DMODAD1G4Antenna Transceiver

DE Rahmenbedingungen und Einschränkungen für die Nutzung von Frequenzen In Ihrem Land gelten möglicherweise gesonderte Rahmen- bedingungen und Einschränkungen für die Nutzung von Fre- quenzen. Informieren Sie sich vor der Inbetriebnahme des Produktes unter folgender Adresse: www.sennheiser.com/sifa Herstellererklärungen Garantie Sennheiser electronic SE & Co. KG übernimmt für diese Pro- dukte eine Garantie von 24 Monaten. Die aktuell geltenden Garantiebedingungen können Sie über das Internet www.sennheiser.com oder Ihren Sennheiser- Partner beziehen. In Übereinstimmung mit den folgenden Anforde- rungen • Verordnung (EU) 2023/988 über die all- gemeine Produktsicherheit • WEEE-Richtlinie (2012/19/EU) Hinweise zur Entsorgung Das Symbol der durchgestrichenen Mülltonne auf dem Pro- dukt, Batterie/Akku (falls zutreffend) und/oder der Verpa- ckung weist Sie darauf hin, dass diese Produkte nicht über den normalen Hausmüll entsorgt werden dürfen, sondern am Ende ihrer Lebensdauer getrennt entsorgt werden müssen. Für die Verpackung beachten Sie die Abfalltrennung in Ihrem Land. Nicht sachgerechte Entsorgung von Verpackungsma- terialien kann Ihre Gesundheit und die Umwelt schädigen. Die getrennte Sammlung von Elektro- und Elektronik-Altge- räten, Batterien/Akkus (falls zutreffend) und Verpackungen dient dazu, die Wiederverwendung und das Recycling zu fördern und negative Auswirkungen auf Ihre Gesundheit und die Umwelt zu verhindern, z. B. durch potenziell gefährliche Stoffe, die in diesen Produkten enthalten sind. Führen Sie Elektro- und Elektronikgeräte und Batterien/Akkus am Ende ihrer Lebensdauer dem Recycling zu, um enthaltene Wert- stoffe nutzbar zu machen und eine Vermüllung der Umwelt zu vermeiden. Wenn Batterien/Akkus zerstörungsfrei entnommen werden können, haben Sie die Pflicht, diese getrennt der Entsorgung zuzuführen (zur sicheren Entnahme von Batterien/Akkus siehe Bedienungsanleitung des Produkts). Gehen Sie insbe- sondere mit lithiumhaltigen Batterien/Akkus vorsichtig um, da diese besondere Risiken beinhalten wie Brand- und/oder Verschluckungsgefahr bei Knopfzellen. Reduzieren Sie die Entstehung von Abfällen aus Batterien soweit wie möglich, indem Sie Batterien mit längerer Lebensdauer oder wieder- aufladbare Akkus einsetzen. Weitere Informationen über das Recycling dieser Produkte erhalten Sie bei Ihrer Gemeindeverwaltung, bei den kom- munalen Sammelstellen oder bei Ihrem Sennheiser-Partner. Elektro- oder Elektronikgeräte können Sie auch bei rück- nahmepflichtigen Vertreibern zurückgeben. Damit leisten Sie einen wichtigen Beitrag zum Schutz der Umwelt und der öffentlichen Gesundheit. Hinweis zur Verarbeitung personenbezogener Daten Das Gerät Spectera ist für die Aufzeichnung und Übertra- gung von Sprache und anderen akustischen Signalen aus- gelegt. Bitte beachten Sie, dass die Stimme einer Person als personenbezogene Daten im Sinne der Datenschutz-Grund- verordnung (DSGVO) gelten kann, insbesondere wenn sie aufgezeichnet oder zu Identifizierungszwecken verwendet wird. Wir als Hersteller verarbeiten keine Sprachdaten. In Verbin- dung mit Aufzeichnungsgeräten, Anwendungen oder Online- Diensten kann die Nutzung dieses Produkts jedoch die Ver- arbeitung personenbezogener Daten beinhalten. In solchen Fällen sind Sie als Nutzer dafür verantwortlich, die geltenden Datenschutzgesetze einzuhalten, z. B. Einholung der Einwil- ligung der Personen, bevor sie deren Stimmen aufzeichnen. Wir empfehlen Ihnen daher, sich mit den Datenschutzrichtli- nien der Anwendungen oder Dienste vertraut zu machen, die Sie in Verbindung mit diesem Produkt verwenden. EU-Konformitätserklärung • RoHS-Richtlinie (2011/65/EU) Hiermit erklärt Sennheiser electronic SE & Co. KG, dass der Funkanlagentyp (Zubehör) Digital Antenna Directional der Richtlinie 2014/53/EU entspricht. Der vollständige Text der EU-Konformitätserklärung ist unter der folgenden Internetadresse verfügbar: www.sennheiser.com/download EN Conditions and restrictions for using frequencies There may be special conditions and restrictions for using frequencies in your country. Before putting the product into operation, find the informa- tion for your country at the following address: www.sennheiser.com/sifa Manufacturer declarations Warranty Sennheiser electronic SE & Co. KG gives a warranty of 24 months on these products. For the current warranty conditions, please visit our website at www.sennheiser.com or contact your Sennheiser partner. Warranty FOR AUSTRALIA and NEW ZEALAND ONLY: Sennheiser Australia Pty Ltd provides a warranty of 24 months on these products. For the current warranty conditions, visit Sennheiser web- site: Australia: https://en-au.sennheiser.com/ New Zealand: https://en-nz.sennheiser.com/ Sennheiser goods come with guarantees that cannot be ex- cluded under Australian and New Zealand Consumer law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. This warranty is in addition to other rights or remedies under law. Nothing in this warranty excludes, limits or modifies any remedy available to be consumer which is granted by law. To make a claim under this contract, raise a case via Sennheiser website Australia: https://en-au.sennheiser.com/service-support-contact New Zealand: https://en-nz.sennheiser.com/service-support-contact All expenses of claiming the warranty will be borne by the person making the claim. Sennheiser international warranty is provided by: Sennheiser Australia Pty Ltd (ABN 68 165 388 312) Level 14, Tower A Ze- nith Building, 821 Pacific Highway, Chatswood NSW 2067, Australia In compliance with the following requirements EU: UK: • Regulation (EU) 2023/988 on ge- neral product safety • WEEE Directive (2012/19/EU) • WEEE Regulations (2013) Notes on disposal The symbol of the crosse…

Text truncated - open the document above for the full version.

Sennheiser electronic SE & Co. KG Am Labor 1, 30900 Wedemark, Germany www.sennheiser.com Printed in Germany, Publ. 08/25, 597273/A04 SPECTERA DAD (UHF) DAD (1G4) Quick Guide Kurzanleitung Guide de démarrage rapide Guida rapida Instrucciones resumidas Instruções resumidas Beknopte gebruiksaanwijzing Krótka instrukcja obsługi Snabbguide Kort vejledning Pikaohje Σύντομες οδηγίες Kısa Kılavuz Краткая инструкция 快速指南 快速使用指南 クイックガイド 요약 안내서 www.sennheiser.com/download In the boxOverview Power supply and data connection Setup MAIN DIRECTION MAIN DIRECTION MAIN DIRECTION MAIN DIRECTION Compliance Sheet Safety Guide Quick Guide PUSHPUSHPUSHPUSH PUSH PUSHPUSH PSU 1 ~100-240V 50/60Hz, max. 70W x2 PSU 2 Antenna WCLK in out Control Cascade in out primary secondary SLOT 1 2 SLOT B C D A MAIN DIRECTION Status LED Ruggedized RJ45 Microphone stand Hole for rigging safety cable Status LED DAD (UHF) DAD (1G4) OR+ Ruggedized RJ45 3/8" or 5/8" *optional accessories max. 100 m, Cat 5e or higher* Base Station* * *not included LEDE-labelSetup Accessories MAIN DIRECTION MAIN DIRECTION MAIN DIRECTION SEK SEK SPECTERA MainNetwork Dante Headphone Info License Reset Legal Main FCC IDDMODADUHF Network Dante Headphone Info License ResetLegal > 5 m ≥ 0.5 m ≥ 10 m - Connected and RF transmitting - Identify - Connecting - Connected and RF muted LEDStatus - Firmware update in progress Antenna cable Cat 5e* - 10 m (Art. no. 700068) - 25 m (Art. no. 700069) - 50 m (Art. no. 700070) *optional accessories*optional accessories *not included: SPECTERA SEK (UHF) SPECTERA SEK (1G4) *not included * * * * Base Station* E-label for SPECTERA DAD (UHF) and SPECTERA DAD (1G4) can be shown on the SPECTERA Base Station display when connected. Instruction Manual www.sennheiser.com/download Main Legal 2 1

DE Wichtige Sicherheitshinweise 1. Lesen Sie diese Sicherheitshinweise und die Bedie- nungsanleitung des Produkts. 2. Bewahren Sie diese Sicherheitshinweise und die Bedie- nungsanleitung des Produkts auf. Geben Sie das Produkt an andere Nutzer stets zusammen mit diesen Sicher- heitshinweisen und der Bedienungsanleitung weiter. 3. Geben Sie das Produkt an Dritte stets zusammen mit der Bedienungsanleitung und den Sicherheitshinweisen weiter. 4. Verwenden Sie ausschließlich vom Hersteller zugelasse- ne Anbau-, Zubehör- und Ersatzteile. 5. Verwenden Sie das Produkt nur zusammen mit Wagen, Regalen, Stativen, Halterungen oder Tischen, die der Hersteller empfiehlt oder die zusammen mit dem Produkt verkauft werden. 6. Verwenden Sie das Produkt nicht in der Nähe von Was- ser. 7. Reinigen Sie das Produkt nur, wenn es nicht mit dem Stromnetz verbunden ist. Reinigen Sie das Produkt nur mit einem trockenen Tuch. 8. Öffnen Sie das Gehäuse des Produktes nicht eigenmäch- tig. 9. Lassen Sie alle Instandsetzungen von qualifiziertem Ser- vicepersonal durchführen. Instandsetzungen müssen durchgeführt werden, wenn das Produkt auf irgendeine Weise beschädigt wurde, Flüssigkeiten oder Objekte in das Produkt gelangt sind, das Produkt Regen oder Feuchtigkeit ausgesetzt war, es nicht fehlerfrei funktio- niert oder fallen gelassen wurde. 10. Verwenden Sie das Produkt nur unter den in den techni- schen Daten angegebenen Betriebsbedingungen. 11. Nehmen Sie das Produkt nicht in Betrieb, wenn es beim Transport beschädigt wurde. 12. Verlegen Sie Kabel stets so, dass niemand darüber stol- pern kann. 13. Halten Sie Flüssigkeiten und elektrisch leitfähige Gegen- stände, die nicht betriebsbedingt notwendig sind, vom Produkt und dessen Anschlüssen fern. 14. Verwenden Sie zum Reinigen keine Lösungsmittel oder aggressiven Reinigungsmittel. 15. Vorsicht: Sehr hohe Signalpegel können Ihr Gehör und Ihre Lautsprecher schädigen! Reduzieren Sie an den an- geschlossenen Wiedergabegeräten die Lautstärke, be- vor Sie das Produkt anschließen, auch wegen der Gefahr der akustischen Rückkopplung. Bestimmungsgemäße Verwendung Das Produkt ist für den Einsatz in Innenräumen und im Au- ßenbereich konzipiert. Das Produkt darf gewerblich verwendet werden. Als nicht bestimmungsgemäßer Gebrauch gilt, wenn Sie das Produkt anders benutzen, als in der zugehörigen Bedie- nungsanleitung beschrieben. Sennheiser übernimmt keine Haftung bei Missbrauch oder nicht ordnungsgemäßem Gebrauch des Produkts sowie der Zusatzgeräte/Zubehörteile. Vor Inbetriebnahme sind die jeweiligen länderspezifischen Vorschriften zu beachten! Verwenden Sie ausschließlich die von Sennheiser empfoh- lenen Antennen. Sicherheitshinweise für Antennen Sichern Sie Antennen gegen Herabfallen/Umkippen. Ver- wenden Sie hierzu Sicherungsseile (Safety Wires). Sicherungsseile, Seilendverbindungen und Verbindungsglie- der müssen in ihrer Dimensionierung und Beschaffenheit den Vorschriften und Standards des Landes entsprechen, in dem Sie diese verwenden! EN Important safety instructions 1. Read these safety instructions and the instruction manu- al of the product. 2. Keep these safety instructions and the instruction ma- nual of the product. Always include all instructions when passing the product on to third parties. 3. Always include this instruction manual and the safety guide when passing the product on to third parties. 4. Only use attachments, accessories and spare parts spe- cified by the manufacturer. 5. Do not use this apparatus near water. 6. Only clean the product when it is not connected to the power supply system. Clean only with a dry cloth. 7. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the appara- tus. 8. Do not attempt to open the product housing on your own. 9. Refer all servicing to qualified service personnel. Ser- vicing is required when the product has been damaged in any way, liquid has been spilled or objects have fallen into the product, when the product has been exposed to rain or moisture, does not operate normally, or has been dropped. 10. Use the product only under the conditions of use listed in the specifications. 11. Do not operate the product if it was damaged during transportation. 12. Always run cables so that no one can trip over them. 13. Keep the product and its connections away from liquids and electrically conductive objects that are not necessa- ry for operating the product. 14. Do not use any solvents or aggressive cleaning agents to clean the product. 15. Caution: Very high signal levels can damage your hearing and your loudspeakers. Reduce the volume on the con- nected audio devices before switching on the product; this will also help prevent acoustic feedback. Intended use The product is designed for indoor and outdoor use. The product can be used for commercial purposes. It is considered improper use when the product is used for any application not named in the corresponding instruction manual. Sennheiser does not accept liability for damage arising from improper use or misuse of this product and its attachments/ accessories. Before putting the products into operation, please observe the respective country-specific regulations! Use only the antennas recommended by Sennheiser. Safety instructions for antennas Use safety wires to protect the antennas against tipping/ dropping. The safety wires, rope terminations and coupling links must comply in their dimensioning and condition with the regula- tions and standards of the country in which they are used! FR Consignes de sécurité importantes 1. Lisez ces consignes de sécurité et la notice d‘emploi du produit. 2. Conservez ces consignes de sécurité et la notice d‘emp- loi du produit. Joignez toujours ces consignes de sécurité et la notice d‘emploi au produit si vous remettez ce der- nier à un tiers. 3. Joignez toujours la notice et les consignes de sécurité à l‘appareil lorsque vous le transmettez à un tiers. 4. Utilisez exclusivement les appareils…

Text truncated - open the document above for the full version.

Sennheiser Electronic Corp. 1 Enterprise Drive Old Lyme Connecticut 06371 United States Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA 2025-11-18 Attestation Statement according to 2.911(d)(7) FCC ID: DMODAD1G4, DMOSEK1G4 TO WHOM IT MAY CONCERN: This letter is to confirm that the applicant Sennheiser Electronic Corp. acts as th e U.S Agent for service of process as required by §2.911(d)(7). The Applicant further acknowledges acceptance to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant / U.S. Agent Si gnature: Signed by (printed name): Michael Lieske Corporate Secretary FRN: 0007220122 Address: 1 Enterprise Drive Old Lyme, Connecticut 06371, United States Telephone No: (860) 434-9190 154 Email: [email protected]

Printed Logarithmic Periodic Dipole Antenna 1350 MHz – 1560 MHz W3936 SE No.: 594120 Rev: 04 PulseElectronics.com Preliminary :(24/27) 1 Internal Features & Applications: Directional antenna for wireless microphone systems Operating frequency range 1350 MHz to 1560 MHz Reduced wind load Printed Logarithmic Periodic Dipole Antenna 1350 MHz – 1560 MHz W3936 SE No.: 594120 Rev: 04 PulseElectronics.com Preliminary :(24/27) 2 Internal Version Control Rev Date Description 0.1 2023-06-21 Initial release 0.2 2024-03-06 Update the header, adding the labels and other RF sections 0.3 2024-05-20 Update mechanical drawing, packing info and production line test setup 0.4 2024-05-31 Update the vacuum foil bag and carton box labels and packing spec Mechanical / Environmental Specifications Dimension (Length x Width x Height) Color Weight Material 231.06 x 205.3 x 3mm Black 105g FR4 Operating Temperature Storage Temperature RoHS-6 Compliant -40°C to +85°C -40°C to +85°C Yes Notes: 1. Measured with amplifier metal housing. Electrical specifications 1 @ 25° C Antenna type Nominal Impedance Polarization Radiation pattern LPDA 50Ω Vertical Directional Printed Logarithmic Periodic Dipole Antenna 1350 MHz – 1560 MHz W3936 SE No.: 594120 Rev: 04 PulseElectronics.com Preliminary :(24/27) 3 Internal Dimensions: mm Unless otherwise specified, all tolerances are ±0.25mm Drawing Printed Logarithmic Periodic Dipole Antenna 1350 MHz – 1560 MHz W3936 SE No.: 594120 Rev: 04 PulseElectronics.com Preliminary :(24/27) 4 Internal Production line test setup Bare pcb laminate RF-parameters can be only measure in specified RF -jig on factory. Please check Pulse production SOP document for antenna PCB measurement results without coating and final assembly. Printed Logarithmic Periodic Dipole Antenna 1350 MHz – 1560 MHz W3936 SE No.: 594120 Rev: 04 PulseElectronics.com Preliminary :(24/27) 5 Internal Design Verification Antenna radiator passive RF-performance (amplifier excluded) can be only verified with dummy amplifier box and painted antenna radiator. RF Results Free space measurement: Frequency (MHz) 1350-1560 Return Loss(dB) <-14 Peak Gain (dBi) >6 Avg. Efficiency (%) >70 F/B ratio (dB) >10 Max. RF input power (dBm) +33 HPBW (deg.) >93 Printed Logarithmic Periodic Dipole Antenna 1350 MHz – 1560 MHz W3936 SE No.: 594120 Rev: 04 PulseElectronics.com Preliminary :(24/27) 6 Internal Return Loss Peak Gain & Efficiency Printed Logarithmic Periodic Dipole Antenna 1350 MHz – 1560 MHz W3936 SE No.: 594120 Rev: 04 PulseElectronics.com Preliminary :(24/27) 7 Internal Radiation Pattern . Printed Logarithmic Periodic Dipole Antenna 1350 MHz – 1560 MHz W3936 SE No.: 594120 Rev: 04 PulseElectronics.com Preliminary :(24/27) 8 Internal Antennas packed by aluminum foil vacuum bag and Carton box Vacuum 12pcs PCBs into one vacuum bag, PCBs are separated by kraft paper, 1 desiccant bag per vacuum bag. honeycomb packing material as filling material. Master carton box dimensions (MM)：(460mm*235mm*140mm), 24pcs/carton box Labeling Aluminum Foil Vacuum Bag Label 1 Pulse Part Number/Sennheiser Part Number 2 Packing Quantity inside Vacuum Bag 3 Packing Data: YYYY-MM-DD Packing Printed Logarithmic Periodic Dipole Antenna 1350 MHz – 1560 MHz W3936 SE No.: 594120 Rev: 04 PulseElectronics.com Preliminary :(24/27) 9 Internal Carton box Label 1 Pulse Part Number 2 Sennheiser Part Number 3 Part Name 4 Work Order Number 5 Delivery Quantity 6 Unit 7 Date Code: YYWW 8 Pulse Batch Number 9 Pulse Label Number 10 Pulse Remark 11 RoHS Conformation 12 Pulse Data Matrix Code 13 Pulse Review Number 14 Carton Number, for example, 6 of 8, it means there are totally 8 packages from the same batch and data code, this is the 6 th of those 8 cartons. For More Information: Americas - [email protected] | Europe – [email protected] | Asia – [email protected] | Questions? +1-800-ANTENNA Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright , 2020. Pulse Electronics, Inc. All rights reserved. Company address: Pulse Electronics, a YAGEO Company, 15255 Innovation Drive, Suite #100, San Diego, CA 92128 ‘YAGEO Corporation and its affiliates do not recommend the use of commercial, automotive, and/or COTS grade products for high reliability applications or manned space flight.’

Document Version 1.1 2020-10-30 LONG-TERM CONFIDENTIALITY REQUEST for Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 TO WHOM IT M AY CONCERN Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we request Long-Term Confidentiality for the following product: For the product stated above, we request Long-Term Confidentiality for exhibits which contain Block Diagram, Operational Description, Parts List/Tune Up Info, Schematics, SDR Software/Security Info. The above exhibits contain ou r trade secrets and proprietary information that could be of benefit to o ur competitors. This information will not be publicly available. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Company Name: Phone: Company Address: Fax: E-mail: Contact Name: Signature: Signature Date: Check your GC here. Click Grantee Search. FCC I D: Grantee Code Equipment Product Code

Page 1 EUT Photos EUT: Digital Transceiver Antenna Model No.: SPECTERA DAD 1G4 Frequency Range: EU Lic 1435- 1525 MHz Page 2 External Photos of EUT Front View Back View Page 3 B ottom View Page 4 T op View Page 5 Right Side View Left Side View

E-Label Information Example below is valid only for devices which are subject to Certification Procedure in USA 1.Connect SPECTERA DAD 1G4 to the base Station 2.Turn the rotary knob to the left until "Legal" flashes on the display. Label Location

Page 1 EUT Photos EUT: Digital Transceiver Antenna Model No.: SPECTERA DAD 1G4 Frequency Range: EU Lic 1435- 1525 MHz Page 2 Internal Photos of EUT Bottom View (Main PCB) Page 3 Top View (Main PCB) Page 4 Bottom View (RJ45 PCB) Top View (RJ45 PCB)

© cetecom advanced GmbH Page 1 of 6 TEST REPORT Test report no.: 1-0590-25-01-02_TR1-R01 RF Exposure consideration according to FCC447498D04 V1 Testing laboratory Applicant cetecom advanced GmbH Untertuerkheimer Strasse 6 – 10 66117 Saarbruecken / Germany Phone: + 49 681 5 98 - 0 Fax: + 49 681 5 98 - 9075 Internet: https://cetecomadvanced.com e-mail: [email protected] Accredited Testing Laboratory: The testing laboratory (area of testing) is accredited according to DIN EN ISO/IEC 17025 (2018-03) by the Deutsche Akkreditierungsstelle GmbH (DAkkS). The accreditation is valid for the scope of testing procedures as stated in the accreditation certificate with the registration number: D-PL-12047-01-00. ISED Testing Laboratory Recognized Listing Number: DE0001 FCC designation number: DE0002 Sennheiser electronic SE & Co. KG Am Labor 1 D-30900 Wedemark /Germany Contact: Ouajdi Ochi Manufacturer Sennheiser electronic SE & Co. KG Am Labor 1 D-30900 Wedemark /Germany Test Item Kind of test item: Digital Antenna directional Transceiver part Model name: Spectera DAD 1G4 FCC ID: DMODAD1G4 Frequency: 1435-1525 MHz Technology: WMAS This test report is electronically signed and valid without handwritten signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Test report authorized: Test performed: Alexander Hnatovskiy Eric Tuettmann Lab Manager Testing Manager Radio Labs Radio Labs Test report no.: 1-0590-25-01-02_TR1-R01 © cetecom advanced GmbH Page 2 of 6 1 Table of contents 1 Table of contents ............................................................................................................................................. 2 2 General Information ......................................................................................................................................... 3 2.1 Notes and Disclaimer ............................................................................................................................ 3 2.2 References ............................................................................................................................................ 3 3 General RF Exposure Test Exemptions ............................................................................................................ 3 3.1 MPE-Based Test Exemption ................................................................................................................. 4 4 MPE-Based Test Exemption ............................................................................................................................ 5 4.1 Detailed Description .............................................................................................................................. 5 4.2 Results ................................................................................................................................................... 6 5 Conclusion ........................................................................................................................................................ 6 Test report no.: 1-0590-25-01-02_TR1-R01 © cetecom advanced GmbH Page 3 of 6 2 General Information 2.1 Notes and Disclaimer The test results of this test report relate exclusively to the test item specified in this test report. cetecom advanced GmbH does not assume responsibility for any conclusions and generalizations drawn from the test results with regard to other specimens or samples of the type of the equipment represented by the test item. The test report may only be reproduced or published in full. Reproduction or publication of extracts from the report requires the prior written approval of cetecom advanced GmbH. The testing service provided by cetecom advanced GmbH has been rendered under the current "General Terms and Conditions for cetecom advanced GmbH". cetecom advanced GmbH will not be liable for any loss or damage resulting from false, inaccurate, inappropriate or incomplete product information provided by the customer. Under no circumstances does the cetecom advanced GmbH test report include any endorsement or warranty regarding the functionality, quality or performance of any other product or service provided. Under no circumstances does the cetecom advanced GmbH test report include or imply any product or service warranties from cetecom advanced GmbH, including, without limitation, any implied warranties of merchantability, fitness for purpose, or non-infringement, all of which are expressly disclaimed by cetecom advanced GmbH. All rights and remedies regarding vendor’s products and services for which cetecom advanced GmbH has prepared this test report shall be provided by the party offering such products or services and not by cetecom advanced GmbH. In no case this test report can be considered as a Letter of Approval. This test report is electronically signed and valid without handwritten signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. 2.2 References Guidance Version Description 47 CFR 1.1307 Actions that may have a significant environmental effect, for which Environmental Assessments (EAs) must be prepared. 47 CFR 2.1091 Radiofrequency radiation exposure evaluation: mobile devices. 47 CFR 2.1093 Radiofrequency radiation exposure evaluation: portable devices. KDB 447498 D04 v01 Interim General RF Exposure Guidance: RF Exposure Procedures and Equipment Authorization Policies for Mobile and Portable Devices 3 General RF Exposure Test Exemptions KDB 447498 D04 Interim General RF Exposure Guidance v01, section 2.1.1: RF exposure test exemptions provide means to obtain certification without the need of showing data (measurements, or analytical/numerical modeling) to demonstrate compliance. Hereafter, in this context, an RF source is referred to as “exempt RF device” in the sense that it is not required to show data demonstrating compliance to…

Text truncated - open the document above for the full version.

Test Laboratory: 7layers GmbH Borsigstrasse 11 40880 Ratingen Germany Note: The following test results relate only to the devices specified in this document. This report shall not be reproduced in part s without the written approval of the test laboratory. 7layers GmbH Geschäftsführer/ Borsigstraße 11 Managing Directors: Registergericht/registered: a Bureau Veritas 40880 Ratingen, Germany Jörg-Timm Kilisch Düsseldorf HRB 75554 Group Company T +49 (0) 2102 749 0 Bernhard Retka USt-Id.-Nr./VAT-No. DE203159652 F +49 (0) 2102 749 350 Steuer-Nr./TAX-No. 147/5869/0385 www.7layers.com Commerzbank AG Account No. 303 016 000 Bank Code 300 400 00 IBAN DE81 3004 0000 0303 0160 00 Swift Code COBADEFF FCC Measurement / Technical Report on SPECTERA DAD 1G4 FCC ID: DMODAD1G4 IC: - Test Report Reference: MDE_SENNH_2501_FCC_02 TEST REPORT REFERENCE: MDE_SENNH_2501_FCC_02 Page 2 of 48 Table of Contents 1 Applied Standards and Test Summary ........................................................................ 3 1.1 Applied Standards ............................................................................................ 3 2 Measurement Summary ............................................................................................ 4 3 Revision History ....................................................................................................... 6 4 Administrative Data .................................................................................................. 7 4.1 Testing Laboratory ........................................................................................... 7 4.2 Project Data .................................................................................................... 7 4.3 Applicant Data ................................................................................................. 7 4.4 Manufacturer Data ........................................................................................... 7 5 Test Object Data ...................................................................................................... 8 5.1 General Description of Radio Device ................................................................... 8 5.2 Tested Radio Devices ........................................................................................ 9 5.3 Tested Ancillary Equipment ............................................................................... 9 5.4 General description of auxiliary equipment .......................................................... 9 5.5 Used setups..................................................................................................... 9 5.6 Operating Modes / Test Channels ....................................................................... 9 5.7 Product labelling ............................................................................................ 10 6 Test Results…

Text truncated - open the document above for the full version.