DO4LIB82Liberty DX

Page 1 of 1 VOJTZT! ! PCTC Product Compliance Test Center 2476 Swedesford Road, Malvern, PA 19355 25 June 2003 20030616L Federal Communications Commission EQUIPMENT APPROVAL SERVICES P.O Box 358315 Pittsburgh, PA 15251-5315 Subject: User’s Manual for Liberty DX with TR4022(2/8) PCB Control Board Dear Sir/Madam: Checkpoint Systems, Inc., the manufacturer of the Liberty DX with a TR4022(2/8) PCB Control Board, FCC ID DO4LIB82, normally does not supply a User’s or Operators Manual with this product. Customers are provided with on-site training in the general use and operation of the device during installation of the equipment. Sincerely, Daniel J. Mis Technical Staff Engineer Unisys Corpration (610) 648-3746 E-Mail: [email protected]

Page 1 of 1 VOJTZT! ! PCTC Product Compliance Test Center 2476 Swedesford Road, Malvern, PA 19355 25 June 2003 20030617CL Federal Communications Commission EQUIPMENT APPROVAL SERVICES P.O Box 358315 Pittsburgh, PA 15251-5315 Subject: Confidentiality Statement for Checkpoint Systems Strata FX System. Dear Sir/Madam: The Checkpoint Systems, Liberty DX, FCC ID DO4LIB82, (frequency bands of 1.9 MHz to 2.7 MHz and 7.6 MHz to 8.7 MHz) was tested for EMI compliance for operating according to the FCC Part 15 Sections 15.207, 15.209 and 15.223 requirements. Based on the compliance results of this test, please register the Checkpoint System Liberty DX, DO4LIB82, with the Federal Communications Commission. Please note that Checkpoint requests confidentiality on the block diagram, theory of operation, parts list/tune up procedure and schematics of the Liberty DX. Checkpoint considers these items to be company confidential and it is their desire that access to these items, by their competitors, be restricted. Sincerely, Daniel J. Mis Technical Staff Engineer Unisys Corpration (610) 648-3746 E-Mail: [email protected]

Page 1 of 1 VOJTZT! ! PCTC Product Compliance Test Center 2476 Swedesford Road, Malvern, PA 19355 14 August 2003 20030617CL Federal Communications Commission EQUIPMENT APPROVAL SERVICES P.O Box 358315 Pittsburgh, PA 15251-5315 Subject: Confidentiality Statement for Checkpoint Systems Liberty DX System. Dear Sir/Madam: The Checkpoint Systems, Liberty DX, FCC ID DO4LIB82, (frequency bands of 1.9 MHz to 2.7 MHz and 7.6 MHz to 8.7 MHz) was tested for EMI compliance for operating according to the FCC Part 15 Sections 15.207, 15.209 and 15.223 requirements. Based on the compliance results of this test, please register the Checkpoint System Liberty DX, DO4LIB82, with the Federal Communications Commission. Please note that Checkpoint requests confidentiality on the block diagram, theory of operation, tuning procedure and schematics of the Liberty DX. Checkpoint considers these items to be company confidential and it is their desire that access to these items, by their competitors, be restricted. Sincerely, Daniel J. Mis Technical Staff Engineer Unisys Corpration (610) 648-3746 E-Mail: [email protected]

PHOTO 1 – FRONT VIEW OF LIBERTY DX PHOTO 2 – FRONT VIEW LIBERTY DX WITH LOWER COVER REMOVED PHOTO 3 – REAR VIEW LIBERTY DX WITH LOWER COVER REMOVED PHOTO 4 – FRONT VIEW OF LIBERTY DX POWER SUPPLY PHOTO 5 – REAR VIEW OF LIBERTY DX POWER SUPPLY PHOTO 6 – SIDE VIEW LIBERTY DX POWER SUPPLY

PHOTO 1 – LOWER DETAIL OF LIBERTY DX WITH EXTERNAL DRESS COVER REMOVED PHOTO 2 – TOP VIEW OF LIBERTY DX CONTROL MODULE HOUSING PHOTO 3 – BOTTOM VIEW OF LIBERTY DX CONTROL MODULE HOUSING PHOTO 4 – INSIDE VIEW OF CONTROL MODULE TOP COVER PHOTO 5 – VIEW OF CONTROL PCB MOUNTING IN HOUSING PHOTO 6 – INSIDE OF CONTROL MODULE HOUSING WITH PCB REMOVED PHOTO 7 – TOP SIDE OF LIBERTY DX CONTROL PCB PHOTO 8 – BOTTOM SIDE OF LIBERTY DX CONTROL PCB

VOJTZT! ! PCTC Product Compliance Test Center 2476 Swedesford Road, Malvern, PA 19355 ELECTROMAGNETIC INTERFERENCE TEST REPORT Doc.20030618R / Project No. 953 TEST STANDARD - USA CFR 47 PART 15 LIBERTY DX ELECTRONIC ARTICLE SURVEILANCE DETECTION SYSTEM FCC ID: DO4LIB82 CHECKPOINT SYSTEMS, INC. THOROFARE, NJ Test Date: 27 May to 12 June 2003 Issue: 25 June 2003 Prepared by: Daniel J. Mis Technical Staff Engineer Approved by: John Baumeister Group Manager, PCTC/ICC The results described in this report relate only to the item(s) tested. This document shall not be reproduced except in full without written permission of Unisys - PCTC. AMERICAN ASSOCIATION FOR LABORATORY ACCREDITATION Cert. No.: 1028-01 ! VOJTZT! PCTC Page 2 of 40, 25 June 2003 Product Compliance Test Center Doc.20030618R / Project No. 953 FCC ID: DO4LIB82 PREFACE This report documents product testing conducted to verify compliance of the specified EUT with applicable standards and requirements as identified herein. EUT, test instrument configurations, test procedures and recorded data are generally described or attached in the appendices of this report. The reader is referred to the applicable test standards for detailed procedures. The following table summarizes the test results obtained during this evaluation. SUMMARY The Checkpoint Systems, Inc., Liberty DX as described in Section 2.1, was tested to the standards listed below, and found to have the following characteristics: TEST STANDARD Frequency Range RESULT Radiated Emissions Intentional Radiator, Fundamental FCC Part 15.223 1.705 to 10 MHz Below Max. Permissible Limit Radiated Emissions Intentional Radiator, Harmonics FCC Part 15.209 10 MHz to 1 GHz Below Max. Permissible Limit Radiated Emissions Unintentional Radiator (Related to Digital Circuitry) FCC Part 15.109 30 MHz to 1 GHz Below Max. Permissible Limit Conducted Emissions Unintentional & Intentional Radiators FCC Part 15.209 450 kHz to 30 MHz Below Max. Permissible Limit VOJTZT! PCTC Page 3 of 40, 25 June 2003 Product Compliance Test Center Doc.20030618R / Project No. 953 FCC ID: DO4LIB82 TABLE OF CONTENTS 1.0 Client Information ................................................................................................................. 5 1.1 Requested Service ......................................................................................................................................... 5 1.2 Purpose of Test(s) ......................................................................................................................................... 5 2.0 Description of The Equipment Under Test (EUT) ................................................................ 6 2.1 Equipment Family Description...................................................................................................................... 6 2.1.1 General .................................................................................................................................................. 6 2.2 Equipment Sample ........................................................................................................................................ 7 2.2.1 Identification ......................................................................................................................................... 7 2.2.2 Condition of Received Sample .............................................................................................................. 9 3.0 Applicable Requirements, Methods And Procedures............................................................ 9 3.1 Applicable Requirements .............................................................................................................................. 9 3.1.1 USA..................................................................................................................................................... 10 3.2 Basic Test Methods and Procedures............................................................................................................ 10 4.0 Deviations or Exclusions from the Requirements and Standards ....................................... 10 5.0 Operation of the EUT during Testing.................................................................................. 11 5.1 Test Environment ........................................................................................................................................ 11 5.1.1 Climatic Environment ......................................................................................................................... 11 5.1.2 Electrical Power .................................................................................................................................. 11 5.2 Grounding ................................................................................................................................................... 11 5.3 Operating Mode .......................................................................................................................................... 11 5.3.1 Operation in Restricted Bands............................................................................................................. 12 5.4 Test Configurations ..................................................................................................................................... 13 5.4.1 EUT Details......................................................................................................................................... 15 5.4.1 Support Equipment.............................................................................................................................. 15 5.5 EUT Modifications...................................................................................................................................... 15 6.0 Summary Of Test Results.................................................................................................…

Text truncated - open the document above for the full version.

PHOTO 1 – LIBERTY DX FRONT VIEW OF TEST SETUP FOR REDIATED EMISSIONS PHOTO 2 – LIBERTY DX REAR VIEW OF RADIATED EMISSIONS TEST SETUP PHOTO 3 – LIBERTY DX SIDE VIEW OF RADIATED EMISSIONS TEST SETUP

Photo 1 – LIBERTY DX – CONDUCTED EMISSIONS TEST SETUP