FHO-E2435TOFSMYGGA plug

Internal IKEA of Sweden AB U.S. Agent Designation for Service of Process ATTENTION: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA REGARDING: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name: Go Global Compliance, Inc. Contact Name: Peter Merguerian Street Address: 4454 Crabapple Ct. City/Province/Zip: Tracy, CA 95377 Telephone No: (408) 931-3303 Email: [email protected] FRN #: 0033672916 This letter is to confirm that we (“the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature: Date: Signed by (Printed Name/Title): Peter Merguerian, President & CEO *This letter must be dated within 1-year (update if other terms apply) of the date the application is submitted to the TCB for device certification The Applicant confirms its explicit consent and acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: IKEA of Sweden AB FRN: 0021625967 FCC ID: FHO-E2435 Contact Name: Ivan Susak Street Address: Box 702, SE-343 81, City/Province/Zip: Älmhult, Sweden Telephone No: +4647681000 Email: [email protected] Applicant Signature: Date: Signed by (Printed Name/Title): Ivan Susak / RA engineering manager Docusign Envelope ID: C06C65B1-7D0D-4E61-89DD-0B8895210AB9 2026-01-16 2026-01-20

Internal IKEA of Sweden AB Attestation Statements Not Covered Entity Applicant To: Federal Communications Commission Date: 2026.01.16 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(ii) filing FCC ID: FHO-E2435 IKEA of Sweden AB (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely yours, Applicant Signature Printed Name: Ivan Susak Title: RA engineering manager Address: Box 702 SE-343 81, Almhult, Sweden Tel.: +4647681000 Email: [email protected] Docusign Envelope ID: D1D9A317-381F-4FFE-8178-920B8ECB3E4E

Confidential IKEA of Sweden AB Attestation Statements Not Covered Equipment To: Federal Communications Commission Date: 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i) filing FCC ID: FHO-E2435 IKEA of Sweden AB (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section § 2.903 of the FCC rules. Sincerely yours, Applicant Signature Printed Name: Ivan Susak Title: RA engineering manager Address: Box 702, SE-343 81 Älmhult, Sweden Tel.: +46-766190914 Email: [email protected] Docusign Envelope ID: 6CB56803-19D8-4501-AE65-D6E95D2D42BD 13-03-2026

IKEA of Sweden AB Page 1 of 1 Authority to Act as Agent Date: 2025.6.6 TUV Rheinland of North America, Inc. 1279 Quarry Lane., Suite. A Pleasanton, CA 94566 To Whom It May Concern: I appoint Hongfei Wu of TÜV Rheinland (Shanghai) Co., Ltd. to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the FCC or Industry Canada’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by TUV Rheinland Group, still resides with IKEA of Sweden AB (address: Box 702 SE-343 81, Almhult, Sweden). For TCB applications, We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Date: 2025.6.6 Agreement is valid for 12 months from the above date. By: __________________________ Ivan Susak (Signature) (Print name) RA engineering manager +4647681000 (Title) (Telephone) On behalf of: IKEA of Sweden AB (Company Name) Docusign Envelope ID: AB362850-3D90-4907-9E28-9C0F1D53D48E

IKEA of Sweden AB MS-0044715 Page 1 of 1 Revision 1 Internal Date: 2026.01.16 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road, Columbia, MD 21046, USA Subject: Confidentiality Request for FCC ID: FHO-E2435 Pursuant to FCC 47 CRF 0.457(d), the applicant requests that a part of the subject FCC/IC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term n/a External Photo Short Term Permanent Internal Photos *** Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Schematics Short Term Permanent Test Setup*** Short Term Permanent Tune-Up Procedure Short Term Permanent User’s Manual*** Short Term Permanent Part List/ Antenna Construction IKEA of Sweden AB has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. (*** Exceptional case for Permanent Confidentiality for these Exhibits by PAG only) Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TUV Rheinland in the event information regarding the product or the product is made available to the public. TUV Rheinland will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Sincerely, By: __________________ RA engineering manager __ ___________ Ivan Susak _________________ (Signature/Title) (Print name) Tel: +4647681000 Email: [email protected] Docusign Envelope ID: 6D8A2CB9-4DCF-45D5-BABC-2DEDE35CAB00

12mm 4.875mm 2025.11.3 chenyiwei NA outdoor IP65 when lids closed 5.5mm 5.5mm Remark: The font is Noto IKEA Latin. TYPE: E2435-NA TOFSMYGGA FCC ID: FHO-E2435 IC: 10912A-E2435 CAN ICES(B)/NMB(B) 15A 120V~ 50/60Hz 12.5mm 17.5mm 9mm 9mm 15T This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Resistive: max.1800W 15A Motor: max.300W IKEA of Sweden AB SE-343 81 Älmhult IKEA.com Made in China YYWW 50050 Fabriqué en Chine

www.leedarson.com ▏ Better Life with Better IoT Innovation Rev. 1.0 Antenna Report Antenna picture Antenna Type PCB Loop Antenna Antenna Peak Gain 0.75 dBi Operating Band 2400 MHz ~ 2483.5 MHz Test laboratory name and Address IoT Antenna Test Laboratory, 3 / A,LEEDARSON LIGHTING CO., LTD. Xingtai Industrial Park, Changtai Economic Development Zone, Zhangzhou, 363900, China Antenna Manufacturer LEEDARSON LIGHTING CO., LTD. Xingtai Industrial Park, Changtai Economic Development Zone, Zhangzhou, 363900, China Model name US outdoor plug DUT photo Test Date 2024.12.30 Test Conductor Xiuweisong ANT Antenna Information www.leedarson.com ▏Better Life with Better IoT Innovation 1 OTA measurement Test System The SY-16 OTA system and RayZone2800 OTA system are anechoic chambers, which can measures antenna passive data such as antenna efficiency, antenna gain, and 2D&3D pattern. The systems are shown as follow: Figure 1 SY-16 OTA system Figure 2 RayZone2800 OTA system Antenna Information www.leedarson.com ▏Better Life with Better IoT Innovation 2 Equipment List Table 1 Equipment List Used Equipment Manufacturer Model No. Serial No. Last Cal. Due Date ☒ Network Analyzer Keysight E5071C MY46527808 2025/1/9 2026/1/8 ☐ Network Analyzer Keysight E5071C MY46108051 2024/4/19 2025/4/18 ☒ Anechoic Chamber Sunyield SY-16 SI1727 2024/4/28 2025/4/27 ☐ Anechoic Chamber General Test System RayZone2800 CT10121244 B5079 2024/5/10 2025/5/9 Test Method Table 2 Test Method Name Antenna Performance Parameter Radiation Efficiency Test Method IEEE Standard Test Procedures for Antennas Standard No. ANSI/IEEE Std 149-2021 Test Software PMS-V2.8.5 ☒ MaxSign-V1.4.3 ☐ Test Result Efficiency and Gain Table 3 Antenna Efficiency and Gain Frequency (MHz) Gain (dBi) Efficiency (dB) Efficiency (%) 2400 0.00 -3.70 42.67 2410 0.23 -3.44 45.29 2420 0.20 -3.50 44.65 2430 0.21 -3.54 44.25 2440 0.57 -3.24 47.42 2450 0.63 -3.30 46.74 2460 0.51 -3.54 44.29 2470 0.54 -3.60 43.60 2480 0.75 -3.46 45.05 2490 0.65 -3.61 43.55 2500 0.42 -3.87 41.02 Antenna Information www.leedarson.com ▏Better Life with Better IoT Innovation 3 Radiation Pattern Table 4 Product coordinates Product Coordinates Table 5 3D radiation pattern 3D Radiation Pattern at 2450MHz Antenna Information www.leedarson.com ▏ Better Life with Better IoT Innovation 4 Table 6 Radiation pattern in XY Plane 2D Radiation Pattern ( θ = 90°, XY Plane) Table 7 Radiation pattern in XZ Plane 2D Radiation Pattern ( φ = 0°, XZ Plane) Antenna Information www.leedarson.com ▏ Better Life with Better IoT Innovation 5 Table 8 Radiation pattern in YZ Plane 2D Radiation Pattern ( φ = 90°, YZ Plane)

Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: Test report no.: CN25Z40K 003 Auftrags-Nr.: Order no.: 168557264 Seite 1 von 13 Page 1 of 13 Kunden-Referenz-Nr.: Client reference no.: N/A Auftragsdatum: Order date: 2025-06-03 Auftraggeber: Client: IKEA of Sweden AB Box 702, SE-343 81 Älmhult, Sweden Prüfgegenstand: Test item: TOFSMYGGA plug Bezeichnung / Typ-Nr.: Identification / Type no.: E2435-NA (Trademark: IKEA) Auftrags-Inhalt: Order content: Test Report Prüfgrundlage: Test specification: CFR Title 47 FCC Part 15, Subpart B ICES-003 Issue 7 October 2020 Wareneingangsdatum: Date of sample receipt: 2025-06-03 Prüfmuster-Nr.: Test sample no: A004009545-007~008 Prüfzeitraum: Testing period: 2025-06-14 - 2025-06-17 Ort der Prüfung: Place of testing: TÜV Rheinland (Shenzhen) Co., Ltd. Prüflaboratorium: Testing laboratory: TÜV Rheinland (Shenzhen) Co., Ltd. Prüfergebnis*: Test result*: Pass geprüft von: tested by: X genehmigt von: authorized by: X Datum: Date: 2026-03-13 Ausstellungsdatum: Issue date: 2026-03-16 Stellung / Position: Sachverständige(r)/Expert Stellung / Position: Sachverständige(r)/Expert Sonstiges / Other: FCC ID: FHO-E2435 Zustand des Prüfgegenstandes bei Anlieferung: Condition of the test item at delivery: Prüfmuster vollständig und unbeschädigt Test item complete and undamaged * Legende: P(ass) = entspricht o.g. Prüfgrundlage(n) F(ail) = entspricht nicht o.g. Prüfgrundlage(n) N/A = nicht anwendbar N/T = nicht getestet * Legend: P(ass) = passed a.m. test specification(s) F(ail) = failed a.m. test specification(s) N/A = not applicable N/T = not tested Dieser Prüfbericht bezieht sich nur auf das o.g. Prüfmuster und darf ohne Genehmigung der Prüfstelle nicht auszugsweise vervielfältigt werden. Dieser Bericht berechtigt nicht zur Verwendung eines Prüfzeichens. This test report only relates to the above mentioned test sample. Without permission of the test center this test report is not permitted to be duplicated in extracts. This test report does not entitle to carry any test mark. TUV Rheinland (Shenzhen) Co., Ltd., 1601-1604, 1801-1804, Tower A Building 2, Shenzhen International Innovation Valley, Dashi 1st Road, Xili Street, Xili Community, Nanshan District, Shenzhen, 518000 Mail: [email protected] · Web: www.tuv.com V101023GCNSR Hardy Suo Bell Hu Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: CN25Z40K 003 Test report no.: Seite 2 von 13 Page 2 of 13 Anmerkungen Remarks 1 Alle eingesetzten Prüfmittel waren zum angegebenen Prüfzeitraum gemäß eines festgelegten Kalibrierungsprogramms unseres Prüfhauses kalibriert. Sie entsprechen den in den Prüfprogrammen hinterlegten Anforderungen. Die Rückverfolgbarkeit der eingesetzten Prüfmittel ist durch die Einhaltung der Regelungen unseres Managementsystems gegeben. Detaillierte Informationen bezüglich Prüfkonditionen, Prüfequipment und Messunsicherheiten sind im Prüflabor vorhanden und können auf Wunsch bereitgestellt werden. The equipment used during the specified testing period was calibrated according to our test laboratory calibration program. The equipment fulfils the requirements included in the relevant standards. The traceability of the test equipment used is ensured by compliance with the regulations of our management system. Detailed information regarding test conditions, equipment and measurement uncertainty is available in the test laboratory and could be provided on request. 2 Wie vertraglich vereinbart, wurde dieses Dokument nur digital unterzeichnet. Der TÜV Rheinland hat nicht überprüft, welche rechtlichen oder sonstigen diesbezüglichen Anforderungen für dieses Dokument gelten. Diese Überprüfung liegt in der Verantwortung des Benutzers dieses Dokuments. Auf Verlangen des Kunden kann der TÜV Rheinland die Gültigkeit der digitalen Signatur durch ein gesondertes Dokument bestätigen. Diese Anfrage ist an unseren Vertrieb zu richten. Eine Umweltgebühr für einen solchen zusätzlichen Service wird erhoben. Informationen zur Verifizierung der Authentizität unserer Dokumente erhalten Sie auf folgender Webseite: go.tuv.com/digital-signature As contractually agreed, this document has been signed digitally only. TUV Rheinland has not verified and unable to verify which legal or other pertaining requirements are applicable for this document. Such verification is within the responsibility of the user of this document. Upon request by its client, TUV Rheinland can confirm the validity of the digital signature by a separate document. Such request shall be addressed to our Sales department. An environmental fee for such additional service will be charged. For information on verifying the authenticity of our documents, please visit the following website: go.tuv.com/digital-signature 3 Prüfklausel mit der Note * wurden an qualifizierte Unterauftragnehmer vergeben und sind unter der jeweiligen Prüfklausel des Berichts beschrieben. Abweichungen von Prüfspezifikation(en) oder Kundenanforderungen sind in der jeweiligen Prüfklausel im Bericht aufgeführt. Test clauses with remark of * are subcontracted to qualified subcontractors and descripted under the respective test clause in the report. Deviations of testing specification(s) or customer requirements are listed in specific test clause in the report. 4 Die Entscheidungsregel für Konformitätserklärungen basierend auf numerischen Messergebnisen in diesem Prüfbericht basiert auf der "Null-Grenzwert-Regel" und der "Einfachen Akzeptanz" gemäß ILAC G8:2019 und IEC Guide 115:2023, es sei denn, in der auf Seite 1 dieses Berichts genannten angewandten Norm ist etwas anderes festgelegt oder vom Kunden gewünscht. Dies bedeutet, dass die Messunsicherheit nicht berücksichtigt wird und daher auch nicht im Prüfbericht angegeben wird. Zu weiteren Informationen bezueglich des Risikos durch diese Entscheidungsregel siehe ILAC G8:2019. The decision rule for statements of conformity, based on numerical measurement results, in this test report is based on the “Zero Guard Band Ru…

Text truncated - open the document above for the full version.