E2K-APL260AEAccess Point

Dell SonicWALL SonicPoint-ACe Getting Started Guide Draft Document © 2014 Dell Inc. ALL RIGHTS RESERVED. This guide contains proprietary information protected by copyright. The software described in this guide is furnished under a software license or nondisclosure agreement. This software may be used or copied only in accordance with the terms of the applicable agreement. No part of this guide may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording for any purpose other than the purchaser’s personal use without the written permission of Dell Inc. The information in this document is provided in connection with Dell products. No license, express or implied, by estoppel or otherw ise, to any intellectual property right is granted by this document or in connection with the sale of Dell products. EXCEPT AS SET FORTH IN THE TERMS AND CONDITIONS AS SPECIFIED IN THE LICENSE AGREEMENT FOR THIS PRODUCT, DELL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL DELL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION OR LOSS OF INFORMATION) ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF DELL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Dell makes no representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and product descriptions at any time without notice. Dell does not make any commitment to update the information contained in this document. If you have any questions regarding your potential use of this material, contact: Dell Inc. Attn: LEGAL Dept 5 Polaris Way Aliso Viejo, CA 92656 Refer to our web site (software.dell.com) for regional and international office information. Trademarks Dell™, the DELL logo, SonicWALL™, and all other SonicWALL product and service names and slogans are trademarks of Dell, Inc. Other product and company names mentioned herein may be trademarks and/or registered trademarks of their respective companies and are the sole property of their respective manufacturers. SonicPoint-ACe Getting Started Guide Updated - 12 – 2014 Software Version - Rev. 00 P/N 232-00XXXX-XX Legend CAUTION: A CAUTION icon indicates potential damage to hardware or loss of data if instructions are not followed. WARNING: A WARNING icon indicates a potential for property damage, personal injury, or death. IMPORTANT NOTE, NOTE, TIP, MOBILE, or VIDEO: An information icon indicates supporting information. Draft Document | 1 In this guide This Getting Started Guide provides instructions for basic inst allation and configuration of the De ll SonicWALL SonicPoi nt-ACe wireless appliances in single-unit or distributed wireless deployments. Chapter 1 Sections Include Before you begin, page 3 • Check package contents, page 4 • What you need to begin, page 5 • SonicPoint top panel/status LEDs, page 6 Chapter 2 Sections Include Introduction to secure wireless, page 7 • Wireless RF introduction, page 8 • Placing access points, page 10 • Dell SonicWALL wireless firewalling, page 13 Chapter 3 Sections Include Registering your appliance, page 15 • Creating a MySonicWALL account, page 16 • Registering and licensing your appliance on MySonicWALL, page 16 • Using Dell SonicWALL security services for wireless clients, page 17 SonicPoint_ACe_GSG.book Page 1 Monday, September 29, 2014 5:23 PM Draft Document 2 | Additional informationThe following sections provide addition al information for the SonicPoint-ACe. Support and training options, page 35Product safety and regulatory information, page 41 Chapter 4 Sections Include Configuring your appliance for wireless, page 19 • An introduction to zones and interfaces, page 20 • Configuring wireless access, page 20 Chapter 5 Sections Include Setting up your SonicPoint, page 27 • Installing antennas, page 28 • Connecting Ethernet cable, page 28 • Mounting using ceiling brackets, page 30 • Mounting using anchor screws, page 31 • Verifying operation, page 32 • Verifying WAN (Internet) connectivity, page 33 • Troubleshooting tips, page 33 SonicPoint_ACe_GSG.book Page 2 Monday, September 29, 2014 5:23 PM Draft Document | 3 Before you begin In this section:This section provides a basic checklist of mate rials and information needed before you begin. • "Check package contents" on page 4 • "What you need to begin" on page 5 • "SonicPoint top panel/status LEDs" on page 6 SonicPoint_ACe_GSG.book Page 3 Monday, September 29, 2014 5:23 PM Draft Document 4 | Check package contentsBefore continuing, ensure that your SonicPoi nt package contains the following materials: *The included power cord is approved for use only in specific co untries or regions. Before using a power cord, verify that it i s rated and approved for use in your location. Any items missing?If any of the items corresponding to yo ur product are missing from the package, contact Dell SonicWALL Technical Support at https://support.software.dell.com/manage-service-request A listing of the most current support documents are available online at: https://support.software.dell.com/ SonicPoint-ACe Appliance Checklist Getting Started Guide SonicPoint-ACe ApplianceMounting Kit (Ceiling Braces, Anchor and Screw Kit)Front LED/Logo Cover PlateAntennas (6)Power Adaptor* SonicPoint_ACe_GSG.book Page 4 Monday, September 29, 2014 5:23 PM Draft Document | 5 What you need to begin This page provides basic network hardware and software prerequisites as a baseline for SonicPoint-ACe deployments. Hardware/firmware requirementsThe Dell SonicWALL SonicPoint-ACe access points are centrally managed by any of the following Del…

Text truncated - open the document above for the full version.

Dell Inc. Richard Worley, NCE MS: PS4-30 EMC, Global Regulations and Standards One Dell Way Telephone 512.728.1081 Round Rock, Texas 78682 Telefax 512.283.9268 www.dell.com e-mail [email protected] Worldwide Regulatory Compliance Engineering & Environmental Affairs Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 April 9, 2014 FCC authorization letter for Dell Regulatory employees To whom it may concern, I, the undersigned, as the authorized signatory for the Dell Inc. grantee code E2K, hereby authorize the following EMC & Wireless Regulatory Engineers of Dell Inc., to act on my behalf as our agent in all manners relating to processes required according to FCC rules for equipment authorization: Thanh Nguyen Fiona Y Chen Don Bobo Jason KP Lee Adele Huang Steve L Williams Rick Linford James Carrillo Benton S Ng Alden Neilson Angelica Chang This authorization shall be sent along with application when filing with the FCC Certification Division and is valid until further written notice from the applicant. If you have any questions or need additional information, please feel free to contact me at 512-728-1081 or 512-431-1084. Sincerely, Richard Worley Dell Inc. FRN: 0008359580

Dell Inc. Rick Linford MS: PS4-30 Dell Software Regulatory One Dell Way Telephone 408.962.8798 Round Rock, Texas 78682 Telefax 408.745.9300 www.dell.com e-mail [email protected] Worldwide Regulatory Compliance Engineering & Environmental Affairs November 12, 2014 To: Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 Copy: BTL Inc. B1, No. 37, Lane 365, YangGuang St., NeiHu District 114, Taipei, Taiwan Cathy Wang FCC Agent Authorization To whom it may concern, I, the undersigned, hereby authorize Cathy Wang of BTL Inc., B1, No. 37, Lane 365, YangGuang St., NeiHu District 114, Taipei, Taiwan, (BTL) to act on our behalf as our agent in all manners relating to application for equipment authorization on FCC ID E2K-APL260AE, including signing of all documents relating to these matters. Any and all acts carried out by Cathy Wang of BTL on our behalf shall have the same effect as acts of our own. In authorizing this agent, we still recognize that we the FCC Grantee are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Agent; 2 e) use certification only to indicate the products are certified as being in conformity with specified standards; f) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; g) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the agent, TCB and FCC regulations; h) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the agent when requested; i) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification and document the actions taken. This authorization shall be sent along with application when filing with the FCC Certification Division and is valid until further written notice from the applicant. If you have any questions or need additional information, please feel free to contact this letter signatory using the contact information at the top of the first page or you may contact the Dell Grantee at 512-728-1081 or [email protected]. Sincerely, Rick Linford / Regulatory Engineer Dell Inc. FRN: 0008359580

Dell Inc. Richard Worley, NCE MS: PS4-30 EMC, Global Regulations and Standards One Dell Way Telephone 512.728.1081 Round Rock, Texas 78682 Telefax 512.283.9268 www.dell.com e-mail [email protected] Worldwide Regulatory Compliance Engineering & Environmental Affairs April 9, 2014 Federal Communication Commission Office of Engineering and Technology Equipment Authorization and Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: Anti-Drug Abuse Attestation Gentlemen: Please accept this letter as an attestation on behalf of Dell Inc. that to the best of our knowledge, information and belief, no party to this application, as defined in 47 CFR 1.2002(b), including our officers, directors, or persons holding 5% or more of outstanding stock or shares, voting or non-voting, have been denied federal benefits, including FCC benefits, under Section 5301 of the Anti-Drug Abuse Act of 1998.21 U.S.C. 862. This attestation shall be sent along with application when filing with the FCC Certification Division and is valid until further written notice from the applicant. If you have any questions or need additional information, please feel free to contact me at 512-728-1081 or 512-431-1084. Sincerely, Richard Worley Dell Inc. FRN: 0008359580

Dell Inc. Richard Worley, NCE MS: PS4-30 EMC, Global Regulations and Standards One Dell Way Telephone 512.728.1081 Round Rock, Texas 78682 Telefax 512.283.9268 www.dell.com e-mail [email protected] Worldwide Regulatory Compliance Engineering & Environmental Affairs Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date: October 24, 2014 Subject: Request for Confidentiality FCC ID: E2K-APL260AE Pursuant to the provisions of Sections §0.457 and 0.459 of the Commission’s Rules (47 CFR §0.457, §0.459), Dell Inc. hereby requests confidential treatment of the following documents and request that the Commission withhold these documents from public disclosure indefinitely under long term confidentiality (LTC).  Schematics, Block Diagrams  Operational Description The documents mentions above contain proprietary information and public disclosure of these documents might be harmful to our company and could give our competitors an unfair advantage. It is our understanding that all measurement test reports, FC ID label format and correspondence during the certification review process will be available for public review once the grant of equipment authorization is issued. If you have any questions or need additional information, please feel free to contact me at 512- 728-1081 or 512-431-1084. Sincerely, Richard Worley Dell Inc. FRN: 0008359580

Dell Inc. Rick Linford RCE MS: PS4-30 Dell Software Regulatory One Dell Way Telephone 408.962.8798 Round Rock, Texas 78682 Telefax 408.745.9300 www.dell.com e-mail [email protected] Worldwide Regulatory Compliance Engineering & Environmental Affairs October 26, 2014 To: Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 Copy: BTL Inc. B1, No. 37, Lane 365, YangGuang St., NeiHu District 114, Taipei, Taiwan Cathy Wang Declaration for no non-US channel operation We, Dell Inc. declare that the device does not support channel 12 ~ 13 in 2.4GHz band and any non-US channels in all the operational mode(s) for the following product. FCC ID: E2K-APL260AE If you should have any question(s) regarding this declaration, please don’t hesitate to contact us. Thank you! Sincerely, Rick Linford / Regulatory Compliacne Engineer

CERTIFICATE OF COMPLIANCE Authorized under Declaration of Conformity according to 47 CFR, Part 2 and Part 15 of the FCC Rules. The product listed in follows was (were) tested in the BTL EMC Laboratory to comply with the criteria limits Class B of conducted and radiated emissions of the Technical Standards FCC Part 15, Subpart B, established by the FCC, USA. Equipment Access Point Model Name APL26-0AE Brand Name DELL Applicant Dell Inc. Address One Dell Way Round Rock, Texas 78682 United States Standard(s) FCC Part 15, Subpart B: 2013 ANSI C63.4-2009 ICES-003 Issue 5: 2012 CISPR 22: 2008 CAN/CSA-CISPR 22-10 Report(s) BTL-FCCE-1-1410025 The test data, data evaluation, and equipment configuration contained in our test report(s) above was (were) obtained utilizing the test procedures, test instruments, test sites that has been accredited by the Authority of TAF according to the ISO-17025 quality assessment standard and technical standard(s). The test data contained in the referenced test report relate only to the EUT sample and item(s) tested. Andy Chiu Authorized Signatory BTL INC. B1, No. 37, Lane 365, Yang-Guang St., Nei-Hu District, Taipei City 114, Taiwan. TEL:+886-2-2657-3299 FAX:+886-2-2657-3331

Dell - Internal Use - Confidential Dell Inc. MS. PS4-30 One Dell Way Round Rock, Texas 78682 Re: FCC ID: E2K-APL260AE Applicant: Dell, Inc. Software Security Description FCC question/requested information Dell | Sonicwall Response General Description 1. Describe how any software/firmware update will be obtained, downloaded, and installed. - Updates can only be obtained from Dell, Inc. secure web site (mysonicwall.com) - The legitimate user needs to register SonicWALL appliance to mysonicwall.com first. After verification using appliance serial number and authentication code, user can be authorized to download SonicOS firmware image from mysonicwall.com web portal. - After SonicOS firmware image is downloaded, administrator can login to the appliance management UI to perform firmware upgrading over HTTPS. Only Dell SonicWALL signed firmware specific to the appliance type can be used to update. All other files will be rejected. 3. Are there any authentication protocols in place to ensure that the source of the software/firmware is legitimate? If so, describe in details; if not, explain how the software is secured from modification. - Dell SonicWALL uses Public Key Infrastructure (PKI) to authenticate source of firmware reliably. Dell SonicWALL secure signing server uses PKI private key to sign the firmware. And Dell SonicWALL appliance has PKI public key to authenticate the firmware image. Digital Signature Algorithm (DSA) and secure hashing algorithm SHA to validate only SonicWALL signed legitimate Page 2 of 2 Dell - Internal Use - Confidential firmware can be allowed for upgrading. Digest hash can ensure firmware is not modified. DSA can ensure firmware is authentic. 4. Are there any verification protocols in place to ensure that the software/firmware is legitimate? If so, describe in details. - Dell SonicWALL appliance built- in ROM Pack verifies firmware platform target to ensure firmware matches the appliance hardware product code. Only firmware dedicated for specific hardware platform is allowed for upgrading. 5. Describe, if any, encryption methods used. Digital Signature Algorithm (DSA) ensures firmware is authentic. 6. For a device that can be configured as a master and client (with active or passive scanning), explain how the device ensures compliance for each mode? In particular if the device acts as master in some band of operation and client in another; how is compliance ensured in each band of operation? No, SonicWALL appliance cannot be configured as master and client. Third-Party Access Control 1. How are unauthorized software/firmware changes prevented? Through the PKI, DSA and Secure hashing SHA authentication and verification. Only genuine Dell SonicWALL firmware can be accepted. 2. Is it possible for third parties to load device drivers that could modify the RF parameters, country of operation or other parameters which impact device compliance? If so, describe procedures to ensure that only approved drivers are loaded. No 3. Explain if any third parties have the capability to operate a US sold device on any other regulatory domain, Not possible. Dell SonicWALL device sold in US can only be operated in FCC regulatory domain and US allowed frequencies. The Page 2 of 2 Dell - Internal Use - Confidential frequencies, or in any manner that is in violation of the certification. product regulatory domain identification cannot be modified by all means 4. What prevents third parties from loading non-US versions of the software/firmware on the device? After Dell SonicWALL device is registered, device unique Serial number and regulatory domain are tied in to backend database to prevent third party from downloading non-US versions of firmware. And device authenticates and verifies firmware signature to only allow US-versions of firmware for upgrading. 5. For modular devices, describe how authentication is achieved when used with different hosts. NA SOFTWARE CONFIGURATION DESCRIPTION USER CONFIGURATION GUIDE 1. To whom is the UI accessible? (Professional installer, end user, other.) UI can only be accessed through user name and password authentication. The purchaser of the appliance defines roles and how they want to manage this access and what is restricted. Nothing in the UI can set appliance outside the parameter per grant of authorization a) What parameters are viewable to the professional installer/end- user?6 Depends on purchaser policy. b) What parameters are accessible or modifiable to the professional installer? Nothing in the UI can set appliance outside the parameter per grant of authorization. No special modes for installers or professionals or user. i) Are the parameters in some way limited, so that the installers will not enter Nothing in the UI can set appliance outside the parameter per grant of authorization. No special modes for installers or professionals or user. Page 2 of 2 Dell - Internal Use - Confidential parameters that exceed those authorized? ii) What controls exist that the user cannot operate the device outside its authorization in the U.S.? Nothing in the UI can set appliance outside the parameter per grant of authorization. No special modes for installers or professionals or user. c) What configuration options are available to the end-user? Nothing in the UI can set appliance outside the parameter per grant of authorization. No special modes for installers or professionals or user. i) Are the parameters in some way limited, so that the installers will not enter parameters that exceed those authorized? Nothing in the UI can set appliance outside the parameter per grant of authorization. No special modes for installers or professionals or user. ii) What controls exist that the user cannot operate the device outside its authorization in the U.S.? Nothing in the UI can set appliance outside the parameter per grant of authorization. No special modes for installers or professionals or user. d) Is the country code factory set? Can it be changed in the UI? App…

Text truncated - open the document above for the full version.

RV-0000000 Project No.: 1410025 Page 2 of 29 RV-0000000 Project No.: 1410025 Page 3 of 29 RV-0000000 Project No.: 1410025 Page 4 of 29 RV-0000000 Project No.: 1410025 Page 5 of 29 RV-0000000 Project No.: 1410025 Page 6 of 29 RV-0000000 Project No.: 1410025 Page 7 of 29 RV-0000000 Project No.: 1410025 Page 8 of 29 RV-0000000 Project No.: 1410025 Page 23 of 29 Adapter: AMS117-1202000F2 RV-0000000 Project No.: 1410025 Page 24 of 29 RV-0000000 Project No.: 1410025 Page 25 of 29 Adapter: SYS1544-2412-T3 RV-0000000 Project No.: 1410025 Page 26 of 29 RV-0000000 Project No.: 1410025 Page 27 of 29 RV-0000000 Project No.: 1410025 Page 28 of 29 RV-0000000 Project No.: 1410025 Page 29 of 29

DELL C0EAE4ABCDEF ECVP-YY3Z Serial Number: Authentication Code: Dell Products Europe B.V.Raheen Business Park, Limerick Ireland www.software.dell.com FCC ID: E2K-APL260AE This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:1) This device may not cause harmful interference, and2) this device must accept any interference received,including interference that may cause undesired operation. Made in Taiwan/ 101-500402-50 Rev. A ASSY: APL26-0AE POE Model/ : D-14200 341-000540-52 C LBL PN: SonicPoint ACe IC:1514B-APL260AE CAN ICES-3 (B)/NMB-3(B) 0.6A 48-55V UL 2043 Adapter 12V 2A 67.4mm 63.93mm 4.82mm 4.82mm

RV-0000000 Project No.: 1410025 Page 9 of 29 RV-0000000 Project No.: 1410025 Page 10 of 29 RV-0000000 Project No.: 1410025 Page 11 of 29 RV-0000000 Project No.: 1410025 Page 12 of 29 RV-0000000 Project No.: 1410025 Page 13 of 29 RV-0000000 Project No.: 1410025 Page 14 of 29 RV-0000000 Project No.: 1410025 Page 15 of 29 RV-0000000 Project No.: 1410025 Page 16 of 29 RV-0000000 Project No.: 1410025 Page 17 of 29 RV-0000000 Project No.: 1410025 Page 18 of 29 RV-0000000 Project No.: 1410025 Page 19 of 29 RV-0000000 Project No.: 1410025 Page 20 of 29 RV-0000000 Project No.: 1410025 Page 21 of 29 RV-0000000 Project No.: 1410025 Page 22 of 29

Page 1 of 7 P E M A A A 7 F Project N Equipme Model Applican Address Accordin B1, No TEL CC R FC No. : 141 ent : Ac : AP t : De : On Un ng: : FC C9 o. 37, Lane : (0769) RF EX CC ID 10025 ccess Po PL26-0AE ell Inc. ne Dell W nited Stat CC Guide 95.1 e 365, YangG 8318-3000 XPOS : E2K- int E Way Roun tes elines for BTL I n Guang St., 0 FAX : URE -APL2 nd Rock, r Human nc. NeiHu Dist (0769) 831 REP 60AE , Texas 7 Exposu trict 114, Ta 19-6000 ORT 78682 re IEEE aipei, Taiwaan Page 2 of 7 M P Table f An 1 2 3 7 PE CALC for Filed An nt. 2 3 CULATI ntenna Brand ION ME Part C147-5 C147-5 C147-5 ETHOD: NO. A 510906B 510906B 510906B : Antenna Type Dipole Dipole Dipole eConnector Reversed TNC Reversed TNC Reversed TNC r Gain(dBi) d 5.89 d 5.89 d 5.89 ) Note TX/RX TX/RX TX/RX Page 3 of 7 TEST BAND 1 EUT： Tempera Te s t Vo lt Te s t M od Antenna Gain (dBi) 5.89 5.89 5.89 EUT： Tempera Te s t Vo lt Te s t M od Antenna Gain (dBi) 5.89 5.89 5.89 7 RESUL ature: tage : de : a Antenna (nume 3.88 3.88 3.88 ature: tage : de : a Antenna (nume 3.881 3.881 3.881 LTS Access Po 25 °C AC 120V/6 TX A MOD a Gain eric) P e Pow 15 15 15 Access Po 25 °C AC 120V/6 TX N20 MO a Gain eric) Pe Pow 15 15 15 oint 60Hz DE/CH36, C eak Output wer (dBm) 19.79 19.93 19.67 oint 60Hz ODE_Total ak Output wer (dBm) 20.47 20.56 20.26 M R H40, CH48 Peak Outp Power (mW 95.2796 98.4011 92.6830 M R / CH36, CH Peak Outp Power (mW 111.4295 113.7627 106.1696 Model Name Relative Hu put W) Po w Densi (mW/ 6 0.0736 0.0760 0 0.0716 Model Name Relative Hu H40, CH48 put W) Po w Densi (mW / 5 0.0860 7 0.0878 6 0.0820 e : AP midity: 55 wer ity (S) /cm 2 ) Li m De (m 61230 02394 60616 e : AP midity: 55 wer ty (S) /cm 2 ) Lim D e (m 08954 89221 02578 PL26-0AE % mit of Power ensity (S) mW/cm 2 ) 1 1 1 PL26-0AE % it of Power ensity (S) mW/cm 2 ) 1 1 1 Te s t Result Complies Complies Complies Te s t Result Complies Complies Complies Page 4 of 7 EUT： Tempera Te s t Vo lt Te s t M od Antenna Gain (dBi) 5.89 5.89 EUT： Tempera Te s t Vo lt Te s t M od Antenna Gain (dBi) 5.89 5.89 5.89 7 ature: tage : de : a Antenna (nume 3.88 3.88 ature: tage : de : a Antenna (nume 3.881 3.881 3.881 Access Po 25 °C AC 120V/6 TX N40 MO a Gain eric) P e Pow 15 15 Wireless A Router 25 °C AC 120V/6 TX AC N20 a Gain eric) Pe Pow 15 15 15 oint 60Hz ODE_ Total eak Output wer (dBm) 17.69 19.15 AC1200 Dua 60Hz 0 MODE_To ak Output wer (dBm) 18.28 18.34 18.18 M R /CH38, CH Peak Outp Power (mW 58.7489 82.2243 al-band M R otal /CH36, Peak Outp Power (mW 67.2977 68.2339 65.7658 Model Name Relative Hu H46 put W) Po w Densi (mW/ 9 0.0453 3 0.0635 Model Name Relative Hu CH40, CH4 put W) Po w Densi (mW / 7 0.0519 9 0.0527 8 0.0508 e : AP midity: 55 wer ity (S) /cm 2 ) Li m De (m 38897 52583 e : AP midity: 55 48 wer ty (S) /cm 2 ) Lim D e (m 99366 71696 81014 PL26-0AE % mit of Power ensity (S) mW/cm 2 ) 1 1 PL26-0AE % it of Power ensity (S) mW/cm 2 ) 1 1 1 Te s t Result Complies Complies Te s t Result Complies Complies Complies Page 5 of 7 EUT： Tempera Te s t Vo lt Te s t M od Antenna Gain (dBi) 5.89 5.89 EUT： Tempera Te s t Vo lt Te s t M od Antenna Gain (dBi) 5.89 7 ature: tage : de : a Antenna (nume 3.88 3.88 ature: tage : de : a Antenna (nume 3.881 Wireless A Router 25 °C AC 120V/6 TX AC N40 a Gain eric) P e Pow 15 15 Wireless A Router 25 °C AC 120V/6 TX AC N80 a Gain eric) Pe Pow 15 AC1200 Dua 60Hz 0 MODE_ T eak Output wer (dBm) 15.52 17.57 AC1200 Dua 60Hz 0 MODE_To ak Output wer (dBm) 16.31 al-band M R Total /CH38, Peak Outp Power (mW 35.6451 57.1479 al-band M R otal /CH44 Peak Outp Power (mW 42.7563 Model Name Relative Hu , CH46 put W) Po w Densi (mW/ 1 0.0275 9 0.0441 Model Name Relative Hu put W) Po w Densi (mW / 3 0.0330 e : AP midity: 55 wer ity (S) /cm 2 ) Li m De (m 53914 15200 e : AP midity: 55 wer ty (S) /cm 2 ) Lim D e (m 03318 PL26-0AE % mit of Power ensity (S) mW/cm 2 ) 1 1 PL26-0AE % it of Power ensity (S) mW/cm 2 ) 1 Te s t Result Complies Complies Te s t Result Complies Page 6 of 7 BAND 4 EUT： Tempera Te s t Vo lt Te s t M od An enna Gain (dBi) 5.89 5.89 5.89 EUT： Tempera Te s t Vo lt Te s t M od An enna Gain (dBi) 5.89 5.89 5.89 EUT： Tempera Te s t Vo lt Te s t M od Antenna Gain (dBi) 5.89 5.89 7 ature: tage : de : nt Antenna (nume 3.88 3.88 3.88 ature: tage : de : nt Antenn a (nume 3.881 3.881 3.881 ature: tage : de : a Antenna (nume 3.88 3.88 Access Po 25 °C AC 120V/6 TX A MOD a Gain eric) P e Pow 15 15 15 Access Po 25 °C AC 120V/6 TX N-20M a Gain eric) Pe Pow 15 15 15 Access Po 25 °C AC 120V/6 TX N40 MO a Gain eric) P e Pow 15 15 oint 60Hz DE/CH149, C eak Output wer (dBm) 19.85 20.02 20.15 oint 60Hz MODE_Tot ak Output wer (dBm) 20.33 20.44 20.59 oint 60Hz ODE_ Total eak Output wer (dBm) 20.15 20.38 M R CH157, CH Peak Outp Power (mW 96.6051 100.4616 103.5142 M R tal / CH149 Peak Outp Power (mW 107.8947 110.6624 114.5513 M R /CH151, C Peak Outp Power (mW 103.5142 109.1440 Model Name Relative Hu 165 put W) Po w Densi (mW/ 1 0.0746 6 0.0776 2 0.0799 Model Name Relative Hu , CH157, C put W) Po w Densi (mW / 7 0.0833 4 0.0854 3 0.0885 Model Name Relative Hu CH159 put W) Po w Densi (mW/ 2 0.0799 0 0.0843 e : AP midity: 55 wer ity (S) /cm 2 ) Li m De (m 63635 61584 97429 e : AP midity: 55 CH165 wer ty (S) /cm 2 ) Lim D e (m 35859 49690 50145 e : AP midity: 55 wer ity (S) /cm 2 ) Li m De (m 97429 32384 PL26-0AE % mit of Power ensity (S) mW/cm 2 ) 1 1 1 PL26-0AE % it of Power ensity (S) mW/cm 2 ) 1 1 1 PL26-0AE % mit of Power ensity (S) mW/cm 2 ) 1 1 Te s t Result Complies Complies Complies Te s t Result Complies Complies Complies Te s t Result Complies Complies Page 7 of 7 EUT： Tempera Te s t Vo lt Te s t M od An enna Gain (dBi) 5.89 5.89 5.89 EUT： Tempera Te s t Vo lt Te s t M od An enna Gain (dBi) 5.89 5.89 EUT： Tempera Te s t Vo lt Te s t M od Antenna Gain (dBi) 5.89 Note: th e 7 ature: tage : de : nt Antenna (nume 3.88 3.88 3.88 ature: tage : de : nt Antenna (nume 3.881 3.881 ature: tage : de : a Antenna (nume 3.88 e calculated Access Po 25 °C AC 120V/6 TX AC-N20 a Gain eric) P…

Text truncated - open the document above for the full version.

Report No.: BTL-FCCP-2-1410025 Page 1 of 333 FCC Radio Test Report FCC ID: E2K-APL260AE This report concerns (check one): Original Grant Class II Change Project No. : 1410025 Equipment : Access Point Model Name : APL26-0AE Applicant : Dell Inc. Address : One Dell Way Round Rock, Texas 78682 United States Date of Receipt : Oct. 17, 2014 Date of Test : Oct. 17, 2014 ~ Nov. 19, 2014 Issued Date : Nov. 20, 2014 Tested by : BTL Inc. Testing Engineer : (Josh Lin) Technical Manager : (Jeff Yang) Authorized Signatory : (Andy Chiu) BTL INC. B1, No.37, Lane 365, Yang Guang St., Nei-Hu District, Taipei City 114, Taiwan. TEL: +886-2-2657-3299 FAX: +886-2-2657-3331 Report No.: BTL-FCCP-2-1410025 Page 2 of 333 Declaration BTLrepresents to the client that testing is done in accordan…

Text truncated - open the document above for the full version.