E2K-DWRFID2003RFID 13.56MHz Wireless Module

| | / Quick Start 快速入门 | 快速啟動 | Démarrage rapide | Quick Start Mulai Cepat | クイックスタート | 빠른 시작 | Início rápido Руководство по быстрому началу работы | Початок роботи Brzi početak | Brzo pokretanje | Inicio rápido التشغیل السریع התחלה מהירה Regulatory Model/Type 管制型号/类型 | 管制型號/類型 | Type/Modèle réglementaire | Vorschriftenmodell/-Typ | Tipe/Model Resmi 規制モデル / タイプ | 규정 모델/유형 | Tipo ou modelo de normalização Нормативная модель/тип | Модель/тип за нормативами | Regulatorni model/tip Regulatorni model/tip Modelo/tipo regulatorio النوع/الطراز الرقابي דגם/סוג תקינה Información para NOM, o Norma Oficial Mexicana La información que se proporciona a continuación se mostrará en los dispositivos que se describen en este documento, en conformidad con los requisitos de la Norma Oficial Mexicana (NOM): Importador: Dell México, S.A. de C.V Av. Javier Barros Sierra, no 540, Piso 10, Col. Lomas de Santa Fe Delegación Álvaro Obregón, Ciudad de México. C.P. 01219 R.F.C: DME9204099R6 País de origen: Hecho en China MCMC certification mark Windows In Windows Search, type System. In the search results, click System. Ubuntu On the desktop, click →About This Computer. Di impor oleh: PT Dell Indonesia Menara BCA Lantai 48 Unit 4804 Jalan M.H Thamrin No. 1 Jakarta Pusat, 10310 Indonesia Connection and use of this communications equipment is permitted by the Nigerian Communications Commission. 商品名稱： 型號： 額定電壓： 伏特 額定頻率： 赫茲 額定輸入電流： 安培 製造年份：參考外箱標示或條碼標籤 製造號碼：參考條外箱條碼標籤 生產國別：參考外箱標示 注意事項：參考使用手冊 產品功能：參考使用手冊 緊急處理方法：參考使用手冊 進口商/委製商：荷蘭商戴爾企業股份有限公司台灣分公司 進口商/委製商地址：台北市敦化南路二段 218 號 20 樓 進口商/委製商電話：00801-861-011 本產品符合臺灣RoHS標準CNS15663, 請見 http://www.dell.com/learn/tw/zh/twcorp1/envt-info-materials Read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at Dell.com/regulatory_compliance . 请阅读您计算机随附的安全信息。有关其他安全方面的最佳实践信息，请参阅 Dell.com/regulatory_compliance 上的“合规性”主页。 請閱讀電腦隨附的安全資訊。 關於其他最佳安全實作的資訊，請參閱 Regulatory Compliance Homepage (法規遵循首頁) 於 Dell.com/regulatory_compliance。 Lisez les consignes de sécurité livrées avec votre ordinateur. Pour des informations supplémentaires sur les pratiques d'excellence, reportez-vous à la page d'accueil de la conformité aux réglementations sur Dell.com/regulatory_compliance. Weitere Informationen bieten die im Lieferumfang des Computers enthaltenen Sicherheitshinweise. Um zusätzliche Informationen zur bestmöglichen Einhaltung der Sicherheitsrichtlinien zu erhalten, sehen Sie die dazugehörige Homepage unter Dell.com/regulatory_compliance. Lihat informasi keselamatan yang disertakan dengan komputer Anda. Untuk informasi praktik keselamatan tambahan, kunjungi Laman Pemenuhan Peraturan di Dell.com/regulatory_compliance. コンピュータに同梱の安全に関する注意事項をお読みください。安全にお使いいただくためのベストプラクティスの追加情報に関しては、Dell.com/regulatory_compliance の規制順守に関するホームペ ージを参照してください。 컴퓨터와 함께 제공된 안전 정보를 읽으십시오. 안전 우수사례와 관련한 추가 정보는, Dell.com/regulatory_compliance 의 규정 준수(Regulatory Compliance) 웹 사이트를 참조하십시오. Leia as informações de segurança fornecidas com o seu computador. Para obter mais informações sobre as boas práticas de segurança, consulte o site de conformidade normativa em Dell.com/regulatory_compliance . Ознакомьтесь с информацией о безопасности, поставляемой с вашим компьютером. Для получения дополнительных сведений о передовых практических методах по технике безопасности посетите домашнюю страницу соответствия нормативным требованиям на веб-узле Dell.com/regulatory_compliance. Ознайомтеся з паспортом безпеки, що входить до комплекту постачання комп'ютера. Додаткові відомості про техніку безпеки див. на головній сторінці розділу про відповідність нормативам за веб-адресою Dell.com/regulatory_compliance. Pročitajte bezbednosne informacije koje ste dobili uz računar. Za dodatne informacije o najboljoj bezbednosnoj praksi pogledajte početnu stranicu za usklađenost sa odredbama na adresi Dell.com/regulatory_compliance. Pročitajte bezbednosne informacije koje ste dobili uz računar. Za dodatne informacije o najboljim bezbednosnim praksama, pogledajte početnu stranicu za usklađenost sa propisima na Dell.com/regulatory_compliance. Lea la información de seguridad enviada con el equipo. Para obtener información adicional sobre las mejores prácticas de seguridad, consulte la Página principal de conformidad reglamentaria en Dell.com/regulatory_compliance. اقرأ معلومات الأمان الواردة مع الكمبیوتر. لإیجاد معلومات إضافیة حول أفضل ممارسات السلامة، انظر انظر الصفحة الرئیسیة لقسم Regulatory Compliances علي الموقع latory_complianceDell.com/regu. קרא את המידע בנושא בטיחות המצורף למחשב .לעיון במידע על נהלים מומלצים נוספים בנושא בטיחות ,ראה את דף הבית בנושא תאימות תקינה בכתובת Dell.com/regulatory_compliance. Do not remove the computer cover unless you need to install internal accessories for your computer. For instructions on removing and replacing parts, see the Owner’s or Service Manual at Dell.com/support. 除非您需要安装计算机内部附件，否则请勿卸除计算机主机盖。有关卸除和更换部件的说明，请参阅位于Dell.com/support 上的《用户手册》或《服务手册》。 除非您需要為您的電腦安裝內部配件，否則請勿拆卸電腦外蓋。有關拆卸和更換零件的說明，請參閱Dell.com/support 上的擁有者手冊或維修手冊。 Ne retirez pas le capot de l'ordinateur à moins que vous ne deviez installer des accessoires internes à votre ordinateur. Pour obtenir des instructions sur le remplacement des pièces, reportez-vous au Guide de l'utilisateur ou au Guide de maintenance à l'adresse Dell.com/support. Entfernen Sie die Computerabdeckung nur dann, wenn Sie das interne Zubehör für Ihren Computer einbauen müssen. Weitere Informationen zum Entfernen und Austauschen von Komponenten finden Sie im Benutzer- oder Service-Handbuch unter Dell.com/support. Jangan lepaskan penutup komputer kecuali Anda perlu memasang aksesori internal untuk komputer. Untuk petunjuk mengenai cara melepaskan dan memasang kembali komponen, lihat Panduan Layanan atau Panduan Pemilik di Dell.com/support. コンピュータの内部アクセサリを取り付ける必要がない限り、コンピュータのカバーを取り外さないでください。部品の取り外しおよび取り付け手順については、 Dell.com/support の 「オーナーズマニュアル」または「サービスマニュアル」を参照してください。 컴퓨터의 내장 액세서리를 장착해야 하는 경우를 제외하고 컴퓨터 덮개를 분리하지 마십시오.…

Text truncated - open the document above for the full version.

OEM Installation Guidance For Dell RFID 13.56MHz Wireless Module, FCC ID: E2K‐DWRFID2003, IC ID: 1514B-DWRFID2003 ‐ OEM integrators must ensure that its product is electrically identical to Dell’s reference designs. Any modifications to Dell’s reference designs may invalidate regulatory approvals in relation to the product, or may necessitate notifications to the relevant regulatory authorities. ‐ OEM integrators are responsible for regression testing to accommodate changes to designs, new antennas, and host and submit for C2PC filings. Colocation with other transmitter modules will be addressed through filings for those co‐located transmitters when necessary or that colocation of other transmitters will be according to applicable KDB guidelines including those for RF exposure ‐The final system integrator must ensure there is no instruction provided in the user manual or customer documentation indicating how to install or remove the transmitter ‐ Appropriate labels must be affixed to the product that complies with applicable regulations in all respects. The regulatory label on the final system must include the statement: “Contains FCC ID: E2K‐ DWRFID2003 and/or IC: 1514B‐ DWRFID2003”. ‐ A user’s manual or instruction manual must be included with the product that contains the text as required by applicable law shall be provided to OEM integrators. They may include: 1. USA—Federal Communications Commission (FCC) FCC COMPLIANCE STATEMENT: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. INFORMATION TO USER: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by tuning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures: ‐Reorient or relocate the receiving antenna ‐Increase the distance between the equipment and the receiver. ‐Connect the equipment to outlet on a circuit different from that to which the receiver is connected. ‐Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. The final host manual shall include the following regulatory statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by tuning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures: ‐Reorient or relocate the receiving antenna ‐Increase the distance between the equipment and the receiver. ‐Connect the equipment to outlet on a circuit different from that to which the receiver is connected. ‐Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 2. Canada ‐ Industry Canada (IC) This device complies with Industry Canada licence‐exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. French: Cet appareil est conforme avec Industrie Canada exempts de licence standard RSS (s). L‘utilisation de ce dispositif est autorisée seulement aux conditions suivantes : (1) il ne doit pas produire de brouillage et (2) l’ utilisateur du dispositif doit étre prêt à accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif.

Safety and Regulatory Information 安全和管制信息 安全及管制資訊 Informasi Keselamatan dan Peraturan 安全および認可機関に関する情報 안전및 규제정보 ข้อมูลเกี่ยวกับความปลอดภัยและกฎข้อบังคับ WARNING: A WARNING indicates a potential for property damage, personal injury, or death. Battery Safety WARNING: Using an incompatible battery or a third-party battery may increase the risk of fire or explosion. Replace the battery only with a battery purchased from Dell that is designed to work with your Dell computer. Do not use a battery from other computers with your computer. A damaged battery may pose a risk of personal injury. Damage may include impact or shock that dents or punctures the battery, exposure to a flame, or other deformation. Do not disassemble the battery. Handle a damaged or leaking battery pack with extreme care. If the battery is damaged, electrolyte may leak from the cells or fire may result which may cause personal injury. Safety and Regulatory Information You can find additional Safety Best Practices and information on REACH, Electromagnetic Compatibility (EMC), Ergonomics, Transportation, and Tuners on the Regulatory Compliance page, Dell.com/regulatory_ compliance. WARNING: Use of controls, adjustments, procedures, connections, or signal types other than those specified in your documentation may result in exposure to shock, electrical hazards, and/or mechanical hazards. WARNING: Dell products are not certified as medical electrical equipment, and are not intended for use in close proximity to patients or in oxygen rich environments. • Dell products are not designed for use in hazardous environments. • Dell products are not designed or intended for use in operating or calibrating medical devices. WARNING: Do not operate your equipment with any cover(s) (including computer covers, bezels, filler brackets, front-panel inserts, and so on) removed. • Do not use your equipment in a wet environment. Protect equipment from liquid intrusion. • Do not use damaged equipment, including exposed, frayed, or damaged power cords. • Do not push any objects into the air vents or openings of your equipment. Doing so can cause fire or electric shock by shorting out interior components. • Do not allow your portable computer or adapter to operate with the base resting directly on exposed skin for extended periods of time. The surface temperature of the base will rise during normal operation, particularly when AC power is present. Allowing sustained contact with exposed skin can cause discomfort or burn. • To remove a portable computer from all power sources, turn the computer off, disconnect the AC adapter from the electrical outlet, and remove any battery installed in the battery bay or module bay. When Working Inside Your Device WARNING: Hazardous moving parts. Keep away from the moving fan blades. • Do not attempt to service the equipment yourself, except as explained in your Dell documentation or in instructions otherwise provided to you by Dell. Always follow installation and service instructions closely. • Internal components may become very hot during normal operation. Before touching any internal components, allow time for them to cool. • Disconnect all cables from the portable computer including the phone cable before opening the memory/modem access door. • Check the voltage rating before you connect the equipment to an electrical outlet to ensure that the required voltage and frequency match the available power source. –If your device has a manual voltage-selection switch, your voltage-selection switch on the back panel must be manually set to operate at the correct operating voltage used in your location. • To prevent electric shock, plug the equipment power cables into properly grounded electrical outlets, and use only the approved power cables rated for the equipment. • For 3 pin plugs, do not use adapter plugs without the ground pin or remove the ground pin from the plug. Adapter Safety WARNING: Use only the Dell-provided AC adapter approved for use with this device. Use of another AC adapter may increase the risk of a fire or explosion. The AC adapter may become hot during normal operation of your computer. Ensure adequate ventilation and use care when handling the adapter during or immediately after operation. Do not use an auto adapter DC power cable connected via either an automobile cigarette lighter adapter or an empower-type connector in vehicles with high voltage (24 VDC), such as commercial transport vehicles. Location of Radio Regulatory Labels For some portable computers, the radio regulatory labels may be found either in the battery compartment, or under the bottom access panel. TCO Certification For information on any TCO cetification for this product, please visit: Dell.com/environment/TCO. India RoHS Statement This product complies with RoHS requirements as prescribed in E-Waste Management Rules by Government of India. For more information, see Dell.com/regulatory_compliance. Waste Electrical and Electronic Equipment (WEEE) Directive This label indicates that this product should not be disposed of with household waste. It should be deposited at an appropriate facility to enable recovery and recycling. For information on how to recycle this product responsibly in your country, please visit: Dell.com/recycle. 警告：“警告”表示可能导致财产损失、人身伤害或死亡 的潜在危险。 电池安全 警告：使用不兼容的电池或第三方电池可能会增加起火或 爆炸的风险。仅可使用从Dell购买的、设计用于Dell 计算机的电池来更换旧电池。请勿将其他计算机的电池用 于您的计算机。 损坏的电池可能会造成人员伤害。损坏可能包括使电池凹凸不 平或穿孔的碰撞或撞击、火烤或其他变形。请勿分解电池。处 理受损或发生漏液的电池组时应格外小心。如果电池被损坏， 电解液可能从电池中泄漏或发生可能导致人员伤害的火灾。 安全和管制信息 您可以在以下网址的规章符合性主页上找到附加的安全最佳实 践和有关 REACH、电磁兼容性（EMC）、人机工程学、运输 和调试等信息：Dell.com/regulatory_compliance。 警告：使用本文档中未指定的控件、调节操作、步骤、连 接或信号类型都可能造成触电、电危害和/或机械危害。 警告：Dell产品并未认证为医疗电气设备，因此不旨在用 于贴近患者或富氧环境中。 • Dell 产品不是设计用于危险环境中的。 • Dell 产品不是设计或旨在用于运行或校准医疗设备的。 警告：请勿在卸下任何盖板（包括主机盖、挡板、填充挡 片和前面板插件等）的情况下操作设备。 • 请勿在潮湿环境下使用设备。防止液体流入设备。 • 请勿使用受损设备，其中包括开裂、破损或损坏的电源线。 • 请勿向通风孔或设备开口处塞入任何物体。这样做可能会导 致内部组件短路，从而引起火灾或使人遭受电击。 • 请勿在便携式计算机或适配器运行时将其基座长时间放置于 暴露的皮肤上。基座的表面温度在正常操作时会升高，尤其 是在使用交流电源时。让基…

Text truncated - open the document above for the full version.

Dell Inc. Don Bobo MS: PS4-30 Distingished Member of Technical Staff One Dell Way EMC, Global Regulations and Standards Round Rock, Texas 78682 Telephone 512.728.5508 www.dell.com e-mail [email protected] Worldwide Regulatory Compliance Engineering & Environmental Affairs Internal Use - Confidential Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 April 16, 2020 FCC authorization letter for Dell Regulatory employees To whom it may concern, I, the undersigned, as the authorized signatory for the Dell Inc. grantee code E2K, hereby authorize the following EMC & Wireless Regulatory Engineers of Dell Inc., to act on my behalf in all manners relating to processes required according to FCC rules for equipment authorization: This authorization shall be sent along with application when filing with the FCC Certification Division and is valid until further written notice from the applicant. If you have any questions or need additional information, please feel free to contact me at 512-728-5508 or 512-619-7976. Sincerely, Don Bobo, Dell Inc., FRN: 0008359580 Adele Huang Angelica Chang Fiona Y Chen Kay Chen Jane YC Chen Jessie Goh Jack TS Huang Tommy Hwang Nai Ghee Koh Jason KP Lee Jason Limoges Leonel Lopez James V Nguyen Rex Wan Zenon Wang William Wei Steve L Williams Jim Wu Amber Peng Anna TA Lin

Dell Inc. One Dell Way, Round Rock Texas 78682 United States Date: October 30, 2020 I, the undersigned, hereby authorize Andrea Hsia / Supervisor of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (“BV CPS Taoyuan”), and hereafter referred to as BV CPS Taoyuan, to act on our behalf in all manners relating to applications for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Andrea Hsia / Supervisor of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch on our behalf shall have the same effect as acts of our own. Dell Inc. One Dell Way, Round Rock Texas 78682 United States The authorization is valid until further written notice from the applicant. Sincerely yours, --------------------------------------- William Wei Regulatory Compliance Engineer Dell Inc. Tel: (02) 23766556 Email: [email protected]

FCC ID: E2K-DWRFID2003 Modular Approval Request Letter Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch November 9, 2020 Dear Application Examiner, Dell Inc., RFID 13.56MHz Wireless Module, FCC ID: E2K-DWRFID2003 would like to have your authorization as a modular approval specific to the mobile RF exposure condition. The requirements of KDB996369 have been met and shown on the following statements. 1. “The modular transmitter must have its own RF shielding.” The radio portion of this module has been shielded, please see exhibition External Photo. 2. “The modular transmitter must have buffered modulation/data inputs.” The EUT has buffered data inputs, it is integrated in chip BCM58202. 3. “The modular transmitter must have its own power supply regulation.” The part number of this regulator is BCM58202. 4. “The modular transmitter must comply with the antenna requirements of section 15.203 and 15.204(C).” The EUT meets the FCC antenna requirements. The spurious emission, unique antenna connector and photo of antennas are shown in the test report. “The modular transmitter must be tested in a stand-alone configuration” The module is tested inside of a host device, Portable Computer (Brand: DELL, Model: P133G). Please see section Photographs of Test Configuration in the test report. 5. “The modular transmitter must be labeled with its own FCC ID number.” Please see exhibition Label Sample for the FCC ID of this module. And also in the exhibition Users Manual, there are instructions give to the OEM on how to label the end product. 6. “The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements.” The EUT is compliant with all applicable FCC rules. Detail instructions for maintaining compliance are given in the Users Manual. 7. “The modular transmitter must comply with any applicable RF exposure requirements.” The EUT is compliant with all applicable RF exposure requirements. RF Exposure is addressed in the RF exposure exhibition. Please contact me if you have any further questions. Thanks for your attention. Best Regards, Andrea Hsia / Supervisor Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Tel: +886-3-264-1628 Fax: +886-3-327-0892 Email: [email protected]

Reference No.: BEDW-WTW-P20080357 1 of 7 CONSTRUCTION PHOTOS OF EUT Brand: DELL / Model: DWRFID2003 Reference No.: BEDW-WTW-P20080357 2 of 7 (End-product: Brand: DELL / Model: P133G) Reference No.: BEDW-WTW-P20080357 3 of 7 Reference No.: BEDW-WTW-P20080357 4 of 7 Reference No.: BEDW-WTW-P20080357 5 of 7 Reference No.: BEDW-WTW-P20080357 6 of 7 Reference No.: BEDW-WTW-P20080357 7 of 7

DELL DWRFID2003 Contains IC: 1514B-DWRFID2003 Contains FCC: E2K-DWRFID2003 Inside bottom door

Reference No.: BEDW-WTW-P20080357 1 of 9 CONSTRUCTION PHOTOS OF EUT Brand: DELL / Model: DWRFID2003 Reference No.: BEDW-WTW-P20080357 2 of 9 (End-product: Brand: DELL / Model: P133G) Reference No.: BEDW-WTW-P20080357 3 of 9 Antenna Reference No.: BEDW-WTW-P20080357 4 of 9 Reference No.: BEDW-WTW-P20080357 5 of 9 Reference No.: BEDW-WTW-P20080357 6 of 9 Reference No.: BEDW-WTW-P20080357 7 of 9 Reference No.: BEDW-WTW-P20080357 8 of 9 Reference No.: BEDW-WTW-P20080357 9 of 9

Report No.: RFBEDW-WTW-P20080357 Page No. 1 / 43 Report Format Version: 6.1.1 FCC Test Report Report No.: RFBEDW-WTW-P20080357 FCC ID: E2K-DWRFID2003 Test Model: DWRFID2003 Received Date: Aug. 19, 2020 Test Date: Sep. 13, 2020 ~ Sep. 23, 2020 Issued Date: Oct. 16, 2020 Applicant: Dell Inc. Address: One Dell Way, Round Rock, Texas 78682, USA Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No.19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, Taiwan FCC Registration / Designation Number: 788550 / TW0003 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: RFBEDW-WTW-P20080357 Page No. 2 / 43 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ........................................................................................................................... 4 2 Summary of Test Results ........................................................................................................................... 5 2.1 Measurement Uncertainty ..................................................................................................................... 5 2.2 Modification Record .............................................................................................................................. 5 3 General Information ................................................................................................................................... 6 3.1 General Description of EUT .................................................................................................................. 6 3.2 Description of Test Modes ..................................................................................................................... 7 3.2.1 Test Mode Applicability and Tested Channel Detail .................................................................... 7 3.3 Description of Support Units ................................................................................................................. 9 3.3.1 Configuration of System under Test ........................................................................................... 9 3.4 General Description of Applied Standards and references................................................................... 9 4 Test Types and Results ............................................................................................................................ 10 4.1 Radiated Emission Measurement ....................................................................................................... 10 4.1.1 Limits of Radiated Emission Measurement .............................................................................. 10 4.1.2 Test Instruments ........................................................................................................................ 11 4.1.3 Test Procedures ........................................................................................................................ 12 4.1.4 Deviation from Test Standard ................................................................................................... 12 4.1.5 Test Set Up ............................................................................................................................... 13 4.1.6 EUT Operating Conditions ........................................................................................................ 13 4.1.7 Test Results .............................................................................................................................. 14 4.2 Conducted Emission Measurement .................................................................................................... 30 4.2.1 Limits of Conducted Emission Measurement ........................................................................... 30 4.2.2 Test Instruments ....................................................................................................................... 30 4.2.3 Test Procedures ........................................................................................................................ 31 4.2.4 Deviation from Test Standard ................................................................................................... 31 4.2.5 Test Setup ................................................................................................................................. 31 4.2.6 EUT Operating Conditions ..............................…

Text truncated - open the document above for the full version.

Reference No.: BEDW-WTW-P20080357 Page 1 / 2 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST Reference No.: BEDW-WTW-P20080357 Page 2 / 2 RADIATED EMISSION TEST (9kHz - 30MHz) (Below 1GHz) ---END---