DO4-MPOSREADERRFID UHF Reader

MOD POS READER TR4250 RFID POS READER V2 User’s Manual 10092348 Last Updated: April 29, 2014 Revision * Checkpoint Systems International GmbH Brentanostraße 27-29 69434 Hirschhorn (06272)928-0 MOD POS READER TR4250 Copyright © 2014 by Checkpoint Systems, Inc. Released April 29 Published by: Checkpoint Systems International GmbH. Brentanostraße 27-29 69434 Hirschhorn Germany RFID POS READER V2 Users Manual Part Number: 10065513 Trademarks Checkpoint is a registered trademark of Checkpoint Systems, Inc. Other product and company names herein may be trademarks of their respective owners. Other products © or ® their respective manufacturers or copyright holders. Copyright and Warranty Information The information in this guide is subject to change without notice. Because of the changing nature of this product information presented in the RFID POS READER V2 Reader Users Manual, Checkpoint Systems, Inc. is not liable for any omissions, misstatements, or other errors of information. The information presented in the Users Manual may not be copied, used or disclosed to others for the purpose of procurement or manufacturing without the written permission of Checkpoint Systems, Inc. This guide and the products discussed in this guide are the exclusive property of Checkpoint Systems Inc. Copyright laws of the United States protects all information and products. Copyright© 2011 Checkpoint Systems, Inc. All rights reserved. Checkpoint Systems Intern. GmbH Company Confidential Last Updated: 6/3/2014 11:10 AM 3 of 20 Table of contents 1 REVISION CONTROL ....................................................................................... 4 1.1 R EVISION HISTORY ........................................................................................ 4 2 BASIC SAFETY INFORMATION ............................................................................ 5 2.2 N OTE ABOUT THE DISPOSAL OF OLD UNITS ................................................................ 6 3 OPERATING INSTRUCTIONS .............................................................................. 6 3.1 I NTRODUCTION ............................................................................................ 6 3.2 I NSTALLATION ............................................................................................. 7 3.3 A CCESSORIES .............................................................................................. 8 3.3.1 Power Supply ..................................................................................... 8 3.3.2 Antennae .......................................................................................... 8 3.4 S ETUP FOR TEST AND DEMO .............................................................................. 9 3.5 B ATTERY REPLACEMENT ................................................................................. 12 4 TECHNICAL DATA ........................................................................................ 13 4.1 M ECHANICAL DATA ....................................................................................... 13 4.2 F RONT VIEW ............................................................................................. 14 4.3 R EAR VIEW ............................................................................................... 14 4.4 R EADER SPECIFICATIONS ................................................................................. 15 4.5 E NVIRONMENT SPECIFICATIONS ........................................................................... 16 4.6 D IGITAL I/O SPECIFICATION ............................................................................. 16 4.7 E THERNET LAN SPECIFICATION .......................................................................... 17 4.8 RS-232 SPECIFICATIONS ................................................................................. 17 4.9 USB SPECIFICATION ...................................................................................... 18 5 ORDERING INFORMATION .............................................................................. 19 6 GLOSSARY ................................................................................................. 19 7 ANNEX DECLARATION OF CONFORMITY ............................................................. 20 Checkpoint Systems Intern. GmbH Company Confidential For Internal Use Only Last Updated: 6/3/2014 11:10 AM 4 of 20 1 Revision Control 1.1 Revision History Content changes to this document from its previous version to the current level are indicated by Microsoft Word track changes bars (|) in the left margin of the document unless a complete rewrite is indicated. Accept all tracked changes to the current document before updating it. This procedure highlights the new changes made to the document by the author thus facilitating efficient review of the document. Revision # Revision Date Change Description and Explanation Created/Changed By * 29/04/14 Hans-Günter Meuthen Checkpoint Systems Intern. GmbH Company Confidential For Internal Use Only Last Updated: 6/3/2014 11:10 AM 5 of 20 2 Basic safety information  Read these operating instructions before using the RFID POS READER V2 for the first time! Make yourself completely familiar with the installation and operation of the RFID POS READER V2 ! Retain these operating instructions for later reference.  The RFID POS READER V2 is used for contact less reading of RFID (Radio Frequency Identification) Tags. Only use the RFID POS READER V2 in the manner described in these operating instructions!  Note all the detailed safety information given within the individual work steps. All safety information in these operating instructions is identified with the warning symbol shown here.  Never use the RFID POS READER V2 in areas where there is a danger of explosion.  Note that the electric installation of RFID POS READER V2 may only be done by a professional.  It is essential to comply with the electrical, mechanical and climatic specific…

Text truncated - open the document above for the full version.

ATTACHMENT A to File No.: T37444-01 CSA Group Bayern GmbH  Ohmstrasse 1-4  D-94342 Strasskirchen  Tel:+49-9424-9481-0  Fax:+49-9424-9481-440 Photo documentation of the EUT Testsetup: UHF Reader – External Views: ATTACHMENT A to File No.: T37444-01 CSA Group Bayern GmbH  Ohmstrasse 1-4  D-94342 Strasskirchen  Tel:+49-9424-9481-0  Fax:+49-9424-9481-440 ATTACHMENT A to File No.: T37444-01 CSA Group Bayern GmbH  Ohmstrasse 1-4  D-94342 Strasskirchen  Tel:+49-9424-9481-0  Fax:+49-9424-9481-440 PoS on Desk RFID + RF combined: ATTACHMENT A to File No.: T37444-01 CSA Group Bayern GmbH  Ohmstrasse 1-4  D-94342 Strasskirchen  Tel:+49-9424-9481-0  Fax:+49-9424-9481-440 PoS on Desk Detacher RFID only: ATTACHMENT A to File No.: T37444-01 CSA Group Bayern GmbH  Ohmstrasse 1-4  D-94342 Strasskirchen  Tel:+49-9424-9481-0  Fax:+49-9424-9481-440 PoS under Desk shielded RFID only: ATTACHMENT A to File No.: T37444-01 CSA Group Bayern GmbH  Ohmstrasse 1-4  D-94342 Strasskirchen  Tel:+49-9424-9481-0  Fax:+49-9424-9481-440 Power Supply: ATTACHMENT A to File No.: T37444-01 CSA Group Bayern GmbH  Ohmstrasse 1-4  D-94342 Strasskirchen  Tel:+49-9424-9481-0  Fax:+49-9424-9481-440 Cisco Switch: ATTACHMENT A to File No.: T37444-01 CSA Group Bayern GmbH  Ohmstrasse 1-4  D-94342 Strasskirchen  Tel:+49-9424-9481-0  Fax:+49-9424-9481-440

Model: RFID POS READER V2 06MAY14MADE INGERMANY FCC ID: DO4-MPOSREADERIC: 3356B-MPOSRDR Label for RFID POS READER V2 10112394 12 V 1A PoE class 3, 12W SN:1011239400Z1564001 Patent Numbers:US 5745036 EP 0928468 TW 396326 US 5963134 EP 0996941 CN ZL 98807426.5US 6025780 EP 1010152 CN ZL 97197874.3 US 6195006 JP 3877779 CN ZL 98807581.4 US 6693539 JP 4100867 Patents pending in US, Europe and China Print Label according to document 7373306r47CAdd Power rating as indicated in picture aboveAdd WEEE IconAdd CE IconAdd FCC ID and text below FCC IDAdd IC ID and text below IC IDAdd Patent Numbers for RFID devices

ATTACHMENT A to File No.: T37444-01 CSA Group Bayern GmbH  Ohmstrasse 1-4  D-94342 Strasskirchen  Tel:+49-9424-9481-0  Fax:+49-9424-9481-440 Internal Views: ATTACHMENT A to File No.: T37444-01 CSA Group Bayern GmbH  Ohmstrasse 1-4  D-94342 Strasskirchen  Tel:+49-9424-9481-0  Fax:+49-9424-9481-440

ATTACHMENT B to File No.: T37444-01-00HU CSA Group Bayern GmbH  Ohmstrasse 1-4  D-94342 Strasskirchen  Tel:+49-9424-9481-0  Fax:+49-9424-9481-440 Maximum permissible exposure (MPE) 1.1 For test instruments and accessories used see section 6 Part CPC 2. 1.1.1 Description of the test location Test location: AREA4 1.1.2 Applicable standard According to FCC Part 15, Section 15.247(i): Systems operating under the provisions of this section shall be operated in a manner that the public is not exposed to radio frequency energy levels in excess of the Commission’s guidelines. The test methods used comply with ANSI/IEEE C95.1, “IEEE Standard for Safety Levels with respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz”. This test report shows the compliance with the limits for Maximum Permissible Exposure (MPE) specified in FCC Part 1, Section 1.1310 and the criteria to evaluate the environmental impact of human exposure to radio- frequency (RF) radiation as specified in FCC Part 1, Section 1.1307(b). 1.1.3 Description of Measurement The maximum total power input to the antenna has been measured conducted as described in clause 5.3 of this document. Through the Friis transmission formula, the known maximum gain of the antenna and the maximum power, the MPE can be calculated in a defined distance away from the product. Friis transmission formula: P d = 2 **4 * r GP out  where P d =power density (mW/cm 2 ) P out = output power to antenna (mW) G = gain of antenna (linear scale) r = distance between antenna and observation point (cm) ATTACHMENT B to File No.: T37444-01-00HU CSA Group Bayern GmbH  Ohmstrasse 1-4  D-94342 Strasskirchen  Tel:+49-9424-9481-0  Fax:+49-9424-9481-440 1.1.4 Test result a.) Power setting 27.0 dBm Following antennas are provided with the UHF Reader:  PoS on Desk RFID only - Gain: < -10 dBi  PoS on Desk RFID + RF combined - Gain: < -10 dBi  PoS under Desk RFID only - Gain: < -10 dBi  PoS under Desk RFID + RF - Gain: < -10 dBi  PoS under Desk shielded RFID only - Gain: < -10 dBi  PoS on Desk Detacher RFID only - Gain: not applicable Channel No. Frequency Max power output to antenna Antenna gain Power density Limit of power density (MHz) (dBm) (mW) (dBi) (mW/cm 2 ) (mW/cm 2 ) 1 902.25 27.11 514.044 -10.0 0.0102 0.602 26 915.25 26.96 496.592 -10.0 0.0099 0.610 50 927.25 26.87 486.407 -10.0 0.0097 0.618 Limits for maximum permissible exposure (MPE): Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Averaging Time (minutes) (B) Limits for General Population / Uncontrolled Exposure 0.3 – 3.0 614 1.63 100 30 3.0 – 30 824/f 2.19/f 180/ f 2 30 30 - 300 27.5 0.073 0.2 30 300-1500 --- --- f/1500 30 1500-100000 --- --- 1.0 30 f = Frequency (MHz) According to FCC Rules 47CFR 2.1093(b) the EUT is not a portable device. The EUT is designed to be used that radiating structures are more than 20 cm outside of the body of the user. (r = 20 cm). Note: The manufacturer shall state in the manual the minimum cable length for each antenna. Aditionally this shall be stated on the label of the EuT. The requirements are FULFILLED. Remarks:

FCC ID: DO4-MPOSREADER CSA Group Bayern GmbH File No. T37444-01-00HU, page 1 of 58 Ohmstrasse 2-4  94342 Strasskirchen Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481440 Rev. No. 3.0, 2014-01-30 EMI − T E S T R E P O R T - FCC Part 15.247 - Test Report No. : T37444-01-00HU 17. April 2014 ______________________________________________________________________________________________ Date of issue Type / Model Name : RFID POS READER V2 Product Description : UHF RFID Reader Applicant : Checkpoint Systems Address : Brentanostr. 27 – 29 D-69434 Hirschhorn Manufacturer : RM-Gerätebau Address : Hirschbachstrasse 47 D-64354 Reinheim Licence holder : Checkpoint Systems Address : Brentanostrs. 27 – 29 D-69434 Hirschhorn Test Result according to the standards listed in clause 1 test standards: POSITIVE The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test results without the written permission of the test laboratory. FCC ID: DO4-MPOSREADER CSA Group Bayern GmbH File No. T37444-01-00HU, page 2 of 58 Ohmstrasse 2-4  94342 Strasskirchen Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481440 Rev. No. 3.0, 2014-01-30 Contents 1 T E S T S T A N D A R D S 3 2 S U M M A R Y 4 3 E Q U I P M E N T U N D E R T E S T 6 3.1 Photo documentation of the EUT – Detailed photos see Attachment A 6 3.2 Test setup 6 3.3 Power supply system utilised 6 3.4 Short description of the EUT 6 4 T E S T E N V I R O N M E N T 8 4.1 Address of the test laboratory 8 4.2 Environmental conditions 8 4.3 Statement of the measurement uncertainty 8 4.4 Measurement Protocol for FCC, VCCI and AUSTEL 9 4.5 Determination of worst case measurement conditions 9 5 T E S T C O N D I T I O N S A N D R E S U L T S 10 5.1 Conducted emissions 10 5.2 20 dB bandwidth 28 5.3 Maximum peak conducted output power 33 5.4 Spurious RF conducted emissions 35 5.5 Spurious radiated emissions 41 5.6 Hopping sequence 47 5.7 Equal hopping frequency use 48 5.8 Receiver input bandwidth 48 5.9 Dwell time 49 5.10 Channel separation 52 5.11 Quantity of hopping channels 54 5.12 Antenna application - Detailed photos see Attachment A 56 5.13 Maximum permissible exposure (MPE) – See Attachment B 57 6 U S E D T E S T E Q U I P M E N T A N D A C C E S S O R I E S 58 FCC ID: DO4-MPOSREADER CSA Group Bayern GmbH File No. T37444-01-00HU, page 3 of 58 Ohmstrasse 2-4  94342 Strasskirchen Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481440 Rev. No. 3.0, 2014-01-30 1 T E S T S T A N D A R D S The tests were performed according to following standards: FCC Rules and Regulations Part 15, Subpart A - General (October, 2013) Part 15, Subpart A, Section 15.31 Measurement standards Part 15, Subpart A, Section 15.33 Frequency range of radiated measurements Part 15, Subpart A, Section 15.35 Measurement detector functions and bandwidths FCC Rules and Regulations Part 15, Subpart B - Unintentional Radiators (October, 2013) Part 15, Subpart B, Section 15.107 AC Line conducted emissions, Part 15, Subpart B, Section 15.109 Radiated emissions, general requirements FCC Rules and Regulations Part 15, Subpart C - Intentional Radiators (October, 2013) Part 15, Subpart C, Section 15.203 Antenna requirement Part 15, Subpart C, Section 15.204 External radio frequency power amplifiers and antenna modifications Part 15, Subpart C, Section 15.205 Restricted bands of operation Part 15, Subpart C, Section 15.207 Conducted limits Part 15, Subpart C, Section 15.209 Radiated emission limits, general requirements Part 15, Subpart C, Section 15.247 Operation within the bands 902 - 928 MHz, 2400 - 2483.5 MHz and 5725 - 5850 MHz FCC Rules and Regulations Part 1, Subpart I - Procedures Implementing the National Environmental Policy Act of 1969 Part 1, Subpart I, Section 1.1310 Radiofrequency radiation exposure limits Part 1, Subpart 2, Section 2.1093 Radiofrequency radiation exposure evaluation: portable device OET Bulletin 65, 65A, 65B, 65C Edition 97-01, August 1997 – Evaluating Compliance with FCC Guidelines for Human Exposure to Radio Frequency Electromagnetic Fields. ANSI C63.10: 2009 Testing Unlicensed Wireless Devices ANSI C95.1:1992 IEEE Standard for Safety Levels with respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz CISPR 16-4-2: 2003 Uncertainty in EMC measurement CISPR 22: 2005 Information technology equipment EN 55022: 2006 FCC ID: DO4-MPOSREADER CSA Group Bayern GmbH File No. T37444-01-00HU, page 4 of 58 Ohmstrasse 2-4  94342 Strasskirchen Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481440 Rev. No. 3.0, 2014-01-30 2 S U M M A R Y GENERAL REMARKS: The frequency range was scanned from 9 kHz to 10 GHz. All emissions not reported in this test report were more than 10 dB below the specified limit. The EuT is a frequency hopping system using 50 channels in the frequency band from 902 to 928 MHz. Following antennas are provided with the UHF Reader:  PoS on Desk RFID only - Gain: < -10 dB  PoS on Desk RFID + RF combined - Gain: < -10 dB  PoS under Desk RFID only - Gain: < -10 dB  PoS under Desk RFID + RF - Gain: < -10 dB  PoS under Desk shielded RFID only - Gain: < -10 dB  PoS on Desk Detacher RFID only - Gain: not applicable For detailed information about the model and the antennas please refer to the user manual. It is not possible to set the EuT only in receiving mode. Screenshot of the supportet test software: FCC ID: DO4-MPOSREADER CSA Group Bayern GmbH File No. T37444-01-00HU, page 5 of 58 Ohmstrasse 2-4  94342 Strasskirchen Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481440 Rev. No. 3.0, 2014-01-30 FINAL ASSESSMENT: The equipment under test fulfills the EMI requirements cited in clause 1 test standards. Date of receipt of test sample : acc. to storage records Testing commenced on : 17. March 2014 Testing concluded on : 10. April 2014 Checked by: Tested by: Eduard Stangl Technical Director Markus Huber FCC ID: DO4-MPOSREADER CSA Group Bayern GmbH File No. T37444-01-00HU, page 6 of 58 Ohmstrasse 2-4  94342 Strasskirchen Tel.:+49(0)9…

Text truncated - open the document above for the full version.

ATTACHMENT A to File No.: T37444-01 CSA Group Bayern GmbH  Ohmstrasse 1-4  D-94342 Strasskirchen  Tel:+49-9424-9481-0  Fax:+49-9424-9481-440 Photo documentation of the EUT Testsetup: UHF Reader – External Views: