DO4WRTZ2000UHF RFID Reader

Draft Integration Manual Modular Transmitter WRTZ-2000 - These statements will be component parts of the final integration manual – This device has been designed to operate with no more than 1 Watt into the antenna and an antenna gain of no more than 6 dBic. Antenna having a higher gain is strictly prohibited per regulations of Industry Canada, unless power into the antenna is decreased to compensate for the increased antenna gain. The required antenna impedance is 50 ohms. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropic radiated power (EIRP) is not more than that required for successful communication. The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit an RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada’s website at www.hc-sc.gc.ca Only following tested antenna may be used: PAM9158UN1CP01SK110MM: circular, 68° vertical, 70° horizontal (4.5 dBic). Checkpoint part number of 2 antennae assembled on metal sheet is 10075954. RF-Exposure compliance: This module complies with the FCC/IC SAR requirements and is not intended to be operated within 20cm of the body. The following statement must be included as a CAUTION statement in manuals for OEM products to alert users on FCC/IC RF exposure compliance: "WARNING: To satisfy FCC/IC RF exposure requirements for mobile transmitting devices, a separation distance of 20cm or more should be maintained between the antenna of this device and persons during operation. To ensure compliance, operations at closer distances than this are not recommended." Label requirements: The module carry FCC and IC authorization and is marked with the FCC ID /IC-Number. Whilst any device into which this authorized module is installed will not normally be required to obtain FCC/IC authorization, this does not preclude the possibility that some other form of authorization or testing may be required for the finished device. When the module is integrated inside another device/product, then the outside surface of that device/product must display a label referring to the enclosed module. This exterior label can use wording such as "Contains Transmitter Module FCC ID: DO4WRTZ2000/Contains Transmitter Module IC: 3356B-WRTZ2000" or "Contains FCC ID: DO4WRTZ2000/Contains IC: 3356B-WRTZ2000" although any similar wording that expresses the same meaning may be used. FCC Statements: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Canada Statements: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. Illustratration of integration will be displayed in the final version

UHF-RFID READER WRTZ-2000 UHF-RFID Reader WRTZ-2000 User’s Manual 10058016 Last Updated: February 4, 2015 Revision 00 Checkpoint Systems International GmbH Brentanostrasse 27-29 69434 Hirschhorn (06272)928-0 UHF-RFID READER WRTZ-2000 Copyright © 2015 by Checkpoint Systems, Inc. Released February 15 Published by: Checkpoint Systems International GmbH. Brentanostrasse 27-29 69434 Hirschhorn Germany UHF-RFID Reader WRTZ-2000 Users Manual Part Number: 10078784 Trademarks Checkpoint is a registered trademark of Checkpoint Systems, Inc. Other product and company names herein may be trademarks of their respective owners. Other products © or ® their respective manufacturers or copyright holders. Copyright and Warranty Information The information in this guide is subject to change without notice. Because of the changing nature of this product information presented in the UHF-RFID Reader WRTZ-2000 Users Manual, Checkpoint Systems, Inc. is not liable for any omissions, misstatements, or other errors of information. The information presented in the Users Manual may not be copied, used or disclosed to others for the purpose of procurement or manufacturing without the written permission of Checkpoint Systems, Inc. This guide and the products discussed in this guide are the exclusive property of Checkpoint Systems Inc. Copyright laws of the United States protects all information and products. Copyright© 2015 Checkpoint Systems, Inc. All rights reserved. Checkpoint Systems Intern. GmbH Company Confidential Last Updated: 2/9/2015 11:59 AM 3 of 16 Table of contents 1 REVISION CONTROL ...................................................................................... 4 1.1 REVISION HISTORY ....................................................................................... 4 2 BASIC SAFETY INFORMATION ........................................................................... 5 2.2 NOTE ABOUT THE DISPOSAL OF OLD UNITS ............................................................... 6 3 INTRODUCTION ........................................................................................... 7 3.1 I NSTALLATION ........................................................................................... 8 4 TECHNICAL DATA ......................................................................................... 9 4.1 MECHANICAL DATA ...................................................................................... 9 4.2 FRONT VIEW ............................................................................................ 10 4.3 SIDE VIEW .............................................................................................. 10 4.4 R EAR VIEW ............................................................................................. 10 4.5 READER SPECIFICATIONS ................................................................................ 11 4.6 ENVIRONMENT SPECIFICATIONS ......................................................................... 11 4.7 DIGITAL INPUT SPECIFICATION .......................................................................... 12 4.8 INTERPEDESTAL IN SPECIFICATION ...................................................................... 12 4.9 I NTERPEDESTAL OUT SPECIFICATION ................................................................... 12 4.10 ETHERNET LAN SPECIFICATION ......................................................................... 13 4.11 RS-232 SPECIFICATIONS ................................................................................ 13 4.12 LAMP PED 1 SPECIFICATION ........................................................................... 14 4.13 LAMP CENTER SPECIFICATION ........................................................................ 14 4.14 LAMP PED 2 SPECIFICATION ........................................................................... 14 4.15 KEY SWITCH .......................................................................................... 14 4.16 B UZZER ................................................................................................ 14 5 ORDERING INFORMATION ............................................................................. 15 6 GLOSSARY ............................................................................................... 16 7 ANNEX DECLARATION OF CONFORMITY ............................................................ 16 Checkpoint Systems Intern. GmbH Company Confidential For Internal Use Only Last Updated: 2/9/2015 11:59 AM 4 of 16 1 Revision Control 1.1 Revision History Content changes to this document from its previous version to the current level are indicated by Microsoft Word track changes bars (|) in the left margin of the document unless a complete rewrite is indicated. Accept all tracked changes to the current document before updating it. This procedure highlights the new changes made to the document by the author thus facilitating efficient review of the document. Revision # Revision Date Change Description and Explanation Created/Changed By 00 02/04/15 CR2648 Hans-Günter Meuthen Checkpoint Systems Intern. GmbH Company Confidential For Internal Use Only Last Updated: 2/9/2015 11:59 AM 5 of 16 2 Basic safety information • Read these operating instructions before using the UHF-RFID READER WRTZ- 2000 for the first time! Make yourself completely familiar with the installation and operation of the UHF-RFID READER WRTZ-2000! Retain these operating instructions for later reference. • The UHF-RFID READER WRTZ-2000 is used for contact less reading of RFID (Radio Frequency Identification) Tags. Only use the UHF-RFID READER WRTZ-2000 in the manner described in these operating instructions! • Note all the detailed safety information given within the individual work steps. All safety information in these operating instructions is identified with the warning symbol shown here. • Never use the UHF-RFID READER WRTZ-2000 in areas where there is a danger of explosion. • Note that the electric …

Text truncated - open the document above for the full version.

Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 10.02.2015 Request for a Modular Approval - FCC ID: DO4WRTZ2000 Dear Sirs, Our client’s module with the above FCC ID is seeking FCC authorization as a Modular transmitter. The requirements of the FCC Public notice DA00-1407 and KDB 996369 are met. Please see the following comments: Please contact us if you have any additional questions. Item Requirements EUT 1 Have its own RF shielding Device is equipped with metal shielding to cover RF section. Refer to external photos 2 Have buffered modulation/data inputs (if such inputs are provided), The EUT has buffered data inputs. It is integrated in PCB system TR4221. 3 Have it own power supply regulation 12 V DC: Refer to block diagram. 4 Meet the antenna requirements of Section 15.203 Module installation in hosts will require professional installation. 5 Be tested in a stand-alone configuration, i.e., the antenna, AC or DC power and data input/output lines must be connected to the module but, the module must not be inside another case during testing Device was tested in a stand-alone configuration on a Test Jig. Refer to setup photos & internal photos. 6 Be labelled with its own FCC ID number, and if the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. The module has its own label. Refer to FCC ID label format and location file. 7 The modular transmitter is manufactured so that the user cannot influence the operation of the transmitter that will operate outside of the scope of the regulations. Module installation in hosts will require professional installation, therefore the user cannot influence the operation of the transmitter 8 Compliance with RF exposure requirements is the responsibility of the grantee and will be addressed for all final host configurations Refer to “MPE Exhibit Thomas Ring / Manager Certification / CSA Group Bayern GmbH Ohmstr. 1-4, 94342 Strasskirchen, Germany Phone: +49 9424 9481 250, Email: [email protected]

ATTACHMENT A to File No.: T39158-00 CSA Group Bayern GmbH Attachment A to File No. T39158-00HU, page 1 of 13 Ohmstrasse 2-4  94342 Strasskirchen Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481440 Photo documentation of the EUT Model: WRTZ-2000 External Views: ATTACHMENT A to File No.: T39158-00 CSA Group Bayern GmbH Attachment A to File No. T39158-00HU, page 2 of 13 Ohmstrasse 2-4  94342 Strasskirchen Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481440 ATTACHMENT A to File No.: T39158-00 CSA Group Bayern GmbH Attachment A to File No. T39158-00HU, page 13 of 13 Ohmstrasse 2-4  94342 Strasskirchen Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481440 Power supply unit:

Label Location

Model: WRTZ-2000 RDR 11 FEB 15MADE INCHINA FCC ID: DO4WRTZ2000IC:3356B-WRTZ2000 Label for RFID POS READER V2 (CPiD RFID 400 RDR) SN: 10112394 12 V 2.7A SN:1011239402W0445001 Patent Numbers:US 5745036 EP 0928468 TW 396326 US 5963134 EP 0996941 CN ZL 98807426.5US 6025780 EP 1010152 CN ZL 97197874.3 US 6195006 JP 3877779 CN ZL 98807581.4 US 6693539 JP 4100867 Patents pending in US, Europe and China Print Label according to document 7373306r56Add Power rating as indicated in picture aboveAdd WEEE IconAdd CE IconAdd FCC ID and text below FCC IDAdd IC ID and text below IC IDAdd Patent Numbers for RFID devicesAdd UL MarkAdd Japan Radio MarkAdd Australien Radio Mark N13015

ATTACHMENT A to File No.: T39158-00 CSA Group Bayern GmbH Attachment A to File No. T39158-00HU, page 3 of 13 Ohmstrasse 2-4  94342 Strasskirchen Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481440 Internal Views: ATTACHMENT A to File No.: T39158-00 CSA Group Bayern GmbH Attachment A to File No. T39158-00HU, page 4 of 13 Ohmstrasse 2-4  94342 Strasskirchen Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481440 ATTACHMENT A to File No.: T39158-00 CSA Group Bayern GmbH Attachment A to File No. T39158-00HU, page 5 of 13 Ohmstrasse 2-4  94342 Strasskirchen Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481440 ATTACHMENT A to File No.: T39158-00 CSA Group Bayern GmbH Attachment A to File No. T39158-00HU, page 6 of 13 Ohmstrasse 2-4  94342 Strasskirchen Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481440 ATTACHMENT A to File No.: T39158-00 CSA Group Bayern GmbH Attachment A to File No. T39158-00HU, page 7 of 13 Ohmstrasse 2-4  94342 Strasskirchen Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481440 ATTACHMENT A to File No.: T39158-00 CSA Group Bayern GmbH Attachment A to File No. T39158-00HU, page 8 of 13 Ohmstrasse 2-4  94342 Strasskirchen Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481440 ATTACHMENT A to File No.: T39158-00 CSA Group Bayern GmbH Attachment A to File No. T39158-00HU, page 9 of 13 Ohmstrasse 2-4  94342 Strasskirchen Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481440 Antenna FCC: ATTACHMENT A to File No.: T39158-00 CSA Group Bayern GmbH Attachment A to File No. T39158-00HU, page 10 of 13 Ohmstrasse 2-4  94342 Strasskirchen Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481440 ATTACHMENT A to File No.: T39158-00 CSA Group Bayern GmbH Attachment A to File No. T39158-00HU, page 11 of 13 Ohmstrasse 2-4  94342 Strasskirchen Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481440 Antenna FCC: ATTACHMENT A to File No.: T39158-00 CSA Group Bayern GmbH Attachment A to File No. T39158-00HU, page 12 of 13 Ohmstrasse 2-4  94342 Strasskirchen Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481440

ATTACHMENT B to File No.: T39158-00-08HU CSA Group Bayern GmbH Attachment B to File No. T39158-00-08HU, page 1 of 2 Ohmstrasse 2-4  94342 Strasskirchen Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481440 Maximum permissible exposure (MPE) 1.1 For test instruments and accessories used see section 6 Part CPC 2. 1.1.1 Description of the test location Test location: Shielded room S4 1.1.2 Applicable standard According to FCC Part 15, Section 15.247(i): Systems operating under the provisions of this section shall be operated in a manner that the public is not exposed to radio frequency energy levels in excess of the Commission’s guidelines. The test methods used comply with ANSI/IEEE C95.1, “IEEE Standard for Safety Levels with respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz”. This test report shows the compliance with the limits for Maximum Permissible Exposure (MPE) specified in FCC Part 1, Section 1.1310 and the criteria to evaluate the environmental impact of human exposure to radio- frequency (RF) radiation as specified in FCC Part 1, Section 1.1307(b). 1.1.3 Description of Measurement The maximum total power input to the antenna has been measured conducted as described in clause 5.3 of this document. Through the Friis transmission formula, the known maximum gain of the antenna and the maximum power, the MPE can be calculated in a defined distance away from the product. Friis transmission formula: P d = 2 **4 * r GP out  where P d =power density (mW/cm 2 ) P out = output power to antenna (mW) G = gain of antenna (linear scale) r = distance between antenna and observation point (cm) ATTACHMENT B to File No.: T39158-00-08HU CSA Group Bayern GmbH Attachment B to File No. T39158-00-08HU, page 2 of 2 Ohmstrasse 2-4  94342 Strasskirchen Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481440 1.1.4 Test result a.) Power setting 30.0 dBm = Antenna gain: 4.5 dBi Channel No. Frequency Max power output to antenna Antenna gain Power density Limit of power density (MHz) (dBm) (mW) (dBi) (mW/cm 2 ) (mW/cm 2 ) 1 902.75 23.18 207.970 4.5 0.1166 0.602 26 914.75 22.79 190.108 4.5 0.1066 0.610 50 927.25 22.57 180.717 4.5 0.1013 0.618 According to FCC Rules 47CFR 2.1093(b) the EUT is not a portable device. The EUT is designed to be used that radiating structures are more than 20 cm outside of the body of the user. (r = 20 cm). Limits for maximum permissible exposure (MPE): Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Averaging Time (minutes) (B) Limits for General Population / Uncontrolled Exposure 0.3 – 3.0 614 1.63 100 30 3.0 – 30 824/f 2.19/f 180/ f 2 30 30 - 300 27.5 0.073 0.2 30 300-1500 --- --- f/1500 30 1500-100000 --- --- 1.0 30 f = Frequency (MHz) Note: The manufacturer shall state in the manual the minimum cable length for each antenna. Aditionally this shall be stated on the label of the EuT. The requirements are FULFILLED. Remarks:

FCC ID: DO4WRTZ2000 CSA Group Bayern GmbH File No. T39158-00-08HU, page 1 of 46 Ohmstrasse 2-4  94342 Strasskirchen Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481440 Rev. No. 4.0, 2015-04-17 EMI − T E S T R E P O R T - FCC 15.247 - Type / Model Name : WRTZ-2000 Product Description : UHF RFID Reader Applicant : Checkpoint Sytems Address : Brentanostr. 27 - 29 D-69434 Hirschhorn Manufacturer : Checkpoint Systems Inc. Address : 101 Wolf Drive, Thorofare New Jersey, USA 08086 Licence holder : Checkpoint Sytems Address : Brentanostr. 27 - 29 D-69434 Hirschhorn Test Result according to the standards listed in clause 1 test standards: POSITIVE Test Report No. : T39158-00-08HU 28. April 2015 ______________________________________________________________________________________________ Date of issue The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test results without the written permission of the test laboratory. FCC ID: DO4WRTZ2000 CSA Group Bayern GmbH File No. T39158-00-08HU, page 2 of 46 Ohmstrasse 2-4  94342 Strasskirchen Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481440 Rev. No. 4.0, 2015-04-17 Contents 1 T E S T S T A N D A R D S 3 2 S U M M A R Y 4 3 E Q U I P M E N T U N D E R T E S T 5 3.1 Photo documentation of the EUT – Detailed photos see Attachment A 5 3.2 Test setup 5 3.3 Power supply system utilised 5 3.4 Short description of the EUT 5 4 T E S T E N V I R O N M E N T 7 4.1 Address of the test laboratory 7 4.2 Statement regarding the usage of logos in test reports 7 4.3 Environmental conditions 7 4.4 Statement of the measurement uncertainty 7 4.5 Measurement Protocol for FCC, VCCI and AUSTEL 8 5 T E S T C O N D I T I O N S A N D R E S U L T S 9 5.1 Conducted emissions 9 5.2 20 dB bandwidth 17 5.3 Maximum peak conducted output power 21 5.4 Spurious RF conducted emissions 23 5.5 Spurious radiated emissions 29 5.6 Hopping sequence 35 5.7 Equal hopping frequency use 36 5.8 Receiver input bandwidth 36 5.9 Dwell time 37 5.10 Channel separation 40 5.11 Quantity of hopping channels 42 5.12 Antenna application 44 5.13 Maximum permissible exposure (MPE) – See Attachment B 45 6 U S E D T E S T E Q U I P M E N T A N D A C C E S S O R I E S 46 FCC ID: DO4WRTZ2000 CSA Group Bayern GmbH File No. T39158-00-08HU, page 3 of 46 Ohmstrasse 2-4  94342 Strasskirchen Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481440 Rev. No. 4.0, 2015-04-17 1 T E S T S T A N D A R D S The tests were performed according to following standards: FCC Rules and Regulations Part 15, Subpart A - General (October, 2014) Part 15, Subpart A, Section 15.31 Measurement standards Part 15, Subpart A, Section 15.33 Frequency range of radiated measurements Part 15, Subpart A, Section 15.35 Measurement detector functions and bandwidths FCC Rules and Regulations Part 15, Subpart B - Unintentional Radiators (October, 2014) Part 15, Subpart B, Section 15.107 AC Line conducted emissions, Part 15, Subpart B, Section 15.109 Radiated emissions, general requirements FCC Rules and Regulations Part 15, Subpart C - Intentional Radiators (October, 2014) Part 15, Subpart C, Section 15.203 Antenna requirement Part 15, Subpart C, Section 15.204 External radio frequency power amplifiers and antenna modifications Part 15, Subpart C, Section 15.205 Restricted bands of operation Part 15, Subpart C, Section 15.207 Conducted limits Part 15, Subpart C, Section 15.209 Radiated emission limits, general requirements Part 15, Subpart C, Section 15.247 Operation within the bands 902 - 928 MHz, 2400 - 2483.5 MHz and 5725 - 5850 MHz FCC Rules and Regulations Part 1, Subpart I - Procedures Implementing the National Environmental Policy Act of 1969 Part 1, Subpart I, Section 1.1310 Radiofrequency radiation exposure limits Part 1, Subpart 2, Section 2.1093 Radiofrequency radiation exposure evaluation: portable device OET Bulletin 65, 65A, 65B, 65C Edition 97-01, August 1997 – Evaluating Compliance with FCC Guidelines for Human Exposure to Radio Frequency Electromagnetic Fields. ANSI C63.10: 2009 Testing Unlicensed Wireless Devices ANSI C95.1:1992 IEEE Standard for Safety Levels with respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz CISPR 16-4-2: 2003 Uncertainty in EMC measurement CISPR 22: 2005 Information technology equipment EN 55022: 2006 FCC ID: DO4WRTZ2000 CSA Group Bayern GmbH File No. T39158-00-08HU, page 4 of 46 Ohmstrasse 2-4  94342 Strasskirchen Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481440 Rev. No. 4.0, 2015-04-17 2 S U M M A R Y GENERAL REMARKS: The frequency range was scanned from 9 kHz to 10 GHz. All emissions not reported in this test report were more than 10 dB below the specified limit. The EuT is a frequency hopping system using 50 channels in the frequency band from 902 to 928 MHz. The device transmits to each antenna in turn (not all at the same time). This function is controlled via software from the manufacturer and can not changed from the user. All radiated tests were performed with following antenna type and power supply: - Antenna: PAM915UN1CP01SK110MM - Power supply: XP Power AEB70US12 This equipment was provided by the manufacturer for testing. For detailed information about the UHF RFID Reader and the antennas please refer to the user manual. The EuT is declared as Class B digital device. It is not possible to set the EuT only in receiving mode. FINAL ASSESSMENT: The equipment under test fulfills the EMI requirements cited in clause 1 test standards. Date of receipt of test sample : acc. to storage records Testing commenced on : 10. December 2014 Testing concluded on : 16. March 2015 Checked by: Tested by: Klaus Gegenfurtner Teamleader Radio Markus Huber FCC ID: DO4WRTZ2000 CSA Group Bayern GmbH File No. T39158-00-08HU, page 5 of 46 Ohmstrasse 2-4  94342 Strasskirchen Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481440 Rev. No. 4.0, 2015-04-17 3 E Q U I P M E N T U N D E R T E S T 3.1 Photo documentation of the EUT – Detailed photos see Attachment A 3.2 Test s…

Text truncated - open the document above for the full version.

ATTACHMENT C to File No.: T39158-00HU CSA Group Bayern GmbH Attachment C to File No. T39158-00HU, page 1 of 5 Ohmstrasse 2-4  94342 Strasskirchen Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481440 Photo documentation – Test Setup Model: WRTZ-2000 - Conducted Emission – A4: - 20 dB bandwidth / Occupied bandwidth - MB: ATTACHMENT C to File No.: T39158-00HU CSA Group Bayern GmbH Attachment C to File No. T39158-00HU, page 2 of 5 Ohmstrasse 2-4  94342 Strasskirchen Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481440 - Maximum peak conducted output power – CPC 2: - Spurious RF conducted emissions – SEC1, SEC2 and SEC3: - Spurious radiated emissions – SER1, SER2, SER3: ATTACHMENT C to File No.: T39158-00HU CSA Group Bayern GmbH Attachment C to File No. T39158-00HU, page 3 of 5 Ohmstrasse 2-4  94342 Strasskirchen Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481440 ATTACHMENT C to File No.: T39158-00HU CSA Group Bayern GmbH Attachment C to File No. T39158-00HU, page 4 of 5 Ohmstrasse 2-4  94342 Strasskirchen Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481440 - Dwell time – DC: - Channel separation - MB: - Quantity of hopping channels – MB: ATTACHMENT C to File No.: T39158-00HU CSA Group Bayern GmbH Attachment C to File No. T39158-00HU, page 5 of 5 Ohmstrasse 2-4  94342 Strasskirchen Tel.:+49(0)9424-94810  Fax:+49(0)9424-9481440 - Data connection UHF Reader / Laptop