G95-TVA200Media Touch

MEDIA TOUCH 2.0 TVA200 User Guide 1 Copyright Copyright © 2010 Technicolor. All rights reserved. Distribution and copying of this document, use and communication of its contents is not permitted without written authorization from Technicolor. The content of this document is furnished for informational use only, may be subject to change without notice, and should not be construed as a commitment by Technicolor. Technicolor assumes no responsibility or liability for any errors or inaccuracies that may appear in this document. TECHNICOLOR 1 rue Jeanne d’Arc 92443 Issy-Les-Moulineaux Cedex France http://www.technicolor.com Trademarks The following trademarks may be used in this document: ¾ DECT™ is a trademark of ETSI. ¾ Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. ¾ Ethernet™ is a trademark of Xerox Corporation. ¾ Wi-Fi®, WMM® and the Wi-Fi logo are registered trademarks of the Wi-Fi Alliance®. Wi-Fi CERTIFIED, Wi-Fi ZONE, Wi-Fi Protected Access, Wi-Fi Multimedia, Wi-Fi Protected Setup, WPA, WPA2 and their respective logos are trademarks of the Wi-Fi Alliance®. ¾ UPnP™ is a certification mark of the UPnP™ Implementers Corporation. ¾ DLNA® is a registered trademark, DLNA disc logo is a service mark, and DLNA Certified is a trademark of the Digital Living Network Alliance. Digital Living Network Alliance is a service mark of the Digital Living Network Alliance. ¾ Microsoft®, MS-DOS®, Windows®, Windows NT® and Windows Vista® are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. ¾ Apple® and Mac OS® are registered trademarks of Apple Computer, Incorporated, registered in the United States and other countries. ¾ UNIX® is a registered trademark of UNIX System Laboratories, Incorporated. ¾ Adobe®, the Adobe logo, Acrobat and Acrobat Reader are trademarks or registered trademarks of Adobe Systems, Incorporated, registered in the United States and/or other countries. Other brands and product names may be trademarks or registered trademarks of their respective holders. All other logos, trademarks and service marks are the property of their respective owners, where marked or not. Document Information Status: v1.1 (October 2010) Reference: Media touch 2.0 PRT UG 1.1.doc Short Title: MEDIA TOUCH 2.0 TVA200 User Guide Contents 2 1. About this User Guide ......................................................................................... 3 2. Your MEDIA TOUCH ........................................................................................... 4 3. Getting started ................................................................................................... 11 4. Trouble shooting ................................................................................................ 13 5. Technical specifications ..................................................................................... 14 About this User Guide 3 1. About this User Guide Used Symbols i A note provides additional information about a topic. ! A caution warns you about problems or specific precautions that need to be taken. Terminology Generally, the Technicolor MEDIA TOUCH will be referred to as Tablet in this User Guide. Typographical Conventions Following typographical convention is used throughout this manual: ¾ This sample text indicates a hyperlink to a Web site. Example: For more information, visit us at www.technicolor.com . ¾ This sample text indicates an internal cross-reference. Example: If you want to know more about guide, see “1 Introduction” on page 7”. ¾ This sample text indicates an important content-related word. Example: To enter the network, you must authenticate yourself. ¾ This sample text indicates a GUI element (commands on menus and buttons, dialog box elements, file names, paths and folders). Example: On the File menu, click Open to open a file. Documentation and software updates Technicolor continuously develops new solutions, but is also committed to improving its existing products. For more information on Technicolor's latest technological innovations, documents and software releases, visit us at www.technicolor.com . Your MEDIA TOUCH 4 2. Your MEDIA TOUCH Your box Your box contains the following items: Item Description 1 One User Guide One safety and regulatory notices booklet 2 One MEDIA TOUCH Tablet 3 One A/V cable 4 One AC-DC power adaptor 5 One lithium polymer rechargeable battery 6 One charging dock When one of these items is missing contact your local reseller. Before use, we recommend you to read carefully safety instructions and this user guide to get the most of your Tablet. As a first-time user, please follow the following steps to start up your Tablet. 2 4 65 1 3 Your MEDIA TOUCH 5 Your Tablet Item Description 1 Camera 2 Notification LED 3 Speaker 4 SEARCH key 5 HOME key 6 BACK key 7 MENU key 1 2 3 4 5 6 7 3 Your MEDIA TOUCH 6 Item Description 8 Volume UP key 9 Volume DOWN key 10 Microphone 11 Power ON/OFF key 12 Battery cover 13 Stand 14 Power connector on charging dock 15 Power connector on Tablet 16 Audio/Video connector 17 SD card connector 18 USB connector 14 13 12 11 10 98 18 17 16 15 Your MEDIA TOUCH 7 Item Description Function 19 Charging contact To charge the battery of the tablet when connected with the power adaptor plugged in the charging dock. 19 19 Your MEDIA TOUCH 8 Setting up your Tablet Connecting the battery For safety reasons, the rechargeable battery of the Tablet is disconnected during the shipment. Please follow the steps below to connect the battery. Make sure the Tablet is powered off before removing the sliding cover. 1. Remove the battery cover from the Tablet. 2. Connect the battery connector and insert the battery in its compartment. Your MEDIA TOUCH 9 ! Make sure the polarity of the battery match the polarity of the Tablet connector. ! For safety reason do not replace the battery by an incorrect type. If your battery is damaged, please contact your local reseller. 3. Sl…

Text truncated - open the document above for the full version.

Date: 04 Nov, 2010 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 To Whom It May Concern: The Technicolor USA, Inc., the undersigned, hereby authorizes Mr. Wu Xuewen from Shenzhen Morlab Communications Technology Co., Ltd., to act on the behalf of the Technicolor USA, Inc. solely in matters relating to the application for an FCC equipment authorization for FCC ID # G95-TVA201 including the signing of documents in connection with this Application. Necessary acts carried out by Shenzhen Morlab Communications Technology Co., Ltd. on our behalf of the Technicolor USA, Inc. in connection with the Application shall have the same effect as acts of the Technicolor USA, Inc. The Technicolor USA, Inc. also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Thank you for your attention to this matter. Yours Sincerely, Nancy Boettner / Manager

Date: 04 Nov, 2010 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 Re: Technicolor USA, Inc. FCC ID: G95-TVA200 FCC Part 15C Certification Confidentiality Request Gentlemen: This letter is to comply with 47 CFR 0.457 and 0.459 pertaining to confidentiality material. Technicolor USA, Inc. requests that the following documents regarding this submission for FCC ID: G95-TVA200 be kept confidential: Exhibit Type File Name Block Diagram G95-TVA200_Block Diagram.pdf Schematics G95-TVA200_Circuit Diagram.pdf Operational Description G95-TVA200_Operational Description.pdf Those documents contain detailed system and equipment description and related information about the product which Technicolor USA, Inc. considers to be confidential proprietary, a custom design and, otherwise, not releasable to the general public. Since this design is a basis form which future technological products will evolve, Technicolor USA, Inc. considers this information would be of benefit to its competitors, and that the disclosure of the information in these documents would give competitors an unfair advantage in the market. Nancy Boettner / Manager

External Photos 1. Front View of EUT 2. Back View of EUT 3. Side View of EUT

Label Label Location

Internal Photos

Report No.: SZ10080166S02 Page 2 of 119 Contents 1. GENERAL INFORMATION....................................................................................................4 1.1. Notes.........................................................................................................................................4 1.2. Organization item....................................................................................................................4 1.3. Conclusion................................................................................................................................4 2. TESTING LABORATORY.......................................................................................................5 2.1. Identification of the Responsible Testing Laboratory..........................................................5 2.2. Identification of the Responsible Testing Location..............................................................5 2.3. Accreditation Certificate........................................................................................................5 2.4. List of Test Equipments..........................................................................................................5 3. TECHNICAL INFORMATION ...............................................................................................6 3.1. Identification of Applicant......................................................................................................6 3.2. Identification of Manufacturer..............................................................................................6 3.3. Equipment Under Test (EUT)................................................................................................6 3.3.1. Photographs of the EUT..................................................................................................7 3.3.2. Identification of all used EUTs........................................................................................7 3.4. Applied Reference Documents...............................................................................................7 3.5. Device Category and SAR Limits..........................................................................................7 3.6. Test Environment/Conditions................................................................................................8 4. SPECIFIC ABSORPTION RATE (SAR) ................................................................................9 4.1 Introduction.................................................................................................................................9 4.2 SAR Definition.............................................................................................................................9 5. SAR MEASUREMENT SETUP .............................................................................................10 5.1. The Measurement System....................................................................................................10 5.2. Probe.......................................................................................................................................11 5.3. Phantom.................................................................................................................................13 5.4. Device Holder........................................................................................................................13 6. TISSUE SIMULATING LIQUIDS .........................................................................................14 7. UNCERTAINTY ASSESSMENT ...........................................................................................15 7.1. UNCERTAINTY EVALUATION FOR HANDSET SAR TEST......................................15 7.2. UNCERTAINTY FOR SYSTEM PERFORMANCE CHECK........................................16 Report No.: SZ10080166S02 Page 3 of 119 8. SAR MEASUREMENT EVALUATION ...............................................................................18 8.1. System Setup..........................................................................................................................18 8.2. Validation Results..................................................................................................................18 9. OPERATIONAL CONDITIONS DURING TEST ................................................................19 9.1. Informations on the testing..................................................................................................19 9.2. Body-worn Configurations...................................................................................................20 9.3. Measurement procedure.......................................................................................................20 9.4. Description of interpolation/extrapolation scheme............................................................21 10. TEST RESULTS LIST .............................................................................................................22 ANNEX A ACCREDITATION CERTIFICATE................................................25 ANNEX B PHOTOGRAPHS OF THE EUT......................................................26 ANNEX C GRAPH TEST RESULTS .................................................................28 Change History Issue Date Reason for change 1.0 Nov. 2, 2010 First edition Report No.: SZ10080166S02 Page 5 of 119 2. Testing Laboratory 2.1. Identification of the Responsible Testing Laboratory Company Name: Shenzhen Morlab Communications Technology Co., Ltd. Department: Morlab Laboratory Address: 3/F, Electronic Testing Building, Shahe Road, Nanshan District, Shenzhen, 518055 P. R. China Responsible Test Lab Manager: Mr. Shu Luan Telephone: +86 755 86130268 Facsimile: +86 755 86130218 2.2. Identification of the Responsible Testing Location Name: Shenzhen Morlab Communications Technology Co., Ltd. Morlab Laboratory Address: 3/F…

Text truncated - open the document above for the full version.

Ref: CR-280-1-08-SATB-A COMOSAR E-Field probe Calibration Report Page: 1/26 Issue: A Date: 2010/10/06 1 COMOSAR E-FIELD PROBE CALIBRATION REPORT Prepared By: LUC Jérôme, SATIMO Project Description: SAR TEST BENCH Prepared For (End User): Shenzhen Morlab Communication Technology This document is issued by SATIMO, in confidence and is not to be reproduced in whole or in part without the prior written permission. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or in part without the prior written permission of SATIMO. Ref: CR-280-1-08-SATB-A COMOSAR E-Field probe Calibration Report Page: 2/26 Issue: A Date: 2010/10/06 2 COMOSAR SEPT ISOTROPIC E-FIELD PROBE CALIBRATION REPORT DATE: 12/02/2009 REFERENCE: SN 37/08 EP80 OBJECT: COMOSAR SEPT ISOTROPIC E-FIELD PROBE MANUFACTURER: SATIMO SERIAL NUMBER: SN 37/08 EP80 CUSTOMER: Shenzhen Morlab Communication Technology CONTRACT: PF2130108b_SAR_Morlab DATE OF CALIBRATION: 24/09/20 10 WARRANTY: This Calibration certificate may not be reproduced other than in full. Calibration certificates without signature and seal are not valid. This documentation contains property information which is protected by copyright. All right are reserved. No part of this document may be photocopied, reproduced without the prior written agreement of SATIMO. SATIMO shall not be liable for errors contained herein or for incidental or consequential in connection with the furnishing, performance or use of this material. Warranty doesn’t apply to Normal wear, Normal tear, Improper use, Improper maintain, Improper installation. Date SAR TEAM MANAGER Ref: CR-280-1-08-SATB-A COMOSAR E-Field probe Calibration Report Page: 3/26 Issue: A Date: 2010/10/06 3 PRODUCT DESCRIPTION Frequency Range 100 MHz - 30 GHz Probe length 330 mm Length of one dipole 4.5 mm Maximum external diameter 8 mm Probe extremity diameter 6.5 mm Distance between dipoles/probe extremity < 2.7 mm Resistance of the three dipole (at the connector) Dipole 1: R1=1.4382 MΩ Dipole 2: R2=1.4894 MΩ Dipole 3: R3=1.4683 MΩ Connector (HIROSE series SR30) 6 wire male (Hirose SR30series) The probe could be checked by measuring the resistance of the three dipoles. CALIBRATION TEST EQUIPMENT TYPE IDENTIFICATION Calibration bench CALISAR Multimeter Keithley 2000 Ref: CR-280-1-08-SATB-A COMOSAR E-Field probe Calibration Report Page: 4/26 Issue: A Date: 2010/10/06 4 MEASUREMENT PROCEDURE Probe calibration is realized, in compliance with CENELEC EN 50361 and IEEE 1528 std, with CALISAR, Antennessa proprietary calibration system. The calibration is performed with the EN 50361 annexe technique using reference guide at the five frequencies. Where : P fw = Forward Power P bw = Backward Power a and b = Waveguide dimensions
= Skin depth Keithley configuration: Rate = Medium; Filter =ON; RDGS=10; FILTER TYPE =MOVING AVERAGE; RANGE AUTO After each calibration, a SAR measurement is performed on a validation dipole and compared with a NPL calibrated probe, to verify it. Ref: CR-280-1-08-SATB-A COMOSAR E-Field probe Calibration Report Page: 5/26 Issue: A Date: 2010/10/06 5 PROBE UNCERTAINTIES Ref: CR-280-1-08-SATB-A COMOSAR E-Field probe Calibration Report Page: 6/26 Issue: A Date: 2010/10/06 6 1. Calibration at 450.00 MHz A. Calibration parameters. Label GSM450 Epsilon 43.33 Sigma 0.84 S/m Temperature 21°C Antenna gain 2.03 dB Antenna S11 -10.50 dB Low limit detection (CW) 0.72 V/m (0.47 mW/kg) Calibration curves ei=f(V) (i=1,2,3) allow to obtain E-field value using the formula: 2 3 2 2 2 1 **EEEE= The following tables represent the calibration curves linearization by curve segment in CW signal. Ref: CR-280-1-08-SATB-A COMOSAR E-Field probe Calibration Report Page: 7/26 Issue: A Date: 2010/10/06 7 Calibration coefficients for the three dipoles in CW: v1 e1 v2 e2 v3 e3 0.584004 419.557857 -0.696059 435.622023 0.541191 412.830715 0.467833 339.207465 -0.556278 351.381991 0.469757 336.297240 0.376994 276.348283 -0.452232 288.647980 0.378826 274.224190 0.302778 224.954643 -0.359005 232.397390 0.305842 224.365698 0.241038 182.154071 -0.286978 188.889931 0.246562 183.825274 0.192549 148.484090 -0.230386 154.650994 0.195712 148.993075 0.154033 121.674762 -0.185412 127.378480 0.157543 122.783107 0.123397 100.276479 -0.147311 104.193802 0.125866 100.956090 0.099878 83.770361 -0.118637 86.660489 0.101471 84.063863 0.081165 70.553219 -0.095250 72.263937 0.082289 70.694342 0.065166 59.152028 -0.076788 60.795323 0.066427 59.538957 0.051916 49.592416 -0.061280 51.041514 0.053353 50.232492 0.041968 42.297602 -0.048746 43.022565 0.042906 42.675214 0.033724 36.126757 -0.039149 36.748110 0.034686 36.605243 0.021855 26.962568 -0.024798 27.024723 0.022272 27.149463 0.018405 23.975145 -0.020856 24.085809 0.018755 24.141334 0.015467 21.515985 -0.017534 21.515985 0.015767 21.615299 0.013018 19.309065 -0.014750 19.398191 0.013276 19.487731 0.010938 17.408496 -0.012392 17.529166 0.011157 17.569575 0.009022 15.586953 -0.010228 15.658899 0.009215 15.676938 0.007353 13.956010 -0.008328 13.988181 0.007484 14.020428 0.005989 12.466979 -0.006801 12.495719 0.006111 12.567858 0.004890 11.214019 -0.005573 11.265779 0.005003 11.330818 0.004019 10.133541 -0.004570 10.121882 0.004099 10.168601 0.003279 9.094132 -0.003739 9.157170 0.003352 9.125596 0.002660 8.095827 -0.003041 8.293946 0.002769 8.265350 0.002126 7.324219 -0.002453 7.366500 0.002188 7.358024 0.001685 6.565400 -0.001947 6.580536 0.001724 6.542765 0.001300 5.784440 -0.001511 5.718225 0.001334 5.757862 0.001123 5.245191 -0.001307 5.269400 0.001174 5.275471 0.000891 4.701768 -0.001057 4.723470 0.000924 4.728912 0.000704 4.209798 -0.000850 4.226839 0.000736 4.243862 0.000574 3.790376 -0.000689 3.791428 0.000603 3.830551 0.000457 3.396200 -0.000570 3.434303 0.000483 3.421852 0.000365 3.050686 -0.000463 3.078014 0.000389 3.079630 0.000292 2.745766 -0.000369 2.726866 0.000311 2.759206 0.000236 2.486639 -0.000312 2.489933 0.000246 2.460514 0.000…

Text truncated - open the document above for the full version.

Ref: CR-280-7-08-SATB-A COMOSAR Dipole 2450 MHz Calibration Report Page: 1/3 Issue: A Date: 2010/ 10/05 1 DIPOLE 2450 MHZ CALIBRATION REPORT Prepared By: LUC Jérôme, SATIMO Project Description: SAR TEST BENCH Prepared For (End User): Shenzhen Morlab Communication Technology This document is issued by SATIMO, in confidence and is not to be reproduced in whole or in part without the prior written permission. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or in part without the prior written permission of SATIMO. Ref: CR-280-7-08-SATB-A COMOSAR Dipole 2450 MHz Calibration Report Page: 2/3 Issue: A Date: 2010/ 10/05 2 D I POLE 2450 MHz CALIBRATION REPORT DATE: 14/09/2009 REFERENCE: SN 36/08 DIPJ103 OBJECT: COMOSAR IEEE REFERENCE DIPOLE MANUFACTURER: SATIMO SERIAL NUMBER: SN 36/08 DIPJ103 CUSTOMER: Shenzhen Morlab Communication Technology CONTRACT: PF2130108b_SAR_Morlab DATE OF CALIBRATION: 24/09/2010 WARRANTY: This Calibration certificate may not be reproduced other than in full. Calibration certificates without signature and seal are not valid. This documentation contains property information which is protected by copyright. All right are reserved. No part of this document may be photocopied, reproduced without the prior written agreement of SATIMO. SATIMO shall not be liable for errors contained herein or for incidental or consequential in connection with the furnishing, performance or use of this material. Warranty doesn’t apply to Normal wear, Normal tear, Improper use, Improper maintain, Improper installation. Date SAR TEAM MANAGER Ref: CR-280-7-08-SATB-A COMOSAR Dipole 2450 MHz Calibration Report Page: 3/3 Issue: A Date: 2010/ 10/05 3 P R ODUCT DESCRIPTION CALIBRATION TEST EQUIPMENT TYPE IDENTIFICATION Vector Network Analyzer HP8753D MEASUREMENT PROCEDURE We placed the dipole under the flat part of SAM phantom fill with 2450 MHz head liquid. -33,09 -40 -35 -30 -25 -20 -15 -10 -5 0 2,352,55 Frequency (GHz) S11 (dB) VSWR at 2450 MHz: -33.09 dB.

Report No.: SZ10080166E04 Page 2 of 70 TABLE OF CONTENTS 1. TEST CERTIFICATION ........................................................................................................... 4 2. GENERAL INFORMATION .................................................................................................... 5 2.1 EUT Description ......................................................................................................................... 5 2.2 Test Standards and Results ........................................................................................................ 6 2.3 Facilities and Accreditations ...................................................................................................... 7 2.3.1 Facilities .................................................................................................................................... 7 2.3.2 Test Environment Conditions .................................................................................................... 7 3. 47 CFR PART 15C REQUIREMENTS .................................................................................... 8 3.1 Peak Output Power .................................................................................................................... 8 3.1.1 Requirement .............................................................................................................................. 8 3.1.2 Test Description ........................................................................................................................ 8 3.1.3 Test Result ................................................................................................................................. 9 3.2 Bandwidth ................................................................................................................................. 10 3.2.1 Definition ................................................................................................................................ 10 3.2.2 Test Description ...................................................................................................................... 10 3.3 Conducted Spurious Emissions ............................................................................................... 16 3.3.1 Requirement ............................................................................................................................ 16 3.3.2 Test Description ...................................................................................................................... 16 3.3.3 Test Result ............................................................................................................................... 16 3.4 Power spectral density (PSD) .................................................................................................. 22 3.4.1 Requirement ............................................................................................................................ 22 3.4.2 Test Description ...................................................................................................................... 22 3.4.3 Test Result ............................................................................................................................... 22 3.5 Band Edge ................................................................................................................................. 28 3.5.1 Requirement ............................................................................................................................ 28 3.5.2 Test Description ...................................................................................................................... 28 3.5.3 Test Result ............................................................................................................................... 29 3.6 Conducted Emission ................................................................................................................. 36 3.6.1 Requirement ............................................................................................................................ 36 3.6.2 Test Description ...................................................................................................................... 36 Report No.: SZ10080166E04 Page 3 of 70 3.6.3 Test Result ............................................................................................................................... 37 3.7 Radiated Emission .................................................................................................................... 39 3.7.1 Requirement ............................................................................................................................ 39 3.7.2 Test Description ...................................................................................................................... 39 3.7.3 Test Result ............................................................................................................................... 41 Report No.: SZ10080166E04 Page 5 of 70 2. GENERAL INFORMATION 2.1 EUT Description EUT Type.....................: Media Touch Serial No. .....................: (n.a, marked #1 by test site) IMEI ............................: (n.a) Hardware Version ........: PEM3 Software Version .........: V006 Modulation Type ................... : DSSS, OFDM Frequency ............................. : 802.11b/g/n-20MHz: 2.412GHz - 2.462GHz 802.11n: 2.422GHz - 2.452GHz Power Supply........................ : Battery Brand Name: technicolor Model No.: GSP 065590 Serial No.: (n.a. marked #1 by test site) Capacitance: 3450mAh Rated Voltage: 3.7V Manufacturer: Sunwoda Electronic Co., Ltd Ancillary Equipments 1 ........ : AC Adapter (Charger for Battery) Brand Name: (n.a) Model Name: MU18-D150120-A1 Serial No.: (n.a. marked #1 by test site) Rated Input: 100- 240V , 0.6A, 50/60Hz Rated Output: 15V, 1.2A Manufa…

Text truncated - open the document above for the full version.

Test Setup Photos 1. CE 2. CSE 3. RE