
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
1 GRÖNSLICK 2 AA-xxxxxxx-1 English FOR INDOOR USE ONLY! English CAUTION! The light source of this product is nonchangeable light diodes (LED). Do not disassemble the product, as the light diodes can cause damage to the eyes. English CAUTION! RISK OF ELECTRIC SHOCK. TURN OFF THE POWER BEFORE INSTALLATION. Use this product only for its intended use as described in these instructions. Do not use attachments not recom- mended by the manufacturer. CONSULT A QUALIFIED ELECTRICIAN TO ENSURE COR- RECT INSTALLATION. English THIS DEVICE IS NOT INTENDED FOR USE WITH EMERGEN- CY EXIT FIXTURES OR EMERGENCY EXIT LIGHTS. 3 English Not intended for use in free-standing portable luminaires English This device complies with part 15 of the FCC Rules. Operation is subjected to the following two conditions: 1. This device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation. WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. English NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer- ence in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to 4 AA-xxxxxxx-1 by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. 5 Français Pour une UTILISATION INTERIEURE! Français MISE EN GARDE! La source lumineuse du produit est composée de diodes (LED) qui ne se remplacent pas. Ne jamais démonter le produit, les diodes peuvent causer des blessures aux yeux. Français ATTENTION! RISQUE DE CHOC ÉLECTRIQUE COUPER L’ALIMENTATION AVANT L’INSTALLATION. N’utiliser ce produit que pour l’usage auquel il est destiné tel que décrit dans ces instructions. Ne pas utiliser de fixations autres que celles recommandées par le fabri- cant. FAIRE APPEL À UN ÉLECTRICIEN QUALIFIÉ POUR PROCÉ- DER À UNE INSTALLATION CORRECTE. Français CE PRODUIT NE DOIT PAS ÊTRE UTILISÉ AVEC DES PAN- CARTES OU ÉCLAIRAGES INDIQUANT UNE ISSUE DE SECOURS. 6 AA-xxxxxxx-1 Français Non destiné à être utilisé dans des luminaires portables sur pied Français Cet appareil est conforme à la partie 15 des règles de la FCC. Son fonctionnement est soumis aux deux condi- tions suivantes: 1. Cet appareil ne doit pas provoquer de brouillage préjudiciable et 2. il doit accepter tout brouillage reçu, y compris le brouillage pouvant entraîner un mauvais fonctionne- ment. ATTENTION: Tout changement apporté à cet appareil non expressé- ment approuvé par la partie responsable de la confor- mité est susceptible d’annuler le droit de l’utilisateur à se servir de cet équipement. Français NOTE: Cet équipement a été testé et déclaré conforme aux limites imposées aux appareils numériques de la classe B, en vertu de la partie 15 des règles de la FCC. Ces limites sont conçues pour assurer une protection suffisante contre les interférences nuisibles dans les installations résidentielles. Cet équipement génère, utilise et peut dégager de l’énergie de radiofréquence et, s’il n’est pas installé et utilisé conformément aux instructions du fabricant, provoquer un brouillage préjudiciable aux communications radio. Il n’existe 7 toutefois aucune garantie qu’un équipement particulier ne sera pas victime de brouillage. Si cet équipement entraîne un brouillage préjudiciable à la réception des émissions radio ou de télévision, identifiable en mettant le terminal hors puis sous tension, il est recommandé à l’utilisateur de tenter de résoudre ce problème au moyen d’une ou plusieurs des mesures suivantes: - Orienter l’antenne réceptrice différemment ou la changer de place. - Augmenter la distance séparant l’équipement du récepteur. - Connecter l’appareil à une prise sur un circuit différent de celui auquel est branché le récepteur. - Obtenir de l’aide auprès du revendeur ou d’un technicien radio/TV expérimenté. 8 AA-xxxxxxx-1 Español ¡PARA USO EN INTERIORES! Español ¡PRECAUCIÓN! Este producto utiliza diodos de luz no sustituibles (LED) como fuente de luz. No desmontar el producto, ya que los diodos de luz pueden dañar los ojos. Español ¡ATENCIÓN! RIESGO DE DESCARGA ELÉCTRICA. DESCONECTA LA ELEC- TRICIDAD ANTES DE LA INSTALACIÓN. Utiliza este producto solo para lo que ha sido diseñado, según se describe en estas instrucciones. No utilices fijaciones que no hayan sido recomendadas por el fabri- cante. PARA UNA CORRECTA INSTALACIÓN, CONSULTA A UN ELECTRICISTA PROFESIONAL. Español ESTE PRODUCTO NO SE DEBE USAR JUNTO CON CAR- TELERÍA O ILUMINACIÓN INDICADORA DE “SALIDA DE EMERGENCIA”. 9 Español No está diseñado para su uso en luminarias portátiles independientes. Español Este aparato cumple la parte 15 de las normas FCC. Su funcionamiento está sujeto a las dos condiciones siguientes: 1. Este aparato no debe provocar interferencias perjudi- ciales. 2. Debe aceptar cualquier interferencia que reciba, incluidas las interferencias que puedan suponer un mal funcionamiento. ATENCIÓN: Cualquier cambio o modificación que se realice sin ser aprobado expresamente por la parte responsable de la conformidad, es susceptible de anular el derecho del usuario a utilizar este equipo. Español NOT…
Text truncated - open the document above for the full version.
Date: 2022-12-12 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 To Whom It May Concern: The IKEA of Sweden AB, the undersigned, hereby authorizes Ms. Jessie Xu of TÜV Rheinland Shanghai Co., Ltd, to act on the behalf of the IKEA of Sweden AB solely in matters relating to the application for an FCC equipment authorization for FHO-LED2221R35K5 including the signing of documents in connection with this Application. Necessary acts carried out by Ms. Jessie Xu of TÜV Rheinland Shanghai Co., Ltd. on our behalf of the IKEA of Sweden AB in connection with the Application shall have the same effect as acts of the IKEA of Sweden AB. The IKEA of Sweden AB also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Thank you for your attention to this matter. Yours Sincerely, Name : Ivan Susak Title:Product Engineering Manager Company:IKEA of Sweden AB
Date: 2022-12-12 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd. Columbia MD 21046 Subject: Request for Confidentiality Ref: FCC ID: FHO-LED2221R35K5 To whom it may concern: Permanent Confidentiality Request is hereby submitted by IKEA of Sweden AB to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential:  Block Diagram  Schematics  Part List Short-term Confidentiality Request is hereby submitted by IKEA of Sweden AB to withhold from public review for a period of 180 days from the date of the Grant of equipment Authorization and prior to marketing, certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC rules. In particular, the following sections of the application are to be kept confidential for a period of 180 days from the date of Authorization:  Test setup photos  External photos  Internal photos  User’s Manual Rationale for request for confidentiality: IKEA of Sweden AB has invested considerable time and materials in research and development to produce the referenced product. [Permanent confidentiality: Disclosure of the permanently confidential portions of the application to competitors would not only give them significant competitive advantages in develop similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us.] [Short term confidentiality: Disclosure of the short-term confidential portions of this application during the period of importation and/or distribution would reveal key aspects of proprietary technology to competitors and diminish the value of our investment in research and development. Sincerely, _____________________ Name Ivan Susak Title Product Engineering Manager IKEA of Sweden AB E-mail [email protected] Telephone number +46 476 64 85 00
Attachment 1 - Page 1 of 2 - External Photos Attachment 1 - Page 2 of 2 -
Revision Comment Approved by Approved date Description ♦ ♦ ______________________________________________ Name Replaces document No. of Pages 1 (1) Doc number Version Measurements according to the SI systems. This drawing is IKEA` property and is covered by industrial and in-tellectual property rights and should, without written consent from IKEA, in no way be copied, re-produced or communicated or otherwise used for any other purpose other than that which has been agreed. A4 Template Version: 3.0 DRAWING IKEA of Sweden AB Marking_21633_ LED2221R35K5 E26_NA Marking Position
Attachment 2 - Page 1 of 3 - Internal Photos Attachment 2 - Page 2 of 3 - Attachment 2 - Page 3 of 3 -
TÜV Rheinland (Shanghai) Co., Ltd. No.177, 178, Lane 777 West Guangzhong Road, Jing'an District, Shanghai, China Mail: [email protected] W eb: www.tuv.com Prüfbericht - Produkte Test report - Products Certificate #4301.01 Prüfbericht-Nr.: Test Report No.: CN2299UM 001 Auftrags-Nr.: Order No.: 244453410 Seite 1 von 19 Page 1 of 19 Kunden-Referenz-Nr.: Client Reference No.: 1288983 Auftragsdatum: Order date.: 2022-10-12 Auftraggeber: Client: IKEA of Sweden AB Box 702, SE-343 81 Älmhult, Sweden Prüfgegenstand: Test item: Self-Ballasted LED Lamp Bezeichnung / Typ-Nr.: Identification / Type No.: LED2221R35K5 Auftrags-Inhalt: Order content: TÜV Rheinland EMC service Prüfgrundlage: Test specification: FCC Part 15, Subpart B:2021 Class B ICES-005:2018 Wareneingangsdatum: Date of receipt: 2022-11-06 Refer to the EUT photos file Prüfmuster-Nr.: Test sample No.: A003366537-002 Prüfzeitraum: Testing period: Refer to test report Ort der Prüfung: Place of testing: Refer to clause 1.1 Prüflaboratorium: Testing laboratory: TÜV Rheinland (Shanghai) Co., Ltd. Prüfergebnis*: Test result*: Pass geprüft von: / tested by: Jessie Xu Datum: / Date: 2022-11-26 Stellung: / Position: Project manager genehmigt von: / authorized by: Jiayi Zhou Datum: / Date: 2022-11-26 Stellung: / Position: Senior manager Sonstiges / Other: FCC ID: FHO-LED2221R35K5 Test Firm Registration Number: 958801 Zustand des Prüfgegenstandes bei Anlieferung: Condition of the test item at delivery: Prüfmuster vollständig und unbeschädigt Test item complete and undamaged * Legende: P(ass) = entspricht o.g. Prüfgrundlage(n) F(ail) = entspricht nicht o.g. Prüfgrundlage(n) N/A = nicht anwendbar N/T = nicht getestet Legend: P(ass) = passed a.m. test specifications(s) F(ail) = failed a.m. test specifications(s) N/A = not applicable N/T = not tested Dieser Prüfbericht bezieht sich nur auf das o.g. Prüfmuster und darf ohne Genehmigung der Prüfstelle nicht auszugsweise vervielfältigt werden. Dieser Bericht berechtigt nicht zur Verwendung eines Prüfzeichens. This test report only relates to the a. m. test sample. Without permission of the test center this test report is not permitted to be duplicated in extracts. This test report does not entitle to carry any test mark. Prüfbericht - Produkte Test report - Products Prüfbericht - Nr.: Test Report No.: CN2299UM 001 Seite 2 von 19 Page 2 of 19 TEST SUMMARY 5.1.1 CONDUCTED EMISSION Result: Passed 5.2.1 RADIATED EMISSION Result: Passed Prüfbericht - Produkte Test report - Products Prüfbericht - Nr.: Test Report No.: CN2299UM 001 Seite 3 von 19 Page 3 of 19 Contents 1 TEST SITES ................................................................................................................................................ 4 1.1 TEST FACILITIES....................................................................................................................................... 4 2 GENERAL PRODUCT INFORMATION .................................................................................................. 5 2.1 PRODUCT FUNCTION AND INTENDED USE .................................................................................................. 5 2.2 RATINGS AND SYSTEM DETAILS................................................................................................................ 5 2.3 INDEPENDENT OPERATION MODES ............................................................................................................ 5 2.4 DESCRIPTION OF INTERCONNECTING CABLES ............................................................................................. 5 2.5 NOISE GENERATING AND NOISE SUPPRESSING PARTS ................................................................................ 5 2.6 HIGHEST FREQUENCY GENERATED OR USED IN THE DEVICE OR ON WHICH THE DEVICE OPERATES OR TUNES . 5 2.7 SUBMITTED DOCUMENTS .......................................................................................................................... 5 3 TEST SET-UP AND OPERATION MODES .............................................................................................. 6 3.1 PRINCIPLE OF CONFIGURATION SELECTION ............................................................................................... 6 3.2 EQUIPMENT AND CABLE ARRANGEMENT.................................................................................................... 6 3.3 TEST SOFTWARE ...................................................................................................................................... 7 3.4 SPECIAL ACCESSORIES AND AUXILIARY EQUIPMENT ................................................................................. 7 3.5 COUNTERMEASURES TO ACHIEVE EMC COMPLIANCE ................................................................................ 7 4 CONFORMITY DECISION RULE ............................................................................................................ 8 5 TEST RESULTS E M I S S I O N ............................................................................................................. 9 5.1 EMISSION IN THE FREQUENCY RANGE UP TO 30 MHZ ................................................................................ 9 5.1.1 Conducted emission ......................................................................................................................... 9 5.2 EMISSION IN THE FREQUENCY RANGE ABOVE 30 MHZ ............................................................................. 13 5.2.1 Radiated emission .......................................................................................................................... 13 6 PHOTOGRAPHS OF THE TEST SET-UP .............................................................................................. 17 7 LIST OF TEST AND MEASUREMENT INSTRUMENTS ..................................................................... 18 8 LIST OF FIGURES .....................................................................................…
Text truncated - open the document above for the full version.
Attachment 3 - Page 1 of 1 - Test Set-up Photos Photograph 1: Set-up for measurement of conducted emission Photograph 2: Set-up for measurement of radiated emission
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15B | - | - |
Door window sensor
Equipment Class
JAB - Part 15 Class B Digital DeviceLED lamp
Equipment Class
JAV - Other Non-Digital SDoC DevicesLED lamp
Equipment Class
JAV - Other Non-Digital SDoC DevicesRemote Control (Scroll Wheel)
Equipment Class
JAB - Part 15 Class B Digital Device