CWTSBRT0700Remote Controller

Model Name : NSG-MR3U Model Name : NSG-MR3UModel Name : NSG-MR3U Model Name : NSG-MR3U Top View Bottom View Left Side Products Picture Products PictureProducts Picture Products Picture Rigth Side Upper Side Lower Side

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE,AND FCC ID : CWTSBRT0700 IC : 1788F-SBRT0700 Model: NSG-MR3U

● inside picture ● inside picture● inside picture● inside picture Model Name : NSG-MR3U Inside picture WLAN Transmitter RF4CE Transmitter ● Antenna position picture ● Antenna position picture● Antenna position picture● Antenna position picture Model Name : NSG-MR3U Model Name : NSG-MR3UModel Name : NSG-MR3UModel Name : NSG-MR3UAntenna position picture Antenna AntennaAntennaAntenna（ （（（RF RFRFRF4 444CE CECECE） ））） Antenna AntennaAntennaAntenna（ （（（WLAN WLANWLANWLAN） ）））

Picture of RF4CE Picture of RF4CEPicture of RF4CE Picture of RF4CE (UMEZ1-101) ●Top View ●Top View ●Top View ●Top View （ （（ （with Cover with Coverwith Cover with Cover) )) ) ●Top View ●Top View ●Top View ●Top View （ （（ （without Cover without Coverwithout Cover without Cover) )) ) ●Bottom View ●Bottom View ●Bottom View ●Bottom View （ （（ （without Cover without Coverwithout Cover without Cover) )) )

Side view Top Bottom

UL Japan, Inc. Head Office EMC Lab 4383-326 Asama-cho, Ise-shi, Mie 516-0021 Japan T:: +81.596.24.8116 / F:: +81.596.24.8124 / W:: ul.com/jp July 13, 2010 UL CCS 47173 Benicia Street, Fremont, CA 94538 FCC ID: CWTSBRT0700 To whom it may concern, We, UL Japan, Inc, hereby declare that Remote Controller, model: NSG-MR3U (FCC ID: CWTSBRT0700) of ALPS ELECTRIC CO., LTD. is exempt from RF exposure SAR evaluation as its output power(Zigbee part) meets the exclusion limits stated in FCC Part 2 §2.1093 and FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65. Thank you for your attention to this matter. Sincerely, Takahiro Hatakeda Leader of Head Office EMC Lab. WiSE Japan UL Verification Service UL Japan, Inc.

Test report No. : 30LE0087-HO-04-A Page : 19 of 61 FCC ID : CWTSBRT0700 Issued date : May 6, 2011 UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8116 Facsimile: +81 596 24 8124 APPENDIX 2 : SAR Measurement data Test report No. : 30LE0087-HO-04-A Page : 20 of 61 FCC ID : CWTSBRT0700 Issued date : May 6, 2011 UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8116 Facsimile: +81 596 24 8124 1. Evaluation procedure The evaluation was performed with the following procedure: Step 1: Measurement of the E-field at a fixed location above the ear point or central position of flat phantom was used as a reference value for assessing the power drop. Step 2: The SAR distribution at the exposed side of head or body position was measured at a distance of each device from the inner surface of the shell. The area covered the entire dimension of the antenna of EUT and the horizontal grid spacing was 15 mm x 15 mm . Based on these data, the area of the maximum absorption was determined by spline interpolation. Step 3: Around this point found in the Step 2 (area scan) , a volume of 30mm x 30mm x 30mm was assessed by measuring 7 x 7 x 7 points. And for any secondary peaks found in the Step2 which are within 2dB of maximum peak and not with this Step3 (Zoom scan) is repeated. On the basis of this data set, the spatial peak SAR value was evaluated under the following procedure: (1). The data at the surface were extrapolated, since the center of the dipoles is 1mm(EX3DV3) away from the tip of the probe and the distance between the surface and the lowest measuring point is 1 mm or 3mm. The extrapolation was based on a least square algorithm [4]. A polynomial of the fourth order was calculated through the points in z-axes. This polynomial was then used to evaluate the points between the surface and the probe tip. (2). The maximum interpolated value was searched with a straightforward algorithm. Around this maximum the SAR values averaged over the spatial volumes (1 g or 10 g) were computed by the 3D-Spline interpolation algorithm. The 3D-Spline is composed of three one-dimensional splines with the “Not a knot"-condition (in x, y and z-directions) [4], [5]. The volume was integrated with the trapezoidal-algorithm. One thousand points (10 x 10 x 10) were interpolated to calculate the average. (3). All neighboring volumes were evaluated until no neighboring volume with a higher average value was found. Step 4: Re-measurement of the E-field at the same location as in Step 1. Test report No. : 30LE0087-HO-04-A Page : 21 of 61 FCC ID : CWTSBRT0700 Issued date : May 6, 2011 UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8116 Facsimile: +81 596 24 8124 2. Measurement data NSG-MR3U Body SAR Top edge WLAN 11b 1Mbps 2437MHz Communication System: WLAN 11a/b/g/n ; Communication System Band: WLAN 11b/g/n; Frequency: 2450 MHz;Duty Cycle: 1:1 Medium parameters used: f = 2450 MHz; σ = 1.95 mho/m; ε r = 51.4; ρ = 1000 kg/m 3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007) DASY5 Configuration: Probe: EX3DV3 - SN3507; ConvF(7.61, 7.61, 7.61); Calibrated: 2011/03/16 Sensor-Surface: 2mm (Mechanical Surface Detection) Electronics: DAE3 Sn509; Calibrated: 2010/07/07 Phantom: ELI 4.0; Type: QDOVA001BA; Serial: xxxx Measurement SW: DASY52, Version 52.2 (0); SEMCAD X Version 14.4.2 (2595) Area Scan (51x91x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.065 mW/g Zoom Scan (7x7x7) 2 (7x8x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 4.357 V/m; Power Drift = -0.17 dB Peak SAR (extrapolated) = 0.105 W/kg SAR(1 g) = 0.045 mW/g; SAR(10 g) = 0.019 mW/g Maximum value of SAR (measured) = 0.071 mW/g Test Date = 04/26/2011 Ambient Temperature = 24.5 degree.c Liquid Temperature = Before 23.5 degree.C , After 23.5 degree.C Test report No. : 30LE0087-HO-04-A Page : 22 of 61 FCC ID : CWTSBRT0700 Issued date : May 6, 2011 UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8116 Facsimile: +81 596 24 8124 Test report No. : 30LE0087-HO-04-A Page : 23 of 61 FCC ID : CWTSBRT0700 Issued date : May 6, 2011 UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8116 Facsimile: +81 596 24 8124 NSG-MR3U Body SAR Bottom edge WLAN 11b 1Mbps 2437MHz Communication System: WLAN 11a/b/g/n ; Communication System Band: WLAN 11b/g/n; Frequency: 2450 MHz;Duty Cycle: 1:1 Medium parameters used: f = 2450 MHz; σ = 1.95 mho/m; ε r = 51.4; ρ = 1000 kg/m 3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007) DASY5 Configuration: Probe: EX3DV3 - SN3507; ConvF(7.61, 7.61, 7.61); Calibrated: 2011/03/16 Sensor-Surface: 2mm (Mechanical Surface Detection), Sensor-Surface: 4mm (Mechanical Surface Detection) Electronics: DAE3 Sn509; Calibrated: 2010/07/07 Phantom: ELI 4.0; Type: QDOVA001BA; Serial: xxxx Measurement SW: DASY52, Version 52.6 (1); SEMCAD X Version 14.4.2 (2595) Area Scan (51x91x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.00437 mW/g Zoom Scan (7x7x7) 2 (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 0 V/m; Power Drift = 0 dB Peak SAR (extrapolated) = 0.00749 W/kg SAR(1 g) = 0.00247 mW/g; SAR(10 g) = 0.00124 mW/g Maximum value of SAR (measured) = 0.003 mW/g Test Date = 04/26/2011 Ambient Temperature = 24.5 degree.c Liquid Temperature = Before 23.5 degree.C , After 23.5 degree.C Test report No. : 30LE0087-HO-04-A Page : 24 of 61 FCC ID : CWTSBRT0700 Issued date : May 6, 2011 UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8116 Facsimile: +81 596 24 8124 NSG-MR3U Body SAR Left edge WLAN 11b 1Mbps 2437MHz Communication System: WLAN 11a/b/g/n…

Text truncated - open the document above for the full version.

Test report No. : 30LE0087-HO-04-A Page : 2 of 61 FCC ID : CWTSBRT0700 Issued date : May 6, 2011 UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone: +81 596 24 8116 Facsimile: +81 596 24 8124 SECTION 1: Customer information ................................................................................................................................................................... 3 SECTION 2: Equipment under test (E.U.T.) ..................................................................................................................................................... 3 2.1 Identification of E.U.T. ....................................................................................................................................... 3 2.2 Product Description ............................................................................................................................................ 3 SECTION 3 : Test standard information ........................................................................................................................................................... 4 3.1 Requirements for compliance testing defined by the FCC ................................................................................. 4 3.2 Procedure and result ........................................................................................................................................... 5 3.3 Exposure limit .................................................................................................................................................... 5 3.4 Test Location ...................................................................................................................................................... 5 SECTION4 Description of the operating mode ..................................................................................................................................................... 6 4.1 Operating modes ................................................................................................................................................. 6 4.2 Confirmation before SAR testing ....................................................................................................................... 7 4.3 Confirmation after SAR testing .......................................................................................................................... 7 SECTION 5 Description of the Body setup ........................................................................................................................................................ 8 5.1 Test position ....................................................................................................................................................... 8 SECTION 6 : Measurement results ..................................................................................................................................................................... 9 6.1 Body WLAN SAR .............................................................................................................................................. 9 SECTION 7 : Test surrounding ........................................................................................................................................................................... 10 7.1 Measurement uncertainty ................................................................................................................................... 10 APPENDIX 1 : Photographs of test setup ............................................................................................................................ 11 1. Photo of EUT ...................................................................................................................................................... 12 2. Setup photo ......................................................................................................................................................... 13 APPENDIX 2 : SAR Measurement data .............................................................................................................................. 19 1. Evaluation procedure .......................................................................................................................................... 20 2. Measurement data ............................................................................................................................................... 21 APPENDIX 3 : Test instruments .......................................................................................................................................... 28 1. Equipment used ................................................................................................................................................... 29 2. Dosimetry assessment setup ................................................................................................................................ 30 3. Configuration and peripherals ............................................................................................................................. 31 4. System components ............................................................................................................................................. 32 5. Test system specifications ................................................................................................................................... 35 6. 2450MHz Simulated Tissues Composition ......................................................................................................... 37 7. 2450MHz Validation Measurement .................................................................................................................... 37 8. Body 2450MHz System validation data ..................................................................…

Text truncated - open the document above for the full version.

Test report No. : 30LE0087-HO-02-A Page : 2 of 35 Issued date : July 13, 2011 FCC ID : CWTSBRT0700 UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 CONTENTS PAGE SECTION 1: Customer information ......................................................................................................... 3 SECTION 2: Equipment under test (E.U.T.) ........................................................................................... 3 SECTION 3: Test specification, procedures & results ............................................................................ 4 SECTION 4: Operation of E.U.T. during testing .................................................................................... 7 SECTION 5: Radiated Spurious Emission .............................................................................................. 8 SECTION 6: Antenna Terminal Conducted Tests .................................................................................. 9 APPENDIX 1: Photographs of test setup ............................................................................................... 10 Radiated Spurious Emission ............................................................................................................. 10 Worst Case Position .......................................................................................................................... 11 APPENDIX 2: Data of EMI test .............................................................................................................. 12 6dB Bandwidth ................................................................................................................................. 12 Maximum Peak Output Power .......................................................................................................... 14 Radiated Spurious Emission ............................................................................................................. 15 Conducted Spurious Emission .......................................................................................................... 24 Conducted Emission Band Edge compliance ................................................................................... 30 Conducted Spurious Emission(below 30MHz) ................................................................................. 31 Power Density ................................................................................................................................... 32 99%Occupied Bandwidth ................................................................................................................. 34 APPENDIX 3: Test instruments ............................................................................................................. 35 Test report No. : 30LE0087-HO-02-A Page : 3 of 35 Issued date : July 13, 2011 FCC ID : CWTSBRT0700 UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 SECTION 1: Customer information Company Name : ALPS Electric Co., Ltd. Address : 6-3-36, FURUKAWANAKAZATO,OSAKI-SHI, MIYAGI 989-6181 JAPAN Telephone Number : +81-229-23-6896 Facsimile Number : +81-229-24-6334 Contact Person : Yuji Ouchi SECTION 2: Equipment under test (E.U.T.) 2.1 Identification of E.U.T. Type of Equipment : Remote Controller Model No. : NSG-MR3U Serial No. : Refer to Section 4, Clause 4.2 Rating : DC3.0V Receipt Date of Sample : December 6, 2010 Country of Mass-production : China Condition of EUT : Engineering prototype (Not for Sale: This sample is equivalent to mass-produced items.) Modification of EUT : No Modification by the test lab 2.2 Product Description General Specification Clock frequency(ies) in the system : Remote Controller: 8MHz, RF4CE module: 32MHz, WLAN: 40MHz Radio Specification WLAN11b/g Radio Type : Transceiver Frequency of Operation : 2412-2462MHz Modulation : DSSS, OFDM Power Supply (radio part input) : DC 3.3V Antenna type : Planar Invented F Antenna Antenna Gain : -1.2dBi Zigbee (RF4CE) Radio Type : Transceiver Frequency of Operation : 2425-2475MHz Modulation : DSSS Power Supply (radio part input) : DC 2.8V Antenna type : lambda/4 Metal Antenna Antenna Gain : 1.1dBi *For Zigbee (RF4CE) part, please see Test Report No. 30LE0087-HO-02-B of UL Japan, Inc. Test report No. : 30LE0087-HO-02-A Page : 4 of 35 Issued date : July 13, 2011 FCC ID : CWTSBRT0700 UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 SECTION 3: Test specification, procedures & results 3.1 Test Specification Test Specification : FCC Part 15 Subpart C: 2010, final revised on December 6, 2010 and effective January 5, 2011 Title : FCC 47CFR Part15 Radio Frequency Device Subpart C Intentional Radiators Section 15.207 Conducted limits Section 15.247 Operation within the bands 902-928MHz, 2400-2483.5MHz, and 5725-5850MHz *The revision on December 6, 2010 does not affect the test specification applied to the EUT. * The EUT complies with FCC Part 15 Subpart B: 2009,final revised on December 6, 2010 and effective January 5, 2011. 3.2 Procedures and results Item Test Procedure Specification Worst margin Results Remarks Conducted Emission FCC: ANSI C63.4:2003 7. AC powerline Conducted Emission measurements FCC: Section 15.207 N/A N/A *1) - IC: RSS-Gen 7.2.4 IC: RSS-Gen 7.2.4 6dB Bandwidth FCC: "Guidance on Measurement of Digital Transmission Systems Operating under Section15.247" FCC: Section 15.247(a)(2) See data. Complied Conducted IC: RSS-Gen 4.6.2 IC: RSS-210 A8.2(a) Maximum Peak Output Power FCC: "Guidance on Measurement of Digital Transmission Systems Operating under Section15.247" FCC: Section 15.247(b)(3) Complied Conducted IC: RSS-Gen 4.8 IC: RSS-210 A8.4(4) Power Density FCC: "Guidance on Measurement of Digital Transmission Systems Operatin…

Text truncated - open the document above for the full version.

Test report No. : 30LE0087-HO-02-A Page : 12 of 35 Issued date : July 13, 2011 FCC ID : CWTSBRT0700 UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 APPENDIX 2: Data of EMI test 6dB Bandwidth Test place Head Office EMC Lab. No.6 Measurement Room Report No. 30LE0087-HO-02 Date 12/08/2010 Temperature/ Humidity 23 deg.C / 30% RH Engineer Takeshi Choda Mode Tx 11b Frequency 6dB Bandwidth Limit [MHz] [MHz] [kHz] 2412 13.047 >500 2437 13.042 >500 2462 13.050 >500 11g Frequency 6dB Bandwidth Limit [MHz] [MHz] [kHz] 2412 16.526 >500 2437 16.504 >500 2462 16.463 >500 Test report No. : 30LE0087-HO-02-A Page : 13 of 35 Issued date : July 13, 2011 FCC ID : CWTSBRT0700 UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 6dB Bandwidth 11b 11g 2412MHz 2412MHz 2437MHz 2437MHz 2462MHz 2462MHz Test report No. : 30LE0087-HO-02-A Page : 14 of 35 Issued date : July 13, 2011 FCC ID : CWTSBRT0700 UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 Maximum Peak Output Power Test place Head Office EMC Lab. No.6 Measurement Room Report No. 30LE0087-HO-02 Date 12/08/2010 Temperature/ Humidity 23 deg.C / 30% RH Engineer Takeshi Choda Mode 11b / 11g Tx IEEE 802.11b Freq.ReadingCableAtten.Margin Loss [MHz][dBm][dB][dB][dBm][mW][dBm][mW][dB] 24123.030.3010.0013.3321.5330.00100016.67 24373.250.3010.0013.5522.6530.00100016.45 24623.910.3010.0014.2126.3630.00100015.79 Sample Calculation: Result = Reading + Cable Loss (including the cable(s) customer supplied) + Attenuator Tx 2437MHz RateReading Remar k [Mbps][dBm] 13.25* 23.22 5.52.97 113.14 *: Worst Rate All comparizon were carried out on same frequency and measurement factors. ResultLimit IEEE 802.11g Freq.ReadingCableAtten.Margin Loss [MHz][dBm][dB][dB][dBm][mW][dBm][mW][dB] 24128.710.3010.0019.0179.6230.00100010.99 24377.710.3010.0018.0163.2430.00100011.99 24628.140.3010.0018.4469.8230.00100011.56 Sample Calculation: Result = Reading + Cable Loss (including the cable(s) customer supplied) + Attenuator Tx 2437MHz RateReading Remar k [Mbps][dBm] 67.71* 97.50 127.34 187.22 247.16 367.36 487.28 547.22 *: Worst Rate All comparisons were carried out on same frequency and measurement factors. ResultLimit Test report No. : 30LE0087-HO-02-A Page : 15 of 35 Issued date : July 13, 2011 FCC ID : CWTSBRT0700 UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 Radiated Spurious Emission Test place Head Office EMC Lab. No.3 and 4 Semi Anechoic Chamber Report No. 30LE0087-HO-02 Date 12/24/2010 01/05/2011 01/06/2011 Temperature/ Humidity 23 deg.C / 68% RH 22 deg.C / 38% RH 20 deg.C / 38% RH Engineer Takeshi Choda Takumi Shimada Takumi Shimada (1-10GHz) (10-26.5GHz) (30-1000MHz) Mode 11b Tx 2412MHz PolarityFrequencyDetector Reading Ant.Fac.LossGainResultLimitMarginRemark [MHz][dBuV][dB/m][dB][dB][dBuV/m] [dBuV/m][dB] Hori180.000 QP30.815.88.932.123.443.520.1 Hori340.002 QP34.816.210.231.829.446.016.6 Hori360.001 QP36.716.610.331.831.846.014.2 Hori400.001 QP33.117.410.631.929.246.016.8 Hori440.002 QP30.017.710.831.926.646.019.4 Hori800.002 QP27.521.812.831.430.746.015.3 Hori2273.000 PK45.627.23.032.243.673.930.3 Hori2390.000 PK49.627.23.032.147.773.926.2 Hori2397.500 PK61.327.23.132.159.5-- See 20dBc Data Sheet Hori2400.000 PK57.427.23.132.155.6-- See 20dBc Data Sheet Hori2570.000 PK51.927.33.132.050.373.923.6 Hori4824.000 PK43.930.95.831.449.273.924.7 Hori7236.000 PK41.735.86.332.351.573.922.4NS Hori9648.000 PK43.037.87.233.055.073.918.9NS Hori24120.000 PK47.237.9-0.931.652.673.921.3 Hori2273.000 AV35.827.23.032.233.853.920.1 Hori2390.000 AV40.527.23.032.138.653.915.3 Hori2397.500 AV57.127.23.132.155.3-- See 20dBc Data Sheet Hori2400.000 AV50.127.23.132.148.3-- See 20dBc Data Sheet Hori2570.000 AV45.227.33.132.043.653.910.3 Hori4824.000 AV33.230.95.831.438.553.915.4 Hori7236.000 AV30.035.86.332.339.853.914.1NS Hori9648.000 AV30.037.87.233.042.053.911.9NS Hori24120.000 AV33.437.9-0.931.638.853.915.1 Vert180.000 QP24.715.88.932.117.343.526.2 Vert340.002 QP32.416.210.231.827.046.019.0 Vert360.001 QP34.616.610.331.829.746.016.3 Vert400.001 QP33.417.410.631.929.546.016.5 Vert440.002 QP31.317.710.831.927.946.018.1 Vert800.003 QP27.121.812.831.430.346.015.7 Vert2273.000 PK44.827.23.032.242.873.931.1 Vert2390.000 PK45.327.23.032.143.473.930.5 Vert2397.500 PK56.227.23.132.154.4-- See 20dBc Data Sheet Vert2400.000 PK53.527.23.132.151.7-- See 20dBc Data Sheet Vert2570.000 PK47.327.33.132.045.773.928.2 Vert4824.000 PK42.730.95.831.448.073.925.9 Vert7236.000 PK42.135.86.332.351.973.922.0NS Vert9648.000 PK42.437.87.233.054.473.919.5NS Vert24120.000 PK47.837.9-0.931.653.273.920.7 Vert2273.000 AV34.127.23.032.232.153.921.8 Vert2390.000 AV33.327.23.032.131.453.922.5 Vert2397.500 AV50.827.23.132.149.0-- See 20dBc Data Sheet Vert2400.000 AV44.327.23.132.142.5-- See 20dBc Data Sheet Vert2570.000 AV37.827.33.132.036.253.917.7 Vert4824.000 AV31.230.95.831.436.553.917.4 Vert7236.000 AV30.135.86.332.339.953.914.0NS Vert9648.000 AV30.337.87.233.042.353.911.6NS Vert24120.000 AV33.437.9-0.931.638.853.915.1 Result = Reading + Ant Factor + Loss (Cable+Attenuator+Filter-Distance factor(above 10GHz)) - Gain(Amplifier) *Other frequency noises omitted in this report were not seen or had enough margin (more than 20dB). *The 10th harmonic was not seen so the result was its base noise level. Distance factor:10GHz-26.5GHz20log(3.0m/1.0m)= 9.5dB 26.5GHz-40GHz20log(3.0m/0.5m)=15.6dB Test report No. : 30LE0087-HO-02-A Page : 16 of 35 Issued date : July 13, 2011 FCC ID : CWTSBRT0700 UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 Radiated Spurious Emission Test place…

Text truncated - open the document above for the full version.

Test report No. : 30LE0087-HO-02-B Page : 2 of 27 Issued date : July 13, 2011 FCC ID : CWTSBRT0700 UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 CONTENTS PAGE SECTION 1: Customer information ......................................................................................................... 3 SECTION 2: Equipment under test (E.U.T.) ........................................................................................... 3 SECTION 3: Test specification, procedures & results ............................................................................ 4 SECTION 4: Operation of E.U.T. during testing .................................................................................... 7 SECTION 5: Radiated Spurious Emission .............................................................................................. 8 SECTION 6: Antenna Terminal Conducted Tests .................................................................................. 9 APPENDIX 1: Photographs of test setup ............................................................................................... 10 Radiated Spurious Emission ............................................................................................................. 10 Worst Case Position (Horizontal: Y-axis/ Vertical:Y-axis) .............................................................. 11 APPENDIX 2: Data of EMI test .............................................................................................................. 12 6dB Bandwidth ................................................................................................................................. 12 Maximum Peak Output Power .......................................................................................................... 14 Radiated Spurious Emission ............................................................................................................. 15 Conducted Spurious Emission .......................................................................................................... 19 Conducted Emission Band Edge compliance ................................................................................... 22 Conducted Spurious Emission(below 30MHz) ................................................................................. 23 Power Density ................................................................................................................................... 24 99%Occupied Bandwidth ................................................................................................................. 26 APPENDIX 3: Test instruments ............................................................................................................. 27 Test report No. : 30LE0087-HO-02-B Page : 3 of 27 Issued date : July 13, 2011 FCC ID : CWTSBRT0700 UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 SECTION 1: Customer information Company Name : ALPS Electric Co., Ltd. Address : 6-3-36, FURUKAWANAKAZATO,OSAKI-SHI, MIYAGI 989-6181 JAPAN Telephone Number : +81-229-23-6896 Facsimile Number : +81-229-24-6334 Contact Person : Yuji Ouchi SECTION 2: Equipment under test (E.U.T.) 2.1 Identification of E.U.T. Type of Equipment : Remote Controller Model No. : NSG-MR3U Serial No. : Refer to Section 4, Clause 4.2 Rating : DC3.0V Receipt Date of Sample : December 6, 2010 Country of Mass-production : China Condition of EUT : Engineering prototype (Not for Sale: This sample is equivalent to mass-produced items.) Modification of EUT : No Modification by the test lab 2.2 Product Description General Specification Clock frequency(ies) in the sy…

Text truncated - open the document above for the full version.