FHO-J2229Birch tree with light 60 Inch floor

1 STRÅLA 2 English IMPORTANT SAFETY INSTRUCTIONS For indoor use only. Regularly check the cord, the tr ansformer and all other parts for damage. If any part is damaged the pr oduct should not be used. Important information! Keep these instructions for future use. CAUTION! The light source of this product is non- changeable light diodes (LED). Do not disassemble the product, as the light diodes can cause damage to the eyes. Do not immerse in water. Cleaning Use a damp cloth, never a strong cleaning agent. English CAUTION! Strangulation hazard. Hang out of reach of young children. English CAUTION This is an electric product - not a toy! injury and electric shock it should not be played with or placed where small children can reach it. Do not use this pr oduct for other than its intended use. Do not hang ornaments or other objects from cord, wire, or light string. Do not close doors or windows on the pr oduct or extension cords as this may damage the wire insulation. Do not cover the product with cloth, paper or any material not part of the pr oduct when in use. Read and follow all instructions that ar e on the product or provided with the product. English WARNING Deviation from the assembly or electric shock. 3 English IMPORTANT SAFETY INSTRUCTIONS When using electrical products, basic precautions should always be followed including the following: READ AND FOLLOW ALL SAFETY INSTRUCTIONS Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products are used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation. This seasonal use product is not intended for permanent installation or use. Do not mount or place near gas or electric heaters, fireplaces, candles or other similar sources of heat. Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails. Do not let lamps rest on the supply cord or on any wire. Unplug the product when leaving the house, when retiring for the night, or if left unattended. This is an electric product - not a toy! To avoid risk of fire, burns, personal injury and electric shock it should not be played with or placed where small children can reach it. Do not use this product for other than its intended use. Do not hang ornaments or other objects from cord, wire, or light string. Do not close doors or windows on the product or extension cords as this may damage the wire insulation. Do not cover the product with cloth, paper or any material not part of the product when in use. Read and follow all instructions that are on the product or provided with the product. English To reduce the risk of fire and electric shock: • Do not install on trees having needles, leaves, or branch coverings of metal or materials which look like metal. • Do not mount or support wires in a manner that can cut or damage wire insulation. English Do not close doors or windows on the product or extension cords as this may damage the wire insulation. 4 English This device complies with part 15 of the FCC Rules. Operation is subjected to the following two conditions: 1. This device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation. WARNING approved by the party responsible for compliance could void the user's authority to operate the equipment. English Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. English USE AND CARE INSTRUCTIONS Before using or reusing, inspect pr oduct carefully. Discard any products that have cut, damaged, or frayed wire insulation or cords, cracks in the lampholders or enclosures, loose connections, or exposed copper wire. When storing the product, carefully remove the product from wherever it is placed, including trees, branches, or bushes, to avoid any undue strain or stress on the product conductors, connections, and wires. When not in use, store neatly in a cool, dry location protected from sunlight. SAVE THESE INSTRUCTIONS 5 Français CONSIGNES DE SÉCURITÉ IMPORTANTES Uniquement pour une utilisation en intérieur. Vérifier régulièrement que le câble, le transformateur et les autres parties ne sont pas endommagés. Si l’une de ces pièces est endommagée, ne pas utiliser le produit. Information importante. Conserver la notice pour tout utilisation ultérieure. MISE EN GARDE La source lumineuse du produit est composée de diodes (LED) qui ne se remplacent pas. Ne jamais démonter le produit, les diodes peuvent causer des blessures aux yeux. Ne jamais immerger dans de l’eau. Entretien Nettoyer à l’aide d’un chiffon humide, éviter les détergents puissants. Français ATTENTION! Risque d’étranglement. Accrocher hors de portée des jeunes enfants. Français ATTENTION Ceci est un produit électrique, pas un jouet. Pour réduire le risque d’incendie, de blessure ou de décharge électrique, ne pas laisser un enfant jouer avec le produit. Le placer hors de portée des …

Text truncated - open the document above for the full version.

TCB Authority to Act as Agent Number: MS-0045317 Revision: 0 Effective date: Oct 8, 2021 Page 1 of 1 Authority to Act as Agent Date: _2022-07-26___ TUV Rheinland of North America, Inc. 1279 Quarry Lane., Suite. A Pleasanton, CA 94566 To Whom It May Concern: I appoint _Ms. Jessie Xu of TÜV Rheinland Shanghai Co., Ltd_ to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the FCC will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by TUV Rheinland Group, still resides with IKEA of Sweden AB/ Box 702, SE-343 81 Älmhult, Sweden. For TCB applications, We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Date: _______2022-07-26____________ Agreement is valid for 12 months from the above date. By: _________________________ _____ Ivan Susak_____ (Signature) (Print name) __ Product Engineering Manager _ ____ +46 476 64 85 00 _ (Title) (Telephone) On behalf of: __ IKEA of Sweden AB __ (Company Name)

Date: 2022-07-26 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd. Columbia MD 21046 Subject: Request for Confidentiality Ref: FCC ID: FHO-J2229 To whom it may concern: Permanent Confidentiality Request is hereby submitted by IKEA of Sweden AB to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential:  Block Diagram  Schematics  Part List Short-term Confidentiality Request is hereby submitted by IKEA of Sweden AB to withhold from public review for a period of 180 days from the date of the Grant of equipment Authorization and prior to marketing, certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC rules. In particular, the following sections of the application are to be kept confidential for a period of 180 days from the date of Authorization:  Test setup photos  External photos  Internal photos  User’s Manual Rationale for request for confidentiality: IKEA of Sweden AB has invested considerable time and materials in research and development to produce the referenced product. [Permanent confidentiality: Disclosure of the permanently confidential portions of the application to competitors would not only give them significant competitive advantages in develop similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us.] [Short term confidentiality: Disclosure of the short-term confidential portions of this application during the period of importation and/or distribution would reveal key aspects of proprietary technology to competitors and diminish the value of our investment in research and development. Sincerely, _____________________ Name Ivan Susak Title Product Engineering Manager IKEA of Sweden AB E-mail [email protected] Telephone number +46 476 64 85 00

Attachment 1 - Page 1 of 2 - External Photos Attachment 1 - Page 2 of 2 -

Label artwork Label location

Attachment 2 - Page 1 of 3 - Internal Photos LED driver openview LED driver PCB Attachment 2 - Page 2 of 3 - LED driver PCB Switch openview Attachment 2 - Page 3 of 3 - LED

TÜV Rheinland (Shanghai) Co., Ltd. No.177, 178, Lane 777 West Guangzhong Road, Jing'an District, Shanghai, China Mail: [email protected] Web: www.tuv.com Prüfbericht - Produkte Test report - Products Certificate #4301.01 Prüfbericht-Nr.: Test Report No.: CN22VZ0B 001 Auftrags-Nr.: Order No.: 244434826 Seite 1 von 19 Page 1 of 19 Kunden-Referenz-Nr.: Client Reference No.: 1288983 Auftragsdatum: Order date.: 2022-07-06 Auftraggeber: Client: IKEA of Sweden AB Box 702, SE-343 81 Älmhult, Sweden Prüfgegenstand: Test item: Birch tree with light 60 Inch floor Bezeichnung / Typ-Nr.: Identification / Type No.: J2229 STRÅLA Auftrags-Inhalt: Order content: TÜV Rheinland EMC service Prüfgrundlage: Test specification: FCC 47 CFR Part 15, Subpart B:2020 Class B ICES-005:2018 Wareneingangsdatum: Date of receipt: 2022-06-26 Refer to the EUT photos file Prüfmuster-Nr.: Test sample No.: A003282875-006 Prüfzeitraum: Testing period: Refer to test report Ort der Prüfung: Place of testing: Refer to clause 1.1 Prüflaboratorium: Testing laboratory: TÜV Rheinland (Shanghai) Co., Ltd. Prüfergebnis*: Test result*: Pass geprüft von: / tested by: Jessie Xu Datum: / Date: 2022-08-11 Stellung: / Position: Project manager genehmigt von: / authorized by: Xuelan Zhang Datum: / Date: 2022-08-11 Stellung: / Position: Senior project manager Sonstiges / Other: FCC ID: FHO-J2229 Test Firm Registration Number: 958801 Zustand des Prüfgegenstandes bei Anlieferung: Condition of the test item at delivery: Prüfmuster vollständig und unbeschädigt Test item complete and undamaged * Legende: P(ass) = entspricht o.g. Prüfgrundlage(n) F(ail) = entspricht nicht o.g. Prüfgrundlage(n) N/A = nicht anwendbar N/T = nicht getestet Legend: P(ass) = passed a.m. test specifications(s) F(ail) = failed a.m. test specifications(s) N/A = not applicable N/T = not tested Dieser Prüfbericht bezieht sich nur auf das o.g. Prüfmuster und darf ohne Genehmigung der Prüfstelle nicht auszugsweise vervielfältigt werden. Dieser Bericht berechtigt nicht zur Verwendung eines Prüfzeichens. This test report only relates to the a. m. test sample. Without permission of the test center this test report is not permitted to be duplicated in extracts. This test report does not entitle to carry any test mark. Prüfbericht - Produkte Test report - Products Prüfbericht - Nr.: Test Report No.: CN22VZ0B 001 Seite 2 von 19 Page 2 of 19 TEST SUMMARY 5.1.1 CONDUCTED EMISSION Result: Passed 5.2.1 RADIATED EMISSION Result: Passed Prüfbericht - Produkte Test report - Products Prüfbericht - Nr.: Test Report No.: CN22VZ0B 001 Seite 3 von 19 Page 3 of 19 Contents 1 TEST SITES ...................................................................................................................................................... 4 1.1 TEST FACILITIES ............................................................................................................................................ 4 2 GENERAL PRODUCT INFORMATION ...................................................................................................... 5 2.1 PRODUCT FUNCTION AND INTENDED USE ...................................................................................................... 5 2.2 RATINGS AND SYSTEM DETAILS .................................................................................................................... 5 2.3 INDEPENDENT OPERATION MODES ................................................................................................................ 5 2.4 DESCRIPTION OF INTERCONNECTING CABLES ................................................................................................. 5 2.5 NOISE GENERATING AND NOISE SUPPRESSING PARTS ................................................................................... 5 2.6 HIGHEST FREQUENCY GENERATED OR USED IN THE DEVICE OR ON WHICH THE DEVICE OPERATES OR TUNES 5 2.7 SUBMITTED DOCUMENTS ............................................................................................................................... 5 3 TEST SET-UP AND OPERATION MODES ................................................................................................. 6 3.1 PRINCIPLE OF CONFIGURATION SELECTION ................................................................................................... 6 3.2 EQUIPMENT AND CABLE ARRANGEMENT ........................................................................................................ 6 3.3 TEST SOFTWARE ............................................................................................................................................ 7 3.4 SPECIAL ACCESSORIES AND AUXILIARY EQUIPMENT .................................................................................... 7 3.5 COUNTERMEASURES TO ACHIEVE EMC COMPLIANCE ................................................................................... 7 4 CONFORMITY DECISION RULE ................................................................................................................ 8 5 TEST RESULTS E M I S S I O N ................................................................................................................. 9 5.1 EMISSION IN THE FREQUENCY RANGE UP TO 30 MHZ .................................................................................... 9 5.1.1 Conducted emission .............................................................................................................................. 9 5.2 EMISSION IN THE FREQUENCY RANGE ABOVE 30 MHZ ................................................................................ 13 5.2.1 Radiated emission ............................................................................................................................... 13 6 PHOTOGRAPHS OF THE TEST SET-UP .................................................................................................. 17 7 LIST OF TEST AND MEASUREMENT INSTRUMENTS ...............................................................…

Text truncated - open the document above for the full version.

Attachment 3 - Page 1 of 1 - Test Set-up Photos Photograph 1: Set-up for measurement of conducted emission Photograph 2: Set-up for measurement of radiated emission