E2XST-GM6000ESL Graphic TAG

S-TAG Datasheet(ST-GM6000) Preliminary S- TAG Datasheet S- L abel (Electronic Label System) REV 0. 4 Sa msung Electro-Mechanics 2014-11-21 Summary This datasheet presents the general performance and specifications of S-Tag for S- Label ESL (Electronic Shelf Label) system, which is based on IEEE 802.15.4. © 2014 Samsung Electro-Mechanics. All rights reserved The names of actual companies and products mentioned herein may be the trademarks of their respective owners. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means without the express written consent of Samsung Electro- Mechanics. This document is subject to change without notice. REV 0.4 Samsung Electro-Mechanics Proprietary and Confidential 1/13 S-TAG Datasheet(ST-GM6000) Preliminary Table of Contents 1 GENERAL DESCRIPTION ..................................................................................................... 4 1.1 F EATURES .............................................................................................................................. 5 1.2 TYPICAL APPLICATIONS .............................................................................................................. 5 1.3 A PPEARANCE ........................................................................................................................... 5 2 SPECIFICATION .................................................................................................................. 6 2.1 P RODUCT SPECIFICATION ........................................................................................................... 6 2.2 R ADIO (RF) SPECIFICATION........................................................................................................ 7 2.3 M ECHANICAL DRAWING ............................................................................................................. 7 2.4 L ABELS .................................................................................................................................. 8 3 PACKAGE ........................................................................................................................... 10 4 CAUTIONS FOR TREATMENT............................................................................................. 12 4.1 U SAGE ENVIRONMENT ............................................................................................................. 12 4.2 S TORAGE AND USE ................................................................................................................. 12 REV 0.4 Samsung Electro-Mechanics Proprietary and Confidential 2/13 S-TAG Datasheet(ST-GM6000) Preliminary Document History Rev. Date Revision history Page 0.1 24 Mar 2014 Initial release - 0.2 23 May 2014 Product Spec typo correction / Label Spec Update 5,10 0.3 17 Jul 2014 RF Spec / Mechanical drawing / Label Spec Update 7-9 0.4 21 Nov 2014 Label spec / Packing Spec update 9-11 REV 0.4 Samsung Electro-Mechanics Proprietary and Confidential 3/13 S-TAG Datasheet(ST-GM6000) Preliminary 1 General Description This S-Tag product is a part of Samsung S-Label (Electronic Shelf Label) system as well as S-Label Gateway (S-Gate), Remote controller (S-RC). S-Label system make up a system that electronically displays price and other product information on S-Tags, which has been traditionally printed or written on paper in places like retail markets. S -Tag receives product price/information updates from S-Gate and updates or changes its display of price and other information. S -Tag is the product based on IEEE standard 802.15.4 for low power wireless communication applications. S-Tag consists of RF transceiver, RF circuitry and 8051-compatible MCU offering IEEE 802.15.4 based network protocol and MAC protocol and other peripheral devices. REV 0.4 Samsung Electro-Mechanics Proprietary and Confidential 4/13 S-TAG Datasheet(ST-GM6000) Preliminary 1.1 Features - Display : E-Paper active type Display (6.0 Inch, 212 Dpi, 758 * 1024 Pixel) - Communication : Wireless communication based on IEEE 802.15.4 - Operating on 2.4GHz Unlicensed ISM band for ZigBee - Low Power Consumption - External Wakeup : Magnetic Wakeup (using Reed switch) - Outline Dimension : 152.80 mm x 107.10 mm x 16.00 mm - Working condition: Indoor where wireless communication is available. 1.2 Typical Applications - Retail industry with electronic displays, platforms, solutions and services. - Intelligently communicating, managing, and optimizing price and product informations. 1.3 Appearance Figure 1 Appearance REV 0.4 Samsung Electro-Mechanics Proprietary and Confidential 5/13 S-TAG Datasheet(ST-GM6000) Preliminary 2 Specification 2.1 Product Specification Item Description Size 152.80 mm x 107.10 mm x 16.00 mm Battery CR2450 Lithium Battery (3V, 8PCS) (Operating Voltage : 6V) Display E-Paper active type Display (122.37 * 90.58 mm, 212 Dpi, 758 * 1024 Pixel) Housing Color White Information display Price, Unit, Symbol etc. Communication Wireless communication based on IEEE 802.15.4 Communication Distance Radius 20m ( Line of Sight) Operation Temp. 5 ~ 40 °C (@20~60% RH) Etc. No additional anti-theft locking structure : Rail Mounted only REV 0.4 Samsung Electro-Mechanics Proprietary and Confidential 6/13 S-TAG Datasheet(ST-GM6000) Preliminary 2.2 Radio (RF) 1 Specification Item Parameter SPEC Unit Condition Min Typ Max TX Transmit Power -2 3.5 5 dBm Error Vector Magnitude 10 30 % When measured for 100 chips Tx Current 10 14 35 mA Total current at max Tx Power RX Receiver Sensitivity -90 - - dBm PER < 1% 2.3 Mechanical Drawing Figure 3 Mechanical Dimension 1 Test Channel : 2480MHz (Rx : Depending on the situation, flexibly select.) REV 0.4 Samsung Electro-Mechanics Proprietary and Confidential 7/13 S-TAG Datasheet(ST-GM6000) Preliminary 2.4 Labels 2.4.1 Serial Number I nformation Serial 1, 2 Code Value 13 Y 5 S A A 2JW ① ② ③ ④ ⑤ ⑥ ⑦ ① Year : Last two digits of manufacturing year. (00 ~ 99, Ex…

Text truncated - open the document above for the full version.

S-TAG Datasheet(ST-GM6000N) Preliminary REV 0.1 Samsung Electro-Mechanics Proprietary and Confidential 1/14 CUSTOMER APPROVAL SHEET Company Name MODEL ST-GM6000N CUSTOMER APPROVAL □ APPROVAL FOR SPECIFICATIONS ONLY (Spec. Ver. 0.1 ) □ CUSTOMER REMARK : Issued By Checked By Approved By ES Kim DS Yoon JG Ryu Samsung Electro-Mechanics 314, Maetan3-Dong, YoungTong-Gu, Suwon, Gyunggi-Do, Korea Tel : 82-31-210-5114 S-TAG Datasheet(ST-GM6000N) Preliminary REV 0.1 Samsung Electro-Mechanics Proprietary and Confidential 2/14 S-TAG Datasheet S-Label (Electronic Label System) REV 0.1 Samsung Electro-Mechanics 2015-01-12 Summary This datasheet presents the general performance and specifications of S-Tag for S-Label ESL (Electronic Shelf Label) system, which is based on IEEE 802.15.4. © 2015 Samsung Electro-Mechanics. All rights reserved The names of actual companies and products mentioned herein may be the trademarks of their respective owners. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means without the express written consent of Samsung Electro- Mechanics. This document is subject to change without notice. S-TAG Datasheet(ST-GM6000N) Preliminary REV 0.1 Samsung Electro-Mechanics Proprietary and Confidential 3/14 Table of Contents 1 GENERAL DESCRIPTION ..................................................................................................... 5 1.1 F EATURES ......................................................................................................................... 6 1.2 TYPICAL APPLICATIONS ......................................................................................................... 6 1.3 APPEARANCE ...................................................................................................................... 6 2 SPECIFICATION .................................................................................................................. 7 2.1 PRODUCT SPECIFICATION ....................................................................................................... 7 2.2 RADIO (RF) SPECIFICATION ................................................................................................... 7 2.3 NFC SPECIFICATION............................................................................................................. 8 2.4 MECHANICAL DRAWING ......................................................................................................... 8 2.5 LABELS ............................................................................................................................. 9 3 PACKAGE ........................................................................................................................... 11 4 CAUTIONS FOR TREATMENT............................................................................................. 13 4.1 U SAGE ENVIRONMENT .......................................................................................................... 13 4.2 STORAGE AND USE .............................................................................................................. 13 S-TAG Datasheet(ST-GM6000N) Preliminary REV 0.1 Samsung Electro-Mechanics Proprietary and Confidential 4/14 Document History Rev. Date Revision history Page 0.1 12 Jan 2015 Initial release - S-TAG Datasheet(ST-GM6000N) Preliminary REV 0.1 Samsung Electro-Mechanics Proprietary and Confidential 5/14 1 General Description This S-Tag product is a part of Samsung S-Label (Electronic Shelf Label) system as well as S-Label Gateway (S-Gate), Remote controller (S-RC). S-Label system make up a system that electronically displays price and other product information on S-Tags, which has been traditionally printed or written on paper in places like retail markets. S-Tag receives product price/information updates from S-Gate and updates or changes its display of price and other information. S-Tag is the product based on IEEE standard 802.15.4 for low power wireless communication applications. S-Tag consists of RF transceiver, RF circuitry and 8051-compatible MCU offering IEEE 802.15.4 based network protocol and MAC protocol and other peripheral devices. S-TAG Datasheet(ST-GM6000N) Preliminary REV 0.1 Samsung Electro-Mechanics Proprietary and Confidential 6/14 1.1 Features - Display : E-Paper active type Display (6.0 Inch, 212 Dpi, 758 * 1024 Pixel) - Communication : Wireless communication based on IEEE 802.15.4 - Operating on 2.4GHz Unlicensed ISM band for ZigBee - Low Power Consumption - External Wakeup : Magnetic Wakeup - Outline Dimension : 152.80 mm x 107.10 mm x 16.00 mm - Working condition: Indoor where wireless communication is available. - NFC (13.56MHz) 1.2 Typical Applications - Retail industry with electronic displays, platforms, solutions and services. - Intelligently communicating, managing, and optimizing price and product informations. 1.3 Appearance Figure 1 Appearance S-TAG Datasheet(ST-GM6000N) Preliminary REV 0.1 Samsung Electro-Mechanics Proprietary and Confidential 7/14 2 Specification 2.1 Product Specification Item Description Size 152.80 mm x 107.10 mm x 16.00 mm Battery CR2450 Lithium Battery (3V, 8PCS) / Operating Voltage : 6V Display E-Paper active type Display (122.37 * 90.58 mm, 212 Dpi, 758 * 1024 Pixel) Housing Color White Information display Price, Unit, Symbol etc. Communication Wireless communication based on IEEE 802.15.4 Communication Distance Radius 20m (Line of Sight) Operation Temp. 5 ~ 40 °C (@20~60% RH) Etc. No additional anti-theft locking structure : Rail Mounted only NFC (13.56MHz) available 2.2 Radio (RF) 1 Specification Item Parameter SPEC Unit Condition Min Typ Max TX Transmit Power -2 3.5 5 dBm Error Vector Magnitude 10 30 % When measured for 100 chips Tx Current 10 14 35 mA Total current at max Tx Power RX Receiver Sensitivity -90 - - dBm PER < 1% 1 Test Channel : 2480MHz S-TAG Datasheet(ST-GM6000N) Preliminary REV 0.1 Samsung Electro-Mechanics Proprie…

Text truncated - open the document above for the full version.

SAMSUN G ELECTRO-MECHANICS CO.,LTD 150, Maeyeong-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, Korea Dec. 26, 2014 Applicant Type of Product FCC ID Model Name Add Model Name : S AMSUNG ELECTRO-MECHANICS CO.,LTD. : ESL Graphic T AG : E2XST-GM6000 : ST-GM6000 : ST-GM6000N We would like to add the variant mode that it’s ST-GM6000N, it doesn’t differ with electric and circuit because this model is adhered only NFC TAG on the PCB to basic model. This NFC tag which is attached to the ST-GM6000 is passive device with no power of its own. This NFC tag is only contains information that other NFC device can read but does not read any information itself. ST-GM6000 and ST-GM6000N is composed of the same circuit and the same PCB board. Just only difference is that NFC tag is attached on product or not. Sincerely, Dongsik Yoon / Principal Engineer

314 Maetan-3 Dong Pal Dal-Ku Kyungki-Do, Suwon-City, Korea, 442-743 Date: Dec. 17, 2014 Letter of Authorization We, the undersigned, hereby authorize Harvey Sung of DT&C Co., Ltd. to act on our behalf in all manners relating to application for equipment authorization for FCCID: E2XST-GM6000 including signing of all documents relating to these matters. Any and all acts carried out by Harvey Sung of DT&C Co., Ltd. on our behalf shall have the same affect as acts of our own. This authorization is valid until further written notice from Samsung Electro Mechanics “I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a).” Sincerely, Jin Hwan, Lim Assistant Manager

Samsung Electro Mechanics 314, Maethan-3 Dong, Paldal-Ku, Kyungki-Do, Suwon-City, Korea, 442-743 Date: Dec. 17, 2014 UL Verification Services Inc. 47173 Benicia Street Fremont, CA 94538, USA RE: Request of Confidentiality for FCCID: E2XST-GM6000 To Whom It may Concern: Pursuant to Sections 0.457 and 0.459 of the Commission`s Rules(CFR 47), and Section 552 (b) (4) of the Freedom of Information Act, Samsung Electro Mechanics hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA 04-1705. This provision will give Samsung Electro Mechanics temporary confidentiality of commercially sensitive information prior to product release. The requested permanent and Short-Term Confidential exhibits are listed as follows: PERMANENT & SHORT-TERM CONFIDENTIAL LIST Exhibit Description PERMANENT 1 Block Diagram 2 Schematics 3 Part Lists 4 Operation Description SHORT-TERM 5 Internal Photos 6 External Photos 7 Test-Setup Photos 8 User Manual The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be public before the date of the Grant for this application. Sincerely, Jin Hwan, Lim Manager

FCCID: E2XST-GM6000 Copyright Ⓒ 2015, DT&C Co., Ltd. External Photo ST-GM6000 FCCID: E2XST-GM6000 Copyright Ⓒ 2015, DT&C Co., Ltd. View 1 FCCID: E2XST-GM6000 Copyright Ⓒ 2015, DT&C Co., Ltd. View 2 FCCID: E2XST-GM6000 Copyright Ⓒ 2015, DT&C Co., Ltd. View 3 FCCID: E2XST-GM6000 Copyright Ⓒ 2015, DT&C Co., Ltd. External Photo ST-GM6000N FCCID: E2XST-GM6000 Copyright Ⓒ 2015, DT&C Co., Ltd. View 1 FCCID: E2XST-GM6000 Copyright Ⓒ 2015, DT&C Co., Ltd. View 2 FCCID: E2XST-GM6000 Copyright Ⓒ 2015, DT&C Co., Ltd. View 3

FCC ID : E2XST-GM6000 Copyright Ⓒ 2014, DT&C Co., Ltd. FCC ID SAMPLE LABEL & LOCATION LABELLING REQUIREMENTS PER §2.925 The Label shown shall be permanently affixed at a conspicuous location on the battery cover of the device and be readily visible to the user at the time of purchase. If the battery cover is removed, this device does not work. - The FCC label shown is representative of the label that will appear on the radio when in production. Other information may also be included in the user manual.

FCCID: E2XST-GM6000 Copyright Ⓒ 2015, DT&C Co., Ltd. Page1 / 8 Internal Photo ST-GM6000 FCCID: E2XST-GM6000 Copyright Ⓒ 2015, DT&C Co., Ltd. Page2 / 8 View 1 FCCID: E2XST-GM6000 Copyright Ⓒ 2015, DT&C Co., Ltd. Page3 / 8 View 2 FCCID: E2XST-GM6000 Copyright Ⓒ 2015, DT&C Co., Ltd. Page4 / 8 View 3 FCCID: E2XST-GM6000 Copyright Ⓒ 2015, DT&C Co., Ltd. Page5 / 8 Internal Photo ST-GM6000N FCCID: E2XST-GM6000 Copyright Ⓒ 2015, DT&C Co., Ltd. Page6 / 8 View 1 FCCID: E2XST-GM6000 Copyright Ⓒ 2015, DT&C Co., Ltd. Page7 / 8 View 2 FCCID: E2XST-GM6000 Copyright Ⓒ 2015, DT&C Co., Ltd. Page8 / 8 View 3

Portable device Movile device Simultaneous Transmitting MHzmm dBi =( ) Single Transmitting Max. Typical Power = - Transmitting mode = December 16, 2014 FCC ID : E2XST-GM6000 KDB 447498 D01 clasue 4.3.1 Step 2- 2) SAR test exclusion thres holds for 1500MHz to 6GHz at test separationn distances > 50 mm - Device category = Standalone SAR test exclusion considerations 200 - Max. power with turn-up tolerance = 3.2 2480 - Min. test separ ation distance = mW 5.00 - Max. transmitting frequency = - Max. Antenna Gain = 1.61 [Th h ld t50 (t t ti dit 50 )X10] W 5.00 dBm Note. dBm = [ 0.03 + ( 200mm - 50mm X 10 ) ] = 1500 Note. The calculation result was rounded to one decimal place f or comparison. Maximum power density Numeric power gain of the antenna Maximum power with turn-up toler ance Distance from transmitting antenna 2 2 S = 2 P , ㎽/㎝ π Maximum Permissible Exposure(MPE) evaluation for mobile device [ Th res h o ld a t 50 mm + ( t es t separa ti on di s t ance - 50 mm ) X 10 ] m W Copyright ⓒ 2014 DT&C Co Ltd 1.000000 ㎽/㎝ G → SAR evaluation for general population exposure conditions by measurement or numerical simulation is not required. The limit for maximum permissible exposure = 0.000922 2 ㎽/㎝ /( 4R Conclusion: The exposure condition of this device is compliant with FCC rul es. S = P = G = R = = ) Copyright ⓒ 2014 , DT&C Co ., Ltd .

FCCID: E2XST-GM6000 DTNC1409-03944 Report No.: DRTFCC1412-1624(1) TRF-RF226(00)140710 Page 2 / 31 Copyright ○ C 2015, DT&C Co., Ltd. Test Report Version Test Report No. Date Description DRTFCC1412-1624 Dec. 17, 2014 Initial issue DRTFCC1412-1624(1) Jan. 13, 2015 Update add model name FCCID: E2XST-GM6000 DTNC1409-03944 Report No.: DRTFCC1412-1624(1) TRF-RF226(00)140710 Page 3 / 31 Copyright ○ C 2015, DT&C Co., Ltd. Table of Contents 1. EUT DESCRIPTION .................................................................... 4 1.1 EUT Information ................................................................................................. 4 2. SUMMARY OF TESTS ................................................................ 5 3. TEST METHODOLOGY .............................................................. 6 3.1 EUT Configuration .............................................................................................. 6 3.2 EUT Exercise ...................................................................................................... 6 3.3 General Test Procedures ................................................................................... 6 3.4 Description of Test Modes ................................................................................ 6 4. INSTRUMENT CALIBRATION .................................................... 7 5. FACILITIES AND ACCREDITATIONS ........................................ 7 5.1 Facilities .............................................................................................................. 7 5.2 Equipment ........................................................................................................... 7 6. ANTENNA REQUIREMENTS ..................................................... 7 7. TEST RESULT ............................................................................ 8 7.1 6dB Bandwidth ................................................................................................... 8 7.2 Maximum Peak Conducted Output Power ..................................................... 11 7.3 Maximum Power Spectral Density. ................................................................. 14 7.4 Out of Band Emissions in non-restricted frequency band ........................... 17 7.5 Out of Band Emissions in restricted frequency band .................................. 24 7.6 AC Power-line Conducted Emissions ............................................................ 28 7.7 Occupied Bandwidth ........................................................................................ 29 8. LIST OF TEST EQUIPMENT ..................................................... 30 APPENDIX I................................................................................... 31 FCCID: E2XST-GM6000 DTNC1409-03944 Report No.: DRTFCC1412-1624(1) TRF-RF226(00)140710 Page 4 / 31 Copyright ○ C 2015, DT&C Co., Ltd. 1. EUT DESCRIPTION 1.1 EUT Information Product ESL Graphic TAG Model Name ST-GM6000 Add Model Name ST-GM6000N Power Supply DC 6V (Not rechargeable battery) Frequency Range 2405 ~ 2480MHz(16 channels) Modulation Type OQPSK(ZIGBEE) Antenna Specification Antenna Type: Internal Antenna Antenna Gain: 1.61 dBi(PK) The difference between model names is declared from applicant. - ST-GM6000 = Zigbee - ST-GM6000N = Zigbee with only RFID TAG FCCID: E2XST-GM6000 DTNC1409-03944 Report No.: DRTFCC1412-1624(1) TRF-RF226(00)140710 Page 5 / 31 Copyright ○ C 2015, DT&C Co., Ltd. 2. SUMMARY OF TESTS FCC Part Section(s) RSS Section(s) Parameter Limit Test Condition Status Note 1 I. Transmitter Mode (TX) 15.247(a) RSS-210 [A8.2] 6 dB Bandwidth > 500 kHz Conducted C 15.247(b) RSS-210 [A8.4] Transmitter Output Power < 1Watt C 15.247(d) RSS-210 [A8.5] Out of Band Emissions / Band Edge 20dBc in any 100kHz BW C 15.247(e) RSS-210 [A8.2] Transmitter Power Spectral Density < 8dBm / 3kHz C - RSS Gen [6.6] Occupied Bandwidth (99%) RSS-Gen(6.6) NA 15.205 15.209 15.247(d) RSS-210 [A8.5] General Field Strength Limits (Restricted Bands and Radiated Emission Limits) < FCC 15.209 limits Radiated C 15.207 RSS-Gen [8.8] AC Conducted Emissions < FCC 15.207 limits AC Line Conducted NA Note2 15.203 - Antenna Requirements FCC 15.203 - C Note 1: C=Comply NC=Not Comply NT=Not Tested NA=Not Applicable Note 2: The power of this device is only DC(Not rechargeable Battery). Note 3: Except radiated measurement, all the test items were performed at TM1. And the radiated measurement were performed at TM1 and TM2. FCCID: E2XST-GM6000 DTNC1409-03944 Report No.: DRTFCC1412-1624(1) TRF-RF226(00)140710 Page 6 / 31 Copyright ○ C 2015, DT&C Co., Ltd. 3. TEST METHODOLOGY Generally the tests were performed according to the KDB558074 v03r02. And ANSI C63.10-2009 was used to reference appropriate EUT setup and maximizing procedures of radiated spurious emission and AC line conducted emission testing. 3.1 EUT Configuration The EUT configuration for testing is installed on RF field strength measurement to meet the Commissions requirement and operating in a manner that intends to maximize its emission characteristics in a continuous normal application. 3.2 EUT Exercise The EUT was operated in the engineering mode to fix the TX frequency that was for the purpose of the measurements. According to its specifications, the EUT must comply with the requirements of the Section 15.207, 15.209 and 15.247 under the FCC Rules Part 15 Subpart C. 3.3 General Test Procedures Conducted Emissions According to the requirements in Section 6.2 of ANSI C63.10, the EUT is placed on the turntable, which is 0.8 m above ground plane and the conducted emissions from the EUT are measured in the frequency range between 0.15 MHz and 30MHz using CISPR Quasi-peak and Average detector. Radiated Emissions The EUT is placed on a turntable, which is 0.8 m above ground plane. The turntable shall rotate360 degrees to determine the position of maximum emission level. EUT is set 3 m away from the receiving antenna, which varied from 1 m to 4 …

Text truncated - open the document above for the full version.

FCC ID: E2XST-GM6000 Copyright Ⓒ 2014, DT&C Co., Ltd. Test Setup photographs EUT Position: X-axis EUT Position: Y-axis EUT Position: Z-axis FCC ID: E2XST-GM6000 Copyright Ⓒ 2014, DT&C Co., Ltd. Test Setup Photo of Radiated Measurement (0.009 ~ 30MHz) FCC ID: E2XST-GM6000 Copyright Ⓒ 2014, DT&C Co., Ltd. Test Setup Photo of Radiated Measurement (below 1000MHz) FCC ID: E2XST-GM6000 Copyright Ⓒ 2014, DT&C Co., Ltd. Test Setup Photo of Radiated Measurement (Above 1GHz)