EOA-24TVEStarlink Edge TV

Your StarLink Edge TV Streamer User Manual Accessory for: Wireless hearing aids P00006052 TOC | 32 Congrats on your new TV Streamer! Your TV Streamer is designed to stream audio from various electronic audio sources — like televisions, computers, MP3 players, DVD players, and cable boxes — directly to your wireless hearing aids. It can simultaneously stream audio to an unlimited number of users, allowing them to share the same listening experience. Use this simple manual to get started. Table of contents 1. Get to know your TV Streamer Meet your TV Streamer 4 Set up your TV Streamer 6 Use your TV Streamer 10 3. Troubleshooting guide 12 4. Additional guidance Intended use 15 FCC information 17 Regulatory information 18 Get to know your TV Streamer | 54 | Get to know your TV Streamer Meet your TV Streamer Overview 1. Power button Turns the TV Streamer OFF/ON. 2. Pair button To pair your hearing aids. 3. Indicator light Provides operational status of the TV Streamer. 4. Power supply jack (USB-C) For the power adapter. 5. Optical TOSLINK jack For the Optical TOSLINK cable. 6. Analog jack For the 3.5mm-to-RCA cable. 2 1 4 Back of TV Streamer 3 5 6 Get to know your TV Streamer | 76 | Get to know your TV Streamer Set up your TV Streamer Power ON/OFF Use the power button to turn your TV Streamer ON or OFF: • ON – press the power button. Release when the indicator light glows white. • OFF – press the power button. Release when the indicator light no longer appears. To pair with hearing aids Before using your TV Streamer for the first time, you’ll need to pair it with your hearing aid(s). This allows your accessory to recognize your hearing aids so they can work together. STEP 1: Turn ON your TV Streamer STEP 2: Turn your hearing aids OFF and ON. • For CROS hearing aid systems: Turn OFF your hearing aids and CROS transmitter. Next, turn ON your hearing aids but leave the CROS transmitter OFF. STEP 3: Pair your TV Streamer with your hearing aid(s): 1. Ensure your hearing aids are not connected to nearby Bluetooth ® devices: • Turn OFF Bluetooth on your mobile phone. • Turn OFF any wireless accessories already paired to your hearing aids. 2. Place your hearing aids within 6 inches (15 cm) of your TV Streamer. 3. Press the Pair button on the TV Streamer. The indicator light will begin to blink blue. • NOTE: Audio streaming will be temporarily stopped during this step. 4. Blue light will be constant when paired. To connect your TV Streamer to an electronic audio source There are several ways to attach an audio source to your TV Streamer. Carefully look at your electronic audio source (e.g., a television, computer, MP3 player, DVD player, or cable box) to determine which AUDIO OUT options it has. Insert cable into the AUDIO OUT jack on your electronic audio source Attach the other end of cable to the rear of the TV Streamer Optical TOSLINK Audio Out Use jack B B C Analog RCA-to- 3.5mm Note: Connect the red to red and the white to white. Use jack C B C Get to know your TV Streamer | 98 | Get to know your TV Streamer 1. Remove the plastic caps from both ends of the optical TOSLINK cable. 2. Attach the optical TOSLINK cable into the audio OUT jack on your electronic audio source. Power ON your electronic audio source. • NOTE: If there is no TOSLINK audio OUT jack on your electronic audio source, try a different electronic audio source or try the 3.5mm-to-RCA cable. 3. Attach the other end of the optical TOSLINK cable into the optical TOSLINK jack on the back of the TV Streamer. 4. Plug the power adapter into the wall. 5. Insert the power adapter into the power supply jack on the back of the TV Streamer. B C 6. The indicator light on your TV Streamer will glow blue for a successful setup. It has detected audio and is now streaming. • NOTE: If the indicator light remains solid white, repeat 1–6 or see Troubleshooting guide on p. 12. Typical setup TV Streamer Television Audio Out Done! Head to the next page to start using your TV Streamer. Get to know your TV Streamer | 1110 | Get to know your TV Streamer Use your TV Streamer STEP 1: Check that your hearing aids are ON. Before streaming audio for the first time, ensure your hearing aids are paired to your TV Streamer. See p. 6. STEP 2: Audio will stream automatically. Or do one of the following: • Hearing aid mobile app: Open the app on your mobile phone or tablet. Select the option to start/stop streaming from Accessories screen. • Wireless Remote: If configured by your hearing care professional, press the Favorite button. • Hearing aid user control: If configured by your hearing care professional, a specific gesture (e.g., a long press or a double tap on a user control) can start/stop streaming. Reminder – Audio streaming will also stop when an incoming audio signal is not detected or if the TV Streamer is turned off. Indicator light The indicator light identifies how your TV Streamer is currently operating: Indicator light statusOperational status Solid whiteON and not streaming audio Solid blueON and streaming audio No indicator light appearsOFF Blinking blueHearing aid pairing mode Solid redMalfunction or electrical issue Troubleshooting guide | 1312 | Troubleshooting guide Troubleshooting guide Problems with your TV Streamer? Try these tips. If issues continue, contact your hearing care professional. Symptom Possible causes Solutions One (or both) hearing aids unexpectedly drops out of audio streaming. Hearing aids may be on the edge of wireless range. Move closer to the TV Streamer. Battery level in hearing aid can no longer support audio streaming. Replace hearing aid battery with new one. The TV Streamer may not be positioned for optimal streaming. Re-orient the TV Streamer spatially by turning a few degrees to right or left. Large object, such as furniture or a wall, may be degrading signal. For best performance, your hearing aids should be within line-of-sight of the TV Streamer. Symptom Possible causes Solutions Indicator light is solid blue, but…

Text truncated - open the document above for the full version.

Starkey | 6700 Washington Avenue S Eden Prairie, Minnesota 55344 T: 1.800.328.8602 Hear better. Live better. Starkey.com March 30, 2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 Re: section 2.911(d)(7) filing To whom it may concern, This letter is to confirm that Starkey Laboratories, Inc. has accepted responsibility to act as the agent for service of process as acknowledged by the applicant, Starkey Laboratories, Inc. William J. Mitchell confirms he is not associated with or part of any TCB or test lab. U.S. Agent: William J. Mitchell Title: Principal Wireless and Safety Regulatory Engineer Company Name: Starkey Laboratories, Inc. Address: | 6600 Washington Avenue, South, Eden Prairie, MN 55344 Telephone No: | 952-918-5683 Email: | [email protected] FRN (FCC Registration | 0015964463 Number): The applicant accepts and acknowledges the obligation to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Signature of Applicant (must be signed by the contact of record in the FCC database for the applicant grantee code): luc J Duthil | Feb Signature of U.S. Agent (if different from applicant): Dp bet! Name: William J. Mitchell Name: Date: March 30, 2023 Date: Starkey logo and Hear better. Live better. are registered trademarks of Starkey Laboratories, Inc.

Sta rkey "6700 Washington Avenue § Eden Prairie, Minnesota 55344 T: 1.800.328.8602 Hear better. Live better. Starkey.com 18 July 2024 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 Re: Attestation regarding 8covered’ equipment and the Covered List FCC ID: EOA-24TVE To whom it may concern, Per 2.911(d)(5)(i), Starkey Laboratories, Inc. certifies that the equipment for which authorization is sought is not <covered= equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Per 2.911(d)(5) (ii), Starkey Laboratories, Inc. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing <covered= equipment. sincerely, A yy ff Lpa-)\ pbb William J. Mitchell, PE Principal Wireless and Safety Regulatory Engineer 952-918-5683 [email protected] Starkey logo and Hear better. Live better. are registered trademarks of Starkey Laboratories, Inc.

Sta rkey 6700 Washington Avenue S Eden Prairie, Minnesota 55344 T: 1.800.328.8602 H e a r b e tt e r . L i v e b e tt e r . S t a r k e y c o m 18 July 2024 Federal Communications Commission 45 L Street, NE Washington, DC 20554 Attention: Application Examiner Reference: Certification: | Part 15.247 Intentional Radiator Applicant: Starkey Laboratories, Inc. Equipment: Low Power Device (2400-2483.5 MHz) Model #: Starlink Edge TV FCC ID: EOA-24TVE Dear Sir/Madam: Enclosed please find an FCC EOA-24TVE certification application. This device is a media streaming device for our 2.4 GHz wireless hearing aids that uses the Bluetooth Low Energy protocol. Should you have any questions, please feel free to contact the undersigned. Sincerely, William J. Mitehell, PE Principal Wireless and Safety Regulatory Engineer 952-918-5683 [email protected] Starkey logo and Hear better. Live better. are registered trademarks of Starkey Laboratories, Inc.

Sta rkey 6700 Washington Avenue S Eden Prairie, Minnesota 55344 T: 1.800.328.8602 H e a r b e tt e r . L i v e b e tt e r . S t a r k e y . c o m 18 July 2024 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 Re: Request for confidentiality Applicant: Starkey Laboratories, Inc. FCC ID: EOA-24TVE To whom it may concern: Permanent Confidentiality Request is hereby submitted by Starkey Laboratories, Inc. to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential: e Schematics e Detailed Block diagrams e Detailed Operational/Functional Description Rationale for request for confidentiality: Starkey Laboratories, Inc. has invested considerable time and materials in research and development to produce the referenced product. Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us. Disclosure of the short-term confidential portions of this application during the period of importation and/or distribution would reveal key aspects of proprietary technology to competitors and diminish the value of our investment in research and development. Sincerely, Q i . p i d b l } William J. Mitchell, PE Principal Wireless and Safety Regulatory Engineer 952-918-5683 [email protected] Starkey logo and Hear better. Live better. are registered trademarks of Starkey Laboratories, Inc.

Starlink Edge TV Model 810 External Photos (scale in cm) Top bottom (includes label – sample label shown for location) Back Front Left Side Right Side

Starlink Edge TV Model 810 Internal Photos PCB Top Side PC Board Antenna Bluetooth Radio PC Board Bottom Side PC Board in bottom of case

This report must not be used to claim product certification, approval, or endorsement by A2LA, NIST, or any agency of the U.S. Government. This Report shall not be reproduced, except in full without written approval of the laboratory. Starkey Laboratories, Inc. Edge Bluetooth TV Streaming Device FCC 1.1307:2024 Bluetooth Low Energy Report: STAK0347.5, Issue Date: August 13, 2024 TABLE OF CONTENTS 2023.04.17 Section Page Number Certificate of Evaluation .................................................................................. 3 Revision History .............................................................................................. 4 Accreditations .................................................................................................. 5 Facilities .......................................................................................................... 6 Product Description ......................................................................................... 7 Exposure Condition ......................................................................................... 8 Exemption from RF Exposure Evaluation ....................................................... 9 End of Report .................................................................................................. 12 Report No. STAK0347.52/12 CERTIFICATE OF EVALUATION 2018-09-14 Product compliance is the responsibility of the client; therefore, the tests and equipment modes of operation represented in this report were agreed upon by the client, prior to testing. The results of this test pertain only to the sample(s) tested. The specific description is noted in each of the individual sections of the test report supporting this certificate of test. This report reflects only those tests from the referenced standards shown in the certificate of test. It does not include inspection or verification of labels, identification, marking or user information. As indicated in the Statement of Work sent with the quotation, Element’s standard process is to always use the latest published version of the test methods even when earlier versions are cited in the test specification. Issuance of a purchase order was de facto acceptance of this approach. Otherwise, the client would have advised Element in writing of the specific version of the test methods they wanted applied to the subject testing Last Date of Evaluation: August 13, 2024 Starkey Laboratories, Inc. EUT: Edge Bluetooth TV Streaming Device RF Exposure Evaluation Standards Specification Method FCC 1.1307:2024 FCC 1.1307:2024 Results Method Clause Description Applied Results Comments (b)(3)(i)(B) Exemption From RF Exposure Evaluation Yes Pass None Deviations From Evaluation Standards None Approved By: Donald Facteau, Process Architect Report No. STAK0347.53/12 REVISION HISTORY 2018.07.17 Revision Number Description Date (yyyy-mm-dd) Page Number 00 None Report No. STAK0347.54/12 ACCREDITATIONS AND AUTHORIZATIONS 2021.09.01 United States FCC - Designated by the FCC as a Telecommunications Certification Body (TCB). Certification chambers, Open Area Test Sites, and conducted measurement facilities are listed with the FCC. A2LA - Each laboratory is accredited by A2LA to ISO / IEC 17025, and as a product certifier to ISO / IEC 17065 which allows Element to certify transmitters to FCC and IC specifications. Canada ISED - Recognized by Innovation, Science and Economic Development Canada as a Certification Body (CB) and as a CAB for the acceptance of test data. European Union European Commission – Recognized as an EU Notified Body validated for the EMCD and RED Directives. United Kingdom BEIS – Recognized by the UK as an Approved Body under the UK Radio Equipment and UK EMC Regulations. Australia/New Zealand ACMA - Recognized by ACMA as a CAB for the acceptance of test data. Korea MSIT / RRA - Recognized by KCC’s RRA as a CAB for the acceptance of test data. Japan VCCI - Associate Member of the VCCI. Conducted and radiated measurement facilities are registered. Taiwan BSMI – Recognized by BSMI as a CAB for the acceptance of test data. NCC - Recognized by NCC as a CAB for the acceptance of test data. Singapore IDA – Recognized by IDA as a CAB for the acceptance of test data. Israel MOC – Recognized by MOC as a CAB for the acceptance of test data. Hong Kong OFCA – Recognized by OFCA as a CAB for the acceptance of test data. Vietnam MIC – Recognized by MIC as a CAB for the acceptance of test data. SCOPE For details on the Scopes of our Accreditations, please visit: California Minnesota Oregon Texas Washington Report No. STAK0347.55/12 FACILITIES 2024.07.18 Testing was performed at the following location(s) Location Labs (1) Address A2LA (2) ISED (3) BSMI (4) VCCI (5) CAB (6) FDA (7) ☐ California OC01-17 41 Tesla Irvine, CA 92618 (949) 861-8918 3310.04 2834B SL2-IN-E-1154R A-0029 US0158 TL-55 ☐ Minnesota MN01-11 9349 W Broadway Ave. Brooklyn Park, MN 55445 (612) 638-5136 3310.05 2834E SL2-IN-E-1152R A-0109 US0175 TL-57 ☐ Oregon EV01-12 6775 NE Evergreen Pkwy #400 Hillsboro, OR 97124 (503) 844-4066 3310.02 2834D SL2-IN-E-1017 A-0108 US0017 TL-56 ☐ Plano Texas PT01-15 1701 E Plano Pkwy, Ste 150 Plano, TX 75074 (972) 509-2566 214.19 32637 SL2-IN-E-057R N/A US0054 N/A ☐ Texas TX01-09 3801 E Plano Pkwy Plano, TX 75074 (469) 304-5255 3310.03 2834G SL2-IN-E-1158R N/A US0191 TL-54 ☐ Washington NC01-05 19201 120th Ave NE Bothell, WA 98011 (425) 984-6600 3310.06 2834F SL2-IN-E-1153R A-0110 US0157 TL-67 ☐ Offsite N/A See Product Description N/A N/A N/A N/A N/A N/A See data sheets for specific labs (1) The lab designations denote individual rooms within each location. (OC01, OC02, OC03, etc.) (2) A2LA Certificate No. (3) ISED Company No. (4) BSMI No. (5) VCCI Site Filing No. (6) CAB Identifier. Recognized Phase I CAB for ISED, ACMA, BSMI, IDA, KCC/RRA, MIC, MOC, NCC, OFCA (7) FDA ASCA No. Report No. STAK0347.56/12 PRODUCT DESCRIPTION 2018-07-17 Client and Equipment Under Evaluation …

Text truncated - open the document above for the full version.

THISDRAWINGSANDSPECIFICATIONSARETHEPROPERTYOFSUNITEC ENTERPRISECO.,LTD.ANDSHALLNOTBEREPRODUCEDORUSEDAS THEBASISFORTHEMANUFACTUREORSALEOFAPPARATUSOR DEVICESWITHOUTPERMISSION 1 ANTENNASPECIFICATION Client： AvantronicsLimited. Project： TC518 Version： V1.0 Manufacturer orSupplier SunitecEnterpriseCo.,LTD. AddressBuildingCNo.725,WeiXiangTaiIndustrial zone,FuChengstreet,LongHuadistrict, ShenZhen,GuangDong,China IssuedDate： 5-Jul-24 TestedbyMolite ApprovedbyHuangzhishun THISDRAWINGSANDSPECIFICATIONSARETHEPROPERTYOFSUNITEC ENTERPRISECO.,LTD.ANDSHALLNOTBEREPRODUCEDORUSEDAS THEBASISFORTHEMANUFACTUREORSALEOFAPPARATUSOR DEVICESWITHOUTPERMISSION 1 1 Contents 1.RevisionHistory 2.Introduction 3.ElectricalCharacteristics THISDRAWINGSANDSPECIFICATIONSARETHEPROPERTYOFSUNITEC ENTERPRISECO.,LTD.ANDSHALLNOTBEREPRODUCEDORUSEDAS THEBASISFORTHEMANUFACTUREORSALEOFAPPARATUSOR DEVICESWITHOUTPERMISSION 2 2 1.RevisionHistory Rev.NoIssuedDateDescriptionSummary V1.05-Jul-24initialrelease 2.Introduction 2.1IntroductionofProduct Thisproductisanantennaprintedonacircuitboard 2.2SpecificationandDimension 3.ElectricalCharacteristics 3.1Testequipment: VECTORNETWORKANALYZER AgilentE5071C AntennaMeasurementSystem ETS-LindgrenAntennaMeasurementSystem Unit:mm THISDRAWINGSANDSPECIFICATIONSARETHEPROPERTYOFSUNITEC ENTERPRISECO.,LTD.ANDSHALLNOTBEREPRODUCEDORUSEDAS THEBASISFORTHEMANUFACTUREORSALEOFAPPARATUSOR DEVICESWITHOUTPERMISSION 3 3 3.2AntennaS11parameters 3.3AntennaTestSettings: THISDRAWINGSANDSPECIFICATIONSARETHEPROPERTYOFSUNITEC ENTERPRISECO.,LTD.ANDSHALLNOTBEREPRODUCEDORUSEDAS THEBASISFORTHEMANUFACTUREORSALEOFAPPARATUSOR DEVICESWITHOUTPERMISSION 4 4 3.42/3DRadiationPattern: 3.5AntennaData: Freq(MHz)Efficiency(dB)Efficiency(%)Gain(dB) 2402-1.7766.462.40 2441-1.6268.732.26 2480-1.9264.242.19 2415-1.6468.432.71 3.6ElectricalCharacteristics: AntennatypeFPCAntenna WorkingFrequencyRange2450+/-50MHz Impedance50Ω MaxEfficiency(%)68.43%@2415MHz MaxpeakGain(dBi)2.71dBi@2415MHz

This report must not be used to claim product certification, approval, or endorsement by A2LA or any agency of the U.S. Government. This Report shall not be reproduced, except in full without written approval of the laboratory. Starkey Laboratories, Inc. Edge Bluetooth TV Streaming Device FCC 15.247:2024 RSS-247 Issue 3:2023 RSS-Gen Issue 5:2018+A1:2019+A2:2021 Bluetooth radio Report: STAK0347.1 Rev. 0, Issue Date: August 8, 2024 TABLE OF CONTENTS 2023.04.17 Section Page Number Certificate of Test ............................................................................................ 3 Revision History .............................................................................................. 4 Accreditations .................................................................................................. 5 Facilities .......................................................................................................... 6 Measurement Uncertainty ............................................................................... 7 Test Setup Block Diagrams ............................................................................. 8 Product Description ......................................................................................... 11 Power Settings and Antenna Information ........................................................ 12 Configurations ................................................................................................. 13 Modifications ................................................................................................... 14 Powerline Conducted Emissions ..................................................................... 15 Duty Cycle ....................................................................................................... 28 DTS Bandwidth (6 dB) .................................................................................... 29 Occupied Bandwidth (99%) ............................................................................. 32 Output Power .................................................................................................. 35 Equivalent Isotropic Radiated Power .............................................................. 38 Power Spectral Density ................................................................................... 40 Band Edge Compliance .................................................................................. 43 Spurious Conducted Emissions ...................................................................... 46 Spurious Radiated Emissions ......................................................................... 51 End of Report .................................................................................................. 60 Report No. STAK0347.12/60 CERTIFICATE OF TEST 2022.04.01 Product compliance is the responsibility of the client; therefore, the tests and equipment modes of operation represented in this report were agreed upon by the client, prior to testing. The results of this test pertain only to the sample(s) tested. The specific description is noted in each of the individual sections of the test report supporting this certificate of test. This report reflects only those tests from the referenced standards shown in the certificate of test. It does not include inspection or verification of labels, identification, marking or user information. As indicated in the Statement of Work sent with the quotation, Element’s standard process is to always use the latest published version of the test methods even when earlier versions are cited in the test specification. Issuance of a purchase order was de facto acceptance of this approach. Otherwise, the client would have advised Element in writing of the specific version of the test methods they wanted applied to the subject testing. Last Date of Test: July 11, 2024 Starkey Laboratories, Inc. EUT: Edge Bluetooth TV Streaming Device Radio Equipment Testing Standards Specification Method FCC 15.247:2024 ANSI C63.10:2013 RSS-247 Issue 3:2023 RSS-Gen Issue 5:2018+A1:2019+A2:2021 Guidance FCC KDB 558074 v05r02:2019 Notice 2021 - CEB0001 Results Test Description Result FCC Section(s) RSS Section(s) ANSI C63.10 Section(s) Comments Powerline Conducted Emissions Pass 15.207 RSS-Gen 8.8 6.2 Duty Cycle N/A KDB 558074 -6.0 RSS-Gen 3.2 11.6 DTS Bandwidth (6 dB) Pass 15.247(a)(2), KDB 558074 -8.2 RSS-247 5.2(a) 11.8.2 Occupied Bandwidth (99%) N/A KDB 558074 -2.1 RSS-Gen 6.7 6.9.3 Output Power Pass 15.247(b)(3), KDB 558074 -8.3.1 RSS-247 5.4(d, f), RSS-Gen 6.12 11.9.1.1 Equivalent Isotropic Radiated Power Pass 15.247(b)(3), KDB 558074 -8.3.1 RSS-247 5.4(d, f), RSS-Gen 6.12 11.9.1.1 Power Spectral Density Pass 15.247(e), KDB 558074 -8.4 RSS-247 5.2(b) 11.10.2 Band Edge Compliance Pass 15.247(d), KDB 558074 -8.5 RSS-247 5.5 11.11 Spurious Conducted Emissions Pass 15.247(d), KDB 558074 -8.5 RSS-247 5.5 11.11 Spurious Radiated Emissions Pass 15.247(d), KDB 558074 - 8.6, 8.7 RSS-247 5.5, RSS- Gen 6.13, 8.10 11.12.1, 11.13.2, 6.5, 6.6 Deviations From Test Standards None Approved By: Trevor Buls, Principal EMC Test Engineer Signed for and on behalf of Element Report No. STAK0347.13/60 REVISION HISTORY 2018.07.17 Revision Number Description Date (yyyy-mm-dd) Page Number 00 None Report No. STAK0347.14/60 ACCREDITATIONS AND AUTHORIZATIONS 2021.09.01 United States FCC - Designated by the FCC as a Telecommunications Certification Body (TCB). Certification chambers, Open Area Test Sites, and conducted measurement facilities are listed with the FCC. A2LA - Each laboratory is accredited by A2LA to ISO / IEC 17025, and as a product certifier to ISO / IEC 17065 which allows Element to certify transmitters to FCC and IC specifications. Canada ISED - Recognized by Innovation, Science and Economic Development Canada as a Certification Body (CB) and as a CAB for the acceptance of test data. European Union European Commission – Recognized as an EU Notifi…

Text truncated - open the document above for the full version.

TEST SETUP PHOTOS TbtTx 2024.05.24.1 WTD.2024.01.16.0 SPURIOUS RADIATED EMISSIONS WTD.2024.01.16.0 EmiR5 2023.08.29.0 PSA-ESCI 2023.12.23.0 Report No. STAK0347.1 Photos Only2/5 SPURIOUS RADIATED EMISSIONS WTD.2024.01.16.0 EmiR5 2023.08.29.0 PSA-ESCI 2023.12.23.0 Report No. STAK0347.1 Photos Only3/5 SPURIOUS RADIATED EMISSIONS WTD.2024.01.16.0 EmiR5 2023.08.29.0 PSA-ESCI 2023.12.23.0 Report No. STAK0347.1 Photos Only4/5 POWERLINE CONDUCTED EMISSIONS WTD.2024.01.16.0 EmiR5 2023.08.29.0 PSA-ESCI 2023.12.23.0 Report No. STAK0347.1 Photos Only5/5