E2K-T02E001Tablet PC

Connect the power cable and press the power button for 2 seconds Connect the power cable and press the power button for 2 seconds Connect the power cable and press the power button for 2 seconds Connect the power cable and press the power button for 2 seconds Connect the power cable and press the power button for 2 seconds 1 Translated Text Here Translated Text Here Translated Text Here Translated Text Here Quick Start Guide Venue 8 7000 Series Inserting SIM card (on LTE/HSPA+ models only) Insert SIM card (on LTE/HSPA+ models only) Insert SIM card (on LTE/HSPA+ models only) Insert SIM card (on LTE/HSPA+ models only) Insert SIM card (on LTE/HSPA+ models only) Finish Android setup Finish Android setup | Finish Android setup Finish Android setup | Finish Android setup Register your tablet Register your tablet | Register your tablet Register your tablet | Register your tablet 2 3 dell.com/support/retail Sign in to your account or create a new account. Sign in to your account or create a new account. Sign in to your account or create a new account. Sign in to your account or create a new account. Sign in to your account or create a new account. Connect to your network. Connect to your network. Connect to your network. Connect to your network. Connect to your network. Inserting microSD card (optional) Inserting microSD card (optional) Inserting microSD card (optional) Inserting microSD card (optional) Inserting microSD card (optional) Features Features | Features | Features | Features 1. Ambient-light sensor 2. Front camera 3. Speaker 4. Audio port 5. Micro-USB port 6. Microphone 7. Volume button 8. Power button 9. 3D camera (2) 10. Rear camera 11. MicroSD-card slot 12. SIM-card slot (LTE/HSPA+ models only) 13. Charging pads 8 Product support and manuals Product support and manuals Product support and manuals Product support and manuals Product support and manuals dell.com/support dell.com/support/manuals Contact Dell Contact Dell | Contact Dell Contact Dell | Contact Dell dell.com/contactdell Regulatory and safety Regulatory and safety | Regulatory and safety Regulatory and safety | Regulatory and safety dell.com/regulatory_compliance Regulatory model and type Regulatory model and type Regulatory model and type Regulatory model and type Regulatory model and type Tablet model Tablet model | Tablet model Tablet model | Tablet model Venue 8 7840 7 6 2 3 13 12 10 Printed in China. 2014-09 9 1 45 1. Ambient-light sensor 2. Front camera 3. Speaker 4. Audio port 5. Micro-USB port 6. Microphone 7. Volume button 8. Power button 9. 3D camera (2) 10. Rear camera 11. MicroSD-card slot 12. SIM-card slot (LTE/HSPA+ models only) 13. Charging pads 1. Ambient-light sensor 2. Front camera 3. Speaker 4. Audio port 5. Micro-USB port 6. Microphone 7. Volume button 8. Power button 9. 3D camera (2) 10. Rear camera 11. MicroSD-card slot 12. SIM-card slot (LTE/HSPA+ models only) 13. Charging pads 1. Ambient-light sensor 2. Front camera 3. Speaker 4. Audio port 5. Micro-USB port 6. Microphone 7. Volume button 8. Power button 9. 3D camera (2) 10. Rear camera 11. MicroSD-card slot 12. SIM-card slot (LTE/HSPA+ models only) 13. Charging pads 1. Ambient-light sensor 2. Front camera 3. Speaker 4. Audio port 5. Micro-USB port 6. Microphone 7. Volume button 8. Power button 9. 3D camera (2) 10. Rear camera 11. MicroSD-card slot 12. SIM-card slot (LTE/HSPA+ models only) 13. Charging pads © 2014 Dell Inc. © 2014 Google Inc. 11

FCC Radiation Exposure Statement WARNING: The radiated output power of the Dell Wireless WLAN Card devices is far below the FCC radio frequency exposure limits. Nevertheless, the Dell Wireless WLAN Card devices should be used in such a manner that the potential for human contact during normal operation is minimized. To avoid the possibility of exceeding the FCC radio frequency exposure limits, you should keep a distance of at least 20 cm between you (or any other person in the vicinity) and the antenna that is built into the printer. To determine the location of the antenna within your printer, check the information posted on the general Dell support site at http://support.dell.com . This device has also been evaluated for and shown compliant with the FCC RF exposure limits under portable exposure conditions (antennas are within 20 cm of a person's body) when installed in certain specific OEM configurations. Details of the authorized configurations can be found at http://www.fcc.gov/oet/fccid/help.html by entering the FCC ID number on the device. Interference Statement This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer's instruction manual, may cause interference with radio and television reception. This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference. 2) This device must accept any interference received, including interference that may cause undesired operation. Notice: The FCC regulations provide that changes or modifications not expressly approved by Dell Inc. could void your authority to operate this equipment. These limits are designed to provide reasonable protection against harmful interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference with radio or television reception, which can be determined by turning the equipment off and on, you are encouraged to try to correct the interference by one or more of the following measures: • Reorient the receiving antenna. • Relocate the system with respect to the receiver. • Move the system away from the receiver. • Plug the system into a different outlet so that the system and the receiver are on different branch circuits. If necessary, consult a representative of Dell Inc. or an experienced radio/television technician for additional suggestions. NOTE: This Dell Wireless WLAN Card must be installed and used in strict accordance with the manufacturer's instructions as described in the user documentation that comes with the product. Any other installation or use will violate FCC Part 15 regulations. Modifications not expressly approved by Dell could void your authority to operate the equipment. This device must not be co-located or operating in conjunction with any other antenna or transmitter.

One Dell Way Round Rock, Texas 78682 United States Dell - Restricted - Confidential Date: 2014-08-29 We have declared below featured for device identified as FCC ID: E2K-T02E001 IC: 1514B-T02E001 (1) DFS Device -- Master, Client with Radar detection capability , Client without radar detection capability, N/A (2) Active / Passive Scanning , adhoc mode access point capability Frequency Band (MHz) Scanning Plan Ad Hoc Mode capability Access point capability WiFi Direct Group Owner WiFi Direct Group Client 2412 – 2462 Active Yes Yes Yes Yes 5745 – 5825 Active Yes Yes Yes Yes 5180 – 5240 Passive No No No Yes 5260 – 5320 Passive No No No Yes 5500 – 5700 Passive No No No Yes (3) Country code selection ability - Yes , No If yes, pls explain how it was implemented : (pls also help to provide detail of options for each country selection) (4) Transmission in 5600 MHz to 5650 MHz is notched - Yes , No (5) Meet Part 15.202 requirement - Yes , No , * A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices * A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network. (6) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes can not be modified by end user or an installer. Apply , No Apply , (If apply , pls help to provide explanation on it was implement , and how software was controlled) Sincerely yours ----------------------------------- Name: Angelica Chang Company Name: Dell Inc. Address: 11F,No.218,Sec.2, Tun Hua S.Road Taipei, Taiwan, R.O.C TEL: (886)2- 2376-6368 FAX: (886)2- 2736-9067 Email: [email protected]

Dell Inc. Richard Worley, NCE MS: PS4-30 EMC, Global Regulations and Standards One Dell Way Telephone 512.728.1081 Round Rock, Texas 78682 Telefax 512.283.9268 www.dell.com e-mail [email protected] Worldwide Regulatory Compliance Engineering & Environmental Affairs Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 April 9, 2014 FCC authorization letter for Dell Regulatory employees To whom it may concern, I, the undersigned, as the authorized signatory for the Dell Inc. grantee code E2K, hereby authorize the following EMC & Wireless Regulatory Engineers of Dell Inc., to act on my behalf as our agent in all manners relating to processes required according to FCC rules for equipment authorization: Thanh Nguyen Fiona Y Chen Don Bobo Jason KP Lee Adele Huang Steve L Williams Rick Linford James Carrillo Benton S Ng Alden Neilson Angelica Chang This authorization shall be sent along with application when filing with the FCC Certification Division and is valid until further written notice from the applicant. If you have any questions or need additional information, please feel free to contact me at 512-728-1081 or 512-431-1084. Sincerely, Richard Worley Dell Inc. FRN: 0008359580

One Dell Way Round Rock, Texas 78682 United States Dell - Restricted - Confidential Date: 2014-08-29 FCC ID: E2K-T02E001 A U T H O R I Z A T I O N L E T T E R To whom it may concern: We, the undersigned Dell Inc. hereby authorize Jones Tsai of Sporton International Inc. to act on our behalf in all matters relating to all processes required in FCC and any communication needed with the national authority. Any and all acts carried out by Jones Tsai of Sporton International Inc. on our behalf shall have the same effects as acts of our own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you! Sincerely yours, ----------------------------------- Name: Angelica Chang Company Name: Dell Inc. Address: 11F,No.218,Sec.2, Tun Hua S.Road Taipei, Taiwan, R.O.C TEL: (886)2- 2376-6368 FAX: (886)2- 2736-9067 Email: [email protected]

One Dell Way Round Rock, Texas 78682 United States Date: 2014-09-02 FCC ID: E2K-T02E001 To the attention of Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram Parts List Operational Description Tune up Procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, Angelica Chang Dell Inc. TEL: (886)2- 2376-6368 FAX: (886)2- 2736-9067 Email: [email protected]

FCC Test Report Report No. : EP481209 SPORTON International Inc. PAGE NUMBER : B1 OF B14 TEL : 886-3-327-3456 ISSUED DATE : Sep. 4, 2014 FAX : 886-3-327-0973 APPENDIX B. Photographs of EUT FCC Test Report Report No. : EP481209 SPORTON International Inc. PAGE NUMBER : B2 OF B14 TEL : 886-3-327-3456 ISSUED DATE : Sep. 4, 2014 FAX : 886-3-327-0973

Back of the device

FCC Test Report Report No. : EP481209 SPORTON International Inc. PAGE NUMBER : B3 OF B14 TEL : 886-3-327-3456 ISSUED DATE : Sep. 4, 2014 FAX : 886-3-327-0973 FCC Test Report Report No. : EP481209 SPORTON International Inc. PAGE NUMBER : B4 OF B14 TEL : 886-3-327-3456 ISSUED DATE : Sep. 4, 2014 FAX : 886-3-327-0973 FCC Test Report Report No. : EP481209 SPORTON International Inc. PAGE NUMBER : B5 OF B14 TEL : 886-3-327-3456 ISSUED DATE : Sep. 4, 2014 FAX : 886-3-327-0973 FCC Test Report Report No. : EP481209 SPORTON International Inc. PAGE NUMBER : B6 OF B14 TEL : 886-3-327-3456 ISSUED DATE : Sep. 4, 2014 FAX : 886-3-327-0973 WiFi and Bluetooth Ant. FCC Test Report Report No. : EP481209 SPORTON International Inc. PAGE NUMBER : B7 OF B14 TEL : 886-3-327-3456 ISSUED DATE : Sep. 4, 2014 FAX : 886-3-327-0973 WiFi and Bluetooth Chip FCC Test Report Report No. : EP481209 SPORTON International Inc. PAGE NUMBER : B8 OF B14 TEL : 886-3-327-3456 ISSUED DATE : Sep. 4, 2014 FAX : 886-3-327-0973 FCC Test Report Report No. : EP481209 SPORTON International Inc. PAGE NUMBER : B9 OF B14 TEL : 886-3-327-3456 ISSUED DATE : Sep. 4, 2014 FAX : 886-3-327-0973 WiFi and Bluetooth Chip FCC Test Report Report No. : EP481209 SPORTON International Inc. PAGE NUMBER : B10 OF B14 TEL : 886-3-327-3456 ISSUED DATE : Sep. 4, 2014 FAX : 886-3-327-0973 FCC Test Report Report No. : EP481209 SPORTON International Inc. PAGE NUMBER : B11 OF B14 TEL : 886-3-327-3456 ISSUED DATE : Sep. 4, 2014 FAX : 886-3-327-0973 FCC Test Report Report No. : EP481209 SPORTON International Inc. PAGE NUMBER : B12 OF B14 TEL : 886-3-327-3456 ISSUED DATE : Sep. 4, 2014 FAX : 886-3-327-0973 FCC Test Report Report No. : EP481209 SPORTON International Inc. PAGE NUMBER : B13 OF B14 TEL : 886-3-327-3456 ISSUED DATE : Sep. 4, 2014 FAX : 886-3-327-0973 FCC Test Report Report No. : EP481209 SPORTON International Inc. PAGE NUMBER : B14 OF B14 TEL : 886-3-327-3456 ISSUED DATE : Sep. 4, 2014 FAX : 886-3-327-0973

SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 / FAX : 886-3-328-4978 Issued Date : Nov. 12, 2014 FCC ID : E2K-T02E001 Page 1 of 28 Form version. : 140820 FCC SAR Test Report Report No. : FA481209-06 FCC SAR Test Report APPLICANT : Dell Inc. EQUIPMENT : Tablet PC BRAND NAME : DELL MODEL NAME : T02E; T02E001 FCC ID : E2K-T02E001 STANDARD : FCC 47 CFR Part 2 (2.1093) ANSI/IEEE C95.1-1992 IEEE 1528-2003 We, SPORTON INTERNATIONAL INC., would like to declare that the tested sample has been evaluated in accordance with the procedures and had been in compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC., the test report shall not be reproduced except in full. SPORTON INTERNATIONAL INC. No. 52, Hwa Ya 1 st Rd., Hwa Ya Technology Park, Kwei-Shan Hsiang, Tao Yuan Hsien, Taiwan, R.O.C. Approved by: Jones Tsai / Manager Reviewed by: Eric Huang / Deputy Manager SPORTON INTERNATIONAL INC. TEL : 886-3-327-3456 / FAX : 886-3-328-4978 Issued Date : Nov. 12, 2014 FCC ID : E2K-T02E001 Page 2 of 28 Form version. : 140820 FCC SAR Test Report Report No. : FA481209-06 Table of Contents 1. Statement of Compliance ............................................................................................................................................. 4 2. Administration Data ...................................................................................................................................................... 4 3. Guidance Standard ....................................................................................................................................................... 5 4. Equipment Under Test (EUT) ....................................................................................................................................... 5 4.1 General Information ............................................................................................................................................... 5 4.2 Maximum Tune-up Limit ......................................................................................................................................... 6 5. RF Exposure Limits....................................................................................................................................................... 7 5.1 Uncontrolled Environment ...................................................................................................................................... 7 5.2 Controlled Environment .......................................................................................................................................... 7 6. Specific Absorption Rate (SAR) ................................................................................................................................... 8 6.1 Introduction ............................................................................................................................................................ 8 6.2 SAR Definition ........................................................................................................................................................ 8 7. System Description and Setup .................................................................................................................................... 9 8. Measurement Procedures ...........................................................................................................................................10 8.1 Spatial Peak SAR Evaluation ................................................................................................................................10 8.2 Power Reference Measurement............................................................................................................................ 11 8.3 Area Scan ............................................................................................................................................................. 11 8.4 Zoom Scan ............................................................................................................................................................12 8.5 Volume Scan Procedures ......................................................................................................................................12 8.6 Power Drift Monitoring ...........................................................................................................................................12 9. Test Equipment List .....................................................................................................................................................13 10. System Verification ....................................................................................................................................................14 10.1 Tissue Verification ...............................................................................................................................................14 10.2 System Performance Check Results ...................................................................................................................15 11. RF Exposure Positions ..............................................................................................................................................15 11.1 SAR Testing for Tablet .........................................................................................................................................15 12. Conducted RF Output Power (Unit: dBm) ................................................................................................................16 13. Antenna Location .......................................................................................................................................................20 14. SAR Test Results ..........................…

Text truncated - open the document above for the full version.

Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2014/8/25 System Check_Body_2450MHz_140825 DUT: D2450V2-869 Communication System: CW; Frequency: 2450 MHz;Duty Cycle: 1:1 Medium: MSL_2450_140825 Medium parameters used: f = 2450 MHz; σ = 1.964 S/m; ε r = 53.315; ρ = 1000 kg/m 3 23.2 22.2 DASY5 Configuration - Probe: EX3DV4 - SN3954; ConvF(7.34, 7.34, 7.34); Calibrated: 2013/11/4; - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1425; Calibrated: 2014/3/3 - Phantom: ELI v4.0; Type: QDOVA001BB; Serial: 1173 - Measurement SW: DASY52, Version 52.8 (7); SEMCAD X Version 14.6.10 (7164) Configuration/Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 21.3 W/kg Configuration/Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 105.0 V/m; Power Drift = -0.15 dB Peak SAR (extrapolated) = 24.3 W/kg SAR(1 g) = 12.5 W/kg; SAR(10 g) = 5.92 W/kg Maximum value of SAR (measured) = 18.5 W/kg 0 dB = 18.5 W/kg = 12.67 dBW/kg Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2014/8/27 System Check_Body_2450MHz_140827 DUT: D2450V2-869 Communication System: CW; Frequency: 2450 MHz;Duty Cycle: 1:1 Medium: MSL_2450_140827 Medium parameters used: f = 2450 MHz; σ = 2.028 S/m; ε r = 51.91; ρ = 1000 kg/m 3 23.4 22.4 DASY5 Configuration: - Probe: EX3DV4 - SN3954; ConvF(7.34, 7.34, 7.34); Calibrated: 2013/11/4; - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1425; Calibrated: 2014/3/3 - Phantom: ELI v4.0; Type: QDOVA001BB; Serial: TP:1127 - Measurement SW: DASY52, Version 52.8 (6);SEMCAD X Version 14.6.9 (7117) Configuration/Pin=250mW/Area Scan (61x61x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 22.0 W/kg Configuration/Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 105.0 V/m; Power Drift = -0.15 dB Peak SAR (extrapolated) = 25.1 W/kg SAR(1 g) = 12.9 W/kg; SAR(10 g) = 6.11 W/kg Maximum value of SAR (measured) = 19.1 W/kg 0 dB = 19.1 W/kg = 12.81 dBW/kg Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2014/8/23 System Check_Body_5200MHz_140823 DUT: D5GHzV2-1128 Communication System: CW ; Frequency: 5200 MHz;Duty Cycle: 1:1 Medium: MSL_5G_140823 Medium parameters used: f = 5200 MHz; σ = 5.44 S/m; ε r = 47.639; ρ = 1000 kg/m 3 23.3 22.3 DASY5 Configuration - Probe: EX3DV4 - SN3954; ConvF(4.52, 4.52, 4.52); Calibrated: 2013/11/4; - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1425; Calibrated: 2014/3/3 - Phantom: ELI v4.0; Type: QDOVA001BB; Serial: 1173 - Measurement SW: DASY52, Version 52.8 (7); SEMCAD X Version 14.6.10 (7164) Configuration/Pin=100mW/Area Scan (71x71x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 18.5 W/kg Configuration/Pin=100mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 63.984 V/m; Power Drift = -0.06 dB Peak SAR (extrapolated) = 31.1 W/kg SAR(1 g) = 7.15 W/kg; SAR(10 g) = 1.95 W/kg Maximum value of SAR (measured) = 18.2 W/kg 0 dB = 18.2 W/kg = 12.60 dBW/kg Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2014/8/23 System Check_Body_5300MHz_140823 DUT: D5GHzV2-1128 Communication System: CW ; Frequency: 5300 MHz;Duty Cycle: 1:1 Medium: MSL_5G_140823 Medium parameters used: f = 5300 MHz; σ = 5.573 S/m; ε r = 47.473; ρ = 1000 kg/m 3 23.3 22.3 DASY5 Configuration - Probe: EX3DV4 - SN3954; ConvF(4.28, 4.28, 4.28); Calibrated: 2013/11/4; - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1425; Calibrated: 2014/3/3 - Phantom: ELI v4.0; Type: QDOVA001BB; Serial: 1173 - Measurement SW: DASY52, Version 52.8 (7); SEMCAD X Version 14.6.10 (7164) Configuration/Pin=100mW/Area Scan (71x71x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 20.7 W/kg Configuration/Pin=100mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 66.671 V/m; Power Drift = -0.01 dB Peak SAR (extrapolated) = 31.1 W/kg SAR(1 g) = 8.1 W/kg; SAR(10 g) = 2.27 W/kg Maximum value of SAR (measured) = 19.8 W/kg 0 dB = 19.8 W/kg = 12.97 dBW/kg Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2014/8/24 System Check_Body_5600MHz_140824 DUT: D5GHzV2-1128 Communication System: CW; Frequency: 5600 MHz;Duty Cycle: 1:1 Medium: MSL_5G_140824 Medium parameters used: f = 5600 MHz; σ = 5.642 S/m; ε r = 46.786; ρ = 1000 kg/m 3 23.3 22.3 DASY5 Configuration - Probe: EX3DV4 - SN3954; ConvF(3.97, 3.97, 3.97); Calibrated: 2013/11/4; - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1425; Calibrated: 2014/3/3 - Phantom: ELI v4.0; Type: QDOVA001BB; Serial: 1173 - Measurement SW: DASY52, Version 52.8 (7); SEMCAD X Version 14.6.10 (7164) Configuration/Pin=100mW/Area Scan (71x71x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 19.1 W/kg Configuration/Pin=100mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 65.255 V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) = 35.2 W/kg SAR(1 g) = 7.52 W/kg; SAR(10 g) = 2.02 W/kg Maximum value of SAR (measured) = 19.6 W/kg 0 dB = 19.6 W/kg = 12.92 dBW/kg Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2014/8/24 System Check_Body_5800MHz_140824 DUT: D5GHzV2-1128 Communication System: CW; Frequency: 5800 MHz;Duty Cycle: 1:1 Medium: MSL_5G_140824 Medium parameters used: f = 5800 MHz; σ = 5.981 S/m; ε r = 46.515; ρ = 1000 kg/m 3 23.3 22.3 DASY5 Configuration - Probe: EX3DV4 - SN3954; ConvF(4.08, 4.08, 4.08); Calibrated: 2013/11/4; - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1425; Calibrated: 2014/3/3 - Phantom: ELI v4.0; Type: QDOVA001BB; Serial: 1173 - Measurement SW: DASY52, Version 52.8 (7); SEMCAD X Version 14.6.10 (7164) Configura…

Text truncated - open the document above for the full version.

Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2014/8/25 #01_WLAN2.4GHz_802.11b 1Mbps_Edge 4_0cm_Ch1 Communication System: 802.11b ; Frequency: 2412 MHz;Duty Cycle: 1:1 Medium: MSL_2450_140825 Medium parameters used: f = 2412 MHz; σ = 1.917 S/m; ε r = 53.481; ρ = 1000 kg/m 3 23.2 22.2 DASY5 Configuration - Probe: EX3DV4 - SN3954; ConvF(7.34, 7.34, 7.34); Calibrated: 2013/11/4; - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1425; Calibrated: 2014/3/3 - Phantom: ELI v4.0; Type: QDOVA001BB; Serial: 1173 - Measurement SW: DASY52, Version 52.8 (7); SEMCAD X Version 14.6.10 (7164) Configuration/Ch1/Area Scan (41x81x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 2.33 W/kg Configuration/Ch1/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 34.589 V/m; Power Drift = -0.14 dB Peak SAR (extrapolated) = 4.26 W/kg SAR(1 g) = 1.22 W/kg; SAR(10 g) = 0.390 W/kg Maximum value of SAR (measured) = 2.23 W/kg 0 dB = 2.23 W/kg = 3.48 dBW/kg Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2014/8/23 #02_WLAN5GHz_802.11ac-VHT80 MCS0_Edge 4_0cm_Ch42 Communication System: 802.11ac ; Frequency: 5210 MHz;Duty Cycle: 1:1.154 Medium: MSL_5G_140823 Medium parameters used: f = 5210 MHz; σ = 5.455 S/m; ε r = 47.623; ρ = 1000 kg/m 3 23.3 22.3 DASY5 Configuration - Probe: EX3DV4 - SN3954; ConvF(4.52, 4.52, 4.52); Calibrated: 2013/11/4; - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1425; Calibrated: 2014/3/3 - Phantom: ELI v4.0; Type: QDOVA001BB; Serial: 1173 - Measurement SW: DASY52, Version 52.8 (7); SEMCAD X Version 14.6.10 (7164) Configuration/Ch42/Area Scan (31x91x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 2.02 W/kg Configuration/Ch42/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 23.994 V/m; Power Drift = -0.11 dB Peak SAR (extrapolated) = 5.00 W/kg SAR(1 g) = 0.833 W/kg; SAR(10 g) = 0.184 W/kg Maximum value of SAR (measured) = 2.57 W/kg 0 dB = 2.57 W/kg = 4.10 dBW/kg Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2014/8/23 #03_WLAN5GHz_802.11ac-VHT80 MCS0_Edge 4_0cm_Ch58 Communication System: 802.11ac ; Frequency: 5290 MHz;Duty Cycle: 1:1.154 Medium: MSL_5G_140823 Medium parameters used: f = 5290 MHz; σ = 5.561 S/m; ε r = 47.489; ρ = 1000 kg/m 3 23.3 22.3 DASY5 Configuration - Probe: EX3DV4 - SN3954; ConvF(4.28, 4.28, 4.28); Calibrated: 2013/11/4; - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1425; Calibrated: 2014/3/3 - Phantom: ELI v4.0; Type: QDOVA001BB; Serial: 1173 - Measurement SW: DASY52, Version 52.8 (7); SEMCAD X Version 14.6.10 (7164) Configuration/Ch58/Area Scan (31x91x1): Interpolated grid: dx=1.000 mm, dy=1.000 mm Maximum value of SAR (interpolated) = 2.33 W/kg Configuration/Ch58/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=1.4mm Reference Value = 25.752 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) = 5.98 W/kg SAR(1 g) = 1.01 W/kg; SAR(10 g) = 0.227 W/kg Maximum value of SAR (measured) = 3.12 W/kg 0 dB = 3.12 W/kg = 4.94 dBW/kg Test Laboratory: Sporton International Inc. SAR/HAC Testing Lab Date: 2014/8/24 #04_WLAN5GHz_802.11a 6Mbps_Edge 4_0cm_Ch136 Communication System: 802.11a ; Frequency: 5680 MHz;Duty Cycle: 1:1.05 Medium: MSL_5G_140824 Medium parameters used : f = 5680 MHz; σ = 5.781 S/m; ε r = 46.704; ρ = 1000 kg/m 3 23.3 22.3 DASY5 Configuration - Probe: EX3DV4 - SN3954; ConvF(3.97, 3.97, 3.97); Calibrated: 2013/11/4; -…

Text truncated - open the document above for the full version.