EVOCT170117" LCD Monitor

TABLE OF CONTENTS ADJUSTING YOUR LCD MONITOR -------------- 2 • General safety precautions ..................................... 2 • Unpacking your monitor ....................................... 5 • Viewing angle ................................................... 6 • Connecting your monitor ................................. 7 • User controls ...................................................... 8 • OSD Functions and adjustments ................................. 9 • Menu adjustments ................................................ 10 • Refining the picture ............................................. 12 APPENDIX ----------------------------------- - 13 • Power management function ................................... 13 • Video input terminal ........................................... 13 • Display modes ................................................. 14 • Troubleshooting ................................................ 15 • Specifications ................................................... 17 Adjusting your lcd monitor 2 General safety precautions This Monitor has been engineered and manufactured to assure your safety. Please read this manual and comply with the warnings and the procedures to avoid any serious electrical shock and other serious damage. 1. 2. 3. 4. Do not place anything heavy, wet or magnetic on the monitor or power cord. Do not cover the ventilation openings nor touch them with metallic or flammable material. High temperature can cause troubles. Avoid operating the monitor in extreme heat, humidity or dusty areas. Extreme temperature may cause discoloration or damages. Ambient Temperature : 0C ~ 40C Do not use a solvent, such as benzene, to clean the monitor to prevent any damages to the LCD surface. Do not use fine tools such as a pin or a pencil near the monitor to prevent any scratch to the LCD surface. Adjusting your lcd monitor 3 5. 6. 7. 8. Place the monitor on a flat surface to prevent it from falling. Do not apply any mechanical shocks to the machine. Install it in a well-ventilated area or secure enough space for ventilation. Turn the monitor off before connecting it to the power outlet. Adjusting your lcd monitor 4 CAUTION : RISK OF ELECTRIC SHOCK, DO NOT OPEN 9. 10. 11. Make sure that the power cord and the other cords are properly connected. Overloaded AC outlets and extension cords are dangerous. Also, the frayed power cords and the broken plugs may cause electric shock or fire. Do not open the monitor. There are no user-serviceable components inside. There is a risk of exposure to high- voltage electricity inside, even when power is turned off. If the display monitor does not operate properly, unplug the power cord and contact your dealer. Handling the electrical equipment carelessly will cause a serious electrical shock and other hazards. Adjusting your lcd monitor 5 Unpacking your monitor Please make sure the following items are included with your monitor. If you find that any of these items are missing or appear damaged, contact your dealer immediately. The power cord can be different depending upon different voltage areas. Adjusting your lcd monitor 6 Viewing angle Your monitor was designed to allow you to adjust it to a comfortable viewing angle. The viewing angle can be adjusted 2? to 90? forward and backward respectively as indicated by the arrow marks below. ? ? Caution Basically when the monitor is in used, please make sure that the monitor is at the safe angle less then 45 degrees. Adjusting your lcd monitor 7 Connecting your monitor Be sure to turn the computer off before connecting the monitor ? Connect the power adaptor cord to the monitor and then to the power supply. ? After powering on the computer, adjust the display using the various controls provided. For further information on the installation procedure, please refer to the operating guide of the computer being used. Adjusting your lcd monitor 8 User controls Front control buttons AUTO MENU SELECT DOWN UP LED POWER No. Key name Description 1 AUTO Activates the auto adjustment function. 2 MENU Opens the OSD menu. 3 SELECT Selects the main menu items and sub-menu items. 4 Moves to the lower menu item or sub-menu item. Decreases the value of the parameter. 5 Moves to the upper menu item or sub-menu item. Increases the value of the parameter. 6 LED Indicates the status of the monitor. • Green : Normal operation. • Blinking : Power saving mode or disconnected signal cable. 7 POWER Turns on/off the monitor. Adjusting your lcd monitor 9 OSD Functions and adjustments Main menu and control selection Press the MENU key to access the main menu. Place the color box on the control icon you wish to adjust by pressing using the or key. Press the SELECT key to access the control. Exit menu Press the MENU key to exit the OSD screen. Auto exit The OSD menu will disappear automatically after a few second of inactivity. Auto save The monitor automatically saves the new values when OSD closes. Normal mode When the video signal is working in normal display mode, power LED is lit green. DPMS mode The LED indicates different status when this unit operates in different power-saving modes. Out of Range When an unsuitable signal is detected, the OSD displays an Out of Range message. Adjusting your lcd monitor 10 Menu adjustments Icon Settings and sub-menus Description BRIGHTNESS • IMAGE BRIGHTNESS CONTROL CONTRAST • IMAGE CONTRAST CONTROL AUTO-ADJUST • AUTOMATICALLY IMAGE SHARPNESS CONTROL AND NOISE ELIMINATION. POSITION • H&V POSITION, CLOCK & PHASE CONTROL. H-Position • IMAGE H-POSITION CONTROL V-Position • IMAGE V-POSITION CONTROL Phase • IMAGE WIDTH CONTROL Clock • IMAGE SHARPNESS CONTROL AND NOISE ELIMINATION Adjusting your lcd monitor 11 Icon Settings and sub-menus Description COLOR • WHITE BALANCE CONTROL Preset Color 1 • ONE OF FACTORY SET OF WHITE BALANCE Preset Color 2 • ONE OF FACTORY SET OF WHITE BALANCE User Color • USER CAN CHANGE THE WHITE LEVEL LANGUAGE • LANGUAGE SELECTION OSD ADJUST • OSD WIN…

Text truncated - open the document above for the full version.

REPORT NO : HCT-F03-1101 FCC ID : EVOCT1701 DATE :NOVEMBER 11,2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr ATTACHMENT C. - BLOCK DIAGRAM REPORT NO : HCT-F03-1101 FCC ID : EVOCT1701 DATE :NOVEMBER 11,2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr

FCC ID : EVOCT1701 HYUNDAI C–TECH NOVEMBER 11, 2003 Federal Communications Commission Equipment Approval Services 7435 Oakland Mills Road Columbia, MD 21046 SUBJECT : KOREA DATA SYSTEMS CO., LTD. FCC ID: EVOCT1701 FCC Part 15 Subpart B Certification Gentlemen: Transmitted herewith, on behalf of KOREA DATA SYSTEMS CO., LTD. is an application for a FCC Part 15 Subpart B Certification of the following 17-inch LCD Monitor: FCC ID : EVOCT1701 Model : CT1701 Attached is the applicant’s Cover Letter, External/Internal Photos, Test Set-Up Photos, FCC ID & Label Location, User Manual, Block Diagram and Test Report. Should you have any questions or comments concerning the above, please contact the undersigned. KI SOO KIM EMC MAMAGER cc: Mr. SOO MIN KIM ------- QUALITY ASSURANCE / MANAGER FCC ID : EVOCT1701 HYUNDAI C–TECH • Solution for EMI We, KOREA DATA SYSTEMS CO., LTD. , announce that all modifications will be incorporated into each unit sold in the U.S. 1. Apply a ferrite Core to the Main Board 2. Attach a gasket on the LCD panel (Please refer to next page of the photographs for Solution for EMI) KOREA DATA SYSTEMS CO., LTD. 2003.11.11 QUALITY ASSURANCE / MANAGER SOO MIN KIM FCC ID : EVOCT1701 HYUNDAI C–TECH 1. Apply a ferrite Core to the Main Board 2. Attach a gasket on the LCD panel

REPORT NO : HCT-F03-1101 FCC ID : EVOCT1701 DATE :NOVEMBER 11,2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 AT TA CH MEN T B. - EXTERNAL PHOTOS REPORT NO : HCT-F03-1101 FCC ID : EVOCT1701 DATE :NOVEMBER 11,2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F03-1101 FCC ID : EVOCT1701 DATE :NOVEMBER 11,2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F03-1101 FCC ID : EVOCT1701 DATE :NOVEMBER 11,2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F03-1101 FCC ID : EVOCT1701 DATE :NOVEMBER 11,2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F03-1101 FCC ID : EVOCT1701 DATE :NOVEMBER 11,2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F03-1101 FCC ID : EVOCT1701 DATE :NOVEMBER 11,2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F03-1101 FCC ID : EVOCT1701 DATE :NOVEMBER 11,2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F03-1101 FCC ID : EVOCT1701 DATE :NOVEMBER 11,2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F03-1101 FCC ID : EVOCT1701 DATE :NOVEMBER 11,2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525

REPORT NO : HCT-F03-1101 FCC ID : EVOCT1701 DATE :NOVEMBER 11,2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr ATTACHMENT A. - ID LABEL INFORMATION AND LOCATION PHOTOS REPORT NO : HCT-F03-1101 FCC ID : EVOCT1701 DATE :NOVEMBER 11,2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr 1.1 ID Label Information Following is a copy of the label that will be placed on the rear side of the cabinet. Figure 3.1 PRODUCT LABEL Both the FCC ID and compliance statement are included in the product label REPORT NO : HCT-F03-1101 FCC ID : EVOCT1701 DATE :NOVEMBER 11,2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr 1.2 Label Location Photos The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase.(Labeling requirements per 2.925)

REPORT NO : HCT-F03-1101 FCC ID : EVOCT1701 DATE :NOVEMBER 11,2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 ATTACHMENT F. - INTERNAL PHOTOS REPORT NO : HCT-F03-1101 FCC ID : EVOCT1701 DATE :NOVEMBER 11,2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F03-1101 FCC ID : EVOCT1701 DATE :NOVEMBER 11,2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F03-1101 FCC ID : EVOCT1701 DATE :NOVEMBER 11,2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F03-1101 FCC ID : EVOCT1701 DATE :NOVEMBER 11,2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F03-1101 FCC ID : EVOCT1701 DATE :NOVEMBER 11,2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F03-1101 FCC ID : EVOCT1701 DATE :NOVEMBER 11,2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F03-1101 FCC ID : EVOCT1701 DATE :NOVEMBER 11,2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F03-1101 FCC ID : EVOCT1701 DATE :NOVEMBER 11,2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F03-1101 FCC ID : EVOCT1701 DATE :NOVEMBER 11,2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F03-1101 FCC ID : EVOCT1701 DATE :NOVEMBER 11,2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F03-1101 FCC ID : EVOCT1701 DATE :NOVEMBER 11,2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F03-1101 FCC ID : EVOCT1701 DATE :NOVEMBER 11,2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F03-1101 FCC ID : EVOCT1701 DATE :NOVEMBER 11,2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F03-1101 FCC ID : EVOCT1701 DATE :NOVEMBER 11,2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F03-1101 FCC ID : EVOCT1701 DATE :NOVEMBER 11,2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F03-1101 FCC ID : EVOCT1701 DATE :NOVEMBER 11,2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F03-1101 FCC ID : EVOCT1701 DATE :NOVEMBER 11,2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F03-1101 FCC ID : EVOCT1701 DATE :NOVEMBER 11,2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F03-1101 FCC ID : EVOCT1701 DATE :NOVEMBER 11,2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F03-1101 FCC ID : EVOCT1701 DATE :NOVEMBER 11,2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F03-1101 FCC ID : EVOCT1701 DATE :NOVEMBER 11,2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F03-1101 FCC ID : EVOCT1701 DATE :NOVEMBER 11,2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F03-1101 FCC ID : EVOCT1701 DATE :NOVEMBER 11,2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F03-1101 FCC ID : EVOCT1701 DATE :NOVEMBER 11,2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 REPORT NO : HCT-F03-1101 FCC ID : EVOCT1701…

Text truncated - open the document above for the full version.

HYUNDAI CALIBRATION & CERTIFICATION TECH. CO., LTD. Product Compliance Division, EMC Team SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI, KYOUNKI-DO, 467-701, KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 CERTIFICATION Rule Part(s): Equipment Class: Standard(s): EUT Type: Max. Resolution(s): Model(s): Port/Connector(s) LCD PANEL This equipment has been shown to be in compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in ANSI C63.4-1992 (Grant Notes: #19, #28). I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. Report prepared by : Ki-Soo Kim Manager of EMC Tech. Part  HYUNDAI CALIBRATION & CERTIFICATION TECH. CO., LTD.  1/ 19 EVOCT1701 CT1701 Manufacture; KOREA DATA SYSTEMS CO.,LTD. 170 Gongdan-Dong, Gumi-Si, Gyungbuk, 730-030, Korea KOREA DATA SYSTEMS FRN : 0005-8974-34 Date of Issue : NOVEMBER 11, 2003 Test Report No.: HCT-F03-1101 Test Site: HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. HCT FRN : 0005-8664-21 FCC ID : MODEL / TYPE : Part 15 & 2; ET Docket 95-19 FCC Class B Peripheral Device (JBP) FCC Class B: 1998 (CISPR 22) 17” LCD Monitor 1280x1024(@80.0KHz/ 75Hz) CT1701 VGA 15-pin D-sub, DC power-in BOEhydis Technology (HM17E11-A00) FCC ID : EVOCT1701 REPORT NO. : HCT-F03- 1101 HYUNDAI C–TECH 2/19 TABLE OF CONTENTS PAGE REPORT COVER 1 TABLE OF CONTENTS 2 1.1 SCOPE 3 2.1 INTRODUCTION (SITE DESCRIPTION) 4 3.1 PRODUCTION INFORMATION 5 4.1 DESCRIPTION OF TESTS (CONDUCTED) 6 4.3 DESCRIPTION OF TESTS (RADIATED) 7 5.1 LIST OF SUPPORT EQUIPMENT 8-9 6.1 TEST DATA (CONDUCTED) 10-14 7.1 TEST DATA (RADIATED) 15 8.1 SMPLE CALCULATIONS 16 9.1 TEST EQUIPMENT 17 10.1 TEST SOFTWARE USED 18 11.1 CONCLUSION 19 ATTACHMENT A: FCC ID LABEL & LOCATION ATTACHMENT B: EXTERNAL PHOTOGRAPHS ATTACHMENT C: BLOCK DIAGRAM(S) ATTACHMENT D: TEST SETUP PHOTOGRAPHS ATTACHMENT E: USER’S MANUAL ATTACHMENT F-1: INTERNAL PHOTOGRAPHS ATTACHMENT F-2: INTERNAL PHOTOGRAPHS ATTACHMENT G: CIRCUIT FCC ID : EVOCT1701 REPORT NO. : HCT-F03- 1101 HYUNDAI C–TECH 3/19 MEASUREMENT REPORT 1.1 Scope Measurement and determination of electromagnetic emissions (EME) of radio frequency devices including intentional and/or unintentional radiators for compliance with the technical rules and regulations of the Federal Communications Commission. • FCC ID : EVOCT1701 • Equipment Class: FCC Class B Peripheral Device (JBP) • EUT Type: LCD MONITOR • Model(s): CT1701 • Max. Resolution: 1280x1024(@80.0KHz/ 75Hz) • Frequency Range: V-Sync: 56Hz – 75Hz , H-Sync: 31KHz – 61KHz • Cable(s): Shielded D-Sub (with ferrite on both ends) • Power Cord: Unshielded • Rule Part(s): FCC Part 15 Subpart B • Test Procedure(s): ANSI C63.4 (1992) • Dates of Tests: March 17,2003~March 21,2003 • Place of Tests: 254-1,MAEKOK-RI,HOBUP-MYUN,ICHON-SI,KYOUNGKI-DO,467-701,KOREA Applicant Name: Address: KOREA DATA SYSTEMS CO., LTD. 170 Gongdan-Dong, Gumi-Si, Gyungbuk, Korea FCC ID : EVOCT1701 REPORT NO. : HCT-F03- 1101 HYUNDAI C–TECH 4/19 2.1 INTRODUCTION The measurement procedure described in American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9kHz to 40GHz (ANSIC63.4-1992) was used in determining radiated and conducted emissions emanating from KOREA DATA SYSTEMS CO., LTD LCD Monitor FCC ID: EVOCT1701 The open area test site and conducted measurement facility used to collect the radiateddata are located at the 254-1, MAEKOK-RI,HOBUP-MYUN,ICHON-SI,KYOUNGKI-DO, 467-701,KOREA. The site is constructed in conformance with the requirements of ANSI C63.4and CISPR Publication 22. Detailed description of test facility was submitted to the Commissionand accepted dated July 23,2003 (Confirmation Number: EA90661) FCC ID : EVOCT1701 REPORT NO. : HCT-F03- 1101 HYUNDAI C–TECH 5/19 3.1 PRODUCT INFORMATION 3.2 Equipment Description Equipment Under Test (EUT) is the KOREA DATA SYSTEMS CO.,LTD. ( Model : CT1701 ) LCD Monitor FCC ID: EVOCT1701 Maximum Resolution(s): 1280 X 1024 (@80.0KHz/ 75Hz) Pixel Pitch: 0.088mm(H) x RGB x 0.264mm(V) Power Supply: AC 100-240V, 12V, 5A Max DC Output, 50/ 60Hz Power Cord: Unshielded AC power cord Port(s)/Input Connector(s): VGA 15-pin D-sub , DC Power-in Brightness : 250 cd/m 2 Dimensions (WxHxD): 414.6x369.0x170.5mm Weight (Net):4.9Kg EMI Suppression Devices: Modifications were made to the device. FCC ID : EVOCT1701 REPORT NO. : HCT-F03- 1101 HYUNDAI C–TECH 6/19 4.1 Description of Tests(Conducted) 4.2 Powerline Conducted RFI (150kHz- 30MHz) The power line conducted RFI measurements were performed according to CISPR 22. The EUT was placed on a non-conducting 1.0 by 1.5 meter table which is 0.8 meters in height and 0.40 meters away from the vertical wall of the shielded enclosure. Power to the EUT is provided through a Rohde & Schwarz 50 Ω / 50 uH Line Impedance Stabilization Network (LISN) and the support equipment through a separate Solar 50 Ω / 50 uH Line- Conducted Test Facility LISN. Sufficient time for the EUT, support equipment, and test equipment were allowed in order for them to warm up to their normal operating condition. The RF output of the LISN was connected to the spectrum analyzer to determine the frequency producing the maximum EME. The spectrum was scanned from 150kHz to 30 MHz. Each maximum EME was remeasured using an EMI receiver. The detector function of the receiver was set to CISPR quasi- peak and average mode with the bandwidth set to 9 kHz. Each emission was maximized consistent with the typical applications by varying the configuration of the test sample. Interface cables were connected to the available interface ports of the test unit. The effect of varying the pos…

Text truncated - open the document above for the full version.

REPORT NO : HCT-F03-1101 FCC ID : EVOCT1701 DATE :NOVEMBER 11,2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr ATTACHMENT D. - TEST SETUP PHOTOS REPORT NO : HCT-F03-1101 FCC ID : EVOCT1701 DATE :NOVEMBER 11,2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr 1.CONDUCTED AND RADIATED MEASUREMENT PHOTOS [CONDUCTED MEASUREMENT PHOTO] REPORT NO : HCT-F03-1101 FCC ID : EVOCT1701 DATE :NOVEMBER 11,2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr [RADIATED MEASUREMENT PHOTO] REPORT NO : HCT-F03-1101 FCC ID : EVOCT1701 DATE :NOVEMBER 11,2003 HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD. SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr