GPO3002019BWireless Remote Controller

E-1 E ™ INSTRUCTIONS SAFETY WARNING: Remove all plastic fasteners and tags. These are part of the packaging and should be discarded. SAVE THESE INSTRUCTIONS – This manual contains important safety and operating instructions for power units. WARNING ELECTRIC PRODUCT. Keep away from children. As with all electrical products, precautions should be observed during handling and use to reduce the risk of electric shock. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. WARNING Strobe lights have been known to trigger seizures in people with photosensitive epilepsy. WARNING The light is very bright. Do not shine directly into eyes. IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING(THIS FURNISHING) WARNING: TO REDUCE THE RISK OF BURNS, FIRE, ELECTRIC SHOCK OR INJURY TO PERSONS ： READ AND FOLLOW ALL SAFETY INSTRUCTIONS. 1. Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails. 2. Do not let lamps rest on the supply cord or on any wire. 3. Do not close doors or windows on the product or extension cords as this may damage the wire insulation. 4. Do not cover the product with cloth, paper or any material not part of the product when in use. 5. Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products are used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation. 6. This seasonal use product is not intended for permanent installation or use. 7. Do not mount or place near gas or electric heaters, fireplace, candles or other similar sources of heat. 8. Unplug the product when leaving the house, when retiring for the night, or if left unattended. 9. This is an electric product-not a toy! To avoid risk of fire, burns, personal injury and electric shock it should not be played with or placed where small children can reach it. 10. Do not use this product for other than its intended use. 11. Do not hang ornaments or other objects from cord, wire, or light string. 12. This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit situation. If the fuse blows, unplug the product from the outlet. Also unplug any additional strings or products that may be attached to the product. Replace the fuse as per the user servicing instructions (follow product marking for proper fuse rating) and check the product.If the replacement fuse blows, a short-circuit may be present and the product should be discarded. 13. This product has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not use with an extension cord unless plug can be fully inserted. Do not alter or replace. 14. Read and follow all instructions that are on the product or provided with the product. CAUTION: To reduce the risk of fire and electric shock: 1. Do not install on trees having needles, leaves or branch coverings of metal or materials which look like metal. And. 2. Do not mount or support wires in a manner that can cut or damage wire insulation. E-2 SAVE THESE INSTRUCTIONS. ASSEMBLY INSTRUCTIONS 1. Gently remove contents from packaging and lay out in a clear area. 2. Push the ball end of “A” through the projection ring and base. Tighten ring and adjust the angle of Projection™. (See Illustration 1) and tighten screw B. 3. Get together the Tripod Stake for outdoor using, and separate the Tripod Stake for indoor using. (See Illustration 2). illustration 1 illustration 2 4. Plug power cord into standard wall socket. (See Illustration 3) 5. Unplug when not in use. USER SERVICING INSTRUCTIONS Fuse Replacement (Fuse: 2pcs) WARNING: Risk of Fire: Replace only with same size and type of fuse. WARNING: Risk of Fire: Do not replace the attachment plug. Contains a safety device (fuse) that should not be removed. Discard product if attachment plug is damaged. 1. Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on the cord. illustration 2 Working Fuse Replace Fuse 2. Open fuse cover. Slide open the fuse access cover on top of the attachment plug towards blades. (See illustration) 3. Remove fuse carefully. 4. Replace fuse only with 5 Amp Max, 125 Volt fuse (provided with product). 5. Close the fuse cover. Slide closed the fuse access cover on top of the attachment plug. OPERATE THE REMOTE: 1. Remove the remote from its packing box. 2. Use the remote to control the effect. (Fig.1) 3. The remote has four buttons (Fig. 2). Fig. 1 STATIC/MOTION EFFECT COLORS Fig. 2 ON/OFF A B Ground E-3 a. ON/OFF – Press to turn the set ON; press again to turn the set OFF. b. COLORS – Change the light color to any on this list by pressing the button on remote until you reach the desired color. c. EFFECT - Change the light effect by pressing the button on the remote until you reach the desired light effect. d. STATIC/MOTION - Press to turn the set to STATIC mode. Press again to turn the set to MOTION mode. NOTE: The LightShow TM setting defaults to red while warming up. It will change to multicolored light after a few seconds. To select the red-only setting, cycle through the settings using the remote control. See the effects chart for more information. NOTES: 1. When using the remote to turn ON your set, there may be up to a 2 seconds delay before the light pattern starts working. 2. To change light patterns it is recommended to wait 2 seconds each time after pressing the Function button until you reach the desired pattern. 3. If for any reason the signal from the remote (transmitter) to the control box (receiver) hangs up, please turn off and then restart …

Text truncated - open the document above for the full version.

GEMMY INDUSTRIES (HK)LIMITED BVI 2024-03-27 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for (GPO3002019B) [GEMMY INDUSTRIES (HK)LIMITED BVI] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Jiankuai Li GEMMY INDUSTRIES (HK)LIMITED BVI 2024-03-27 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for (GPO3002019) [GEMMY INDUSTRIES (HK)LIMITED BVI] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Jiankuai Li

GEMMY INDUSTRIES (HK)LIMITED BVI Attestation Statements 2024-03-27 TO: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046, USA RE: Attestation Statements Part 2.911(d)(7) request for (GPO3002019B) (GEMMY INDUSTRIES (HK)LIMITED BVI), the undersigned, hereby authorize (Gemmy Industries Corporation) to act as our designated U.S. agent for service of process, (GEMMY INDUSTRIES (HK)LIMITED BVI) accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. (Gemmy Industries Corporation]) accepts the responsibility to act as designated U.S. agent for service of process. Applicant Information： Company name: GEMMY INDUSTRIES (HK)LIMITED BVI Contact Name: Stan Zhang Address: Unit No.301 on 3rd Floor, East Ocean Centre, No.98 Kowloon Hong Kong Telephone No: +86-0755-29932188 Email: [email protected] Signature [Stan Zhang] U.S. Agent Information: Company Name: Gemmy Industries Corporation] Address: 117 WRANGLER DRIVE SUITE 100 COPPELL, TX 75019, USA FRN: 0033597543 Contact Name: David Mclntyre Telephone No: (927)538 4200 Email: [email protected] Signature [David Mclntyre]

GEMMY INDUSTRIES (HK)LIMITED BVI 2024-03-27 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR (Wireless Remote Controller /3002019 # GPO3002019B #) To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the • Schematics • Block diagram • Operation description required to be submitted with this application be permanently withheld from public review. These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors.. Please contact me if there is any information you may need. Sincerely, Name: Jiankuai Li Signature:

GEMMY INDUSTRIES (HK)LIMITED BVI 2024-03-27 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize (Shenzhen STS Test Services Co., Ltd.) to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Name: Jiankuai Li Signature:

Page 1 of 3 Report No.: STS2403086 APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS Model: 3002019 Photo 1 Photo 2 Page 2 of 3 Report No.: STS2403086 Photo 3 Photo 4 Page 3 of 3 Report No.: STS2403086 Photo 5 Photo 6

Label B

Page 1 of 3 Report No.: STS2403086 APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS Model: 3002019 Photo 1 Photo 2 2.4G Antenna Page 2 of 3 Report No.: STS2403086 Photo 3 Photo 4 Page 3 of 3 Report No.: STS2403086 Photo 5

The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the ShenZhen STS Test Services Co., Ltd. Radio Test Report Report No.: STS2403086H01 Issued for GEMMY INDUSTRIES (HK)LIMITED BVI Unit No.301 on 3rd Floor, East Ocean Centre, No.98 Kowloon Hong Kong Product Name: Wireless Remote Controller Brand Name: Gemmy Model Name: 3002019 Series Model(s): N/A FCC ID: GPO3002019B Test Standards: FCC 47CFR §2.1093 Page 2 of 11 Report No.: STS2403086H01 TEST REPORT Applicant’s Name ................. : GEMMY INDUSTRIES (HK)LIMITED BVI Address .................................. : Unit No.301 on 3rd Floor, East Ocean Centre, No.98 Kowloon Hong Kong Manufacturer's Name ........... : GEMMY INDUSTRIES (HK)LIMITED BVI Address .................................. : Unit No.301 on 3rd Floor, East Ocean Centre, No.98 Kowloon Hong Kong Factory 1 ............................... : ZAIXING ELECTRONIC (SHENZHEN) CO., LTD. Address .................................. : No. 1 and 3, 1st Road Yang Yong, Tangxiayong Community, Yanluo Street, Bao'an District, Shenzhen City, Guangdong Province, China Factory 2 ............................... : YUQI ELECTRONIC (HUAIBEI) CO., LTD. Address .................................. : 32 fengguan road, xiangshan district, Huaibei city, Anhui province, China Factory 3 ............................... : XINGYU ELECTRONIC (HUIZHOU) CO., LTD. Address .................................. : Hengjiangwei Village, Yihe Town, Boluo County, Huizhou City, Guangdong Province, China Factory 4 ............................... : QIYANG TECHNOLOGY (HUAIBEI) CO., LTD. Address .................................. : 32 Fengguan road, xiangshan district, Huaibei city, Anhui province, China Factory 5 ............................... : YUAN HONG COMPANY LIMITED Address .................................. : No. 3 Street, My Xuan A Industrial Zone, My Xuan Ward, Phu My Town, Ba Ria-Vung Tau province, Vietnam Factory 6 ............................... : DYNATECH LIGHTING TECHNOLOGY CO., LTD. Address .................................. : GIGA RESOURCE SPECIAL ECONOMIC ZONE, NATIONAL ROAD NO.1, DERM POU VILLAGE, KANDIENG REAY COMMUNE, SVAY TEAP DISTRICT, SVAY RIENG PROVINCE, CAMBODIA Product Description Product Name ........................ : Wireless Remote Controller Brand Name ........................... : Gemmy Model Name ........................... : 3002019 Series Model(s) ...................... : N/A Page 3 of 11 Report No.: STS2403086H01 Test Standards ..................... : FCC 47CFR §2.1093 447498 D04 Interim General RF Exposure Guidance v01 The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the ShenZhen STS Test Services Co., Ltd. Date of Test ........................................... : Date of receipt of test item ...................... : 15 Mar. 2024 Date (s) of performance of tests ............. : 15 Mar. 2024 ~ 20 Mar. 2024 Date of Issue .......................................... : 20 Mar. 2024 Test Result .............................................. : Pass Testing Engineer : (Aaron Bu) Technical Manager : (Chris Chen) Authorized Signatory : (Bovey Yang) Page 4 of 11 Report No.: STS2403086H01 TABLE OF CONTENTS 1. GENERAL INFORMATION 6 1.1 GENERAL DESCRIPTION OF THE EUT 6 1.2 TEST FACTORY 7 2. FCC 47CFR §2.1093 REQUIREMENT 8 2.1 TEST STANDARDS 8 2.2 LIMIT 8 2.3 TEST RESULT 11 Page 5 of 11 Report No.: STS2403086H01 Revision History Rev. Issue Date Report No. Effect Page Contents 00 20 Mar. 2024 STS2403086H01 ALL Initial Issue Page 6 of 11 Report No.: STS2403086H01 1. GENERAL INFORMATION 1.1 GENERAL DESCRIPTION OF THE EUT Product Name Wireless Remote Controller Brand Name Gemmy Model Name 3002019 Series Model(s) N/A Model Difference N/A Product Description The EUT is Wireless Remote Controller Operation Frequency: 2407MHz, 2445MHz, 2477MHz Modulation Type: GFSK Antenna gain: 0dBi Antenna Designation: Monopole antenna Power Rating Input: DC 3V Hardware Version 116487-USA (V2) Software Version 116487-USA (V2) Page 7 of 11 Report No.: STS2403086H01 1.2 TEST FACTORY SHENZHEN STS TEST SERVICES CO., LTD Add. : 101, Building B, Zhuoke Science Park, No.190 Chongqing Road, ZhanChengShequ, Fuhai Sub-District, Bao’an District, Shenzhen, Guang Dong, China FCC test Firm Registration Number: 625569 IC test Firm Registration Number: 12108A A2LA Certificate No.: 4338.01 Page 8 of 11 Report No.: STS2403086H01 2. FCC 47CFR §2.1093 REQUIREMENT 2.1 TEST STANDARDS Follow the maximum permissible exposure (MPE) limits specified in 447498 D04 Interim General Radio Frequency Exposure Guidelines v01. The gain of the antenna used in the product was extracted from the supplied antenna data sheet and the maximum total power input to the antenna was also measured. Calculate the distance from the product to the MPE limit by the formula. 2.2 LIMIT For single RF sources (i.e., any single fixed RF source, mobile device, or portable device, as defined in paragraph (b)(2) of this section): A single RF source is exempt if: (A) The available maximum time-averaged power is no more than 1 mW, regardless of separation distance. This exemption may not be used in conjunction with other exemption criteria other than those in paragraph (b)(3)(ii)(A) of Part 1.1307. Medical implant devices may only use this exemption and that in paragraph (b)(3)(ii)(A); (B) Or the available maximum time-averaged power or effective radiated power (ERP), whichever is greater, is less than or equal to the threshold Pth (mW) described in the following formula. This method shall only be used at separation distances (cm) from 0.5 centimeters to 40 centimeters and at frequencies from 0.3 GHz to 6 GHz (inclusive). Pth is given by: Page 9 of 11 Report No.: STS2403086H01 (C) Or using below table and the minimum separation distance (R in meters) from the body of a n…

Text truncated - open the document above for the full version.

$QWHQQDGHVFULEH $QWHQQDGHVFULEH $QWHQQDSODWH 0DNHQDPHPRGHOQDPH $QWHQQDJDLQG%L )UHTXHQF\UDQJH &RQQHFWRUW\SHGLUHFW /RFDWLRQ RI PHDUHPHQW*FRPSDQ\QDPH+ ([WHUQDOYLHZGUDZLQJ 3LFWXUHRIDQWHQQD PCB ANT(Monopole) 2400-2500MHz 2002017 GEMMY INDUSTRIES (HK)LIMITED BVI $QWHQQD5DGLDWLRQ3DWWHUQ 5DGLDWLRQSDWWHUQ#*+= 7RWDO$YHUDJH*DLQGEL  3KL *DLQ  5DGLDWLRQSDWWHUQ#*+= 7RWDO$YHUDJH*DLQGEL  3KL *DLQ  5DGLDWLRQSDWWHUQ#*+= 7RWDO$YHUDJH*DLQ  3KL *DLQ  0dbi

The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. Radio Test Report Report No.:STS2403086W01 Issued for GEMMY INDUSTRIES (HK)LIMITED BVI Unit No.301 on 3rd Floor, East Ocean Centre, No.98 Kowloon Hong Kong Product Name: Wireless Remote Controller Brand Name: Gemmy Model Name: 3002019 Series Model(s): N/A FCC ID: GPO3002019B Test Standards: FCC Part 15.249 Page 2 of 40 Report No.: STS2403086W01 TEST REPORT Applicant’s Name ................ : GEMMY INDUSTRIES (HK)LIMITED BVI Address ................................. : Unit No.301 on 3rd Floor, East Ocean Centre, No.98 Kowloon Hong Kong Manufacturer's Name .......... : GEMMY INDUSTRIES (HK)LIMITED BVI Address ................................. : Unit No.301 on 3rd Floor, East Ocean Centre, No.98 Kowloon Hong Kong Factory 1 .............................. : ZAIXING ELECTRONIC (SHENZHEN) CO., LTD. Address ................................. : No. 1 and 3, 1st Road Yang Yong, Tangxiayong Community, Yanluo Street, Bao'an District, Shenzhen City, Guangdong Province, China Factory 2 .............................. : YUQI ELECTRONIC (HUAIBEI) CO., LTD. Address ................................. : 32 fengguan road, xiangshan district, Huaibei city, Anhui province, China Factory 3 .............................. : XINGYU ELECTRONIC (HUIZHOU) CO., LTD. Address ................................. : Hengjiangwei Village, Yihe Town, Boluo County, Huizhou City, Guangdong Province, China Factory 4 .............................. : QIYANG TECHNOLOGY (HUAIBEI) CO., LTD. Address ................................. : 32 Fengguan road, xiangshan district, Huaibei city, Anhui province, China Factory 5 .............................. : YUAN HONG COMPANY LIMITED Address ................................. : No. 3 Street, My Xuan A Industrial Zone, My Xuan Ward, Phu My Town, Ba Ria-Vung Tau province, Vietnam Factory 6 .............................. : DYNATECH LIGHTING TECHNOLOGY CO., LTD. Address ................................. : GIGA RESOURCE SPECIAL ECONOMIC ZONE, NATIONAL ROAD NO.1, DERM POU VILLAGE, KANDIENG REAY COMMUNE, SVAY TEAP DISTRICT, SVAY RIENG PROVINCE, CAMBODIA Product Description Product Name ....................... : Wireless Remote Controller Brand Name ........................ : Gemmy Model Name .......................... : 3002019 Series Model(s) ..................... : N/A Page 3 of 40 Report No.: STS2403086W01 Test Standards ..................... : FCC Part 15.249 Test Procedure ...................... : ANSI C63.10-2013 This device described above has been tested by STS, the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. Date of Test ........................... : Date of receipt of test item ..... : 15 Mar. 2024 Date of performance of tests . : 15 Mar. 2024 ~ 20 Mar. 2024 Date of Issue ......................... : 20 Mar. 2024 Test Result ............................ : Pass Testing Engineer : (Chris Chen) Technical Manager : (Chris Chen) Authorized Signatory : (Bovey Yang) Page 4 of 40 Report No.: STS2403086W01 Table of Contents Page 1. SUMMARY OF TEST RESULTS 6 1.1 TEST FACTORY 7 1.2 MEASUREMENT UNCERTAINTY 7 2. GENERAL INFORMATION 8 2.1 GENERAL DESCRIPTION OF THE EUT 8 2.2 DESCRIPTION OF THE TEST MODES 10 2.3 TEST SOFTWARE AND POWER LEVEL 10 2.4 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 10 2.5 DESCRIPTION OF NECESSARY ACCESSORIES AND SUPPORT UNITS 11 2.6 EQUIPMENTS LIST FOR ALL TEST ITEMS 12 3. EMC EMISSION TEST 13 3.1 CONDUCTED EMISSION MEASUREMENT 13 3.2 RADIATED EMISSION MEASUREMENT 16 4.1 TEST PROCEDURE 36 4.2 TEST SETUP 36 4.3 EUT OPERATION CONDITIONS 36 4.4 TEST RESULTS 37 5. ANTENNA REQUIREMENT 39 5.1 STANDARD REQUIREMENT 39 5.2 EUT ANTENNA 39 APPENDIX- PHOTOS OF TEST SETUP 40 Page 5 of 40 Report No.: STS2403086W01 Revision History Rev. Issue Date Report No. Effect Page Contents 00 20 Mar. 2024 STS2403086W01 ALL Initial Issue Page 6 of 40 Report No.: STS2403086W01 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: FCC Part 15.249 , Subpart C Standard Section Test Item Judgment Remark 15.207 Conducted Emission N/A 15.203 Antenna Requirement Pass 15.249 Radiated Spurious Emission Pass 15.249 Radiated Band Edge Emission Pass 15.249 Field Strength of fundamental Pass 15.215(c) 20dB Bandwidth Pass NOTE: (1) ‘N/A’ denotes test is not applicable in this Test Report. (2) All tests are according to ANSI C63.10-2013. Page 7 of 40 Report No.: STS2403086W01 1.1 TEST FACTORY SHENZHEN STS TEST SERVICES CO., LTD Add. :101, Building B, Zhuoke Science Park, No.190 Chongqing Road, ZhanChengShequ, Fuhai Sub-District, Bao’an District, Shenzhen, Guang Dong, China FCC test Firm Registration Number: 625569 IC test Firm Registration Number: 12108A A2LA Certificate No.: 4338.01 1.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ± U, where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2, providing a level of confidence of approximately 95 %. No. Item Uncertainty 1 RF output power, conducted ±0.755dB 2 Unwanted Emissions, conducted ±2.874dB 3 All emissions, radiated 9K-30MHz ±3.80dB 4 All emissions, radiated 30M-1GHz ±4.18dB 5 All emissions, radiated 1G-6GHz ±4.90dB 6 All emissions, radiated>6G ±5.24dB 7 Conducted Emission (9KHz-150KHz) ±2.19dB 8 Conducted Emission (150KHz-30MHz) ±2.53dB 9 Occupied Channel Bandwidth ±3.5% 10 Power Spectral Density, conducted ±1.245dB 11 Duty Cycle ±3.2% Page 8 of 40 Report No.: STS2403086W01 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF THE EUT Product Name …

Text truncated - open the document above for the full version.

Page 1 of 1 FCC ID: GPO3002019B DXX Setup photo Model Number: 3002019 DXX radiation L DXX radiation H