E2K-DWRFID2305-01RFID 13.56MHz Wireless Module

Worldwide Regulatory Compliance Engineering and Environmental Affairs OEM Installation Guidance Dell RFID 13.56MHz Wireless Module Model Name: DWRFID2305-01 FCC ID: E2K-DWRFID2305-01, IC: 1514B-DWRFID2305A ‐ OEM integrators must ensure that its product is electrically identical to Dell’s reference designs. Any modifications to Dell’s reference designs may invalidate regulatory approvals in relation to the product, or may necessitate notifications to the relevant regulatory authorities. ‐ OEM integrators are responsible for regression testing to accommodate changes to designs, new antennas, and host and submit for C2PC filings. Colocation with other transmitter modules will be addressed through filings for those co‐located transmitters when necessary or that colocation of other transmitters will be according to applicable KDB guidelines including those for RF exposure ‐The final system integrator must ensure there is no instruction provided in the user manual or customer documentation indicating how to install or remove the transmitter ‐ Appropriate labels must be affixed to the product that complies with applicable regulations in all respects. The regulatory label on the final system must include the statement: “Contains FCC ID: E2K‐DWRFID2305-01 and/or IC: 1514B-DWRFID2305A”. ‐ A user’s manual or instruction manual must be included with the product that contains the text as required by applicable law shall be provided to OEM integrators. They may include: 1. USA—Federal Communications Commission (FCC) FCC COMPLIANCE STATEMENT: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. INFORMATION TO USER: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by tuning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures: ‐Reorient or relocate the receiving antenna ‐Increase the distance between the equipment and the receiver. ‐Connect the equipment to outlet on a circuit different from that to which the receiver is connected. ‐Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. The final host manual shall include the following regulatory statement: Worldwide Regulatory Compliance Engineering and Environmental Affairs This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by tuning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures: ‐Reorient or relocate the receiving antenna ‐Increase the distance between the equipment and the receiver. ‐Connect the equipment to outlet on a circuit different from that to which the receiver is connected. ‐Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Worldwide Regulatory Compliance Engineering and Environmental Affairs FOR PORTABLE DEVICE USAGE (<20m from body/SAR needed) Radiation Exposure Statement: The product comply with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available. This module is intended for OEM integrators only. Per FCC KDB 996369 D03 OEM Manual, the following conditions must be strictly followed when using this certified module: KDB 996369 D03 OEM Manual rule sections: 2.2 List of applicable FCC rules This module has been tested for compliance to FCC Part 15 2.3 Summarize the specific operational use conditions This module is exclusively for use in the host device P127F/P181G/P182G P127F/P181G/P182G incorporates this module (module model name DWRFID2305-01) and the antenna certified for use with this module. Incorporating this module into a host device other than P127F/P181G/P182G will require a separate reassessment through a class II permissive change or new certification. Full testing for the new specific host is required. 2.4 Limited module procedures This module is certified as l…

Text truncated - open the document above for the full version.

Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. FOR PORTABLE DEVICE USAGE (<20m from body/SAR needed) Radiation Exposure Statement: The product comply with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.

Global Product Compliance Engineering & Environmental Affairs RQF0400 Internal Use -Confidential U.S. Agent Designation for Service of Process -Certification Attestation Letter ATTN.: Reviewing Engineer Grantee Code: E2K Pursuant to§2.911(d)(7) of the FCC rules, Dell Inc. (“the applicant”) certifies that the equipment for which authorization is sought is designated to the following U.S. Designated agent for service of process: Company Name:Dell Inc. Physical U.S. Company Address:One Dell Way, Round Rock, Texas 78682;USA Agent name:Don Bobo Agent Email Address:[email protected] Agent Phone:+1 512 5938560 FRN:0008359580 The above contact person accepts the obligation for service of process. The applicant accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or upon the conclusion of any Commissionrelated proceedingsinvolving the equipment. Applicant Signed: Printed name: Don Bobo Title: Distinguished Member Technical Staff Company Name: Dell Inc. Date: Nemko North America, Inc. 303 River Road Ottawa K1V 1H2 Canada Mar 9 2023

Date: 2023-12-06 FCC ID: E2K-DWRFID2305 To the attention of Federal Communications Commission Authorization and Evaluation Division Attestation Statements Attestation Statements Part 2.911(d)(5)(i) Filing Dell Inc.certifies that the equipment for which authorization is sought is not equipment prohibited from receivingan equipment authorization pursuant to section 2.903 of the FCC rules. Attestation Statements Part 2.911(d)(5)(ii) Filing Dell Inc.certifies that, as of the date of the filing of the application, the applicant is not Sincerely yours, ----------------------------------------------- Greg Hsiao Dell Technologies Global Product Compliance Engineering & EA office +886 2 2376 9410 [email protected] FCC ID: E2K-DWRFID2305-01

Date: 2023-12-05 FCC ID: E2K-DWRFID2305-01 A U T H O R I Z A T I O N L E T T E R To Whom It May Concern: Dell Inc. hereby authorizes Tilly Pan/ Specialist of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (“BV CPS Taoyuan”), to act on its behalf in all matters relating to the Federal Communication Commission (“FCC”) application for equipment authorization in connection with the FCC ID listed above, including signing of all documents relating to these matters. Any and all acts carried out by Tilly Pan/ Specialist of BV CPS Taoyuan on Dell Inc.’s behalf, within the scope of the powers granted herein, shall have the same effect as acts of its own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Sincerely yours, ----------------------------------------------- Greg Hsiao Dell Technologies Global Product Compliance Engineering & EA office +886 2 2376 9410 [email protected]

Dell Inc. Don Bobo MS: PS4-30 Distingished Member of Technical Staff One Dell Way EMC, Global Regulations and Standards Round Rock, Texas 78682 Telephone 512.728.5508 www.dell.com e-mail [email protected] Worldwide Regulatory Compliance Engineering & Environmental Affairs Internal Use - Confidential Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 December 13, 2021 FCC authorization letter for Dell Regulatory employees To whom it may concern, I, the undersigned, as the authorized signatory for the Dell Inc. grantee code E2K, hereby authorize the following EMC & Wireless Regulatory Engineers of Dell Inc., to act on my behalf in all manners relating to processes required according to FCC rules for equipment authorization: This authorization shall be sent along with application when filing with the FCC Certification Division and is valid until further written notice from the applicant. If you have any questions or need additional information, please feel free to contact me at 512-593-8560 or 512-619-7976. Sincerely, Don Bobo, Dell Inc., FRN: 0008359580 Adele Huang Angelica Chang Fiona Y Chen Kay Chen Jane YC Chen Jessie Goh Jack TS Huang Tommy Hwang Nai Ghee Koh Jason KP Lee Jason Limoges Leonel Lopez James V Nguyen Rex Wan Zenon Wang William Wei Steve L Williams Jim Wu Amber Peng Leo Hong Dyllan Chang Ken Tai CY Chang Maurice Wu Greg Hsiao

Date: 2023-12-06 FCC ID: E2K-DWRFID2305-01 To the attention of Federal Communications Commission Authorization and Evaluation Division Permanent Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, ----------------------------------------------- Greg Hsiao Dell Technologies Global Product Compliance Engineering & EA office +886 2 2376 9410 [email protected]

Date: 2023-12-06 FCC ID: E2K-DWRFID2305-01 To the attention of Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the commission’s rules, we request short-term confidential treatment for the following information until 180 days after the Grant Date of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device: External photos Test Setup photos User’s manual Internal Photos Sincerely yours, ----------------------------------------------- Greg Hsiao Dell Technologies Global Product Compliance Engineering & EA office +886 2 2376 9410 [email protected]

FCC ID: E2K-DWRFID2305-01 Limited Modular Approval Request Letter Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch January 8, 2024 Dear Application Examiner, Dell Inc., RFID 13.56MHz Wireless Module, FCC ID: E2K-DWRFID2305-01 would like to have your authorization as a limited modular approval for the specific Dell’s host as below description: The requirements of KDB996369 have been met and shown on the following statements. 1. “The modular transmitter not have its own RF shielding.” The radio portion of this module hasn’t been shielded, please see exhibition External Photo. 2. “The modular transmitter must have buffered modulation/data inputs.” The EUT has buffered data inputs, it is integrated in chip BCM58202. 3. “The modular transmitter must have its own power supply regulation.” The part number of this regulator is BCM58202 4. “The modular transmitter must comply with the antenna requirements of section 15.203 and 15.204(C).” The EUT meets the FCC antenna requirements. The spurious emission, unique antenna connector and photo of antennas are shown in the test report. 5. “The modular transmitter must be labeled with its own FCC ID number.” Please see exhibition Label Sample for the FCC ID of this module. And also in the exhibition Users Manual, there are instructions give to the OEM on how to label the end product. “The modular transmitter must be tested in a stand-alone configuration” The EUT was tested inside a specific platform. Please see section Photographs of Test Configuration in the test report, the EUT is for limited modular approval for this specific platform (Model: P127F; Brand: DELL). 6. “The modular transmitter must be labeled with its own FCC ID number.” Please see exhibition Label Sample for the FCC ID of this module. And also in the exhibition Users Manual, there are instructions give to the OEM on how to label the end product. FCC ID: E2K-DWRFID2305-01 7. “The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements.” The EUT is compliant with all applicable FCC rules. Detail instructions for maintaining compliance are given in the Users Manual. 8. “The modular transmitter must comply with any applicable RF exposure requirements.” The EUT is compliant with all applicable RF exposure requirements. RF Exposure is addressed in the RF exposure exhibition. Please contact me if you have any further questions. Thanks for your attention. Best Regards, Tilly Pan/ Specialist Bureau Veritas Consumer Products Services (H.K.) Ltd., Hsinchu Branch

Reference No.: BDGE-WTW-P23110010-1 Page 1/7 CONSTRUCTION PHOTOS OF EUT Brand: DELL, Model: DWRFID2305-01 Reference No.: BDGE-WTW-P23110010-1 Page 2/7 End-product, Portable Computer (Brand: DELL, Model: P127F) Reference No.: BDGE-WTW-P23110010-1 Page 3/7 Reference No.: BDGE-WTW-P23110010-1 Page 4/7 Reference No.: BDGE-WTW-P23110010-1 Page 5/7 Adapter (Brand: DELL, Model: LA65NM190) Reference No.: BDGE-WTW-P23110010-1 Page 6/7 Reference No.: BDGE-WTW-P23110010-1 Page 7/7

This Device contain module DWRFID2305-01 Contain FCC ID: E2K-DWRFID2305-01 Contain IC: 1514B- DWRFID2305A Label are sticked on the core side of D cover DELL Model name: P127F

RFID module DWRFID2305-01 FCC ID: E2K-DWRFID2305-01 IC: 1514B-DWRFID2305A RFID label

Reference No.: BDGE-WTW-P23110010-2 Page 1/7 CONSTRUCTION PHOTOS OF EUT Brand: DELL, Model: DWRFID2305-01 Reference No.: BDGE-WTW-P23110010-2 Page 2/7 End-product, Portable Computer (Brand: DELL, Model: P127F) Reference No.: BDGE-WTW-P23110010-2 Page 3/7 Reference No.: BDGE-WTW-P23110010-2 Page 4/7 Reference No.: BDGE-WTW-P23110010-2 Page 5/7 Reference No.: BDGE-WTW-P23110010-2 Page 6/7 Battery (Brand: DELL, Model: GRWKG) Reference No.: BDGE-WTW-P23110010-2 Page 7/7

Report No.: MFBDGE-WTW-P23110010 Page No. 1 / 6 Report Format Version: 6.1.1 RF Exposure Report Report No.: MFBDGE-WTW-P23110010 FCC ID: E2K-DWRFID2305-01 Test Model: DWRFID2305-01 Received Date: Nov. 01, 2023 Test Date: Nov. 17 ~ Nov. 21, 2023 Issued Date: Dec. 14, 2023 Applicant: Dell Inc. Address: One Dell Way, Round Rock, Texas 78682, USA Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, Taiwan FCC Registration / Designation Number: 788550 / TW0003 This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Report No.: MFBDGE-WTW-P23110010 Page No. 2 / 6 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 RF Exposure .......................................................................................................................................... 5 3 SAR Test Exclusion Thresholds .......................................................................................................... 6 4 Conclusion ............................................................................................................................................ 6 Report No.: MFBDGE-WTW-P23110010 Page No. 3 / 6 Report Format Version: 6.1.1 Release Control Record Issue No. Description Date Issued MFBDGE-WTW-P23110010 Original release Dec. 14, 2023 Report No.: MFBDGE-WTW-P23110010 Page No. 4 / 6 Report Format Version: 6.1.1 1 Certificate of Conformity Product: RFID 13.56MHz Wireless Module Brand: DELL Test Model: DWRFID2305-01 Sample Status: Engineering Sample Applicant: Dell Inc. Test Date: Nov. 17 ~ Nov. 21, 2023 FCC Rule Part: FCC Part 2 (Section 2.1091) Standards: KDB 447498 D01 General RF Exposure Guidance v06 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Prepared by : , Date: Dec. 14, 2023 Gina Liu / Specialist Approved by : , Date: Dec. 14, 2023 Jeremy Lin / Project Engineer Report No.: MFBDGE-WTW-P23110010 Page No. 5 / 6 Report Format Version: 6.1.1 2 RF Exposure Following FCC KDB 447498 D01 “General SAR test exclusion guidance” The corresponding SAR Exclusion Threshold condition, listed below: 1) The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where ➢ f(GHz) is the RF channel transmit frequency in GHz. ➢ Power and distance are rounded to the nearest mW and mm before calculation. ➢ The result is rounded to one decimal place for comparison. The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. 2) At 100 MHz to 6 GHz and for test separation distances > 50 mm, the SAR test exclusion threshold is determined according to the following: a) [Threshold at 50 mm in step 1) + (test separation distance - 50mm)·( f(MHz)/150)] mW, at 100MHz to 1500 MHz b) [Threshold at 50 mm in step 1) + (test separation distance - 50 mm)·10] mW at > 1500 MHz and ≤ 6 GHz 3) At frequencies below 100 MHz, the following may be considered for SAR test exclusion. a) The threshold at the corresponding test separation distance at 100 MHz in step 2) is multiplied by [1 + log(100/f(MHz))] for test separation distances > 50 mm and < 200 mm. b) The threshold determined by the equation in a) for 50 mm and 100 MHz is multiplied by ½ for test separation distances ≤ 50 mm. c) SAR measurement procedures are not…

Text truncated - open the document above for the full version.

Report No.: RFBDGE-WTW-P23110010 Page No. 1 / 31 Report Format Version: 6.1.1 FCC Test Report Report No.: RFBDGE-WTW-P23110010 FCC ID: E2K-DWRFID2305-01 Test Model: DWRFID2305-01 Received Date: Nov. 01, 2023 Test Date: Nov. 17 ~ Nov. 21, 2023 Issued Date: Dec. 14, 2023 Applicant: Dell Inc. Address: One Dell Way, Round Rock, Texas 78682, USA Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, Taiwan FCC Registration / Designation Number: 788550 / TW0003 This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Report No.: RFBDGE-WTW-P23110010 Page No. 2 / 31 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 Summary of Test Results ..................................................................................................................... 5 2.1 Measurement Uncertainty ................................................................................................................... 5 2.2 Modification Record ............................................................................................................................ 5 3 General Information .............................................................................................................................. 6 3.1 General Description of EUT ................................................................................................................ 6 3.2 Description of Test Modes ................................................................................................................... 6 3.2.1 Test Mode Applicability and Tested Channel Detail ............................................................................. 7 3.3 Description of Support Units ............................................................................................................... 8 3.3.1 Configuration of System under Test .................................................................................................... 8 3.4 General Description of Applied Standards .......................................................................................... 9 4 Test Types and Results ...................................................................................................................... 10 4.1 Radiated Emission Measurement ..................................................................................................... 10 4.1.1 Limits of Radiated Emission Measurement ....................................................................................... 10 4.1.2 Test Instruments ................................................................................................................................. 11 4.1.3 Test Procedures ................................................................................................................................. 12 4.1.4 Deviation from Test Standard ............................................................................................................ 12 4.1.5 Test Set Up ........................................................................................................................................ 13 4.1.6 EUT Operating Conditions ................................................................................................................. 13 4.1.7 Test Results ....................................................................................................................................... 14 4.2 Conducted Emission Measurement .................................................................................................. 22 4.2.1 Limits of Conducted Emission Measurement .................................................................................... 22 4.2.2 Test Instruments ................................................................................................................................ 22 4.2.3 Test Procedures .............................................................…

Text truncated - open the document above for the full version.

Reference No.: BDGE-WTW-P23110010_TSup Page No. …

Text truncated - open the document above for the full version.