FYOTRANSMITTERF-DOLPHIN AIRMOUSE

Media Player Control Play/Pause Click: STOP Double Click: ESC Pre Next Click: MuteDouble Click: Switch on/off Soft KeyboardHold Press: Adjust Volume through Wrist Movement Raise wrist to increase the volumeLower wrist to decrease the volume F-Dolphin Air Mouse Guide KehWin Device LED Power (A1) MIC (A7) Mouse Left Button (A20) USB Receiver A13 Run LED Hold press “power” key [A1] more than 1.5 second, power on Air Mouse;If Run Led rhythmically flashes in blue, indicate that air mouse is connected with USB receiver properly, can start to use;If Run Led rhythmically flashes in pink and blue, indicate that air mouse is not connected with USB receiver properly;*Please check if USB receiver is properly installed in host device. If USB receiver is properly installed, need to start regist ration process.Hold press “SRC/M” key [A13] more than 4 seconds, start registration process between air mouse and USB receiver. Vibration indicates the registration process is properly finished and Run Led recovers to rhythmically flash in blue. Step 1 ͵ Power On Up/Down/Left/Right key. Detailed Description please refer to Key Definition Table.Support Finger touch Mouse Wheel roll and slide control rolling clockwise: Mouse Scrolls Downrolling counter-clock wise: Mouse Scrolls Up Slide from Left to Right ˖ End Slide from Right to Left ˖ Home Slide Downward ˖ Page Down Slide Upward ˖ Page Up Described as Default. Can be configured as different control functions on requirement. Cross Arrow Key and Touch Control Can be Configured as PC Windows Mode or Android Mode according to different Host Device Platforms Device Mode Control Back Menu Search Mouse Right Button Mouse Right Button Return Click: Swap task WindowDouble Click: Close task Window Space Click: HomeDouble Click: Switchon/off F-Dolphin Driver Click: Back to Windows DesktopDouble Click: Switch on/offF-Dolphin Driver Android Mode PC Windows Mode DEV:Hold Press more than 1.5 second, Swap between 2.4G RF controlled device and IR controlled device. :Hold Press more than 1.5 second, Power on/off remote device under control; Double Click, Switch on/off Laser Pointer Mode. SRC/M:Click, switch on/off Mouse/Key Game Mode; Double Click, switch on/off Motion Game Mode;Hold Press more than 4 seconds, start registration process between air mouse and USB receiver. Device Mode Control Click "MIC"(A7) key to switch on audio input function. When F-Dolphin Audio Input function is on, the “Run” LED flashes Blue quickly. Click "MIC" key again to switch off audio input function.When Audio input function is on, fingers touch "Mouse Left Button" key will suspend audio input function and switch on mouse function, after fingers remove from "Mouse Left Button" key, audio input function will recover.KehWin-Device Driver support more features such as Audio Input parameters adjustment and field Record/Play, detailed information please refer to KehWin-Device Driver documents. Step 3 ͵ Audio Input Forefinger touch Mouse Left Button [A20] to turn on mouse output; forefinger leave Mouse Left Button to turn off mouse output. Keep forefinger touch Mouse Left Button, slightly rotate the wrist to move the mouse cursor anywhere on the screen.Keep F-Dolphin in *approximately horizontal (angle of inclination is between -45 to 45 degrees with the horizontal plane) can g et better experience. Use F-Dolphin with any adjustable posture to ensure ease and comfort. Loosen forefinger not touch “Mouse Left Button” if it needs to adjust the alignment relation of F-Dolphin and screen cursor whe n in use, adjust wrist posture to make F-Dolphin align to cursor, and then touch “Mouse Left Button” with forefinger for continuo us use.In applications (for example, shooting and clicking games) if fast clicking and tracking is needed, click "SRC/M"(A13) key to t urn on Mouse-Key Game Mode. Detailed operation please refer to Step 4. Step 2 ͵ Mouse Operation Press and push to open back cover;Pick the USB Receiver from back cover;Plug the USB receiver in the Host Device's USB port; Can place the USB Receiver into back cover when not used. Install USB Receiver Double click " " Key to enter into Laser Pointer Mode;In Laser Pointer Mode, Keep press Mouse Left Button to output laser, Loosen Mouse Left Button to close laser output;Double click " " Key again to leave Laser Pointer Mode and recover to normal mouse operation; *When enter into Laser Pointer mode, Run LED keeps lighting in Blue. And F-Dolphin is only used as a Laser Pointer, other functions are disabled. Laser Pointer Hold press "DEV" key more than 1.5 second to enter into IR Remoter Mode.In IR Remoter mode, click "DEV" to switch target device between defined IR remote control Devices, the key function of the remoter is defined by KehWin-Device Driver installed on Host, and the key function definition may be different from devices. Hold press "DEV" key more than 1.5 second again to leave IR Remoter Mode and recover to normal mouse operation. *When enter into IR Remoter Mode, Run LED is dark, and corresponding device LED keeps lighting. In IR Remoter Mode, F-Dolphin is only used as an IR Remoter. IR Remoter Press and push to open the back cover *When enter into Motion Game mode, Run LED flashes slowly in Blue and Pink. * When enter into Mouse/Key Game mode, Run Led flashes quickly in Blue and Pink. Step4 ͵ Game Operation Mouse/Key Game operation : Click "SRC/M" key to switch on Mose/Key Game mode, mouse operation is the same as described in Step 2. After game is finished, click"SRC/M" key again to switch off Mose/Key Game mode and recover to normal mouse operation.Motion Game operation : Double click "SRC/M" key to switch on/off F-Dolphin Motion Game Mode. Detailed operation process described as follow: Open KehWin Device Driver and Click on selected Game button in Driver to switch on the game control function; and then run the game;After setting and selection process is finished by mouse and key operation, double click "SRC/M" key to switch on F-Dolphin Motio…

Text truncated - open the document above for the full version.

MCU U2 SE95BD-EM Battery 3V AAA*2 RF 2.4GHz RF U1 8713 DICE Sensor circuit U3 SE24C02 Crystal Y1 12.00MHz BLOCK ANTENNA

Shenzhen KehWin Technologies Co., Ltd. Date:2012-03-28 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD FCC ID: FYOTRANSMITTER To Whom It May Concern: This letter is to ascertain that Shenzhen KehWin Technologies Co., Ltd. Product F-Dolphin AirMouse has been the units used for conducting FCC compliance testing, the DoC part will be tested by FCC recognized test lab. If you have any question or concerns, pls. contact us. Sincerely, Signature: Title or printed name: Zhongliang Guo Title: Manager Company Name: Shenzhen KehWin Technologies Co., Ltd.

Appearance photograph of EUT Appearance photograph of EUT Appearance photograph of EUT Battery photograph of EUT Battery photograph of EUT

FCC ID LABEL FCC ID:FYOTRANSMITTER Label Location on EUT EUT Bottom View/ FCC ID Label Location

Main PCB photograph of EUT Main PCB photograph of EUT antenna

DESCRIPTION The power of whole mouse is supplied by battery, the mouse will work at 3 .7V. Sense component SE24C02(U3) can make the light signal transfer to electronic signal transfer through XY axis coding and then transfer to MCU SE95BD-EM(U2). Master MCU controls RF IC 8713DICE (U1) to get and send wir eless signal in 2402-2480MHZ frequency range, and controls LED, optical transducer, left and right button, trolley at the same time.

1 2 34 ABCD 4 3 2 1 D CBA Title Number Revision Size A4 Date: 27-Jul-2009 Sheet of File: E: \ B RF_CS# PKT_FLAG IIC_SCL IIC_SDAID_KEY Y112M C1424P*C1530P USBD+ USBD-SPI_MISORF_RST# SPI_CLK SPI_MOSI D+ 3 D- 2 VCC 1 GND 4 5 USBA VDD C134.7uF/10V USBD-USBD+ RF3V3 +1.8V +1.8V +1.8V C52.2uF C30.1uF SPI_MISORF_RST#SPI_CLKSPI_MOSIRF_CS#PKT_FLAG C20.1uF OSCI C10.1uF RFIX OSCI +1.8V C62.2nF C94.7uF/6.3V ANT PLL_VDD 2 VCO_VDD 3 ANT 4 GND 5 RF_VDD 6 IF_VDD 7 AMS_VDD 8 GND 12 PKT_FLAG 11 RXCLK 10 FIFO_FLAG 9 DIG_VDD 13 SPI_SS 14 SPI_MOSI 15 SPI_CLK 16 RESET_n 17 SPI_MISO 18 VDD_IO 19 LDO_VOUT 20 CKPHA 21 GND 22 VDD_IN 23 XTALO 24 XTALI 1 U1 8713 DICE C710nF L2 3.9nH R210K IIC_SDAIIC_SCL R13.3R 3V3 ANT1 SCL 1 GND 2 SDA 3 VCC 4 WP 5 U3SE24C02 3V3 GND GND 3V3 LED# VDD VDD C104.7uF/6.3V 3V3 GND OSCO 3V3 OSCOOSCI P56 8 P57 9 P60 10 P61 11 P62 12 P65 13 P66 14 VDD 15 OSCI 16 OSCO 17 VSS 18 V3.3 19 D+ 20 D- 1 P92 2 P93 3 P94 4 NC 5 P54 6 P55 7 U2 SE95BD-EM DICE C110.1uF C120.1uF CF1 1PF

FCC ID: FYOTRANSMITTER Page 1 FCC ID TEST REPORT for F-Dolphin AirMouse MODEL: KMsWand-06, KMsWand-08 Trade Mark: N/A FCC ID: FYOTRANSMITTER Test Report Number: WSCT11120846E-2 Issued Date: March 26, 2012 Issued for Shenzhen KehWin Technologies Co., Ltd. W2207-2209, Nanshan Digital-Culture Industrial Park, Shenzhen, China Issued By: WORLD STANDARDIZATION CERTIFICATION & TESTING CO., LTD. Building A, Baoshi Road, Baoshi Science & Technology Park, Bao'an District, Shenzhen, Guangdong, China TEL: +86-755-26996192 FAX: +86-755-26996253 Note: This report shall not be reproduced except in full, without the written approval of World Standardization Certification& Testing CO., LTD. This document may be altered or revised by World Standardization Certification& Testing CO., LTD. personnel only, and shall be noted in the revision section of the document. The test results in the report only apply to the tested sample. Report reference No.: WSCT11120846E-2 Issued: March 26, 2012 Revised: None TRF No.: FCC PART 15C-15.249/A0 Page 2 of 30 FCC ID: FYOTRANSMITTER This report shall not be reproduced except in full, without the written approval of World Standardization Certification & Testing CO., LTD. Revision History Of Report Rev. Issue No. Revisions Effect Page Revised By 00 WSCT11120846E-2 Initial Issue ALL Kallen Wang Report reference No.: WSCT11120846E-2 Issued: March 26, 2012 Revised: None TRF No.: FCC PART 15C-15.249/A0 Page 3 of 30 FCC ID: FYOTRANSMITTER This report shall not be reproduced except in full, without the written approval of World Standardization Certification & Testing CO., LTD. TABLE OF CONTENTS 1 TEST CERTIFICATION .............................................................................................. 4 2 TEST RESULT SUMMARY ....................................................................................... 5 3 EUT DESCRIPTION ................................................................................................... 6 4 TEST METHODOLOGY ............................................................................................. 7 4.1. DECISION OF FINAL TEST MODE ...................................................................................... 7 4.2. EUT SYSTEM OPERATION ................................................................................................. 7 5 SETUP OF EQUIPMENT UNDER TEST .................................................................... 8 5.1. DESCRIPTION OF SUPPORT UNITS ................................................................................. 8 5.2. CONFIGURATION OF SYSTEM UNDER TEST .................................................................. 8 6 FACILITIES AND ACCREDITATIONS ...................................................................... 9 6.1. FACILITIES ........................................................................................................................... 9 6.2. ACCREDITATIONS .............................................................................................................. 9 6.3. MEASUREMENT UNCERTAINTY ........................................................................................ 9 7 TEST REQUIREMENTS ........................................................................................... 10 7.1. CONDUCTED EMISSION MEASUREMENT ...................................................................... 10 7.2. Radiation Emission Test ..................................................................................................... 14 7.3. Band edge test .................................................................................................................... 21 8. ANTENNA REQUIREMENT ..................................................................................... 24 9 PHOTOGRAPHS OF THE TEST CONFIGURATION .............................................. 25 10 PHOTOGRAPHS OF EUT ....................................................................................... 27 Report reference No.: WSCT11120846E-2 Issued: March 26, 2012 Revised: None TRF No.: FCC PART 15C-15.249/A0 Page 4 of 30 FCC ID: FYOTRANSMITTER This report shall not be reproduced except in full, without the written approval of World Standardization Certification & Testing CO., LTD. 1 TEST CERTIFICATION Product: F-Dolphin AirMouse Model: KMsWand-06, KMsWand-08 Trade Mark N/A Applicant: Shenzhen KehWin Technologies Co., Ltd. W2207-2209, Nanshan Digital-Culture Industrial Park, Shenzhen, China Factory: Shenzhen KehWin Technologies Co., Ltd. W2207-2209, Nanshan Digital-Culture Industrial Park, Shenzhen, China Tested: December 26, 2011~ March 26, 2012 Test Voltage: AC 120V/60Hz Applicable Standards: FCC Part 15 Subpart C: 2010 ANSI C63.4:2003 The above equipment has been tested by World Standardization Certification & Testing Co., Ltd., and found compliance with the requirements set forth in the technical standards mentioned above. The results of testing in this report apply only to the product/system, which was tested. Other similar equipment will not necessarily produce the same results due to production tolerance and measurement uncertainties. Tested By: Date: March 26, 2012 (Jack Ma) Check By: Date: March 26, 2012 (Mike Mo) Approved By: Date: March 26, 2012 (Kallen Wang) Report reference No.: WSCT11120846E-2 Issued: March 26, 2012 Revised: None TRF No.: FCC PART 15C-15.249/A0 Page 5 of 30 FCC ID: FYOTRANSMITTER This report shall not be reproduced except in full, without the written approval of World Standardization Certification & Testing CO., LTD. 2 TEST RESULT SUMMARY Standard Item Result FCC Part 15 Subpart C: Clause 15.249 Conducted emission Test PASS Radiation Emission Test PASS Band Edge Test PASS Note: 1. The test result judgment is decided by the limit of test standard 2. The information of measurement uncertainty is available upon the customer’s request. Report reference No.: WSCT11120846E-2 Issued: March 26, 2012 Revised: None TRF No.: FCC PART 15C-15.249/A0 Page 6 of 30…

Text truncated - open the document above for the full version.

CONDUCTED EMISSION TEST RADIATED EMISSION TEST BELOW 1GHz RADIATED EMISSION TEST ABOVE 1GHz RADIATED EMISSION TEST 9KHz-30MHz