FHO-J2248STRALA LED decorative lighting

1 STRÅLA 2AA-2373325-2 English J2248 IMPORTANT SAFETY INSTRUCTIONS When using electrical products, basic precautions should always be followed including the following: READ AND FOLLOW ALL SAFETY INSTRUCTIONS Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products are used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation. This seasonal use product is not intended for permanent installation or use. Do not mount or place near gas or electric heaters, fireplaces, candles or other similar sources of heat. 3 Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails. Do not let lamps rest on the supply cord or on any wire. Unplug the product when leaving the house, when retiring for the night, or if left unattended. This is an electric product - not a toy! To avoid risk of fire, burns, personal injury and electric shock it should not be played with or placed where small children can reach it. Do not use this product for other than its intended use. Do not hang ornaments or other objects from cord, wire, or light string. Do not close doors or windows on the product or extension cords as this may damage the wire insulation. Do not cover the product with cloth, paper or any material not part of the product when in use. Read and follow all instructions that are on the product or provided with the product. 4AA-2373325-2 English USE AND CARE INSTRUCTIONS Before using or reusing, inspect product carefully. Discard any products that have cut, damaged, or frayed wire insulation or cords, cracks in the lampholders or enclosures, loose connections, or exposed copper wire. When storing the product, carefully remove the product from wherever it is placed, including trees, branches, or bushes, to avoid any undue strain or stress on the product conductors, connections, and wires. When not in use, store neatly in a cool, dry location protected from sunlight. English This device complies with part 15 of the FCC Rules. Operation is subjected to the following two conditions: 1. This device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation. 5 WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. English Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. 6AA-2373325-2 English READ AND FOLLOW ALL SAFETY INSTRUCTIONS This decorative item is not intended for use by people (including children) whose physical, sensory or mental capabilities are different or reduced, or who lack experience or knowledge, unless they are otherwise supervised. Children must be supervised to ensure that items are not used as toys. CAUTION and mind the following. To reduce the risk of fire and electric shock: - Disconnect decorative item from power source before performing any maintenance or cleaning activity. - Do not place or hang near gas installations or electric heaters, fireplaces, candles, or other similar heating sources. - Disconnect the item when leaving the house, going to bed, or if left unattended. - Do not cover decorative item with fabric, paper or any material that is not part of the product when it is being used. - Do not use decorative item outdoors. 7 English CAUTION: To reduce the risk of fire and electric shock: do not install on trees having needles, leaves, or branch coverings of metal or materials which look like metal; and do not mount or support wires in a manner that can cut or damage wire insulation. English WARNING Deviation from the assembly instructions may result in a risk of fire or electric shock. SAVE THESE INSTRUCTIONS 8AA-2373325-2 Français J2248 CONSIGNES DE SÉCURITÉ IMPORTANTES Lors de l'utilisation de produits électriques, toujours respecter les consignes de sécurité, notamment les suivantes: LIRE ET RESPECTER TOUTES LES CONSIGNES DE SECURITE Ne pas utiliser les articles saisonniers à l'extérieur s'il n'est pas précisé qu'ils peuvent être utilisés à l'intérieur et à l'extérieur. Pour une utilisation à l'extérieur, le produit doit être branché à une protection de fuite à la terre. Si ce type d'équipement n'est pas inclus, contacter un électricien pour qu'il approuve l'installation. Ce produit saisonnier n'est pas destiné à une installation fixe ou à une utilisation permanente. Ne doit pas être monté ou placé à proximité d'un radiateur à gaz ou électrique, d'une cheminée, d'une bougie ou autre source de chaleur similaire. 9 Ne pas fixer les fils électriques avec des agrafes ou des clous. Les ampoules ne doivent pas reposer contre un câble d'alimentation ou autre câble. Débrancher le produit lorsque vous quittez le domicile, lorsque vous allez vous coucher ou laissez le produit est sans sur…

Text truncated - open the document above for the full version.

Date: 2022-12-09 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 To Whom It May Concern: The IKEA of Sweden AB, the undersigned, hereby authorizes Ms. Jessie Xu of TÜV Rheinland Shanghai Co., Ltd, to act on the behalf of the IKEA of Sweden AB solely in matters relating to the application for an FCC equipment authorization for FHO-J2248 including the signing of documents in connection with this Application. Necessary acts carried out by Ms. Jessie Xu of TÜV Rheinland Shanghai Co., Ltd. on our behalf of the IKEA of Sweden AB in connection with the Application shall have the same effect as acts of the IKEA of Sweden AB. The IKEA of Sweden AB also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Thank you for your attention to this matter. Yours Sincerely, Name : Ivan Susak Title：Product Engineering Manager Company：IKEA of Sweden AB

Date: 2022-12-09 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd. Columbia MD 21046 Subject: Request for Confidentiality Ref: FCC ID: FHO-J2248 To whom it may concern: Permanent Confidentiality Request is hereby submitted by IKEA of Sweden AB to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential:  Block Diagram  Schematics  Part List Short-term Confidentiality Request is hereby submitted by IKEA of Sweden AB to withhold from public review for a period of 180 days from the date of the Grant of equipment Authorization and prior to marketing, certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC rules. In particular, the following sections of the application are to be kept confidential for a period of 180 days from the date of Authorization:  Test setup photos  External photos  Internal photos  User’s Manual Rationale for request for confidentiality: IKEA of Sweden AB has invested considerable time and materials in research and development to produce the referenced product. [Permanent confidentiality: Disclosure of the permanently confidential portions of the application to competitors would not only give them significant competitive advantages in develop similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us.] [Short term confidentiality: Disclosure of the short-term confidential portions of this application during the period of importation and/or distribution would reveal key aspects of proprietary technology to competitors and diminish the value of our investment in research and development. Sincerely, _____________________ Name Ivan Susak Title Product Engineering Manager IKEA of Sweden AB E-mail [email protected] Telephone number +46 476 64 85 00

Attachment 1 - Page 1 of 2 - External Photos Attachment 1 - Page 2 of 2 -

Artwork Label Label location

Attachment 2 - Page 1 of 4 - Internal Photos Attachment 2 - Page 2 of 4 - Attachment 2 - Page 3 of 4 - Attachment 2 - Page 4 of 4 -

TÜV Rheinland (Shanghai) Co., Ltd. No.177, 178, Lane 777 West Guangzhong Road, Jing'an District, Shanghai, China Mail: [email protected] Web: www.tuv.com Prüfbericht - Produkte Test report - Products Certificate #4301.01 Prüfbericht-Nr.: Test Report No.: CN22SE1O 001 Auftrags-Nr.: Order No.: 244456947 Seite 1 von 19 Page 1 of 19 Kunden-Referenz-Nr.: Client Reference No.: 1288983 Auftragsdatum: Order date.: 2022-10-21 Auftraggeber: Client: IKEA of Sweden AB Box 702, SE-343 81 Älmhult, Sweden Prüfgegenstand: Test item: STRÅLA LED decorative lighting Bezeichnung / Typ-Nr.: Identification / Type No.: J2248 STRÅLA Auftrags-Inhalt: Order content: TÜV Rheinland EMC service Prüfgrundlage: Test specification: FCC Part 15, Subpart B:2021 Class B ICES-005:2018 Wareneingangsdatum: Date of receipt: 2022-10-20 Refer to the EUT photos file Prüfmuster-Nr.: Test sample No.: A003357108-004 Prüfzeitraum: Testing period: Refer to test report Ort der Prüfung: Place of testing: Refer to clause 1.1 Prüflaboratorium: Testing laboratory: TÜV Rheinland (Shanghai) Co., Ltd. Prüfergebnis*: Test result*: Pass geprüft von: / tested by: Jessie Xu Datum: / Date: 2022-12-12 Stellung: / Position: Project manager genehmigt von: / authorized by: Hexiong Liu Datum: / Date: 2022-12-12 Stellung: / Position: Department manager Sonstiges / Other: FCC ID: FHO-J2248 Test Firm Registration Number: 958801 Zustand des Prüfgegenstandes bei Anlieferung: Condition of the test item at delivery: Prüfmuster vollständig und unbeschädigt Test item complete and undamaged * Legende: P(ass) = entspricht o.g. Prüfgrundlage(n) F(ail) = entspricht nicht o.g. Prüfgrundlage(n) N/A = nicht anwendbar N/T = nicht getestet Legend: P(ass) = passed a.m. test specifications(s) F(ail) = failed a.m. test specifications(s) N/A = not applicable N/T = not tested Dieser Prüfbericht bezieht sich nur auf das o.g. Prüfmuster und darf ohne Genehmigung der Prüfstelle nicht auszugsweise vervielfältigt werden. Dieser Bericht berechtigt nicht zur Verwendung eines Prüfzeichens. This test report only relates to the a. m. test sample. Without permission of the test center this test report is not permitted to be duplicated in extracts. This test report does not entitle to carry any test mark. Prüfbericht - Produkte Test report - Products Prüfbericht - Nr.: Test Report No.: CN22SE1O 001 Seite 2 von 19 Page 2 of 19 TEST SUMMARY 5.1.1 CONDUCTED EMISSION Result: Passed 5.2.1 RADIATED EMISSION Result: Passed Prüfbericht - Produkte Test report - Products Prüfbericht - Nr.: Test Report No.: CN22SE1O 001 Seite 3 von 19 Page 3 of 19 Contents 1 TEST SITES ...................................................................................................................................................... 4 1.1 TEST FACILITIES ............................................................................................................................................ 4 2 GENERAL PRODUCT INFORMATION ...................................................................................................... 5 2.1 PRODUCT FUNCTION AND INTENDED USE ...................................................................................................... 5 2.2 RATINGS AND SYSTEM DETAILS .................................................................................................................... 5 2.3 INDEPENDENT OPERATION MODES ................................................................................................................ 5 2.4 DESCRIPTION OF INTERCONNECTING CABLES ................................................................................................. 5 2.5 NOISE GENERATING AND NOISE SUPPRESSING PARTS ................................................................................... 5 2.6 HIGHEST FREQUENCY GENERATED OR USED IN THE DEVICE OR ON WHICH THE DEVICE OPERATES OR TUNES 5 2.7 SUBMITTED DOCUMENTS ............................................................................................................................... 5 3 TEST SET-UP AND OPERATION MODES ................................................................................................. 6 3.1 PRINCIPLE OF CONFIGURATION SELECTION ................................................................................................... 6 3.2 EQUIPMENT AND CABLE ARRANGEMENT ........................................................................................................ 6 3.3 TEST SOFTWARE ............................................................................................................................................ 7 3.4 SPECIAL ACCESSORIES AND AUXILIARY EQUIPMENT .................................................................................... 7 3.5 COUNTERMEASURES TO ACHIEVE EMC COMPLIANCE ................................................................................... 7 4 CONFORMITY DECISION RULE ................................................................................................................ 8 5 TEST RESULTS E M I S S I O N ................................................................................................................. 9 5.1 EMISSION IN THE FREQUENCY RANGE UP TO 30 MHZ .................................................................................... 9 5.1.1 Conducted emission .............................................................................................................................. 9 5.2 EMISSION IN THE FREQUENCY RANGE ABOVE 30 MHZ ................................................................................ 13 5.2.1 Radiated emission ............................................................................................................................... 13 6 PHOTOGRAPHS OF THE TEST SET-UP .................................................................................................. 17 7 LIST OF TEST AND MEASUREMENT INSTRUMENTS ........................................................................ 18 8 LI…

Text truncated - open the document above for the full version.

Attachment 3 - Page 1 of 1 - Test Set-up Photos Photograph 1: Set-up for measurement of conducted emission Photograph 2: Set-up for measurement of radiated emission