E2K-P10E001Notebook Computer with 13.56M RFID reader

Dell Precision M4600/M6600 Mobile Workstation Setup And Features Information About Warnings WARNING: A WARNING indicates a potential for property damage, personal injury, or death. M4600 — Front And Back View Figure 1. Front View 1. display latches (2) 2. microphone 3. camera 4. camera LED 5. display 6. speakers (2) 7. power button 8. DisplayPort connector Regulatory Model: P13F, P10E Regulatory Type: P13F001, P10E001 January 2011 9. USB 3.0 connectors (2) 10. hard drive 11. fingerprint reader (optional) 12. wireless switch 13. display latch release button 14. touchpad buttons (3) 15. touchpad 16. track stick buttons (3) 17. track stick 18. keyboard 19. device status lights 20. volume control buttons Figure 2. Back View 1. cooling vents 2. VGA connector 3. network connector 4. eSATA/USB 2.0 connector 5. HDMI connector 6. power connector 7. security cable slot 8. USB 2.0 connectors (2) 9. IEEE 1394 port (4-pin) 10. microphone connector 11. headphone connector 12. battery status light 13. power light 14. 8-in-1 card reader slot 15. optical drive eject button 16. optical drive 17. smart card reader slot 18. ExpressCard slot 2 Precision M6600 — Front And Back View Figure 3. Front View 1. display latches (2) 2. microphone 3. camera 4. camera LED 5. display 6. speakers (2) 7. power button 8. DisplayPort connector 9. USB 3.0 connectors (2) 10. hard drive 11. fingerprint reader (optional) 12. wireless switch 13. display latch release button 14. touchpad buttons (3) 15. touchpad 16. track stick buttons (3) 17. track stick 18. keyboard 19. device status lights 20. volume control buttons 3 Figure 4. Back View 1. cooling vents 2. network connector 3. VGA connector 4. HDMI connector 5. eSATA/USB 2.0 connector 6. power connector 7. security cable slot 8. USB 2.0 connectors (2) 9. IEEE 1394 port (6-pin, powered) 10. microphone connector 11. headphone connector 12. battery status light 13. power light 14. 8-in-1 card reader slot 15. optical drive eject button 16. optical drive 17. smart card reader slot 18. ExpressCard slot Quick Setup WARNING: Before you begin any of the procedures in this section, read the safety information that shipped with your computer. For additional best practices information, see www.dell.com/regulatory_compliance. WARNING: The AC adapter works with electrical outlets worldwide. However, power connectors and power strips vary among countries. Using an incompatible cable or improperly connecting the cable to the power strip or electrical outlet may cause fire or equipment damage. CAUTION: When you disconnect the AC adapter cable from the computer, grasp the connector, not the cable itself, and pull firmly but gently to avoid damaging the cable. When you wrap the AC adapter cable, ensure that you follow the angle of the connector on the AC adapter to avoid damaging the cable. 4 NOTE: Some devices may not be included if you did not order them. 1. Connect the AC adapter to the AC adapter connector on the computer and to the electrical outlet. Figure 5. AC Adapter 2. Connect the network cable (optional). Figure 6. Network Connector 3. Connect USB devices, such as a mouse or keyboard (optional). Figure 7. USB Connector 4. Connect IEEE 1394 devices, such as a 1394 hard drive (optional). 5 Figure 8. 1394 Connector on M4600 Figure 9. 1394 Connector on M6600 5. Open the computer display and press the power button to turn on the computer. Figure 10. Power Button NOTE: It is recommended that you turn on and shut down your computer at least once before you install any cards or connect the computer to a docking device or other external device, such as a printer. Specifications NOTE: Offerings may vary by region. The following specifications are only those required by law to ship with your computer. For more information regarding the configuration of your computer, click Start → Help and Support and select the option to view information about your computer. System Information ChipsetMobile Intel QM67 Express Chipset Processor • Intel Core i5 and i7 Dual Core • Intel Core i7 Quad Extreme • Intel Core i7 Quad Core 6 Video Video typediscrete Data busintegrated video Video controller and memory M4600 • AMD FirePro M5950 Mobility Pro Graphics with 1GB GDDR5 • NVIDIA Quadro 1000M with 2GB GDDR3 • NVIDIA Quadro 2000M with 2GB GDDR3 M6600 • AMD FirePro M8900 Mobility Pro Graphics with 2GB GDDR5 • NVIDIA Quadro 3000M with 2GB GDDR5 • NVIDIA Quadro 4000M with 2GB GDDR5 Memory Memory connectorfour DIMM slots NOTE: Computers shipped with Intel Core i5 or Intel Core i7 support only two memory connectors. Memory capacity1 GB, 2 GB, 4 GB, and 8 GB Memory typeDDR3 1333MHz (1600 MHz and faster UI) Minimum memory2 GB Maximum memory32 GB Battery Typelithium ion Dimensions: NOTE: The Dell Precision M6600 Mobile Workstation only supports a 9–cell battery. 6-cell / 9–cell / 9–cell long cycle life (LCL) Depth80 mm (3.14 inches) Height190 mm (7.48 inches) Width20 mm (0.78 inches) 7 Battery Weight 6–cell365 g (0.80 lb) 9–cell / 9–cell LCL 500 g (1.10 lb) Voltage11.10 V Temperature range: Operating0 °C to 35 °C (32 °F to 95 °F) Non-operating-40 °C to 65 °C (-40 °F to 149 °F) Coin-cell battery3 V CR2032 lithium ion cell AC AdapterM4600M6600 Input voltage100–240 VAC100–240 VAC Input current (maximum)2.34 A3.50 A Input frequency50 Hz – 60 Hz50 Hz – 60 Hz Output power180 W240 W Output current9.23 A12.30 A Rated output voltage19.50 VDC19.50 VDC Dimensions:180 W240 W Height30 mm (1.18 inches)25.40 mm (1 inch) Width155 mm (6.10 inches)200 mm (7.87 inches) Depth76 mm (2.99 inches)100 mm (3.93 inches) Temperature range: Operating0 °C to 40 °C (32 °F to 104 °F) Non Operating-40 °C to 65 °C (-40 °F to 149 °F) Contactless Smart Card Supported Smart Cards and Technologies ISO14443A — 160 kbps, 212 kbps, 424 kbps, and 848 kbps ISO14443B — 160 kbps, 212 kbps, 424 kbps, and 848 kbps 8 Contactless Smart Card ISO15693 HID iClass FIPS201 NXP Desfire PhysicalM4600M6600 Height36.5 mm (1.44 inches)37.20 mm (1.46 inches) Width376 mm (14.80 …

Text truncated - open the document above for the full version.

FCC Radiation Exposure Statement WARNING: The radiated output power of the Dell Wireless WLAN Card devices is far below the FCC radio frequency exposure limits. Nevertheless, the Dell Wireless WLAN Card devices should be used in such a manner that the potential for human contact during normal operation is minimized. To avoid the possibility of exceeding the FCC radio frequency exposure limits, you should keep a distance of at least 20 cm between you (or any other person in the vicinity) and the antenna that is built into the printer. To determine the location of the antenna within your printer, check the information posted on the general Dell support site at http://support.dell.com . This device has also been evaluated for and shown compliant with the FCC RF exposure limits under portable exposure conditions (antennas are within 20 cm of a person's body) when installed in certain specific OEM configurations. Details of the authorized configurations can be found at http://www.fcc.gov/oet/fccid/help.html by entering the FCC ID number on the device. Interference Statement This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer's instruction manual, may cause interference with radio and television reception. This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference. 2) This device must accept any interference received, including interference that may cause undesired operation. Notice: The FCC regulations provide that changes or modifications not expressly approved by Dell Inc. could void your authority to operate this equipment. These limits are designed to provide reasonable protection against harmful interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference with radio or television reception, which can be determined by turning the equipment off and on, you are encouraged to try to correct the interference by one or more of the following measures: • Reorient the receiving antenna. • Relocate the system with respect to the receiver. • Move the system away from the receiver. • Plug the system into a different outlet so that the system and the receiver are on different branch circuits. If necessary, consult a representative of Dell Inc. or an experienced radio/television technician for additional suggestions. NOTE: This Dell Wireless WLAN Card must be installed and used in strict accordance with the manufacturer's instructions as described in the user documentation that comes with the product. Any other installation or use will violate FCC Part 15 regulations. Modifications not expressly approved by Dell could void your authority to operate the equipment. This device must not be co-located or operating in conjunction with any other antenna or transmitter.

Dell Inc. Steve L. Williams MS: PS4-30 EMC and Wireless Engineer One Dell Way Telephone 512.728.7473 Round Rock, Texas 78682 Telefax 512.283.9268 www.dell.com e-mail [email protected] Worldwide Regulatory Compliance Engineering & Environmental Affairs Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 November 4, 2010 Long-term confidentiality request regarding application for Certification of FCC ID: E2K-P10E001 To whom it may concern, Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: • Schematics • Block Diagram • Theory of Operation The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Steve L. Williams Dell Inc. FRN: 0008359580

Dell Inc. Steve L. Williams MS: PS4-30 EMC and Wireless Engineer One Dell Way Telephone 512.728.7473 Round Rock, Texas 78682 Telefax 512.283.9268 www.dell.com e-mail [email protected] Worldwide Regulatory Compliance Engineering & Environmental Affairs Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 November 4, 2010 Agency Authorization Letter for FCC ID: E2K-P10E001 To whom it may concern, We, the undersigned, hereby authorize Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf, as our agent, in the following matters related to the FCC approval of our products: report submittal, related correspondence, the signing of all documents relating to these matters, and any other lawful activity necessary to obtain such certification. Any act carried out by BV CPS Taoyuan within the scope of this authorization shall have the same effects as our own. This authorization shall expire six months from the original date. If you have any questions regarding the authorization, please don’t hesitate to contact us. Sincerely, Steve L. Williams Dell Inc. FRN: 0008359580

Dell Inc. Richard Worley, NCE MS: PS4-30 EMC, Global Regulations and Standards One Dell Way Telephone 512.728.1081 Round Rock, Texas 78682 Telefax 512.283.9268 www.dell.com e-mail [email protected] Worldwide Regulatory Compliance Engineering & Environmental Affairs November 4, 2010 To whom it may concern, I, the undersigned, as the authorized signatory for the Dell Inc grantee code E2K, hereby authorize Steve L. Wiiliams, EMC & Wireless Regulatory Engineering of Dell Inc., to act on my behalf in all manners relating to application (FCC ID: E2K-P10E001) for equipment authorization, including signing of all documents relating to this application. Any and all acts carried out by Steve L. Williams of Dell Inc. on our behalf shall have the same effects as acts of our own. This authorization shall be sent along with application when filing with the FCC Certification Division and is valid until further written notice from the applicant. If you have any questions or need additional information, please feel free to contact me at 512-728-1081 or 512-431-1084. Sincerley, Richard Worley Dell Inc. FRN: 0008359580

Dell Inc. Steve L. Williams MS: PS4-30 EMC and Wireless Engineer One Dell Way Telephone 512.728.7473 Round Rock, Texas 78682 Telefax 512.283.9268 www.dell.com e-mail [email protected] Worldwide Regulatory Compliance Engineering & Environmental Affairs Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 November 4, 2010 Short-term confidentiality (STC) request regarding application for Certification of FCC ID: E2K-P10E001 To whom it may concern, Pursuant to DA 04-1705 of the Commission’s public notice, we request short- term confidential treatment for the following information until 02 February 2011 after the Grant Date of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device: • External Photos • Test Setup Photos • User’s Manual • Internal Photos Sincerely, Steve L. Williams Dell Inc. FRN: 0008359580

Dell Inc. Steve L. Williams MS: PS4-30 EMC and Wireless Engineer One Dell Way Telephone 512.728.7473 Round Rock, Texas 78682 Telefax 512.283.9268 www.dell.com e-mail [email protected] Worldwide Regulatory Compliance Engineering & Environmental Affairs Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 January 27, 2011 Extension to Short-term confidentiality (STC) request regarding application for Certification of FCC ID: E2K-P10E001 To whom it may concern, Pursuant to DA 04-1705 of the Commission’s public notice, we request a 90 day extension to the short-term confidential treatment for the following information until 27 April 2011 after the Grant Date of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device: • External Photos • Test Setup Photos • User’s Manual • Internal Photos Sincerely, Steve L. Williams Dell Inc. FRN: 0008359580

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2 Page 3

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labelArtwork40x30mm CTSC-labelArtwork40x30mm W ir-LAN labelArtwork40x30mm WW AN labelArtwork40x30mm UWB label CTSC Label34x11mm Artwork40x30mm PART x 5 COMMUNICATIONS LABELS PROCESS PRINTED TEXT ON MYLAR COLOR BLACK MEASURE 40mm x 30mm PART CTSC Label PROCESS PRINTED TEXT ON MYLAR COLOR BLACK MEASURE 34mm x 11mm FCC label location

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2 Page 3 Page 4

Report No.: RF991019C13 R1 1 Report Format Version 4.0.0 Cancels and replaces the report No.: RF991019C13 dated Oct. 26, 2010 FCC TEST REPORT REPORT NO.: RF991019C13 R1 REGULATORY MODEL NAME: P10E REGULATORY TYPE NAME: P10E001 FCC ID: E2K-P10E001 RECEIVED: Oct. 19, 2010 TESTED: Oct. 20, 2010 ISSUED: Dec. 30, 2010 APPLICANT: Dell Inc. ADDRESS: One Dell Way, Round Rock, TX 78682, United States ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Tsuen, Lin Kou Hsiang, Taipei Hsien 244, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 32 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product, certification, approval or endorsement by TAF or any government agency. The test results in the report only apply to the tested sample. The test results in this report are traceable to the national or international standards. Report No.: RF991019C13 R1 2 Report Format Version 4.0.0 Cancels and replaces the report No.: RF991019C13 dated Oct. 26, 2010 Table of Contents RELEASE CONTROL RECORD.............................................................................................. 4 1. CERTIFICATION........................................................................................................... 5 2. SUMMARY OF TEST RESULTS .................................................................................. 6 2.1 .MEASUREMENT UNCERTAINTY ................................................................................ 6 3. GENERAL INFORMATION ........................................................................................... 7 3.1 GENERAL DESCRIPTION OF EUT ............................................................................. 7 3.2 DESCRIPTION OF TEST MODES ............................................................................... 8 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST .......................................................... 8 3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ............................... 9 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................................ 11 3.4 DESCRIPTION OF SUPPORT UNITS ....................................................................... 11 4. TEST TYPES AND RESULTS .................................................................................... 12 4.1 RADIATED EMISSION MEASUREMENT .................................................................. 12 4.1.1 LIMITS OF RADIATED EMISSION MEASUREMENT................................................ 12 4.1.2 TEST INSTRUMENTS................................................................................................ 13 4.1.3 TEST PROCEDURES ................................................................................................ 14 4.1.4 DEVIATION FROM TEST STANDARD....................................................................... 14 4.1.5 TEST SETUP.............................................................................................................. 15 4.1.6 EUT OPERATING CONDITIONS ............................................................................... 15 4.1.7 TEST RESULTS ......................................................................................................... 16 4.2 CONDUCTED EMISSION MEASUREMENT ............................................................. 20 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT........................................... 20 4.2.2 TEST INSTRUMENTS................................................................................................ 20 4.2.3 TEST PROCEDURES ................................................................................................ 21 4.2.4 DEVIATION FROM TEST STANDARD....................................................................... 21 4.2.5 TEST SETUP.............................................................................................................. 22 4.2.6 EUT OPERATING CONDITIONS ............................................................................... 22 4.2.7 TEST RESULTS ......................................................................................................... 23 4.3 FREQUENCY STABILITY........................................................................................... 25 4.3.1 LIMITS OF FREQUENCY STABILITY MEASUREMENT ........................................... 25 4.3.2 TEST INSTRUMENTS................................................................................................ 25 4.3.3 TEST PROCEDURE................................................................................................... 25 4.3.4 DEVIATION FROM TEST STANDARD....................................................................... 26 4.3.5 TEST SETUP.............................................................................................................. 26 Report No.: RF991019C13 R1 3 Report Format Version 4.0.0 Cancels and replaces the report No.: RF991019C13 dated Oct. 26, 2010 4.3.6 EUT OPERATING CONDITION.................................................................................. 26 4.3.7 TEST RESULTS ......................................................................................................... 27 4.4 20dB BANDWIDTH..................................................................................................... 28 4.4.1 LIMITS OF 20dB BANDWIDTH MEASUREMENT ..................................................... 28 4.4.2 TEST INSTRUMENTS................................................................................................ 28 4.4.3 TEST PROCEDURE............................................................................................…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST 2 RADIATED EMISSION TEST