FHO-L21124m RGBW Flex Lighting Strip

1 ORMANÄS 2AA-2364565-1 English IMPORTANT SAFETY INSTRUCTIONS For indoor use only. Regularly check the cord, the transformer and all other parts for damage. If any part is damaged the product should not be used. Important information! Keep these instructions for future use. CAUTION! The light source of this product is non- changeable light diodes (LED). Do not disassemble the product, as the light diodes can cause damage to the eyes. Do not immerse in water. Cleaning Use a damp cloth, never a strong cleaning agent. English 1. Wipe the surface dry where the tape will be used with a clean and dry cloth. 2. The assembly tape is permanent and is not intended to be removed. You might damage the surface under the lamp if you try to remove the tape. 3. Please keep the unused fittings for future use. English WARNING Deviation from the assembly instructions may result in a risk of fire or electric shock. English Only for use with LED driver with Class 2 output or Class 2 Power supply or Limited Power Source (LPS): rated 24 VDC, max. 3A, max. 15W. 3 English This device complies with Part 15 of the FCC Rules/Innovation Science and Economic Development Canada's licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. WARNING: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the quipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. SAVE THESE INSTRUCTIONS 4AA-2364565-1 Français CONSIGNES DE SÉCURITÉ IMPORTANTES Uniquement pour une utilisation en intérieur. Vérifier régulièrement que le câble, le transformateur et les autres parties ne sont pas endommagés. Si l'une de ces pièces est endommagée, ne pas utiliser le produit. Information importante. Conserver la notice pour tout utilisation ultérieure. MISE EN GARDE La source lumineuse du produit est composée de diodes (LED) qui ne se remplacent pas. Ne jamais démonter le produit, les diodes peuvent causer des blessures aux yeux. Ne jamais immerger dans de l'eau. Entretien Nettoyer à l’aide d’un chiffon humide, éviter les détergents puissants. Français 1. Bien sécher la surface où le ruban adhésif va être utilisé à l’aide d’un chiffon propre et sec. 2. Le ruban de montage est permanent et ne doit pas être retiré. Décoller le ruban adhésif risque d'abîmer le dessous de la lampe. 3. Conserver les fixations inutilisées pour un usage ultérieur. Français ATTENTION Tout écart par rapport aux instructions d'assemblage peut entraîner un risque d'incendie ou de choc électrique. Français À utiliser uniquement avec un boîtier d'alimentation (driver) LED, sortie classe 2 ou alimentation classe 2 ou source d'alimentation limitée (LPS) : niveau 24 VDC, max. 3A, max. 15W. 5 Français Cet appareil est conforme à l’article 15 du règlement de la FCC, ainsi qu’aux normes d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. Son fonctionnement est autorisé aux deux conditions suivantes : (1) L’appareil ne doit pas produire de brouillage, (2) l’appareil doit accepter tout brouillage radioélectrique subi, même si cela est susceptible de compromettre son fonctionnement. ATTENTION: Tout changement ou modification apportés à cet appareil sans approbation expresse de la partie responsable de la conformité peut rendre nulle la capacité de l’utilisateur à utiliser cet appareil. REMARQUE: Cet appareil a été testé et il est conforme aux exigences relatives aux appareils électroniques de classe B, selon la section 15 des règles de la FCC (Commission fédérale des communications). Ces exigences sont prévues pour fournir une protection raisonnable contre les interférences nuisibles dans le cas d’une installation domestique. Cet appareil génère, utilise et peut émettre de l’énergie sous forme de fréquences radio. Si l’appareil n’est pas installé ou utilisé conformément aux instructions, il peut provoquer des interférences perturbant les communications radio. Il est cependant impossible de garantir l’absence totale d’interférences d’une installation donnée. Si cet appareil produit des interférences nuisibles à la réception radio/télévision, ce qui peut-être déterminé en mettant successivement l’appareil sous tension et hors tension, nous conseillons à l’utilisateur d’essayer de remédier à ce problème en suivant l’une des procédures suivantes: - Réorienter ou déplacer l’antenne de réception. - Augmenter la distance entre l’appareil et le récepteur. - Brancher l’appareil à une prise placée sur un circuit différent de celui auquel le récepteur est raccordé. - Contacter votre revendeur ou tout technicien radio/TV qualifié pour obtenir de l’aide. CONSERVER CES MESURES DE SÉCURITÉ 6AA-2364565-1 Español INSTRUCCIONES IMPORT…

Text truncated - open the document above for the full version.

Date: 2022-09-19 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 To Whom It May Concern: The IKEA of Sweden AB, the undersigned, hereby authorizes Ms. Jessie Xu of TÜV Rheinland Shanghai Co., Ltd, to act on the behalf of the IKEA of Sweden AB solely in matters relating to the application for an FCC equipment authorization for FHO-L2112 including the signing of documents in connection with this Application. Necessary acts carried out by Ms. Jessie Xu of TÜV Rheinland Shanghai Co., Ltd. on our behalf of the IKEA of Sweden AB in connection with the Application shall have the same effect as acts of the IKEA of Sweden AB. The IKEA of Sweden AB also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Thank you for your attention to this matter. Yours Sincerely, Name : Ivan Susak Title：Product Engineering Manager Company：IKEA of Sweden AB

Date: 2022-09-19 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd. Columbia MD 21046 Subject: Request for Confidentiality Ref: FCC ID: FHO-L2112 To whom it may concern: Permanent Confidentiality Request is hereby submitted by IKEA of Sweden AB to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential:  Block Diagram  Schematics  Part List Short-term Confidentiality Request is hereby submitted by IKEA of Sweden AB to withhold from public review for a period of 180 days from the date of the Grant of equipment Authorization and prior to marketing, certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC rules. In particular, the following sections of the application are to be kept confidential for a period of 180 days from the date of Authorization:  Test setup photos  External photos  Internal photos  User’s Manual Rationale for request for confidentiality: IKEA of Sweden AB has invested considerable time and materials in research and development to produce the referenced product. [Permanent confidentiality: Disclosure of the permanently confidential portions of the application to competitors would not only give them significant competitive advantages in develop similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us.] [Short term confidentiality: Disclosure of the short-term confidential portions of this application during the period of importation and/or distribution would reveal key aspects of proprietary technology to competitors and diminish the value of our investment in research and development. Sincerely, _____________________ Name Ivan Susak Title Product Engineering Manager IKEA of Sweden AB E-mail [email protected] Telephone number +46 476 64 85 00

Attachment 1 - Page 1 of 2 - External Photos Overall view Power supply Attachment 1 - Page 2 of 2 - Control Box Connector partly view

Attachment 2 - Page 1 of 4 - Internal Photos Inside control box PCB of control box Attachment 2 - Page 2 of 4 - PCB of control box Open view of power supply Attachment 2 - Page 3 of 4 - PCB of power supply PCB of power supply Attachment 2 - Page 4 of 4 - LED view

TÜV Rheinland (Shanghai) Co., Ltd. No.177, 178, Lane 777 West Guangzhong Road, Jing'an District, Shanghai, China Mail: [email protected] Web: www.tuv.com Prüfbericht - Produkte Test report - Products Certificate #4301.01 Prüfbericht-Nr.: Test Report No.: CN22TV2K 001 Auftrags-Nr.: Order No.: 244406010 Seite 1 von 21 Page 1 of 21 Kunden-Referenz-Nr.: Client Reference No.: 1288983 Auftragsdatum: Order date.: 2022-01-29 Auftraggeber: Client: IKEA of Sweden AB Box 702, SE-343 81 Älmhult, Sweden Prüfgegenstand: Test item: 4m RGBW Flex Lighting Strip Bezeichnung / Typ-Nr.: Identification / Type No.: L2112 ORMANÄS Auftrags-Inhalt: Order content: TÜV Rheinland EMC service Prüfgrundlage: Test specification: FCC 47 CFR Part 15, Subpart B:2020 Class B ICES-005:2018 Wareneingangsdatum: Date of receipt: 2022-01-28 Refer to the EUT photos file Prüfmuster-Nr.: Test sample No.: A003207407-001 Prüfzeitraum: Testing period: Refer to test report Ort der Prüfung: Place of testing: Refer to clause 1.1 Prüflaboratorium: Testing laboratory: TÜV Rheinland (Shanghai) Co., Ltd. Prüfergebnis*: Test result*: Pass geprüft von: / tested by: Jessie Xu Datum: / Date: 2022-11-11 Stellung: / Position: Project manager genehmigt von: / authorized by: Hexiong Liu Datum: / Date: 2022-11-11 Stellung: / Position: Department manager Sonstiges / Other: FCC ID: FHO-L2112 Test Firm Registration Number: 958801 Zustand des Prüfgegenstandes bei Anlieferung: Condition of the test item at delivery: Prüfmuster vollständig und unbeschädigt Test item complete and undamaged * Legende: P(ass) = entspricht o.g. Prüfgrundlage(n) F(ail) = entspricht nicht o.g. Prüfgrundlage(n) N/A = nicht anwendbar N/T = nicht getestet Legend: P(ass) = passed a.m. test specifications(s) F(ail) = failed a.m. test specifications(s) N/A = not applicable N/T = not tested Dieser Prüfbericht bezieht sich nur auf das o.g. Prüfmuster und darf ohne Genehmigung der Prüfstelle nicht auszugsweise vervielfältigt werden. Dieser Bericht berechtigt nicht zur Verwendung eines Prüfzeichens. This test report only relates to the a. m. test sample. Without permission of the test center this test report is not permitted to be duplicated in extracts. This test report does not entitle to carry any test mark. Prüfbericht - Produkte Test report - Products Certificate #4301.01 Prüfbericht - Nr.: Test Report No.: CN22TV2K 001 Seite 2 von 21 Page 2 of 21 TEST SUMMARY 5.1.1 CONDUCTED EMISSION Result: Passed 5.2.1 RADIATED EMISSION (30-1000 MHZ) Result: Passed 5.2.2 RADIATED EMISSION (1-18 GHZ) Result: Passed Prüfbericht - Produkte Test report - Products Certificate #4301.01 Prüfbericht - Nr.: Test Report No.: CN22TV2K 001 Seite 3 von 21 Page 3 of 21 Contents 1 TEST SITES ...................................................................................................................................................... 4 1.1 TEST FACILITIES ............................................................................................................................................ 4 2 GENERAL PRODUCT INFORMATION ...................................................................................................... 5 2.1 PRODUCT FUNCTION AND INTENDED USE ...................................................................................................... 5 2.2 RATINGS AND SYSTEM DETAILS .................................................................................................................... 5 2.3 INDEPENDENT OPERATION MODES ................................................................................................................ 5 2.4 DESCRIPTION OF INTERCONNECTING CABLES ................................................................................................. 5 2.5 NOISE GENERATING AND NOISE SUPPRESSING PARTS ................................................................................... 5 2.6 HIGHEST FREQUENCY GENERATED OR USED IN THE DEVICE OR ON WHICH THE DEVICE OPERATES OR TUNES 5 2.7 SUBMITTED DOCUMENTS ............................................................................................................................... 5 3 TEST SET-UP AND OPERATION MODES ................................................................................................. 6 3.1 PRINCIPLE OF CONFIGURATION SELECTION ................................................................................................... 6 3.2 EQUIPMENT AND CABLE ARRANGEMENT ........................................................................................................ 6 3.3 TEST SOFTWARE ............................................................................................................................................ 7 3.4 SPECIAL ACCESSORIES AND AUXILIARY EQUIPMENT .................................................................................... 7 3.5 COUNTERMEASURES TO ACHIEVE EMC COMPLIANCE ................................................................................... 7 4 CONFORMITY DECISION RULE ................................................................................................................ 8 5 TEST RESULTS E M I S S I O N ................................................................................................................. 9 5.1 EMISSION IN THE FREQUENCY RANGE UP TO 30 MHZ .................................................................................... 9 5.1.1 Conducted emission .............................................................................................................................. 9 5.2 EMISSION IN THE FREQUENCY RANGE ABOVE 30 MHZ ................................................................................ 13 5.2.1 Radiated emission (30-1000 MHz) ...................................................................................................... 13 5.2.2 Radiated Emission (1-18 GHz)............................................................................................................ 16 6 PHOTOGRAPH…

Text truncated - open the document above for the full version.

Attachment 3 - Page 1 of 2 - Test Set-up Photos Photograph 1: Set-up for measurement of conducted emission Photograph 2: Set-up for measurement of radiated emission Attachment 3 - Page 2 of 2 -