DDEETG5000FM BROADCAST TRANSMITTER

IDENTIFICATION AND QUICK START MANUAL Rev. 02- 27/11/2013 Cod. MAN1008QUK ETG5200 ETG5000 ETG3500 ETG2500 (list of variations available in the manual) SOLID STATE FM TRANSMITTER 0470 Elenos s.r.l. declares that the equipment described in this document is compliant with the 1999/05/EC Directive. For details please refer to the “EC Marking” section. All rights reserved. No part of this manual can be reproduced in any form without prior written authorization from Elenos S.r.l. Via G. Amendola 9, 44028 Poggio Renatico Ferrara (Italy) C.C.I.A.A. 101 216, Tax code and VAT reg. no. IT00415540384 Please remember to register the product purchased on http://www.elenos.com/product-registration/ Please contact technical support service for information and assistance: Elenos Ph : +39 0532 829965 Fax : +39 0532 829177 E-mail : [email protected] Internet web site : www.elenos.com Elenos USA 1315 nw 98th Ct. Suite 9, 33172 Miami (Florida), Ph 1-855-ELENOS-0 (1-855-353-6670) Elenos APAC 53/64 Saracha Villa, Sansuk Muang Chonburi (Thailand), Ph +66 83 618-9333 Please complete the RMA form (ITA http://www.elenos.com/it/elenos-rma/ or ENG http://www.elenos. com/elenos-rma/) and provide the equipment serial number (indicated on the nameplate). UNI EN ISO 9001:2008 certified company Certificate No.102222A 3 Revisions No.DateDescription 0002/04/2012Original version 0107/05/2013 Validity for ETG3500-ETG2500 transmitters Warranty management reference 208V 2-ph mains configuration Grounding instructions for antenna system 0227/11/2013Warranty conditions Revisions 4 Series models Series models TransmitterNumber of modulesNumber of driversMaximum output power ETG5200715200W ETG5000715000W ETG4000/5 ETG3500/5 ETG3000/5 ETG2500/5 ETG2000/5 ETG1800/5 ETG1500/5 ETG1200/5 ETG1000/5 ETG800/5 ETG500/5 71Equal to the rated value ETG3500513500W ETG3000/3.5 ETG2500/3.5 ETG2000/3.5 ETG1800/3.5 ETG1500/3.5 ETG1200/3.5 ETG1000/3.5 ETG800/3.5 ETG500/3.5 51Equal to the rated value ETG2500412500W ETG2000/2.5 ETG1800/2.5 ETG1500/2.5 ETG1200/2.5 ETG1000/2.5 ETG800/2.5 ETG500/2.5 41Equal to the rated value 5 1 Informative letter ......................................................................................................................7 1.1 Personnel in charge ...........................................................................................................7 1.2 Warranty ............................................................................................................................8 1.3 Exclusion ............................................................................................................................8 1.4 Exemption from liability ....................................................................................................9 2 EC Marking ...............................................................................................................................11 3 Safety ......................................................................................................................................15 3.1 Precautions ......................................................................................................................15 3.2 First aid ............................................................................................................................17 3.2.1 Treatment of electrical burns ...................................................................................17 3.2.1.1 Extensive burns and skin cuts ...........................................................................17 3.2.1.2 Less severe burns (1st and 2nd degree) ..........................................................17 3.2.2 Treatment of electric shocks ....................................................................................17 3.2.2.1 If the victim is unresponsive.............................................................................17 3.2.2.2 If the victim is responsive .................................................................................18 3.3 Workplace characteristics ................................................................................................18 3.3.1 Room characteristics ................................................................................................18 3.3.2 Electrical system characteristics ...............................................................................18 4 Product presentation ..............................................................................................................21 4.1 Marks and labels ..............................................................................................................21 4.2 Front panel .......................................................................................................................23 4.3 Rear Panel ........................................................................................................................25 5 Quick instructions for commissioning ..................................................................................27 5.1 Installation .......................................................................................................................27 5.2 Factory settings ................................................................................................................34 5.3 Main parameter setup .....................................................................................................35 5.3.1 Frequency setup .......................................................................................................36 5.3.2 Power setup..............................................................................................................37 5.3.3 Audio signal setup ....................................................................................................38 5.3.3.1 MUTE .................................................................................................…

Text truncated - open the document above for the full version.

BEI ELECTRONICS, LLC. 4100 North 24 th Street, P.O. Box 3606 Quincy, Illinois 62305 USA • Phone (217) 224-9600 • Fax (217) 224-9607 • www.bdcast.com • [email protected] January 28, 2020 Federal Communications Commission Authorization and Evaluation Division SUBJECT: Confidentiality Request regarding Application for Certification for FCC ID: DDEETG5000 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: EXHIBIT TYPE Schematics Circuit Description Parts List Tuning Procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commission’s public notice, we also request temporary confidential treatment of information accompanying this application as outlined below for 180 Days: EXHIBIT TYPE Internal Photos Test Set up Photos User Manual Regards, Thoma s Beck Executive Vice President

BEI Electronics, LLC 4100 North 24 th Street, P.O. Box 3606, Quincy, Illinois 62305 USA • Phone (217) 224-9600 • Fax (217) 224-9607 • www.bdcast.com • [email protected] July 5, 1019 Timco Engineering, Inc. 849 N.W. State Road 45 P.O. Box 370 Newberry, FL 32669 SUBJECT: Application(s) for Certification for FCC ID: DDEETG5000, IC: 131A-ETG5000, Model ETG5000 To Whom It May Concern: We, the undersigned, hereby authorize Sharon Hoffman at TIMCO ENGINEERING, INC. on our behalf, to apply for certification on our equipment referenced above. Any and all acts carried out by TIMCO ENGINEERING, INC. on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards, Thomas Beck Executive Vice President

APPLICANT: BEI ELECTRONICS, LLC. IC: FCC ID: DDEETG5000 IC: 131A-ETG5000 EXTERNAL PHOTOS F RONT VIEW R EAR VIEW RIGHT SIDE VIEW LEFT SIDE VIEW TOP VIEW BOTTON VIEW

BEI ELECTRONICS, LLC LABEL SAMPLE AND LOCATION Location FCC ID: DDEETG5000 IC: 131A-ETG5000 MODEL: ETG5000 CONTAINS: FCC ID: RI7GL865Q3 IC: 5131A-GL865Q3

2U3KDE283-0 MICRO STREAMING TOP 2U3KDE283-0 MICRO STREAMING BOTTOM APPLICANT: BEI ELECTRONICS, LLC. MODEL: ETG5000 2U3KIA284-0 MODEM TOP 2U3KIA284-0 MODEM BOTTOM 2U3KLA284-2 AUX BOARD TOP 2U3KLA284-2 AUX BOARD BOTTOM 2U3KOA284-0 PIGGY BOARD TOP 2U3KOA284-0 PIGGY BOARD BOTTOM 2U3KXA285-0 XLR/MPX SWITCHING TOP 2U3KXA285-0 XLR/MPX SWITCHING BOTTOM 2U3KYA285-0 CONNECTION TO MPX TOP 2U3KYA285-0 CONNECTION TO MPX BOTTOM DRM 5A972-0 XLR ADAPTER TOP DRM 5A972-0 XLR ADAPTER BOTTOM E3K 3A044-1 SW. 2 BIT 16-28V POWER BOARD TOP E3K 3A044-1 SW. 2 BIT 16-28V POWER BOARD BOTTOM EPSU0A516-5 3KW PFC POWER BOARD TOP EPSU0A516-5 POWER BOARD 3KW PFC BOTTOM EPSU3A516-2 COM. PFC AND NETWORK TRIGGER SW. 3KW BOTTOM EPSU3A516-2 COM. PFC AND NETWORK TRIGGER SW. 3KW TOP EPSU4A516-2 MOSFET DRIVER SW. 3KW TOP EPSU4A516-2 MOSFET DRIVER SW. 3KW BOTTOM EPSU5A516-0 TEMP. PROBE SW. 3KW TOP EPSU5A516-0 TEMP. PROBE SW. 3KW BOTTOM EPSU6A519-1 NETWORK FILTER BOARD WITH FUSES TOP EPSU6A519-1 NETWORK FILTER BOARD WITH FUSES BOTTOM EPSU7A510-1 POWER SUPPLY CONTROL SW.3KW 45-50V TOP EPSU7A510-1 POWER SUPPLY CONTROL SW.3KW 45-50V BOTTOM P5780A279-4 INPUT STAGE FOR BLF578 TOP P5780A279-4 INPUT STAGE FOR BLF578 BOTTOM P5781A279-4 OUTPUT STAGE FOR BLF578 TOP P5781A279-4 OUTPUT STAGE FOR BLF578 BOTTOM SYS 6A994-2 TC/TS BOARD TOP SYS 6A994-2 TC/TS BOARD BOTTOM SYS 7B994-0 PROFILES BOARD TOP SYS 7B994-0 PROFILES BOARD BOTTOM TG3K0C866-2 STEREO CODER TOP TG3K0C866-2 STEREO CODER BOTTOM TG5K0A889-0 7-WAY SPLITTER BOARD TOP TG5K0A889-0 7-WAY SPLITTER BOARD BOTTOM TG5K1A880-2 7-MODULES ACQUISITION BOARD TOP TG5K1A880-2 7-MODULES ACQUISITION BOARD BOTTOM TG5K2A881-2 FRONT PANEL BOARD TOP TG5K2A881-2 FRONT PANEL BOARD BOTTOM TG5K3A881-3 CPU FITTING BOARD TOP TG5K3A881-3 CPU FITTING BOARD BOTTOM TG5K8A884-0 SEPARATE INTERLOCK BOARD TOP TG5K8A884-0 SEPARATE INTERLOCK BOARD BOTTOM TG5KAA888-0 ANALOG DRIVER POWER SUPPLY BOARD TOP TG5KAA888-0 ANALOG DRIVER POWER SUPPLY BOARD BOTTOM XNK 2A457-1 READING HEAD BOARD TOP XNK 2A457-1 READING HEAD BOARD BOTTOM XNK AB451-2 VCO BOARD TOP XNK AB451-2 VCO BOARD BOTTOM VCO BOARD – TOP VIEW – SHIELD REMOVED XNK BA452-0 OLED ADAPTER TOP XNK AXNK BA452-0 OLED ADAPTER BOTTOM XNK BA452-0 OLED ADAPTER TOP XNK ED453-0 CPU SLIM LINE BOARD TOP XNK ED453-0 CPU SLIM LINE BOARD BOTTOM XNK GB454-5 DRIVER FOR MRF171A TOP yNK 'Bκ5κ-5 DRIsER FOR DRF1ϳ1A BOTTOM yNK PA45ς-ϭ PGD AND SERIAL CONNECTION TOP XNK PA456-1 PGM AND SERIAL CONNECTION BOTTOM ETG5000 TOP VIEW ETG5000 BOTTOM VIEW ETG5000 RIGHT SIDE VIEW

849 NW STATE ROAD 45 PHONE: 888.472.2424 OR 352.472.5500 NEWBERRY, FL 32669 USA EMAIL: [email protected] WEB: HTTP://WWW.TIMCOENGR.COM An IIA Company RF Exposure Evaluation Report APPLICANT BEI ELECTRONICS, LLC ADDRESS 4100 N 24TH STREET P.O. BOX 3606 QUINCY, IL 62305 FCC ID DDEETG5000 MODEL NUMBER ETG5000 PRODUCT DESCRIPTION FM BROADCAST TRANSMITTER DATE SAMPLE RECEIVED 11/21/2019 FINAL TEST DATE 11/21/2019 PREPARED BY Tim Royer TEST RESULTS PASS FAIL Report Number Report Version Description Issue Date 214UT20 MPETestReport_ Rev1 Initial Issue 3/5/2020 THE ATTACHED REPORT SHALL NOT BE REPRODUCED EXCEPT IN FULL WITHOUT THE WRITTEN APPROVAL OF TIMCO ENGINEERING, INC. TABLE OF CONTENTS GENERAL REMARKS ........................................................................................................ 2 GENERAL INFORMATION ................................................................................................ 3 ANTENNA INFORMATION ............................................................................................... 3 MPE CALCULATION ......................................................................................................... 3 MPE LIMITS .................................................................................................................... 4 MPE TABLE ..................................................................................................................... 5 GENERAL UNCONTROLLED EXPOSURE ......................................................................................... 5 GENERAL CONTROLLED EXPOSURE ............................................................................................ 6 Applicant: BEI ELECTRONICS, LLC FCC ID: DDEETG5000 Report: 214UT20 MPE_TestReport Page 2 of 6 GENERAL REMARKS Summary The device under test does: Fulfill the general approval requirements as identified in this test report and was selected by the customer. Not fulfill the general approval requirements as identified in this test report Attestations This equipment has been tested in accordance with the standards identified in this test report. To the best of my knowledge and belief, these tests were performed using the measurement procedures described in this report. All instrumentation and accessories used to test products for compliance to the indicated standards are calibrated regularly in accordance with ISO 17025 requirements. I attest that the necessary measurements were made at: Timco Engineering Inc. 849 NW State Road 45 Newberry, FL 32669 Designation #: US1070 Prepared by: Name and Title Tim Royer, Project Manager / EMC Engineer Date 11/25/2019 Applicant: BEI ELECTRONICS, LLC FCC ID: DDEETG5000 Report: 214UT20 MPE_TestReport Page 3 of 6 GENERAL INFORMATION EUT Description FM BROADCAST TRANSMITTER Model Number ETG5000 EUT Power Source ☒110–120Vac, 50– 60Hz ☐ DC Power (13.8 VDC) ☐ Battery Operated Test Item ☐ Engineering Prototype ☒ Pre-Production ☐ Production Type of Equipment ☒ Fixed ☐ Mobile ☐ Portable Antenna Connector External, N Type Test Conditions The temperature was 26ºC Relative humidity of 50%. Modification to the EUT No Modification to EUT. Applicable Standards FCC CFR 47 Part 2.1091 Test Facility Timco Engineering Inc. at 849 NW State Road 45 Newberry, FL 32669 USA. Designation #: US1070 ANTENNA INFORMATION Antenna is Provided Type Max Gain (dBi) No n/a 0.0 RF POWER OUTPUT OUTPUT POWER: 5313 Watts MPE CALCULATION The minimum separation distance is calculated as follows: Applicant: BEI ELECTRONICS, LLC FCC ID: DDEETG5000 Report: 214UT20 MPE_TestReport Page 4 of 6 MPE LIMITS Applicant: BEI ELECTRONICS, LLC FCC ID: DDEETG5000 Report: 214UT20 MPE_TestReport Page 5 of 6 MPE Table General Uncontrolled Exposure The limit for General Uncontrolled Exposure Environment is calculated as shown in FCC Pt. 1.1310, Table B: Variable Value Max Power 5313 W Frequency Range 88 -108 MHz Duty Cycle (at full power) 100% Max Antenna Gain 0 dBi Coax Loss 0 dB Power Density 1.291 W/cm 2 Minimum Separation Distance 1809.68 cm EUT 20 cm (Standard MPE Distance) 1809.68 cm 1.291 W/cm 2 10569.88 W/cm 2 Applicant: BEI ELECTRONICS, LLC FCC ID: DDEETG5000 Report: 214UT20 MPE_TestReport Page 6 of 6 General Controlled Exposure The limit for General Controlled Exposure Environment is calculated as shown in FCC Pt. 1.1310, Table A: Variable Value Max Power 5313 W Frequency Range 88 -108 MHz Duty Cycle (at full power) 100% Max Antenna Gain 0 dBi Coax Loss 0 dB Power Density 6.455 W/cm 2 Minimum Separation Distance 1809.68 cm EUT 20 cm (Standard MPE Distance) 1809.68 cm 6.455 W/cm 2 10569.88 W/cm 2

849 NW STATE ROAD 45 PHONE: 352.472.5500 NEWBERRY, FL 32669 USA EMAIL: [email protected] WEB: HTTP://WWW.TIMCOENGR.COM An IIA Company FCC PART 73G & BETS 6 LOW POWER FM BROADCAST STATIONS (LPFM) TEST REPORT APPLICANT BEI ELECTRONICS, LLC 4100 N 24TH STREET P.O. BOX 3606 QUINCY, IL 62305 IC 131A-ETG5000 FCC ID DDEETG5000 MODEL NUMBER ETG5000 PRODUCT DESCRIPTION FM BROADCAST TRANSMITTER DATE SAMPLE RECEIVED 12/31/2018 DATE TESTED 02/20 /2019 TESTED BY Tim Royer APPROVED BY Franklin Rose TEST RESULTS PASS FAIL Report Number Report Version Description Issue Date 214UT20 TestReport --- Initial Issue 03/05/2020 Rev1 Updated Power Output 03/18/2020 Rev2 Updated output power calculation and conducted spurious emissions 03/23/2020 THE ATTACHED REPORT SHALL NOT BE REPRODUCED EXCEPT IN FULL WITHOUT THE WRITTEN APPROVAL OF TIMCO ENGINEERING, INC. TABLE OF CONTENTS GENERAL REMARKS ........................................................................................................ 1 GENERAL INFORMATION ................................................................................................ 2 RESULTS SUMMARY ........................................................................................................ 3 RF POWER OUTPUT ........................................................................................................ 4 TEST DATA: RF OUTPUT POWER .............................................................................................. 6 FCC PART 2.1033(C)(8) .................................................................................................. 6 MODULATION CHARACTERISTICS .................................................................................. 7 AUDIO FREQUENCY RESPONSE ....................................................................................... 8 TEST DATA: AUDIO FREQUENCY RESPONSE PLOT ........................................................................... 8 AUDIO INPUT VS MODULATION ..................................................................................... 9 TEST DATA: MODULATION LIMITING ........................................................................................ 10 OCCUPIED BANDWIDTH & EMISSION MASK ................................................................. 11 TEST DATA: OCCUPIED BANDWIDTH TABLE ............................................................................. 12 20DB OCCUPIED BANDWIDTH PLOT LOW END OF BAND .......................................................... 12 20DB OCCUPIED BANDWIDTH PLOT MIDDLE OF BAND ............................................................ 13 20DB OCCUPIED BANDWIDTH PLOT HIGH END OF BAND ......................................................... 14 EMISSION MASK PLOT LOW END OF BAND ............................................................................ 15 EMISSION MASK PLOT MIDDLE OF BAND .............................................................................. 16 EMISSION MASK PLOT HIGH END OF BAND ........................................................................... 17 SPURIOUS EMISSIONS AT ANTENNA TERMINALS (CONDUCTED) ................................. 18 TEST DATA: LOW FREQUENCY ............................................................................................ 19 TEST DATA: MIDDLE FREQUENCY ....................................................................................... 19 TEST DATA: HIGH FREQUENCY ........................................................................................... 20 FIELD STRENGTH OF SPURIOUS EMISSIONS ................................................................ 21 TEST DATA: LOW FREQUENCY ............................................................................................ 23 TEST DATA: MIDDLE FREQUENCY ....................................................................................... 24 TEST DATA: HIGH FREQUENCY ........................................................................................... 25 FREQUENCY STABILITY ................................................................................................ 26 TEST DATA: FCC FREQUENCY STABILITY TABLE .......................................................................... 27 TEST DATA: FCC FREQUENCY STABILITY PLOT ........................................................................... 27 TEST DATA: IC FREQUENCY STABILITY TABLE ............................................................................ 28 TEST DATA: IC FREQUENCY STABILITY PLOT .............................................................................. 28 STATE OF THE MEASUREMENT UNCERTAINTITY ........................................................... 29 EQUIPMENT LIST .......................................................................................................... 30 Applicant: BEI ELECTRONICS, LLC FCC ID: DDEETG5000 IC: 131A-ETG5000 Report: 214UT20 TestReport_Rev2 Page 1 of 30 GENERAL REMARKS Summary The device under test does: Fulfill the general approval requirements as identified in this test report and was selected by the customer. Not fulfill the general approval requirements as identified in this test report Attestations This equipment has been tested in accordance with the standards identified in this test report. To the best of my knowledge and belief, these tests were performed using the measurement procedures described in this report. All instrumentation and accessories used to test products for compliance to the indicated standards are calibrated regularly in accordance with ISO 17025 requirements. I attest that the necessary measurements were made at: Timco Engineering Inc. 849 NW State Road 45 Newberry, FL 32669 Designation #: US1070 Tested by: Name and Title Tim Royer, Project Manager / EMC Testing Engineer Date 02/20/2019 Reviewed and Approved by: Name and Title Franklin Rose, Project Manager / EMC Specialist Date 02/27/2019 Applicant: BEI ELECTRONICS, LLC FCC ID: DDEETG5000 IC: 131A-ETG5000 Report: 214UT20 TestRe…

Text truncated - open the document above for the full version.

TEST SETUP PHOTOGRAPHS Applicant: BEI ELECTRONICS, LLC FCC ID: DDEETG5000 IC: 131A-ETG5000 Conducted Measurements TEST SETUP PHOTOGRAPHS Field Strength of Spurious Emissions TEST SETUP PHOTOGRAPHS Frequency Stability