E2XWNI20NC0302SNC-i20 Model WNI20NC0302

For OEM integration only – device cannot be sold to general public. Therefore we will not supply the User’s manual, the installation manual is the official for OEM. FCC ID: E2XWNI20NC0302 We will ask OEM to include the following Notices required by FCC on the product and in the User’s manual. “Contains Transmitter Module FCC ID: E2XWNI20NC03012” or “Contains FCC ID: E2XWNI20NC0302” Notice Please describe the following warning on the final product which contains this module. Contains Transmitter Module FCC ID: E2XWNI20NC0302 or Contains FCC ID: E2XWNI20NC0302 Please describe the following warning to the manual. When installing it in a mobile equipment Note) Portable equipment: Equipment for which the spaces between human body and antenna are used within 20cm. Mobile equipment: Equipment used at position in which the spaces between human body and antenna exceeded 20cm.

Date: February 08, 2013 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 c.c. UL Compliance Certification Services Certification Division 47173 Benicia Street Fremont, CA 94538, USA To whom it may concern: I, the undersigned, hereby authorize Ms. Misoh Kim/Application Examiner of UL-Korea, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Ms. Misoh Kim of UL- Korea on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL Korea as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely, Type Name: Jinhwan Lim Title: Principal Engineer E-mail: [email protected] Company name: Samsung Electro-Mechanics REMARK: 1. This authorization letter will be sent along with your application when filing with the Certification Division. 2. Please follow the format and type it on company letterhead and send original to us. 3. Authorized signature must be in agreement with grantee code contact in FCC database.

February 8, 2013 FCC ID : E2XWNI20NC0302 Model : WNI20NC0302 Applicant : Samsung Electro-Mechanics Co., Ltd. Request for Modular Transmitter Approval This NFC Module (Model: WNI20NC0302) is designed by Samsung Electro-Mechanics Co., Ltd. This modular transmitter complies with the modular transmitters basic requirements (Item 1 to 8) in FCC Part 15 Subpart C Section 15.212 as indicated below: [Modular transmitters basic requirements] (1) Have its own RF shielding: This modular transmitter has its own RF shielding. Please refer to the external photo. (2) H ave buffered modulation/data inputs: Data input to this modular transmitter is controlled as not generating excessive data speed and abnormal modulation. (3) Have its own power supply regulation: This modular transmitter has own power supply regulator. Please refer to the block diagram / schematics. (4) Comply with the antenna and transmission system requirements of § 15.203, 15.204(b) and 15.204(c): Antenna is permanently attached to the modular transmitter by solder. This module has a unique antenna coupler, W.FL. This modular transmitter will always be used in the configuration in which it was authorized. (5) Tested in a stand-alone configuration: The modular transmitter has been performed the testing as a stand alone and then confirmed the compliance. Unless the transmitter module will be battery powered, it must comply with the AC line conducted requirements found in FCC § 15.207. AC or DC power lines and data input/output lines connected to the module must not contain ferrites, unless they will be marketed with the module. The length of these lines shall be the length typical of actual use or, if that length is unknown, at least 10 centimeters to insure that there is no coupling between the case of the module and supporting equipment. Any accessories, peripherals, or support equipment connected to the module during testing shall be unmodified and commercially available: This modular transmitter complies with AC line conducted requirements. AC/DC power lines and data input/output lines does not contain ferrites, and the lengths of these lines are typical of actual use. All peripherals used during the testing are unmodified and commercially available. Please refer to the test report. (6) Equipped with either a permanently affixed label or must be capable of electronically displaying its FCC ID: FCC ID is shown on the label and permanently affixed to this modular transmitter. Please refer to cover letter. If the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module: If the FCC ID is not visible, FCC ID will also be displayed on the host device. Please refer to the user manual. (7) Comply with any specific rules or operating requirements that ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements: The necessary explanation to be complied with this requirement is contained in the manual. Please refer to the user manual. (8) Comply with any applicable RF exposure requirements in its final configuration: The modular transmitter complies with FCC radiation exposure requirement. Please refer to the RF Exposure statement in the user manual. If this modular transmitter will equipped in the portable equipment, we conduct SAR testing and additional application as appropriate. For mobile use, this modular transmitter can be equipped on any device if the distance between the radiator and person’s body keep at least 20cm or more. Name: Jinhwan Lim Title: Principal Engineer E-mail: [email protected] Company name: Samsung Electro-Mechanics

CONFIDENTIALITY REQUEST Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 February 5, 2013 TO WHOM IT MAY CONCERN Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, Samsung Electro Mechanics. requests confidentiality for the following products: FCC ID Number Product Title/Model E2XWNI20NC0302 SNC-i20 (NFC Module) / WNI20NC0302 The following exhibits contain trade secrets and proprietary information that could be of benefit to our competitors regarding the design of our product. This material is not customarily available to the general public and we request that it be withheld from public inspection. We request that the following information submitted be held permanent confidential treatment. Permanent Confidential Request - Schematics - Block diagram - Operational Description - Part List Short- term Confidential Request - Internal photo - External photo - User’s manual - Set up photo If you have any questions, please feel free to contact me at the address shown below. Best regards, Type Name: Jinhwan Lim Title: Principal Engineer E -mail: [email protected] Company name: Samsung Electro-Mechanics

Project Number: 13CA02038 File Number MC17075 Page : 1 of 3 Model Number: WNI20NC0302 UL Korea, Ltd. 33 rd FL, Gangnam Finance Center, 737 Yeoksam-dong, Gangnam-gu, Seoul 135-984 Korea Tel: +82.2.2009.9000, Fax:+82.2.2009.9405 Report Version 1.2 June- 06,2007 Only those products bearing the UL Mark should be considered as being covered by UL. EXTERNAL PHOTOS OF EUT Whole Project Number: 13CA02038 File Number MC17075 Page : 2 of 3 Model Number: WNI20NC0302 UL Korea, Ltd. 33 rd FL, Gangnam Finance Center, 737 Yeoksam-dong, Gangnam-gu, Seoul 135-984 Korea Tel: +82.2.2009.9000, Fax:+82.2.2009.9405 Report Version 1.2 June- 06,2007 Only those products bearing the UL Mark should be considered as being covered by UL. Antenna Front Project Number: 13CA02038 File Number MC17075 Page : 3 of 3 Model Number: WNI20NC0302 UL Korea, Ltd. 33 rd FL, Gangnam Finance Center, 737 Yeoksam-dong, Gangnam-gu, Seoul 135-984 Korea Tel: +82.2.2009.9000, Fax:+82.2.2009.9405 Report Version 1.2 June- 06,2007 Only those products bearing the UL Mark should be considered as being covered by UL. Antenna Rear

FCC ID Position FCC ID: E2XWNI20NC0302 NFC Module Model: WNI20NC0302 JAPAN: FCC ID: E2XWNI20NC0302 IC: 3269B- WNI20NC0302 KCC-CRM-B8E- WNI20NC0302 CCAJ13LP0310T5 CMIIT ID: XXXXYZNNNN Indonesia: SAMSUNG Electro-Mechanics Co., Ltd.

Project Number: 13CA02038 File Number MC17075 Page : 1 of 2 Model Number: WNI20NC0302 UL Korea, Ltd. 33 rd FL, Gangnam Finance Center, 737 Yeoksam-dong, Gangnam-gu, Seoul 135-984 Korea Tel: +82.2.2009.9000, Fax:+82.2.2009.9405 Report Version 1.2 June- 06,2007 Only those products bearing the UL Mark should be considered as being covered by UL. INTERNAL PHOTOS OF EUT Module - Top Project Number: 13CA02038 File Number MC17075 Page : 2 of 2 Model Number: WNI20NC0302 UL Korea, Ltd. 33 rd FL, Gangnam Finance Center, 737 Yeoksam-dong, Gangnam-gu, Seoul 135-984 Korea Tel: +82.2.2009.9000, Fax:+82.2.2009.9405 Report Version 1.2 June- 06,2007 Only those products bearing the UL Mark should be considered as being covered by UL. Module - Bottom

UL Korea, Ltd An organization dedicated 33 rd FL, Gangnam Finance Center, 737 to public safety and committed to Yeoksam-dong, Gangnam-gu, Seoul quality service for over 100 years 135-984 Korea Tel: +82.2.2009.9000, Fax:+82.2.2009.9405 Underwriters Laboratories Inc. www.ul.com/emc www.ulk.co.kr Project No.: 13CA02038 File No.: MC17075 Report No.: 13CA02038-1-FCC Date: January 31, 2013 Model No.: WNI20NC0302 FCC ID.: E2XWNI20NC0302 IC ID.: 3269B-WNI20NC0302 FCC Test Report in accordance with FCC Part 15 Subpart C Section 15.215 & 15.225 for NFC Module Samsung Electro-Mechanics Co., Ltd. 150, Maeyoung-ro (Maetan-dong), Yeongtong-gu, Suwon-si, Gyeonggi-do, 442-743, KOREA Copyright  2005 Underwriters Laboratories Inc. Underwriters Laboratories Inc. authorizes the above-named company to reproduce this Report provided it is reproduced in its entirety. Only those products bearing the UL Mark should be considered as being covered by UL. Project Number: 13CA02038 File Number : MC17075 Page : 2 of 34 Model Number: WNI20NC0302 UL Korea, Ltd. 33 rd FL, Gangnam Finance Center, 737 Yeoksam-dong, Gangnam-gu, Seoul 135-984 Korea Tel: +82.2.2009.9000, Fax:+82.2.2009.9405 Report Version 1.2 June-06,2007 Only those products bearing the UL Mark should be considered as being covered by UL. Summary of Test Results: The following tests were performed on a sample submitted for evaluation of compliance with FCC Part 15 Subpart C Section 15.215 & 15.225 and RSS-210 & RSS-Gen No Reference Clause No. FCC Part15 Subpart C Conformance Requirements Verdict Remark 1 15.215(c) RSS-210 A8.2(a) 20 dB Bandwidth & 99 % Bandwidth Complied 2 15.225(a),(b),(c) RSS-210 A2.6 The field strength of any emission within the band 13.110-14.010 MHz Complied 3 15.225(d) RSS-210 A2.6 The field strength of any emission appearing outside of the 13.110-14.010 MHz band Complied 4 15.225(e) RSS-210 A2.6 The frequency tolerance of the carrier signal Complied 5 15.209(a) RSS-Gen 7.2.5 Transmitter radiated spurious emissions Complied 6 15.109(a) RSS-Gen 6.1 Receiver radiated spurious emissions Complied 7 15.207(a) RSS-Gen 7.2.4 Transmitter AC power line conducted emission Complied 8 15.107(a) RSS-Gen 7.2.4 Receiver AC power line conducted emission Complied Conclusion: The tests listed in the Summary of Testing section of this report have been performed and the results recorded by UL Korea Ltd. in accordance with the procedures stated in each test requirement and specification. The test list was determined by the Applicant as being applicable to the Equipment Under Test. As a result, the subject product has been verified to comply or not comply as noted in the Summary of Testing with each test specification. The test results relate only to the items tested. Tested by Kyung Duk Ko, WiSE Project Engineer Reviewed by Jeawoon, Choi, WiSE Engineering Leader UL Verification Services- 3014ASEO UL Verification Services- 3014ASEO UL Korea Ltd. UL Korea Ltd. January 31, 2013 January 31, 2013 Project Number: 13CA02038 File Number : MC17075 Page : 3 of 34 Model Number: WNI20NC0302 UL Korea, Ltd. 33 rd FL, Gangnam Finance Center, 737 Yeoksam-dong, Gangnam-gu, Seoul 135-984 Korea Tel: +82.2.2009.9000, Fax:+82.2.2009.9405 Report Version 1.2 June-06,2007 Only those products bearing the UL Mark should be considered as being covered by UL. Test Report Details Witnessed By: UL Korea Ltd. 33 rd FL. GFC Center, 737 Yeoksam-dong, Gangnam-gu, Seoul, 135-984, Korea Test Site: EMC Compliance Ltd. 480-5 Sin-dong, Yeongtong-gu, Suwon-city, Gyeonggi-do, 443-390, Korea The test facility was deemed to have the environment and capabilities necessary to perform the tests included in the test package. Applicant: Samsung Electro-Mechanics Co., Ltd. 150, Maeyoung-ro (Maetan-dong), Yeongtong-gu, Suwon-si, Gyeonggi-do, 442- 743, KOREA Applicant Contact: Myunglim Ryu Title: Senior Engineer Phone: 82-31-210-5047 E-mail: [email protected] Product Type: NFC Module Model Number: WNI20NC0302 Trademark SAMSUNG Sample Serial Number: N/A Test standards: FCC Part 15 Subpart C Section 15.215 Additional provisions to the general radiated emission limitations FCC Part 15 Subpart C Section 15.225 Operation within the band 13.110–14.010 MHz. RSS-Gen Issue 3 General Requirements and Information for the Certification of Radio Apparatus RSS-210 Issue 8 Licence-exempt Radio Apparatus (All Frequency Bands): Category I Equipment Sample Receive Date: December 05, 2012 Testing Start Date: January 24, 2013 Date Testing Complete: January 31, 2013 Overall Results: Pass UL Korea Ltd. reports apply only to the specific test samples and test results submitted for UL’s review. All samples tested were in good operating condition throughout the entire test program. It is the manufacturer's responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical components. UL Korea Ltd. shall have no liability for any deductions, inferences or generalizations drawn by the client or others from UL Korea Ltd. issued reports. This report shall not be used to claim, constitute or imply product certification, approval, or any agency of the National Authorities. This report may contain test results that are not covered by the NVLAP or KOLAS accreditation. Project Number: 13CA02038 File Number : MC17075 Page : 4 of 34 Model Number: WNI20NC0302 UL Korea, Ltd. 33 rd FL, Gangnam Finance Center, 737 Yeoksam-dong, Gangnam-gu, Seoul 135-984 Korea Tel: +82.2.2009.9000, Fax:+82.2.2009.9405 Report Version 1.2 June-06,2007 Only those products bearing the UL Mark should be considered as being covered by UL. Report Directory 1. GENERAL PRODUCT INFORMATION ........................................................ 5 1.1. EQUIPMENT DESCRIPTION .......................................................................................................... 5 1.2. DETAILS OF TEST EQUIPMENT (EUT) ......................................................................................... 5…

Text truncated - open the document above for the full version.

Project Number: 13CA02038 File Number : MC17075 Page : 1 of 2 Model Number: WNI20NC0302 UL Korea, Ltd. 33 rd FL, Gangnam Finance Center, 737 Yeoksam-dong, Gangnam-gu, Seoul 135-984 Korea Tel: +82.2.2009.9000, Fax:+82.2.2009.9405 Report Version 1.2 June- 06,2007 Only those products bearing the UL Mark should be considered as being covered by UL. Figure 1. Photo of Radiated Emission Test Setup Project Number: 13CA02038 File Number : MC17075 Page : 2 of 2 Model Number: WNI20NC0302 UL Korea, Ltd. 33 rd FL, Gangnam Finance Center, 737 Yeoksam-dong, Gangnam-gu, Seoul 135-984 Korea Tel: +82.2.2009.9000, Fax:+82.2.2009.9405 Report Version 1.2 June- 06,2007 Only those products bearing the UL Mark should be considered as being covered by UL. Figure 2. Photo of Conducted Emission Test Setup