CKORAD000Network Adapter with 802.15.4 (Zigbee) operation

Embed Wireless U.S.A. Equipment Installation Guide Revised – 20 th April, 2012 www.embedcard.com Copyright © by Embed International Pty Ltd Notice of Rights All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of Embed. For more information on getting permission for reprints and excerpts, contact Embed. Notice of Liability The information in this document is distributed on an “as is” basis, without warranty. While every precaution has been taken in the preparation of this document, neither the author or Embed shall have any liability to any person or entity with respect to any loss or damage caused or alleged to be caused directly or indirectly by the instructions contained in this document or by the computer software or hardware products described herein. www.embedcard.com Asia-Pacific – Head Office Embed International Pty Ltd 2 Neil St. Osborne Park, WA 6017 Australia Telephone +61 (8) 9340 0100 Facsimile +61 (8) 9340 0199 Information: [email protected] Sales: [email protected] Support: [email protected] North & South America Embed USA LLC 1621 West Crosby Rd. Suite 100A Carrollton, TX 75006 USA Telephone (469) 521-8000 Facsimile (214) 260-0976 Information: [email protected] Sales: [email protected] Support: [email protected] Middle East Embed International Pty Ltd - Middle East Q3-197, PO Box: 122113 Sharjah Airport International Free (SAIF) Zone Sharjah, UAE Telephone +971 (6) 5579140 +971 (6) 5579141 Information: [email protected] Sales: [email protected] Support: [email protected] UK and Europe Embed Playsafe 14 The Maltings Brassmill Lane Bath BA1 3JL United Kingdom Telephone +44 (208) 242 4946 Information: [email protected] Sales: [email protected] Support: [email protected] Table of Contents Overview ................................................................................................................................................. 4 Do not use in life critical or applications requiring high reliability ......................................................... 4 Protecting against electrostatic discharge ............................................................................................ 4 Power Supply Details Range................................................................................................................. 4 Other information and warnings: ......................................................................................................... 4 Product Directory .................................................................................................................................... 5 Embed Wireless Device/Client ............................................................................................................. 5 Embed Wireless Coordinator/Server .................................................................................................... 5 Embed Wireless Client/Device Game Installation ..................................................................................... 6 Embed Wireless Server/Coordinator Game Installation ........................................................................... 7 FCC Compliance Statement ..................................................................................................................... 8 Waste Electrical and Electronic Equipment (WEEE) Statement................................................................. 9 DECLARATION OF CONFORMITY ............................................................................................. 10 Embed International PTY LTD 4 www.embedcard.com Overview This document outlines the process of installation and setup for the Embed Wireless hardware. Topics to be covered include Coordinator and Device installation, wiring details, and wireless settings. This guide assumes that the installer has basic electronic skills. Do not use in life critical or applications requiring high reliability The Embed Wireless system is not intended for use in systems that may affect human life or that require a very high degree of reliability such as medical equipment, nuclear facilities, aerospace equipment or transportation equipment. Embed does not assume any liability for accidents resulting in injury or death, or for any damages to property that may occur as a result of using the product in such facilities, equipment, or control systems. Protecting against electrostatic discharge Electrostatic discharge can damage electronic components including the Embed Wireless System. Please observe electrostatic discharge precautions for handling or installing this equipment. Power Supply Details Range The Embed Wireless should be operated with a power supply with a voltage between 9 – 15 V, which can supply at least 300 mA. Other information and warnings: • Embed Wireless is intended for operation between 55 0 C and -20 O C. • Embed Wireless is not intended for use at home. Embed International PTY LTD Product Directory Embed Wireless Device/Client The wireless client allows for a cable connection between Controller and Embed Wireless Coordinator/Server’s. Embed Wireless Coordinator/Server The wireless coordinator/Server enables for communications with Embed Wireless devices/clients and the Game Server. Embed International PTY LTD 5 Embed Wireless Device/Client: The wireless client allows for a cable-free ontroller and Embed Wireless Coordinator/Server’s. Embed Wireless Coordinator/Server: The wireless coordinator/Server enables for communications with Embed Wireless devices/clients and the Game Server. www.embedcard.com Embed International PTY LTD 6 www.embedcard.com Embed Wireless Client/Device Game Installation Step 1: Connect the RS485 patch cable to the wireless client J1. Step 2: Connect 12 V (minimum of 300 m.A.) to J1 on the Embed Wireless Client/Device. Step 3: Con…

Text truncated - open the document above for the full version.

2 Neil Street, Osborne Park WA 6017, Australia. Ph: +61 (0)8 9340 0100 Fax: +61 (0)8 9340 0199 Email: [email protected] Web: www.embedcard.com ACN: 120 351 359 ABN: 46 120 351 359 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: CKORAD000 To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely Schematic Diagram Block Diagram Theory of Operation (which includes the Product Brief) Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Mark Easte Managing Director Embed International Pty Ltd 13 April 2012

22 nd February 2012 2 Neil Street, Osborne Park WA 6017, Australia. Ph: +61 (0)8 9340 0100 Fax: +61 (0)8 9340 0199 Email: [email protected] Web: www.embedcard.com ACN: 120 351 359 ABN: 46 120 351 359 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 c.c. Compliance Certification Services Certification Division 47173 Benicia Street Fremont, CA 94538, USA To whom it may concern: I, the undersigned, hereby authorize Colin Gan, EMC Senior Engineer, of Austest Laboratories and hereafter referred to as Austest, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Colin Gan, EMC Senior Engineer, of Austest Laboratories on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing Austest as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; 22 nd February 2012 2 Neil Street, Osborne Park WA 6017, Australia. Ph: +61 (0)8 9340 0100 Fax: +61 (0)8 9340 0199 Email: [email protected] Web: www.embedcard.com ACN: 120 351 359 ABN: 46 120 351 359 e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Mark Easte, Managing Director Embed International Pty Ltd

FCC Part 15 Test Report No: 0405EMB_EI-WIR-180_FCC15tr FCC ID: CKORAD000 Page 43 of 50 Doc Id: TR-FCC15 (2012-01-30) This document shall not be reproduced in any form except in full. APPENDIX A – PHOTOGRAPHIC RECORD OF EUT EUT Overview EUT Bottom Ports FCC Part 15 Test Report No: 0405EMB_EI-WIR-180_FCC15tr FCC ID: CKORAD000 Page 44 of 50 Doc Id: TR-FCC15 (2012-01-30) This document shall not be reproduced in any form except in full. EUT Top Ports EUT Internal View & PCB (Component Side) FCC Part 15 Test Report No: 0405EMB_EI-WIR-180_FCC15tr FCC ID: CKORAD000 Page 46 of 50 Doc Id: TR-FCC15 (2012-01-30) This document shall not be reproduced in any form except in full. EUT External Antenna

FCC Part 15 Test Report No: 0405EMB_EI-WIR-180_FCC15tr FCC ID: CKORAD000 Page 47 of 50 Doc Id: TR-FCC15 (2012-01-30) This document shall not be reproduced in any form except in full. APPENDIX B – FCC LABEL & LOCATION FCC Label FCC Label Location on EUT

FCC Part 15 Test Report No: 0405EMB_EI-WIR-180_FCC15tr FCC ID: CKORAD000 Page 44 of 50 Doc Id: TR-FCC15 (2012-01-30) This document shall not be reproduced in any form except in full. EUT Top Ports EUT Internal View & PCB (Component Side) FCC Part 15 Test Report No: 0405EMB_EI-WIR-180_FCC15tr FCC ID: CKORAD000 Page 45 of 50 Doc Id: TR-FCC15 (2012-01-30) This document shall not be reproduced in any form except in full. EUT PCB (Trace Side) EUT PCB (RF Circuit with Internal Antenna Grounded (not used))

FCC Part 15 Test Report No: 0405EMB_EI-WIR-180_FCC15tr-a FCC ID: CKORAD000 Page 1 of 50 Doc Id: TR-FCC15 (2012-01-30) This document shall not be reproduced in any form except in full. COMPLIANCE TESTING REPORT FCC TITLE 47 PART 15 S UBPARTS A & B (CLASS B) & C Client: Embed International Address: 2 Neil Street, Osborne Park WA 6107, Australia Report Number: 0405EMB_EI-WIR-180_FCC15tr-a Date of Testing: 7 th to 11 th February 2012 File Number: EMB111122 Equipment Name: Network Adapter 2.4GHz Equipment Model Number: EI-WIR-180 or RAD-002 (refers to the same device) Equipment Serial Number: 00042545500051FA (Barcode) Equipment FCC ID: CKORAD000 Equipment Description: Embed Network Adapter employing 802.15.4 (Zigbee) operation Result: COMPLIES (Refer to Test Summary page for clarifications) Tested by: Richard Turner Approved by: Colin Gan Date of Issue: 20 Apr 2012 AUSTEST (NSW) FCC REGISTRATION NUMBER 90455 Results appearing herein relate only to the sample(s) tested. This report is issued errors and omissions exempt and is subject to withdrawal at Austest Laboratories discretion. FCC Part 15 Test Report No: 0405EMB_EI-WIR-180_FCC15tr-a FCC ID: CKORAD000 Page 2 of 50 Doc Id: TR-FCC15 (2012-01-30) This document shall not be reproduced in any form except in full. Table of Contents: 1 TEST SUMMARY .................................................................................................................... 4 2 MODIFICATIONS..................................................................................................................... 4 3 REFERENCES ........................................................................................................................ 5 4 EQUIPMENT UNDER TEST (EUT) DESCRIPTION ................................................................ 5 5 EUT TEST SETUP & CONFIGURATION ................................................................................ 6 5.1 Transmitter Test Channels ............................................................................................. 7 6 TEST SPECIFICATIONS ......................................................................................................... 8 6.1 Accreditations & Listings ................................................................................................. 8 6.2 Deviations from Standards and/or Accreditations ........................................................... 8 6.3 Test Facility ..................................................................................................................... 8 6.4 Test Equipment ............................................................................................................... 8 6.5 Measurement Uncertainties ............................................................................................ 9 7 FCC Part 15B, Section 15.107 - CONDUCTED LIMITS ........................................................ 10 7.1 EUT Test Operating Mode ............................................................................................ 10 7.2 Test Method .................................................................................................................. 10 7.3 Sample Calculation Example ........................................................................................ 11 7.4 Test Results .................................................................................................................. 11 8 FCC Part 15B, Section 15.109 - RADIATED EMISSION LIMITS .......................................... 13 8.1 EUT Operating Mode .................................................................................................... 13 8.2 Test Method .................................................................................................................. 13 8.3 Sample Calculation Example ........................................................................................ 14 8.4 Test Results .................................................................................................................. 14 9 FCC Part 15C, Section 15.203 – ANTENNA REQUIREMENT .............................................. 16 10 FCC Part 15C, Section 15.205 – RESTRICTED BANDS OF OPERATION .......................... 16 11 FCC Part 15C, Section 15.207 - CONDUCTED LIMITS ........................................................ 17 11.1 EUT Operating Mode .................................................................................................... 17 11.2 Test Method .................................................................................................................. 17 11.3 Sample Calculation Example ........................................................................................ 18 11.4 Test Results .................................................................................................................. 18 12 FCC Part 15C, Section 15.209 - RADIATED EMISSION LIMITS, GENERAL REQUIREMENTS .................................................................................................................. 20 12.1 EUT Operating Mode .................................................................................................... 20 12.2 Test Method .................................................................................................................. 20 12.3 Sample Calculation Example ........................................................................................ 21 12.4 Test Results .................................................................................................................. 21 12.4.1 BANDEDGE MEASUREMENTS: 3m Distance ............................................. 21 12.4.2 RADIATED DISTURBANCES: 150kHz to 30MHz, 3m Distance ................... 26 FCC Part 15 Test Report No: 0405EMB_EI-WIR-180_FCC15tr-a FCC ID: CKORAD000 Page 3 of 50 Doc Id: TR-FCC15 (2012-01-30) This document shall not be reproduced in any form except in full. 12.4.3 RADIATED DI…

Text truncated - open the document above for the full version.