E2XSWL-2200PWireless LAN PCI Card

360 Herndon Parkway, Suite 1400 Report number 2002057 Herndon, VA 20170 FCC Part 15.247 http://www.rheintech.com Industry Canada RSS-210 FCC ID E2X-SWL2200P M/N SWL-2200P © Rhein Tech Laboratories, Inc Page 51 of 67 Revision: 0 APPENDIX L: MANUAL Please see the following pages. 1 SAMSUNG MagicLAN SWL-2200M/P User Manual (Rev. 1.4) 2 Table of Contents 1. MagicLAN Installation ................................................................................9 1.1 Introduction ........................................................................................9 1.2 Technical Background ..........................................................................9 1.3 MagicLAN Overview............................................................................11 2. Before the Installation ...............................................................................13 2.1 What is in your Package ......................................................................13 2.2 System Requirement ...........................................................................13 2.3 Preparations For Installation..................................................................13 3. MagicLAN Installation for Windows 98/ME/NT4.0/2000/XP/Linux ................14 3.1 Installation Overview ..........................................................................14 3.2 Installation Procedure of Windows 98 ..............................................14 3.3 Installation Procedure of Windows ME ..............................................21 3.4 Installation Procedure of Windows NT4.0 ............................................. 27 3.5 Installation Procedure of Windows 2000 ...........................................36 3.6 Installation Procedure of Windows XP ..............................................42 3.7 Installation Procedure of Linux ...........................................................48 3.8 Update of MagicLAN Wireless LAN Card Driver........................................54 3.9 Removal of MagicLAN Wireless LAN Card Driver.........................54 4. The Program for setting MagicLAN................................................................56 4.1 The concept of Profile.........................................................................56 4.2 Installation Procedure....................................................................56 5. The main configuration of Program.................................................................61 5.1 Profile.............................................................................................63 5.1.1 The ‘New’ button......................................................................63 5.1.2 The ‘Apply’ button....................................................................63 5.1.3 The ‘Edit’ button......................................................................63 5.1.4 The ‘Delete’ button....................................................................66 5.2 Status..............................................................................................66 5.2.1 The ‘Current Status’ button..........................................................67 5.2.2 The ‘AP Status’ button...............................................................67 3 5.2.3 The ‘Site Survey’ button............................................................68 5.2.4 Statistics.................................................................................69 5.3 General Settings...................................................................................69 5.3.1 The ‘DHCP’ button.................................................................69 5.3.2 The ‘Options’ button................................................................70 5.4 Version........................................................................................70 6. Troubleshooting ....................................................................................72 Probable Symptoms and their Diagnosis................................................ 4 Notice 1 This manual cannot be reproduced in any form without the prior written permission of SAMSUNG Electro-Mechanics Co., Ltd. SAMSUNG Electro-Mechanics Co., Ltd. reserves the right to change this manual and the spec ifications to improve products without prior notice. You can get the most recent software and user documentation for all MagicLAN products on our web site. All other brand and product names are trademarks of registered trademarks of their respective holders. http://www.MagicLAN.com Service Dept . Young-sik Lyu ([email protected] ) Tel : +82-31-218-2416 Fax : +82-31-218-2413 Sales America Eun-Sung Cho([email protected]) Tel : +82-31-218-2407 Fax : +82-31-218-2414 Europe Yong-Il Kim ([email protected]) Tel : +82-31-218-2408 Fax : +82-31-218-2414 Asia Seong-Mun Jeong ([email protected] ) Tel : +82-31-218-2412 Fax : +82-31-218-2414 Copyright  1999 - 2002 SAMSUNG Electro-Mechanics Co., Ltd. All rights reserved. This is a generic manual; references to other products are contained herein. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. these limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful inter- ference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equi…

Text truncated - open the document above for the full version.

360 Herndon Parkway, Suite 1400 Report number 2002057 Herndon, VA 20170 FCC Part 15.247 http://www.rheintech.com Industry Canada RSS-210 FCC ID E2X-SWL2200P M/N SWL-2200P © Rhein Tech Laboratories, Inc Page 43 of 67 Revision: 0 APPENDIX E: CONFIDENTIALITY REQUEST LETTER (IF APPLICABLE) Please see the following page. Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Rd. Columbia, MD 21406 USA Subject: FCC ID: E2XSWL-2200P APRIL 18, 2002 Gentlemen, Samsung Electro-Mechanics hereby requests that the following items be kept confidential under sections 0.457 and 0.459 of the CFR. If this information was to be made public record it would adversely affect the core business. I would like to request the following items be confidential: (1) Schematics (2) Block Diagram Sincerely, John K. Seo Senior Manager Network Division, R&D Lab. 2 nd Wireless LAN ELECTRO-MECHANICS 31 4,Maetan 3- Dong, Paldal-ku, Suwoni, Kyung ki- Do,Kor ea,441- 743 T E L 82 -31 -2 10- 57 12 FAX 82- 31 -21 0- 552 9

360 Herndon Parkway, Suite 1400 Report number 2002057 Herndon, VA 20170 FCC Part 15.247 http://www.rheintech.com Industry Canada RSS-210 FCC ID E2X-SWL2200P M/N SWL-2200P © Rhein Tech Laboratories, Inc Page 42 of 67 Revision: 0 APPENDIX D: AGENCY AUTHORIZATION LETTER Please see the following page. September 22, 2000 American Telecommunications Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern: Please be advised that Samsung Electro-Mechanics authorizes Rhein Tech Laboratories, Inc. to act on our behalf, until otherwise notified, for applications submitted to American Telecommunications Certification Body, Inc. (ATCB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse ACT of 1988, U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002(b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you for your attention to this matter.

4_181'" Samsung Electro-Mechanics Co.,Ltd 314, Maetan-3Dong, Paldal-Gu Suwon, Kyunggi-Do ELECTRO-MECHANICS Korea TEL: +82 (0)312105712 FAX: +82 (0)312105529 American TCB Inc. 6731 Whittier Avenue Suite ClIO McLean, VA 22101 Subject: DTS (Digital Transmission System) APRIL 25, 2002 Gentlemen, Please be advised that the manufacturer requests that the above-referenced model be granted as a Digital Transmission System (DTS) in accordance with the FCC Rules and Regulations. Sincerely, JohnK.Seo ~ Senior Manager Network Division R&D Lab. 2nd WLANTeam

American Telecommunications Certification Body Inc. 6731 Whittier Ave, McLean, VA 22101 May 10, 2002 RE: FCC ID: E2XSWL-2200P Attention I have a few comments on this Application. l Page 2May 10, 2002 1 Please note that a technical brochure does not adequately provide an operational description of the device. The preliminary technical brochure that you have listed in the operational description portion of the application seems to be the generic product information that will be in the users manual. Because this information will be in the manual, it cannot be classified as confidential. Please remove the product description from the confidentiality letter and resubmit a new confidentiality letter listing only those portions capable of being held confidential (e.g. schematics and block diagram). Please provide an adequate operational description or theory of operation. xxxx 2 Please note that the technical brochure listed above and the same description of the device in the manual must agree. The product description must agree throughout the application. Please correct the product description in the brochure and manual to agree. xxxx 3 TIA603-1 is for use on a licensed device not an unlicensed device. Please note that the test methods for Part 15 intentional radiators are those in ANSI C63.4. Also, please note that the FCC has issued recommended test procedures for Spread Spectrum devices. These are DA000705 for FHSS and fcc97114 for DSSS. These recommended test procedures should be referenced when testing SS devices not TIA603-1 as listed on page 1 of the report. Please provide proper reference to test methods used. xxxx 4 Your report states that you tested the device in three orthogonal planes (page 7 par 2.1). Yet, it then states that the device was testing in a personal computer. Please explain how three orthogonal planes were tested in a PC. Was the antenna placed in three orthogonal planes, or was the PCI card? xxxx 5 Your report states that you used the FCC’s Band Edge procedures. However, your plots only show step one of that procedure. It does not show the relative delta between peaks in the restricted band compared to the peak of the fundamental. Please note that in step 2 of the procedure, the video bandwidth used is to be greater than the resolution bandwidth. This is because you are not actually averaging the measurements in the restricted band at this point, but only obtaining a relative delta between peak measurements. This relative delta is then used in step 3 to determine what the averaged reading actually is in the restricted band. The final measurement is a comparison of the peak and averaged readings of the fundamental with a reduced RSBW at the band edges to compensate for problems at the band edge in SS devices. Remember that you are not actually making an averaged field strength measurement in this procedure. Instead, you are using the delta between the peak measurements, subtracting this delta from the averaged reading of the fundamental and applying this result to the restricted band edge. The device appears to be compliant even in this unfinished measurement. However, please remember that both steps must be done to complete the procedure in accordance with the FCC. Please explain why you did not perform the correct measurements in accordance with the FCC recommended procedure, or please perform the measurements in accordance with the FCC recommended procedures to include all three steps. xxxx 6 Please note that table 9-2 uses the incorrect power. In table 8-3 you state the power on channel 6 is 16.1dBm yet in table 9-2 you state channel 6 is 15.4dBm. Please correct the report to show actual values measured. Also, please note that you did not provide antenna conducted measurements for channel 11 as stated in the report. Please correct these tables and provide the data for channel 11. xxxx 7 Please provide the required internal and external pictures for this device. xxxx 8 Please note that the label is sufficiently large enough to include the two-condition statement as required by 15.19 and 2.925. Please note that 2.925 requires the FCC ID and “Any other statements or labeling requirements imposed by the rules governing the operation of the specific class of equipment” to be on the equipment. Please provide a label and statement in compliance with these parts of CFR47. xxxx l Page 3May 10, 2002 9 Please note that the statement (or similar) as required in 15.105(b) does not appear to be in the manual. Please note that the statement is intended to warn of possible interference to and from any device, not just medical devices. Please update the manual to include this 15.105 or similar statement. Dennis Ward mailto:[email protected] The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information may result in application termination. Correspondence should be considered part of the permanent submission and may be viewed from the Internet after a Grant of Equipment Authorization is issued. Please do not respond to this correspondence using the email reply button. In order for your response to be processed expeditiously, you must submit your documents through the AmericanTCB.com website. Also, please note that partial responses increase processing time and should not be submitted. Any questions about the content of this correspondence should be directed to the sender.

May 23, 2002 Dennis: Please find our responses below each issue listed. RE: FCC ID: E2XSWL-2200P May 10, 2002 Correspondence 1. Please note that a technical brochure does not adequately provide an operational description of the device. The preliminary technical brochure that you have listed in the operational description portion of the application seems to be the generic product information that will be in the users manual. Because this information will be in the manual, it cannot be classified as confidential. Please remove the product description from the confidentiality letter and resubmit a new confidentiality letter listing only those portions capable of being held confidential (e.g. schematics and block diagram). Please provide an adequate operational description or theory of operation. a) New Operational Description uploaded, along with revised Technical Brochure. b) Revised Confidentiality Letter, without Product Description line item, uploaded. 2. Please note that the technical brochure listed above and the same description of the device in the manual must agree. The product description must agree throughout the application. Please correct the product description in the brochure and manual to agree. Technical brochure (product specifications document) and page 8 in User Manual now contain the same data; uploaded revised specification document and revised manual. 3. TIA603-1 is for use on a licensed device not an unlicensed device. Please note that the test methods for Part 15 intentional radiators are those in ANSI C63.4. Also, please note that the FCC has issued recommended test procedures for Spread Spectrum devices. These are DA000705 for FHSS and fcc97114 for DSSS. These recommended test procedures should be referenced when testing SS devices not TIA603-1 as listed on page 1 of the report. Please provide proper reference to test methods used. Revised Page 1 of Test Report, reflecting appropriate test procedures, and uploaded report again. 4. Your report states that you tested the device in three orthogonal planes (page 7 par 2.1). Yet, it then states that the device was testing in a personal computer. Please explain how three orthogonal planes were tested in a PC. Was the antenna placed in three orthogonal planes, or was the PCI card? The PCI card was installed in a personal computer (tower computer configuration). The PCI WLAN output connector was connected to the antenna via a coaxial cable. The antenna was placed in three orthogonal positions during testing. 5. Your report states that you used the FCC’s Band Edge procedures. However, your plots only show step one of that procedure. It does not show the relative delta between peaks in the restricted band compared to the peak of the fundamental. Please note that in step 2 of the procedure, the video bandwidth used is to be greater than the resolution bandwidth. This is because you are not actually averaging the measurements in the restricted band at this point, but only obtaining a relative delta between peak measurements. This relative delta is then used in step 3 to determine what the averaged reading actually is in the restricted band. The final measurement is a comparison of the peak and averaged readings of the fundamental with a reduced RSBW at the band edges to compensate for problems at the band edge in SS devices. Remember that you are not actually making an averaged field strength measurement in this procedure. Instead, you are using the delta between the peak measurements, subtracting this delta from the averaged reading of the fundamental and applying this result to the restricted band edge. The device appears to be compliant even in this unfinished measurement. However, please remember that both steps must be done to complete the procedure in accordance with the FCC. Please explain why you did not perform the correct measurements in accordance with the FCC recommended procedure, or please perform the measurements in accordance with the FCC recommended procedures to include all three steps. Though the FCC’s preferred method for performing compliance with the Bandedge requires DA000705 and fcc97114 for FHSS and DSSS respectively, ATCB has allowed the use of absolute measurement plots by applying 1 MHz / 100 Hz RBW / VBW on the LBE and UBE’s for low power DSSS devices without amplification and lower gain antennas. RTL will reference the method used for Bandedge Compliance in the future. 6. Please note that table 9-2 uses the incorrect power. In table 8-3 you state the power on channel 6 is 16.1dBm yet in table 9-2 you state channel 6 is 15.4dBm. Please correct the report to show actual values measured. Also, please note that you did not provide antenna conducted measurements for channel 11 as stated in the report. Please correct these tables and provide the data for channel 11. a) Table 9-2 has been corrected, and is included in the uploaded revised report. b) Antenna conducted measurements for channel 11 have been added to the report in Table 9-3, and report was uploaded. 7. Please provide the required internal and external pictures for this device. Internal and External photographs have been uploaded. 8. Please note that the label is sufficiently large enough to include the two-condition statement as required by 15.19 and 2.925. Please note that 2.925 requires the FCC ID and “Any other statements or labeling requirements imposed by the rules governing the operation of the specific class of equipment” to be on the equipment. Please provide a label and statement in compliance with these parts of CFR47. Label has been modified to include statements required by 15.19 and 2.925, and uploaded for review. 9. Please note that the statement (or similar) as required in 15.105(b) does not appear to be in the manual. Please note that the statement is intended to warn of possible interference to and from any device, not just medical devices. Please update the manual to include this 15.105 or similar statement. Manual page 5 …

Text truncated - open the document above for the full version.

360 Herndon Parkway, Suite 1400 Report number 2002057 Herndon, VA 20170 FCC Part 15.247 http://www.rheintech.com Industry Canada RSS-210 FCC ID E2X-SWL2200P M/N SWL-2200P © Rhein Tech Laboratories, Inc Page 54 of 67 Revision: 0 APPENDIX N: ANTENNA PHOTOGRAPHS PHOTOGRAPH 5: FRONT VIEW OF ANTENNA 360 Herndon Parkway, Suite 1400 Report number 2002057 Herndon, VA 20170 FCC Part 15.247 http://www.rheintech.com Industry Canada RSS-210 FCC ID E2X-SWL2200P M/N SWL-2200P © Rhein Tech Laboratories, Inc Page 55 of 67 Revision: 0 PHOTOGRAPH 6: BACK VIEW OF PCB ANTENNA 360 Herndon Parkway, Suite 1400 Report number 2002057 Herndon, VA 20170 FCC Part 15.247 http://www.rheintech.com Industry Canada RSS-210 FCC ID E2X-SWL2200P M/N SWL-2200P © Rhein Tech Laboratories, Inc Page 56 of 67 Revision: 0 PHOTOGRAPH 7: PCB OF PATCH ANTENNA 360 Herndon Parkway, Suite 1400 Report number 2002057 Herndon, VA 20170 FCC Part 15.247 http://www.rheintech.com Industry Canada RSS-210 FCC ID E2X-SWL2200P M/N SWL-2200P © Rhein Tech Laboratories, Inc Page 57 of 67 Revision: 0 PHOTOGRAPH 8: FRONT PCB OF ANTENNA 360 Herndon Parkway, Suite 1400 Report number 2002057 Herndon, VA 20170 FCC Part 15.247 http://www.rheintech.com Industry Canada RSS-210 FCC ID E2X-SWL2200P M/N SWL-2200P © Rhein Tech Laboratories, Inc Page 58 of 67 Revision: 0 PHOTOGRAPH 9: BACK PCB OF ANTENNA

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

360 Herndon Parkway, Suite 1400 Report number 2002057 Herndon, VA 20170 FCC Part 15.247 http://www.rheintech.com Industry Canada RSS-210 FCC ID E2X-SWL2200P M/N SWL-2200P © Rhein Tech Laboratories, Inc Page 46 of 67 Revision: 0 APPENDIX H: LABEL LOCATION PHOTOGRAPH 1: IDENTIFICATION LABEL ON DEVICE 360 Herndon Parkway, Suite 1400 Report number 2002057 Herndon, VA 20170 FCC Part 15.247 http://www.rheintech.com Industry Canada RSS-210 FCC ID E2X-SWL2200P M/N SWL-2200P © Rhein Tech Laboratories, Inc Page 47 of 67 Revision: 0 PHOTOGRAPH 2: IDENTIFICATION LABEL

360 Herndon Parkway, Suite 1400 Report number 2002057 Herndon, VA 20170 FCC Part 15.247 http://www.rheintech.com Industry Canada RSS-210 FCC ID E2X-SWL2200P M/N SWL-2200P © Rhein Tech Laboratories, Inc Page 54 of 67 Revision: 0 APPENDIX N: ANTENNA PHOTOGRAPHS PHOTOGRAPH 5: FRONT VIEW OF ANTENNA 360 Herndon Parkway, Suite 1400 Report number 2002057 Herndon, VA 20170 FCC Part 15.247 http://www.rheintech.com Industry Canada RSS-210 FCC ID E2X-SWL2200P M/N SWL-2200P © Rhein Tech Laboratories, Inc Page 55 of 67 Revision: 0 PHOTOGRAPH 6: BACK VIEW OF PCB ANTENNA 360 Herndon Parkway, Suite 1400 Report number 2002057 Herndon, VA 20170 FCC Part 15.247 http://www.rheintech.com Industry Canada RSS-210 FCC ID E2X-SWL2200P M/N SWL-2200P © Rhein Tech Laboratories, Inc Page 56 of 67 Revision: 0 PHOTOGRAPH 7: PCB OF PATCH ANTENNA 360 Herndon Parkway, Suite 1400 Report number 2002057 Herndon, VA 20170 FCC Part 15.247 http://www.rheintech.com Industry Canada RSS-210 FCC ID E2X-SWL2200P M/N SWL-2200P © Rhein Tech Laboratories, Inc Page 57 of 67 Revision: 0 PHOTOGRAPH 8: FRONT PCB OF ANTENNA 360 Herndon Parkway, Suite 1400 Report number 2002057 Herndon, VA 20170 FCC Part 15.247 http://www.rheintech.com Industry Canada RSS-210 FCC ID E2X-SWL2200P M/N SWL-2200P © Rhein Tech Laboratories, Inc Page 58 of 67 Revision: 0 PHOTOGRAPH 9: BACK PCB OF ANTENNA 360 Herndon Parkway, Suite 1400 Report number 2002057 Herndon, VA 20170 FCC Part 15.247 http://www.rheintech.com Industry Canada RSS-210 FCC ID E2X-SWL2200P M/N SWL-2200P © Rhein Tech Laboratories, Inc Page 59 of 67 Revision: 0 PHOTOGRAPH 10: SWL2200P_PCI CARD WITH 2200M 360 Herndon Parkway, Suite 1400 Report number 2002057 Herndon, VA 20170 FCC Part 15.247 http://www.rheintech.com Industry Canada RSS-210 FCC ID E2X-SWL2200P M/N SWL-2200P © Rhein Tech Laboratories, Inc Page 60 of 67 Revision: 0 PHOTOGRAPH 11: BACK OF SWL2200P 360 Herndon Parkway, Suite 1400 Report number 2002057 Herndon, VA 20170 FCC Part 15.247 http://www.rheintech.com Industry Canada RSS-210 FCC ID E2X-SWL2200P M/N SWL-2200P © Rhein Tech Laboratories, Inc Page 61 of 67 Revision: 0 PHOTOGRAPH 12: FRONT OF PCI CARD WITHOUT MINI PCI WLAN RADIO 360 Herndon Parkway, Suite 1400 Report number 2002057 Herndon, VA 20170 FCC Part 15.247 http://www.rheintech.com Industry Canada RSS-210 FCC ID E2X-SWL2200P M/N SWL-2200P © Rhein Tech Laboratories, Inc Page 62 of 67 Revision: 0 PHOTOGRAPH 13: FRONT VIEW OF 2200M 360 Herndon Parkway, Suite 1400 Report number 2002057 Herndon, VA 20170 FCC Part 15.247 http://www.rheintech.com Industry Canada RSS-210 FCC ID E2X-SWL2200P M/N SWL-2200P © Rhein Tech Laboratories, Inc Page 63 of 67 Revision: 0 PHOTOGRAPH 14: BACK VIEW OF 2200M 360 Herndon Parkway, Suite 1400 Report number 2002057 Herndon, VA 20170 FCC Part 15.247 http://www.rheintech.com Industry Canada RSS-210 FCC ID E2X-SWL2200P M/N SWL-2200P © Rhein Tech Laboratories, Inc Page 64 of 67 Revision: 0 PHOTOGRAPH 15: FRONT VIEW OF 2200M WITHOUT SHIELD

Engineering and Testing for EMC and Safety Compliance 360 Herndon Parkway, Suite 1400 Herndon, VA 20170 Phone: 703-689-0368; Fax: 703-689-2056; Metro: 703-471-6441 CERTIFICATION APPLICATION REPORT FCC PART 15.247 CERTIFICATION & INDUSTRY CANADA CERTIFICATION Test Lab: Rhein Tech Laboratories, Inc. Phone: 703-689-0368 360 Herndon Parkway Fax: 703-689-2056 Suite 1400 Web Site: www.rheintech.com Herndon, VA 20170 Applicant Information: Samsung Electro-Mechanics Co., LTD Contact: Jae-Jung Ko R&D Center 4th floor E-Mail: [email protected] 314, Maetan-3Dong, Paldal-Gu Phone: 82-31-210-6779 or 2280 Paldal-Gu Suwon, Kyunggi-Do 442-743 Fax: 82-31-210-5529 Korea FCC ID: E2XSWL-2200P GRANTEE FRN NUMBER: 0006-9029-36 PLAT FORM: N/A RTL WORK ORDER NUMBER: 2002057 MODEL(S): SWL-2200P RTL QUOTE NUMBER: QRTL02-413DDF DATE OF TEST REPORT: April 15, 2002 American National Standard Institute: ANSI/TIA/EIA603, DA000705 for FHSS and fcc97114 for DSSS FCC Classification: DTS – Digital Transmission System FCC Rule Part(s): Part 15.247: Operation within the bands 920-928 MHz, 2400-2483.5 MHz and 5725-5850 MHz Direct Sequence System Industry Canada Standard: RSS-210: Low Power License-Exempt Radio Communication Devices (All Frequency Bands) Digital Interface Information Digital Interface was found to be compliant Receiver Information Receiver was found to be compliant Frequency Range (MHz) Output Power (W) Freq. Tolerance Emission Designator 2412-2462 0.0457 N/A N/A We, the undersigned, hereby declare that the equipment tested and referenced in this report conforms to the identified standard(s) as described in this test report. No modifications were made to the equipment during testing in order to achieve compliance with these standards. Furthermore, there was no deviation from, additions to, or exclusions from the FCC Part 2, FCC Part 15, Industry Canada RSS-210, ANSI C63.4, ANSI/TIA/EIA603, DA000705 for FHSS and fcc97114 for DSSS. Signature: Date: April 15, 2002 Typed/Printed Name: Desmond A. Fraser Position: President Rhein Tech Laboratories Report number 2002057 360 Herndon Parkway, Suite 1400 FCC Part 15.247 Herndon, VA 20170 Industry Canada RSS-210 FCC ID E2X-SWL2200P http://www.rheintech.com M/N SWL-2200P Revision: 1 Page 2 of 67 TABLE OF CONTENTS 1 GENERAL INFORMATION ...................................................................................................................................5 1.1 SCOPE .........................................................................................................................................................5 1.2 TEST FACILITY............................................................................................................................................5 1.3 RELATED SUBMITTAL(S)/GRANT(S) .........................................................................................................5 2 TEST INFORMATION............................................................................................................................................6 2.1 TEST JUSTIFICATION.................................................................................................................................6 2.2 EXERCISING THE EUT ...............................................................................................................................6 2.3 TEST RESULT SUMMARY ..........................................................................................................................6 2.4 TEST SYSTEM DETAILS.............................................................................................................................7 2.5 CONFIGURATION OF TESTED SYSTEM...................................................................................................8 3 COMPLIANCE WITH THE RESTRICTED BAND EDGE - §15.205 ......................................................................9 3.1 TEST PROCEDURE.....................................................................................................................................9 3.2 COMPLIANCE WITH THE RESTRICTED BAND EDGE TEST DATA .........................................................9 4 CONDUCTED LIMITS - §15.207 .........................................................................................................................14 4.1 TEST METHODOLOGY FOR CONDUCTED EMISSIONS MEASUREMENTS .........................................14 4.2 CONDUCTED EMISSION TEST ................................................................................................................14 4.3 CONDUCTED EMISSION TEST DATA......................................................................................................15 5 RADIATED EMISSION LIMITS RECEIVER/DIGITAL INT…

Text truncated - open the document above for the full version.