA Suite 100A 1621 West Crosby Rd Carrolton, TX, 75006 Telephone: +1 (469) 521 8000 Facsimile: +1 (214) 260 0976 Information: [email protected] Sales: [email protected] Support: [email protected] Embed International 94 Howe St Osborne Park, WA, 6017 Australia Telephone: +61 (08) 9340 0100 Facsimile: +61 (08) 9340 0199 Information: [email protected] Sales: [email protected] Support: [email protected] www.embedcard.com 2 Contents 1 LIST OF ACRONYMS ................................................................................................................ 3 2 SAFETY INFORMATION .......................................................................................................... 3 PROTECTING AGAINST ELECTROSTATIC DISCHARGE ............................................................................. 3 POWER SUPPLY DETAILS RANGE .......................................................................................................... 3 OTHER INFORMATION AND WARNINGS: ................................................................................................ 3 3 PRODUCT OVERVIEW: ............................................................................................................ 4 RECOMMENDED INSTALLATION HARDWARE ........................................................................................ 5 4 PRE-INSTALLATION ................................................................................................................. 6 5 ICR INSTALLATION .................................................................................................................. 7 NETWORK INTERFACE .......................................................................................................................... 9 6 CE – DECLARATION OF CONFORMITY ............................................................................ 12 7 WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE) STATEMENT ..... 13 www.embedcard.com 3 1 List of Acronyms 2 Safety Information This guide assumes that the installer is qualified to work on electrical devices, with electronic skills and experience working with arcade machines. Do not use in life critical or applications requiring high reliability The Insert Card Reader is not intended for use in systems that may affect human life or that require a very high degree of reliability such as medical equipment, nuclear facilities, aerospace equipment or transportation equipment. Embed does not assume any liability for accidents resulting in injury or death, or for any damages to property that may occur as a result of using the product in such facilities, equipment, or control systems. Protecting against electrostatic discharge Electrostatic discharge can damage electronic components including the Embed Insert Card Reader. Please observe electrostatic discharge precautions for handling or installing this equipment. Power Supply Details Range In some markets the Insert Reader includes a recommended universal power supply requiring mains input of 100-240VAC, 50/60Hz, 0.5A. Other information and warnings:  Embed Insert Card Reader is intended for operation between 55 0 C and -20 O C (131 0 F and -4 O F).  Embed Insert Reader is not intended for domestic use. Acronym Description ICR Insert Card Reader USB Universal Serial Bus Wi-Fi Wireless Fidelity / IEEE 802.11b Direct Sequence AC Alternating Current DC Direct Current www.embedcard.com 4 3 Product Overview: The ICR is a facing device that features a touchscreen display and is capable of accepting both traditional magnetic and contactless type cards. Guests insert their card and interact with the touchscreen for the primary purpose of transacting at games and attractions. The device can be mounted in portrait or landscape orientations to best suited the game and guest accessibility. Communications with external hardware and servers is accomplished via a connector on the underside of the ICR which has provision for power and data via unshielded twisted pair/USB. www.embedcard.com 5 Recommended Installation Hardware The following is a recommended range of hardware to securely install and mount the ICR. The ICR uses 4mm brass inserts in the base of the enclosure so the appropriate length 4mm metric screws must be used to properly secure the ICR. All other hardware can be adjusted to what is most appropriate and available in your area. M4 metric, pan head, Philips drive, and zinc coated steel screws.  Used to secure the ICR to the surface of the game or attraction.  Recommended you have lengths of 10mm, 20mm and 25mm available as a minimum. M4 metric, zinc coated steel washers.  Recommended these are used under every screw. www.embedcard.com 6 4 Pre-Installation Before the installation of any hardware, verify the following:  An adequate earth connection point exists in the game cabinet.  If the mounting surface is metal, that it is adequately earthed.  The game credits when a coin is inserted  The game accurately dispenses tickets…

Text truncated - open the document above for the full version.

Embed International Pty Ltd Address: 2 Neil Street, Osborne Park, Perth, Western Australia 6017 Australia Tel: +61 8 9340 0100 Fax: +61 8 9340 0199 2014-11-08 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Confidentiality Request regarding application for certification of FCC ID: CKOICR001 We hereby request confidential treatment of information accompanying this application as outlined below: - Schematics Diagram - Block Diagram - Operation description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Client’s name / title : Mark Estate/N/A Contact information / address : 2 Neil Street, Osborne Park, Perth, Western Australia 6017 Australia Tel: +61 8 9340 0100 Fax: +61 8 9340 0199

Embed International Pty Ltd FCC ID: CKOICR001 POWER OF ATTORNEY 2014-11-03 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern: We, the undersigned, hereby authorize Shenzhen LCS Compliance Testing Laboratory Ltd. (MR. Gavin Liang, Manager) on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Shenzhen LCS Compliance Testing Laboratory Ltd. (MR. Gavin Liang, Manager) on our behalf shall have the same effect as acts of our own. This authorization expires on (2015-11-03). This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, (Embed International Pty Ltd), are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, ------------------------------- Client’s name / title : Mark Estate/N/A Contact information / address : 2 Neil Street, Osborne Park, Perth, Western Australia 6017 Australia Tel: +61 8 9340 0100 Fax: +61 8 9340 0199 Company Name: Embed International Pty Ltd

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID:CKOICR001 Report No.:LCS1410290934E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 1 of 3 1. EXTERIOR PHOTOGRAPHS OF EUT Fig.1 Fig.2 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID:CKOICR001 Report No.:LCS1410290934E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 2 of 3 Fig.3 Fig.4 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID:CKOICR001 Report No.:LCS1410290934E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 3 of 3 Fig.5 Fig.6

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD FCC ID:CKOICR001 Report No.:LCS1410290934E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 1 LABEL AND LOCATION Size:L:3.0cm*W:2.0cm Label And Location

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID:CKOICR001 Report No.:LCS1410290934E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 1 of 3 1. INTERIOR PHOTOGRAPHS OF EUT Fig.1 Fig.2 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID:CKOICR001 Report No.:LCS1410290934E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 2 of 3 Fig.3 Fig.4 Antenna SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID:CKOICR001 Report No.:LCS1410290934E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 3 of 3 Fig.5

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID:CKOICR001 Report No.: LCS1410290934E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 1 of 22 FCC TEST REPORT FOR Embed International Pty Ltd Insert Card Reader Color Glo Model No.: ICR-001 Prepared for : Embed International Pty Ltd Address : 2 Neil Street, Osborne Park, Perth, Western Australia 6017 Australia Prepared by : Shenzhen LCS Compliance Testing Laboratory Ltd. Address : 1/F., Xingyuan Industrial Park, Tongda Road, Bao'an Avenue, Bao'an District, Shenzhen, Guangdong, China Date of receipt of test sample : October 29, 2014 Number of tested samples : 1 Serial number : Prototype Date of Test : October 29, 2014 - November 13, 2014 Date of Report : November 13, 2014 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID:CKOICR001 Report No.: LCS1410290934E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 2 of 22 FCC TEST REPORT FCC CFR 47 PART 15 C(15.225): 2013 Report Reference No. ............... : LCS1410290934E Date of Issue ................................. : November 13, 2014 Testing Laboratory Name .......... : Shenzhen LCS Compliance Testing Laboratory Ltd. Address ......................................... : 1/F., Xingyuan Industrial Park, Tongda Road, Bao'an Avenue, Bao'an District, Shenzhen, Guangdong, China Testing Location/ Procedure ......... : Full application of Harmonised standards ■ Partial application of Harmonised standards □ Other standard testing method □ Applicant’s Name ....................... : Embed International Pty Ltd Address ......................................... : 2 Neil Street, Osborne Park, Perth, Western Australia 6017 Australia Test Specification Standard ........................................ : FCC CFR 47 PART 15 C(15.225): 2013 Test Report Form No. ................... : LCSEMC-1.0 TRF Originator ............................. : Shenzhen LCS Compliance Testing Laboratory Ltd. Master TRF ................................... : Dated 2011-03 Shenzhen LCS Compliance Testing Laboratory Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen LCS Compliance Testing Laboratory Ltd. is acknowledged as copyright owner and source of the material. Shenzhen LCS Compliance Testing Laboratory Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test Item Description. ................ : Insert Card Reader Color Glo Trade Mark ................................... : N/A Model/ Type reference .................. : ICR-001 Ratings .......................................... : DC12V,1A Result ......................................... : Positive Compiled by: Supervised by: Approved by: Jacky Li/ File administrators Danny Huang/ Technique principal Gavin Liang/ Manager SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID:CKOICR001 Report No.: LCS1410290934E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 3 of 22 FCC -- TEST REPORT Test Result Positive The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Test Report No. : LCS1410290934E November 13, 2014 Date of issue Type / Model........................... : ICR-001 EUT......................................... : Insert Card Reader Color Glo Applicant............................... : Embed International Pty Ltd Address.................................. : 2 Neil Street, Osborne Park, Perth, Western Australia 6017 Australia Telephone............................... : / Fax.......................................... : / Manufacturer........................ : Embed International Pty Ltd Address................................... : 2 Neil Street, Osborne Park, Perth, Western Australia 6017 Australia Telephone............................... : / Fax.......................................... : / Factory................................... : Embed International Pty Ltd Address................................... : 2 Neil Street, Osborne Park, Perth, Western Australia 6017 Australia Telephone............................... : / Fax.......................................... : / SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID:CKOICR001 Report No.: LCS1410290934E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 4 of 22 TABLE OF CONTENTS Description Page 1. GENERAL INFORMATION ..................................................................................................... 5 1.1 Description of Device (EUT) .............................................................................................................. 5 1.2 Support equipment List ........................................................................................................................ 5 1.3 External I/O Cable ................................................................................................................................ 5 1.4 Description of Test Facility .................................................................................................................. 5 1.5 Statement of The Measurement Uncertainty ........................................................................................ 6 1.6 Measurement Uncertainty..................................................................................................................... 6 1.7 Description Of Test Modes .................................................................................................................. 6 2. TEST METHODOLOGY ........…

Text truncated - open the document above for the full version.

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID:CKOICR001 Report No.:LCS1410290934E _______________________________________________________________________________________________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 1 of 2 1. TEST SETUP PHOTOGRAPHS 1.1. Photo of Radiated Emissions Measurement (X Position) Fig.1 Fig.2 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID:CKOICR001 Report No.:LCS1410290934E _______________________________________________________________________________________________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 2 of 2 Fig.3 1.2. Photo of Line Conducted Emissions Measurement