DBZHHA79Wireless Microphone Transmitter

Rio Rancho, NM, USA www.lectrosonics.com INSTRUCTION MANUAL HHa Handheld Transmitter HHa, HHa-941, HHa/EO1, HHa/E02, HHa/E06, HHa/E07-941, HHa/X Fill in for your records: Serial Number: Purchase Date: Digital Hybrid Wireless ® US Patent 7,225,135 For FCC Part 74 licensed operators HHa LECTROSONICS, INC. 2 , HHa-941, HHa/E01, HHa/E02, HHa/E06, HHa/E07-941, HHa/X Industry Canada Compliance: This device operates on a no-protection no-interference basis. Should the user seek to obtain protection from other radio services operating in the same TV bands, a radio license is required. Please consult Industry Canada’s document CPC-2-1-28, Optional Licensing for Low-Power Radio Apparatus in the TV Bands, for details. This device complies with Industry Canada license-exempt RSS standard(s). Op- eration is subject to the following two conditions: 1. This device may not cause harmful interference; 2. This device must accept any interference received, including interference that may cause undesired operation of the device. Cet appareil est conforme à Industrie Canada une licence standard RSS exonérés (s). Son fonctionnement est soumis aux deux conditions suivantes: 1. Cet appareil ne doit pas provoquer d’interférences 2. Cet appareil doit accepter toute interférence reçue, y compris les interférences pouvant provoquer un fonctionnement indésirable de l’appareil Wideband Hand Held Transmitter Rio Rancho, NM 3 Table of Contents Digital Hybrid Wireless ® ....................................................................................................................................................................................................................................................................................................1 General Technical Description ..............................................................................................................................................................4 Digital Hybrid Wireless ® Technology ....................................................................................................................................................4 Microphone Capsules: ...........................................................................................................................................................................6 Mechanical Assembly ............................................................................................................................................................................6 Battery Installation .................................................................................................................................................................................7 IR Sync ....................................................................................................................................................................................................7 Control Panel ..........................................................................................................................................................................................7 Setup and Adjustments .........................................................................................................................................................................7 Powering On .........................................................................................................................................................................................7 Powering Off .........................................................................................................................................................................................8 Standby Mode .......................................................................................................................................................................................8 Power Menu ..........................................................................................................................................................................................8 Battery Condition ..................................................................................................................................................................................8 Navigating Menus and Screens ............................................................................................................................................................8 Input Gain Adjustment .........................................................................................................................................................................10 Programmable Switch Functions ........................................................................................................................................................11 Mic Capsule Adjustments ....................................................................................................................................................................12 (EXPERT LEVEL ADJUSTMENT) ......................................................................................................................................................12 Parts and Accessories .........................................................................................................................................................................13 Firmware Update ..................................................................................................................................................................................14 Troubleshooting ....................................................................................................................................................................................16 Specifications ...............................................................................................................................................…

Text truncated - open the document above for the full version.

Lectrosonics, Inc. FCC ID: DBZHHA79, IC: 8024A-HHA79 EUT External Photographs 1.1. EUT Top View 1.2. EUT Bottom View Antenna Lectrosonics, Inc. FCC ID: DBZHHA79, IC: 8024A-HHA79 1.3. EUT Side View #1 1.4. EUT Side View #2 Lectrosonics, Inc. FCC ID: DBZHHA79, IC: 8024A-HHA79 1.5. EUT Side View #3 1.6. EUT Side View #4 Lectrosonics, Inc. FCC ID: DBZHHA79, IC: 8024A-HHA79 1.7. Modified EUT SMA Connector at the antenna port Audio input port

Model HHA/E07-941 SN XXXXX Lectrosonics, Inc. Made in USA FCC ID: DBZHHA79 IC: 8024A-HHA79 Model HHA/E07-941 SN XXXXX Lectrosonics, Inc. Made in USA FCC ID: DBZHHA79 IC: 8024A-HHA79 HHA/E07-941 hand held transmitter FCC and IC labeling - Label is in the battery compartment 21 January 2020 BAH created labling per Paul, using HHA as a base example. Lectrosonics, Inc. Rio Rancho, NM USA T (505) 892.4501 F (505) 892-6243 Contact engineer: Bob Cunnings - [email protected] Contact artwork: Bridget Harrington - [email protected] ACTUAL SIZE Label in battery compartment

Lectrosonics, Inc. FCC ID: DBZHHA79, IC: 8024A-HHA79 EUT Internal Photographs 1.1 EUT Open Case View 1.2 EUT PCB#1 Top View Lectrosonics, Inc. FCC ID: DBZHHA79, IC: 8024A-HHA79 1.3 EUT PCB#1 Bottom View 1.4 EUT PCB#2 Top View 1.5 EUT PCB#2 Bottom View Lectrosonics, Inc. FCC ID: DBZHHA79, IC: 8024A-HHA79 1.6 EUT PCB#3 Top View 1.7 EUT PCB#3 Bottom View Lectrosonics, Inc. FCC ID: DBZHHA79, IC: 8024A-HHA79 1.8 EUT Battery View

Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. (Dongguan). This report must not be used by the customer to claim product certification, approval, or endorsement by A2LA* or any agency of the Federal Government. * This report may contain data that are not covered by the A2LA accreditation and are marked with an asterisk “*”. SAR EVALUATION REPORT For Lectrosonics, Inc. 581 Laser Rd NE Rio Rancho NM 87124, USA FCC ID: DBZHHA79 IC: 8024A-HHA79 Report Type: Original Report Product Type: wireless microphone transmitter Report Number: R1911012-20 Report Date: 2019-12-18 Reviewed By: Rocky Xiao RF Engineer Prepared By: Bay Area Compliance Laboratories Corp. (Dongguan) No.69 Pulongcun, Puxinhu Industry Area, Tangxia, Dongguan, Guangdong, China Tel: +86-769-86858888 Fax: +86-769-86858891 www.baclcorp.com.cn Bay Area Compliance Laboratories Corp. ( Dongguan) Report No.: R1911012- 20 SAR Evaluation Report 2 of 34 Attestation of Test Results EUT Information EUT Description wireless microphone transmitter Tested Model HHA/E07-941 FCC ID DBZHHA79 IC 8024A-HHA79 Serial Number 3 Test Date 2019-11-14 MODE Max. SAR Level(s) Reported(W/kg) Limit (W/kg) FM (941.525-959.825 MHz) 10g Extremity SAR1.02 4.0 Applicable Standards FCC 47 CFR part 2.1093 Radiofrequency radiation exposure evaluation: portable devices RSS-102 Issue 5 March 2015 Radio Frequency (RF) Exposure Compliance of Radio communication Apparatus (All Frequency Bands). RF Exposure Procedures: TCB Workshop April 2019 IEEE1528:2013 IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques IEC 62209-2:2010 Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices-Human models, instrumentation, and procedures-Part 2: Procedure to determine the specific absorption rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz) KDB procedures KDB 447498 D01 General RF Exposure Guidance v06 KDB 865664 D01 SAR Measurement 100 MHz to 6 GHz v01r04 KDB 865664 D02 RF Exposure Reporting v01r02 Note: This wireless device has been shown to be capable of compliance for localized specific absorption rate (SAR) for General Population/Uncontrolled Exposure limits specified in FCC 47 CFR part 2.1093/ RSS-102 Issue 5 March 2015 and has been tested in accordance with the measurement procedures specified in IEEE 1528-2013 and RF exposure KDB procedures. The results and statements contained in this report pertain only to the device(s) evaluated. Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: R1911012-20 SAR Evaluation Report 3 of 34 TABLE OF CONTENTS DOCUMENT REVISION HISTORY ......................................................................................................................... 4 EUT DESCRIPTION .................................................................................................................................................... 5 TECHNICAL SPECIFICATION ......................................................................................................................................... 5 REFERENCE, STANDARDS, AND GUIDELINES .................................................................................................. 6 SAR LIMITS ................................................................................................................................................................. 7 FACILITIES .................................................................................................................................................................. 8 DESCRIPTION OF TEST SYSTEM .......................................................................................................................... 9 EQUIPMENT LIST AND CALIBRATION ............................................................................................................. 15 EQUIPMENTS LIST & CALIBRATION INFORMATION .................................................................................................... 15 SAR MEASUREMENT SYSTEM VERIFICATION .............................................................................................. 16 LIQUID VERIFICATION ............................................................................................................................................... 16 SYSTEM ACCURACY VERIFICATION ........................................................................................................................... 17 SAR SYSTEM VALIDATION DATA ..................................................................................................................... 18 EUT TEST STRATEGY AND METHODOLOGY ................................................................................................. 19 TEST POSITIONS FOR DEVICE OPERATING NEXT TO A PERSON’S EAR........................................................................ 19 CHEEK/TOUCH POSITION ........................................................................................................................................... 20 EAR/TILT POSITION ................................................................................................................................................... 20 TEST POSITIONS FOR BODY-WORN AND OTHER CONFIGURATIONS .............................................................................. 21 TEST DISTANCE FOR SAR EVALUATION .................................................................................................................... 21 SAR EVALUATION PROCEDURE ................................................................................................................................. 22 CONDUCTED O…

Text truncated - open the document above for the full version.

APPENDIX C PROBE CALIBRATION CERTIFICATES DIPOLE CALIBRATION CERTIFICATES

Report No.: R1911012- 20 Page 1 of 6 Test Plot 1#: 950.675 MHz_Handheld Front DUT: UHF Plug-on Transmitter; Type: HHA/E07-941 ; Serial: 3 Communication System: FM; Frequency: 950.675 MHz;Duty Cycle: 1:1 Medium parameters used: f = 950.675 MHz; σ = 0.988 S/m; ε r = 39.894; ρ = 1000 kg/m 3 •Probe: EX3DV4 - SN7441; ConvF(9.69, 9.69, 9.69) @ 950.675 MHz; Calibrated: 2018/12/13 Phantom section: Flat Section DASY5 Configuration: •Sensor-Surface: 1.4mm (Mechanical Surface Detection) •Electronics: DAE3 Sn471; Calibrated: 2018/12/3 •Phantom: SAM (30deg probe tilt) with CRP v5.0_20150321; Type: QD000P40CD; Serial: TP:1874 •Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (61x151x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 2.42 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 13.34 V/m; Power Drift = -0.02 dB Peak SAR (extrapolated) = 5.04 W/kg SAR(1 g) = 1.94 W/kg; SAR(10 g) = 0.945 W/kg Maximum value of SAR (measured) = 3.83 W/kg 0 dB = 3.83 W/kg = 5.83 dBW/kg Report No.: R1911012- 20 Page 2 of 6 Test Plot 2#: 950.675MHz_Handheld Rear DUT: UHF Plug-on Transmitter; Type: HHA/E07-941 ; Serial: 3 Communication System: FM; Frequency: 950.675 MHz;Duty Cycle: 1:1 Medium parameters used: f = 950.675 MHz; σ = 0.988 S/m; ε r = 39.894; ρ = 1000 kg/m 3 •Probe: EX3DV4 - SN7441; ConvF(9.69, 9.69, 9.69) @ 950.675 MHz; Calibrated: 2018/12/13 Phantom section: Flat Section DASY5 Configuration: •Sensor-Surface: 1.4mm (Mechanical Surface Detection) •Electronics: DAE3 Sn471; Calibrated: 2018/12/3 •Phantom: SAM (30deg probe tilt) with CRP v5.0_20150321; Type: QD000P40CD; Serial: TP:1874 •Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (61x151x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 1.84 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 10.45 V/m; Power Drift = -0.18 dB Peak SAR (extrapolated) = 4.08 W/kg SAR(1 g) = 1.47 W/kg; SAR(10 g) = 0.690 W/kg Maximum value of SAR (measured) = 3.00 W/kg 0 dB = 3.00 W/kg = 4.77 dBW/kg Report No.: R1911012- 20 Page 3 of 6 Test Plot 3#: 941.525 MHz_Handheld Left DUT: UHF Plug-on Transmitter; Type: HHA/E07-941; Serial: 3 Communication System: FM; Frequency: 941.525 MHz;Duty Cycle: 1:1 Medium parameters used: f = 941.525 MHz; σ = 0.975 S/m; ε r = 39.945; ρ = 1000 kg/m 3 •Probe: EX3DV4 - SN7441; ConvF(9.69, 9.69, 9.69) @ 941.525 MHz; Calibrated: 2018/12/13 Phantom section: Flat Section DASY5 Configuration: •Sensor-Surface: 1.4mm (Mechanical Surface Detection) •Electronics: DAE3 Sn471; Calibrated: 2018/12/3 •Phantom: SAM (30deg probe tilt) with CRP v5.0_20150321; Type: QD000P40CD; Serial: TP:1874 •Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (61x151x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 2.98 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 10.28 V/m; Power Drift = 0.11 dB Peak SAR (extrapolated) = 4.54 W/kg SAR(1 g) = 1.83 W/kg; SAR(10 g) = 0.968 W/kg Maximum value of SAR (measured) = 3.61 W/kg 0 dB = 3.61 W/kg = 5.58 dBW/kg Report No.: R1911012- 20 Page 4 of 6 Test Plot 4#: 950.675 MHz_Handheld Left DUT: UHF Plug-on Transmitter; Type: HHA/E07-941; Serial: 3 Communication System: FM; Frequency: 950.675 MHz;Duty Cycle: 1:1 Medium parameters used: f = 950.675 MHz; σ = 0.988 S/m; ε r = 39.894; ρ = 1000 kg/m 3 •Probe: EX3DV4 - SN7441; ConvF(9.69, 9.69, 9.69) @ 950.675 MHz; Calibrated: 2018/12/13 Phantom section: Flat Section DASY5 Configuration: •Sensor-Surface: 1.4mm (Mechanical Surface Detection) •Electronics: DAE3 Sn471; Calibrated: 2018/12/3 •Phantom: SAM (30deg probe tilt) with CRP v5.0_20150321; Type: QD000P40CD; Serial: TP:1874 •Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (61x151x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 2.80 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 10.16 V/m; Power Drift = 0.05 dB Peak SAR (extrapolated) = 4.11 W/kg SAR(1 g) = 1.83 W/kg; SAR(10 g) = 0.986 W/kg Maximum value of SAR (measured) = 3.20 W/kg 0 dB = 3.20 W/kg = 5.05 dBW/kg Report No.: R1911012- 20 Page 5 of 6 Test Plot 5#: 959.825 MHz_Handheld Left DUT: UHF Plug-on Transmitter; Type: HHA/E07-941; Serial: 3 Communication System: FM; Frequency: 959.825 MHz;Duty Cycle: 1:1 Medium parameters used: f = 959.825 MHz; σ = 1.003 S/m; ε r = 39.811; ρ = 1000 kg/m 3 •Probe: EX3DV4 - SN7441; ConvF(9.69, 9.69, 9.69) @ 959.825 MHz; Calibrated: 2018/12/13 Phantom section: Flat Section DASY5 Configuration: •Sensor-Surface: 1.4mm (Mechanical Surface Detection) •Electronics: DAE3 Sn471; Calibrated: 2018/12/3 •Phantom: SAM (30deg probe tilt) with CRP v5.0_20150321; Type: QD000P40CD; Serial: TP:1874 •Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (61x151x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 2.73 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 11.93 V/m; Power Drift = 0.19 dB Peak SAR (extrapolated) = 5.40 W/kg SAR(1 g) = 1.91 W/kg; SAR(10 g) = 0.906 W/kg Maximum value of SAR (measured) = 4.12 W/kg 0 dB = 4.12 W/kg = 6.15 dBW/kg Report No.: R1911012- 20 Page 6 of 6 Test Plot 6#: 950.675 MHz_Handheld Right DUT: UHF Plug-on Transmitter; Type: HHA/E07-941 ; Serial: 3 Communication System: FM; Frequency: 950.675 MHz;Duty Cycle: 1:1 Medium parameters used: f = 950.675 MHz; σ = 0.988 S/m; ε r = 39.894; ρ = 1000 kg/m 3 •Probe: EX3DV4 - SN7441; ConvF(9.69, 9.69, 9.69) @ 950.675 MHz; Calibrated: 2018/12/13 Phantom section: Flat Section DASY5 Configuration: •Sensor-Surface: 1.4mm (Mechanical Surface Detection) •Electronics: DAE3 Sn471; Calibrated: 2018/12/3 •Phantom: SAM (30deg probe tilt) with CRP v5.0_20150321; …

Text truncated - open the document above for the full version.

Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. This report must not be used by the customer to claim product certification, approval, or endorsement by A2LA*, NIST, or any agency of the Federal Government. * This report may contain data that are not covered by the A2LA accreditation and are marked with an asterisk “*” (Rev.2) FCC PART 74, SUBPART H ISEDC RSS-123, ISSUE 4 TEST AND MEASUREMENT REPORT For Lectrosonics, Inc. 581 Laser Road NE, Rio Rancho, NM 87124, USA Report Type: Original Report Product Type: Wireless Microphone Transmitter Prepared By: Zhao Zhao Test Engineer Report Number R1911012-74 Report Issue Date: 2020-01-28 Reviewed By: Simon Ma RF Supervisor Bay Area Compliance Laboratories Corp. 1274 Anvilwood Avenue, Sunnyvale, CA 94089, USA Tel: +1 (408) 732-9162, Fax: +1 (408) 732-9164 FCC ID: DBZHHA79 IC: 8024A-HHA79 Lectrosonics, Inc. FCC ID: DBZHHA79, IC: 8024A-HHA79 Report Number: R1911012-74 Page 2 of 44 FCC Part 74/ISEDC RSS-123 Test Report TABLE OF CONTENTS 1 GENERAL DESCRIPTION ................................................................................................................................. 5 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) .......................................................................... 5 1.2 MECHANICAL DESCRIPTION OF EUT ................................................................................................................. 5 1.3 OBJECTIVE ......................................................................................................................................................... 5 1.4 RELATED SUBMITTAL(S)/GRANT(S) ................................................................................................................... 5 1.5 TEST METHODOLOGY ........................................................................................................................................ 5 1.6 MEASUREMENT UNCERTAINTY .......................................................................................................................... 6 1.7 TEST FACILITY REGISTRATIONS ........................................................................................................................ 6 1.8 TEST FACILITY ACCREDITATIONS ...................................................................................................................... 7 2 EUT TEST CONFIGURATION ........................................................................................................................... 9 2.1 JUSTIFICATION ................................................................................................................................................... 9 2.2 EUT EXERCISE SOFTWARE ................................................................................................................................ 9 2.3 SPECIAL EQUIPMENT ......................................................................................................................................... 9 2.4 EQUIPMENT MODIFICATIONS ............................................................................................................................. 9 2.5 LOCAL SUPPORT EQUIPMENT............................................................................................................................. 9 2.6 INTERFACE PORTS AND CABLES ........................................................................................................................ 9 3 SUMMARY OF TEST RESULTS ...................................................................................................................... 10 4 FCC §2.1093 & ISEDC RSS-102 - RF EXPOSURE ......................................................................................... 11 5 FCC §74.861(D) (1) & ISEDC RSS-123 §8.2 - RF OUTPUT POWER ........................................................... 12 5.1 APPLICABLE STANDARDS ................................................................................................................................ 12 5.2 TEST PROCEDURE ............................................................................................................................................ 12 5.3 TEST EQUIPMENT LIST AND DETAILS .............................................................................................................. 13 5.4 TEST ENVIRONMENTAL CONDITIONS ............................................................................................................... 13 5.5 TEST RESULTS ................................................................................................................................................. 13 6 FCC §2.1049, §74.861(D)(4)(I) & ISEDC RSS-123 §8.2, §8.3 - OCCUPIED BANDWIDTH & EMISSION MASK 17 6.1 APPLICABLE STANDARDS ................................................................................................................................ 17 6.2 TEST PROCEDURE ............................................................................................................................................ 18 6.3 TEST EQUIPMENT LIST AND DETAILS .............................................................................................................. 18 6.4 TEST ENVIRONMENTAL CONDITIONS ............................................................................................................... 18 6.5 TEST RESULTS ................................................................................................................................................. 18 7 FCC §74.861(D)(4)(I) & ISEDC RSS-123 §8.3 - CONDUCTED SPURIOUS EMISSIONS AT ANTENNA PORT 22 7.1 APPLICABLE STANDARDS ................................................................................................................................ 22 7.2 TEST PROCEDURE ...........…

Text truncated - open the document above for the full version.

Lectrosonics, Inc. FCC ID: DBZHHA79, IC: 8024A-HHA79 EUT Test Setup Photographs 1.1. EUT Test Setup Rear Antenna (Above 1GHz) 1.2. EUT Test Setup Front EUT (Above 1GHz) Lectrosonics, Inc. FCC ID: DBZHHA79, IC: 8024A-HHA79 1.3. EUT Test Setup Rear EUT (Below 1GHZ) 1.4. EUT Test Setup Front Antenna (Below 1GHZ)

Report No.: R1911012-20 Page 1 of 4 APPENDIX B EUT TEST POSITION PHOTOS Liquid depth ≥ 15cm Phantom: SAM (30deg probe tilt) with CRP v5.0_20150321; Type: QD000P40CD; Serial: TP:1874 Report No.: R1911012-20 Page 2 of 4 Handheld Front Setup Photo Handheld Rear Setup Photo Report No.: R1911012-20 Page 3 of 4 Handheld Left Setup Photo Handheld Right Setup Photo Report No.: R1911012-20 Page 4 of 4 Handheld Bottom Setup Photo