GPO883104BOrchestra of Lights-Lightshow Projection

E-1 SAFETY WARNING: Remove all plastic fasteners and tags. These are part of the packaging and should be discarded. SAVE THESE INSTRUCTIONS – This manual contains important safety and operating instructions for power units. WARNING ELECTRIC PRODUCT. Keep away from children. As with all electrical products, precautions should be observed during handling and use to reduce the risk of electric shock. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. WARNING Strobe lights have been known to trigger seizures in people with photosensitive epilepsy. WARNING The light is very bright. Do not shine directly into eyes. IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING(THIS FURNISHING) WARNING: TO REDUCE THE RISK OF BURNS, FIRE, ELECTRIC SHOCK OR INJURY TO PERSONS ： READ AND FOLLOW ALL SAFETY INSTRUCTIONS. 1. Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails. 2. Do not let lamps rest on the supply cord or on any wire. 3. Do not close doors or windows on the product or extension cords as this may damage the wire insulation. 4. Do not cover the product with cloth, paper or any material not part of the product when in use. 5. Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products are used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation. 6. This seasonal use product is not intended for permanent installation or use. 7. Do not mount or place near gas or electric heaters, fireplace, candles or other similar sources of heat. 8. Unplug the product when leaving the house, when retiring for the night, or if left unattended. 9. This is an electric product-not a toy! To avoid risk of fire, burns, personal injury and electric shock it should not be played with or placed where small children can reach it. 10. Do not use this product for other than its intended use. 11. Do not hang ornaments or other objects from cord, wire, or light string. 12. This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit situation. If the fuse blows, unplug the product from the outlet. Also unplug any additional strings or products that may be attached to the product. Replace the fuse as per the user servicing instructions (follow product marking for proper fuse rating) and check the product.If the replacement fuse blows, a short-circuit may be present and the product should be discarded. 13. This product has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not use with an extension cord unless plug can be fully inserted. Do not alter or replace. 14. Read and follow all instructions that are on the product or provided with the product. E ORCHESTRA OF LIGHTS TM E-2 CAUTION: To reduce the risk of fire and electric shock: 1. Do not install on trees having needles, leaves or branch coverings of metal or materials which look like metal. 2. Do not mount or support wires in a manner that can cut or damage wire insulation. SAVE THESE INSTRUCTIONS. TECHNICAL SPECIFICATIONS. ASSEMBLY INSTRUCTIONS 1. Gently remove contents from packaging and lay out in a clear area. 2. Push the ball end of “A” through the projection ring and base.Tighten ring and adjust the angle of Projection™. (See Illustration1) and tighten screw B. 3. Use convertible tripod stake for indoor or outdoor use. Collapse legs into single stake for outdoor use. Expand stake legs into tripod for indoor use. 4. Plug power cord into standard wall socket. (See illustration 3) 5. Unplug when not in use. BUTTON INSTRUCTIONS 1. BLUETOOTH - Press to turn ON/OFF bluetooth mode. 2. INCREASE THE VOLUME - Make the music louder. 3. REDUCE THE VOLUME - Make the music quieter. 4. PLAY/PAUSE - Play or pause the music. 5. PREVIOUS SONG - Play the previous song. 6. NEXT SONG - Play the next song. USER SERVICING INSTRUCTIONS Fuse Replacement (Fuse: 2pcs) WARNING: Risk of Fire: Replace only with same size and type of fuse. WARNING: Risk of Fire: Do not replace the attachment plug. Contains a safety device (fuse) that should not be removed. Discard product if attachment plug is damaged. illustration 1 illustration 3 Working Fuse Replace Fuse B A B A B A illustration 2 Projection light3pcs Stake3pcs Extra fuse1pc Ring3pcs E-3 1. Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on the cord. 2. Open fuse cover. Slide open the fuse access cover on top of the attachment plug towards blades. (See illustration) 3. Remove fuse carefully. 4. Replace fuse only with 5 Amp Max, 125 Volt fuse (provided with product) 5. Close the fuse cover. Slide closed the fuse access cover on top of the attachment plug. OPERATING INFORMATION This product was designed for indoor and outdoor use. Do not shake the device. Avoid brute force when operating the device. Keep away from direct and excessive heat sources. Do not permit operation by unqualified persons. Damages are usually the result of unprofessional operation. Never use solvents or aggressive detergents in order to clean the device. Rather use a soft and damp cloth. Please use the original packaging if the device is to be transported. Unauthorized modifications on the device are unacceptable due to safety reasons. If this device is operated in any way different from the ways described in this manual, the product may suffer damages and the guarantee becomes void. OPERATION - Insert the plug into socket. - Adjust staked projector to display in desired location. - Unplug when not in use. Use caution with power cord. WARNING •…

Text truncated - open the document above for the full version.

GEMMY INDUSTRIES (HK)LIMITED BVI 2024.05.14 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for GPO883104B [GEMMY INDUSTRIES (HK)LIMITED BVI] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Stan Zhang GEMMY INDUSTRIES (HK)LIMITED BVI 2024.05.13 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for GPO883104B [GEMMY INDUSTRIES (HK)LIMITED BVI] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Stan Zhang

Attestation Statements 2024.05.13 TO: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046, USA RE: Attestation Statements Part 2.911(d)(7) request for GPO883104B (GEMMY INDUSTRIES (HK)LIMITED BVI), the undersigned, hereby authorize (Gemmy Industries Corporation) to act as our designated U.S. agent for service of process, (GEMMY INDUSTRIES (HK)LIMITED BVI) accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. (Gemmy Industries Corporation) accepts the responsibility to act as designated U.S. agent for service of process. Applicant Information： Company name: GEMMY INDUSTRIES (HK)LIMITED BVI Contact Name: Stan Zhang Address: Unit No.301 on 3rd Floor, East Ocean Centre, No.98 Kowloon Hong Kong Telephone No: +86-0755-29932188 Email: [email protected] Signature U.S. Agent Information: Company Name: Gemmy Industries Corporation] Address: 117 WRANGLER DRIVE SUITE 100 COPPELL, TX 75019, USA FRN: 0033597543 Contact Name: David Mclntyre Telephone No: (927)538 4200 Email: [email protected] Signature

GEMMY INDUSTRIES (HK)LIMITED BVI 2024-05-14 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR (Orchestra of Lights-Lightshow Projection / 883104 # AND GPO883104B #) To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the • Schematics • Block diagram • Operation description required to be submitted with this application be permanently withheld from public review. These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Please contact me if there is any information you may need. Sincerely, Name: Stan Zhang

GEMMY INDUSTRIES (HK)LIMITED BVI 2024-05-14 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize (Shenzhen STS Test Services Co., Ltd) to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Name: Stan Zhang

Page 1 of 3 Report No.: STS2403107 APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS Model:883104 Photo 1 Photo 2 Page 2 of 3 Report No.: STS2403107 Photo 3 Photo 4 Page 3 of 3 Report No.: STS2403107 Photo 5 Photo 6

Label 40mm 35mm

Page 1 of 7 Report No.: STS2404107 APPENDIX-PHOTOGRAPHS OF EUT CONSTRUCTIONAL DETAILS Model: 883104 Photo 1 Photo 2 Page 2 of 7 Report No.: STS2404107 Photo 3 Photo 4 Page 3 of 7 Report No.: STS2404107 Photo 5 Photo 6 Page 4 of 7 Report No.: STS2404107 Photo 7 Photo 8 Page 5 of 7 Report No.: STS2404107 Photo 9 Photo 10 Page 6 of 7 Report No.: STS2404107 Photo 12 Photo 11 2.4G SRD ANTENNA Page 7 of 7 Report No.: STS2404107 Photo 13 BT ANTENNA

The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. Radio Test Report Report No.: STS2403107H01 Issued for GEMMY INDUSTRIES (HK)LIMITED BVI Unit No.301 on 3rd Floor, East Ocean Centre, No.98, Kowloon, Hong Kong Product Name: Orchestra of Lights-Lightshow Projection Brand Name: N/A Model Name: 883104 Series Model(s): N/A FCC ID: GPO883104B Test Standards: FCC 47CFR §2.1091 Page 2 of 11 Report No.: STS2403107H01 TEST REPORT Applicant’s Name ................. : GEMMY INDUSTRIES (HK)LIMITED BVI Address ................................. : Unit No.301 on 3rd Floor, East Ocean Centre, No.98, Kowloon, Hong Kong Manufacturer's Name ........... : GEMMY INDUSTRIES (HK)LIMITED BVI Address ................................. : Unit No.301 on 3rd Floor, East Ocean Centre, No.98, Kowloon, Hong Kong Factory1 .................................. ZAIXING ELECTRONIC (SHENZHEN) CO., LTD Address ................................. : No. 1 and 3, 1st Road Yang Yong, Tangxiayong Community, Yanluo Street, Bao'an District, Shenzhen City, Guangdong Province, China Factory2 .................................. YUQI ELECTRONIC (HUAIBEI) CO., LTD Address .................................. 32 fengguan road, xiangshan district, Huaibei city, Anhui province, China Factory3 .................................. XINGYU ELECTRONIC (HUIZHOU) CO., LTD Address .................................. Hengjiangwei Village, Yihe Town, Boluo County, Huizhou City, Guangdong Province, China Factory4 .................................. QIYANG TECHNOLOGY (HUAIBEI) CO., LTD Address .................................. 32 Fengguan road, xiangshan district, Huaibei city, Anhui province Factory5 .................................. YUAN HONG COMPANY LIMITED Address .................................. No. 3 Street, My Xuan A Industrial Zone, My Xuan Ward, Phu My Town, Ba Ria-Vung Tau province, Vietnam Factory6 .................................. DYNATECH LIGHTING TECHNOLOGY CO., LTD Address .................................. GIGA RESOURCE SPECIAL ECONOMIC ZONE, NATIONAL ROAD NO.1, DERM POU VILLAGE, KANDIENG REAY COMMUNE, SVAY TEAP DISTRICT, SVAY RIENG PROVINCE, CAMBODIA Product Description Product Name ........................ : Orchestra of Lights-Lightshow Projection Brand ................................... : N/A Model Number ....................... : .. : 883104 Series Model(s) ...................... : N/A Standards ............................. : FCC 47CFR §2.1091 447498 D04 Interim General RF Exposure Guidance v01 The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. Date of Test ........................................... : Date of receipt of test item ...................... : 11 Mar. 2024 Date (s) of performance of tests ............. : 11 Mar. 2024 ~ 30 Apr. 2024 Date of Issue .......................................... : 30 Apr. 2024 Test Result .............................................. : Pass Page 3 of 11 Report No.: STS2403107H01 Testing Engineer : (Aaron Bu) Technical Manager : (Chris Chen) Authorized Signatory : (Bovey Yang) Page 4 of 11 Report No.: STS2403107H01 TABLE OF CONTENTS 1. GENERAL INFORMATION 6 1.1 GENERAL DESCRIPTION OF THE EUT 6 1.2 TEST FACTORY 7 2. FCC 47CFR §2.1091 REQUIREMENT 8 2.1 TEST STANDARDS 8 2.2 LIMIT 8 2.3 TEST RESULT 11 Page 5 of 11 Report No.: STS2403107H01 Revision History Rev. Issue Date Report No. Effect Page Contents 00 30 Apr. 2024 STS2403107H01 ALL Initial Issue Page 6 of 11 Report No.: STS2403107H01 1. GENERAL INFORMATION 1.1 GENERAL DESCRIPTION OF THE EUT Product Name Orchestra of Lights-Lightshow Projection Brand N/A Model Number 883104 Series Model(s) N/A Model Difference N/A Product Description The EUT is Orchestra of Lights-Lightshow Projection Operation Frequency: 2.4G: 2420MHz,2443MHz,2465MHz Bluetooth: 2402 – 2480 MHz Modulation Type: 2.4G: GFSK BT: GFSK(1Mbps), π/4-DQPSK(2Mbps), 8DPSK(3Mbps) Antenna gain: 2.4G: 3 dBi BT: 3 dBi Antenna Designation: PCB Antenna Rating Input: AC 120V Hardware version number 883104-USA（V2） Software version number 883104-USA（V2） Page 7 of 11 Report No.: STS2403107H01 1.2 TEST FACTORY SHENZHEN STS TEST SERVICES CO., LTD Add. : 101, Building B, Zhuoke Science Park, No.190 Chongqing Road, ZhanChengShequ, Fuhai Sub-District, Bao’an District, Shenzhen, Guang Dong, China FCC test Firm Registration Number: 625569 IC test Firm Registration Number: 12108A A2LA Certificate No.: 4338.01 Page 8 of 11 Report No.: STS2403107H01 2. FCC 47CFR §2.1091 REQUIREMENT 2.1 TEST STANDARDS Follow the maximum permissible exposure (MPE) limits specified in 447498 D04 Interim General Radio Frequency Exposure Guidelines v01. The gain of the antenna used in the product was extracted from the supplied antenna data sheet and the maximum total power input to the antenna was also measured. Calculate the distance from the product to the MPE limit by the formula. 2.2 LIMIT For single RF sources (i.e., any single fixed RF source, mobile device, or portable device, as defined in paragraph (b)(2) of this section): A single RF source is exempt if: (A) The available maximum time-averaged power is no more than 1 mW, regardless of separation distance. This exemption may not be used in conjunction with other exemption criteria other than those in paragraph (b)(3)(ii)(A) of Part 1.1307. Medical implant devices may only use this exemption and that in paragraph (b)(3)(ii)(A); (B) Or the available maximum time-averaged power or effective radiated power (ERP), whichever is greater, is less than or equal to the threshold Pth (mW) described in the following formula. This method shall only be used at separation distances (cm) from 0.5 centimeters to 40 centimeters and at frequencies from 0.3 GHz to 6 GHz (inclusive). Pth is given …

Text truncated - open the document above for the full version.

电器性能指标ElectricalSpecifications 频率范围 2400-2500MHZ 电压驻波比≤1.8VSWR≤1.8 增益≤2.5DBIGAIN≤2.5DBI 辐射方式全向RadiationOMNI 极化方式线极化PolarizatinLINEAR 输入阻抗50ΩInputImpedance50Ω 机械性能指标MechanicalSpecifications 接口形式IPEX-1InputconnectorIPEX-1 天线材质PCBAntennamateriaPCB 工作温度-30°C~+80°C Working Temperature -30°C~+80°C 工作湿度40~85%WorkingHumidity40~85% 3 dBi 3 dBi Antenna size diagram Antenna standing wave pattern antenna efficiency Antenna effeciency Antenna pattern Antenna size diagram

The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. Radio Test Report Report No.:STS2403107W02 Issued for GEMMY INDUSTRIES (HK)LIMITED BVI Unit No.301 on 3rd Floor, East Ocean Centre, No.98, Kowloon, Hong Kong Product Name: Orchestra of Lights-Lightshow Projection Brand Name: N/A Model Name: 883104 Series Model(s): N/A FCC ID: GPO883104B Test Standards: FCC Part15.247 Page 2 of 96 Report No.: STS2403107W02 TEST REPORT Applicant’s Name ................. : GEMMY INDUSTRIES (HK)LIMITED BVI Address .................................. : Unit No.301 on 3rd Floor, East Ocean Centre, No.98, Kowloon, Hong Kong Manufacturer's Name ........... : GEMMY INDUSTRIES (HK)LIMITED BVI Address .................................. : Unit No.301 on 3rd Floor, East Ocean Centre, No.98, Kowloon, Hong Kong Factory1 .................................. ZAIXING ELECTRONIC (SHENZHEN) CO., LTD Address .................................. : No. 1 and 3, 1st Road Yang Yong, Tangxiayong Community, Yanluo Street, Bao'an District, Shenzhen City, Guangdong Province, China Factory2 .................................. YUQI ELECTRONIC (HUAIBEI) CO., LTD Address ................................... 32 fengguan road, xiangshan district, Huaibei city, Anhui province, China Factory3 .................................. XINGYU ELECTRONIC (HUIZHOU) CO., LTD Address ................................... Hengjiangwei Village, Yihe Town, Boluo County, Huizhou City, Guangdong Province, China Factory4 .................................. QIYANG TECHNOLOGY (HUAIBEI) CO., LTD Address ................................... 32 Fengguan road, xiangshan district, Huaibei city, Anhui province Factory5 .................................. YUAN HONG COMPANY LIMITED Address ................................... No. 3 Street, My Xuan A Industrial Zone, My Xuan Ward, Phu My Town, Ba Ria-Vung Tau province, Vietnam Factory6 .................................. DYNATECH LIGHTING TECHNOLOGY CO., LTD Address ................................... GIGA RESOURCE SPECIAL ECONOMIC ZONE, NATIONAL ROAD NO.1, DERM POU VILLAGE, REAY COMMUNE, SVAY TEAP DISTRICT, SVAY RIENG PROVINCE, CAMBODIA Product Description Product Name ........................ : Orchestra of Lights-Lightshow Projection Brand Name ........................... : N/A Model Name ........................... : 883104 Series Model(s) .................... : N/A Test Standards...................... : FCC Part15.247 Test Procedure ....................... : ANSI C63.10-2020 This device described above has been tested by STS, the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. Date of Test ............................... : Date of receipt of test item ......... : 14 Mar. 2024 Date (s) of performance of tests : 14 Mar. 2024 ~ 30 Apr. 2024 Date of Issue ............................. : 30 Apr. 2024 Test Result ................................. : Pass Page 3 of 96 Report No.: STS2403107W02 Testing Engineer : (Aaron Bu) Technical Manager : (Chris Chen) Authorized Signatory : (Bovey Yang) Page 4 of 96 Report No.: STS2403107W02 Table of Contents Page 1. SUMMARY OF TEST RESULTS 7 1.1 TEST FACTORY 8 1.2 MEASUREMENT UNCERTAINTY 8 2. GENERAL INFORMATION 9 2.1 GENERAL DESCRIPTION OF THE EUT 9 2.2 DESCRIPTION OF THE TEST MODES 11 2.3 FREQUENCY HOPPING SYSTEM REQUIREMENTS 11 2.4 TABLE OF PARAMETERS OF TEST SOFTWARE SETTING 13 2.5 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 13 2.6 DESCRIPTION OF NECESSARY ACCESSORIES AND SUPPORT UNITS 14 2.7 EQUIPMENTS LIST 15 3. EMC EMISSION TEST 16 3.1 CONDUCTED EMISSION MEASUREMENT 16 3.2 RADIATED EMISSION MEASUREMENT 20 4. CONDUCTED SPURIOUS & BAND EDGE EMISSION 32 4.1 LIMIT 32 4.2 TEST PROCEDURE 32 4.3 TEST SETUP 33 4.4 EUT OPERATION CONDITIONS 33 4.5 TEST RESULTS 33 5. NUMBER OF HOPPING CHANNEL 34 5.1 LIMIT 34 5.2 TEST PROCEDURE 34 5.3 TEST SETUP 34 5.4 EUT OPERATION CONDITIONS 34 5.5 TEST RESULTS 34 6. AVERAGE TIME OF OCCUPANCY 35 6.1 LIMIT 35 6.2 TEST PROCEDURE 35 6.3 TEST SETUP 35 6.4 EUT OPERATION CONDITIONS 35 6.5 TEST RESULTS 35 7. HOPPING CHANNEL SEPARATION MEASUREMEN 36 Page 5 of 96 Report No.: STS2403107W02 Table of Contents Page 7.1 LIMIT 36 7.2 TEST PROCEDURE 36 7.3 TEST SETUP 36 7.4 EUT OPERATION CONDITIONS 36 7.5 TEST RESULTS 36 8. BANDWIDTH TEST 37 8.1 LIMIT 37 8.2 TEST PROCEDURE 37 8.3 TEST SETUP 37 8.4 EUT OPERATION CONDITIONS 37 8.5 TEST RESULTS 37 9. OUTPUT POWER TEST 38 9.1 LIMIT 38 9.2 TEST PROCEDURE 38 9.3 TEST SETUP 39 9.4 EUT OPERATION CONDITIONS 39 9.5 TEST RESULTS 39 10. ANTENNA REQUIREMENT 40 10.1 STANDARD REQUIREMENT 40 10.2 EUT ANTENNA 40 APPENDIX 1-TEST DATA 41 1. DWELL TIME 41 2. MAXIMUM PEAK CONDUCTED OUTPUT POWER 51 3. -20DB BANDWIDTH 57 4. CARRIER FREQUENCIES SEPARATION 63 5. NUMBER OF HOPPING CHANNEL 69 6. BAND EDGE 72 7. BAND EDGE(HOPPING) 79 8. CONDUCTED RF SPURIOUS EMISSION 86 APPENDIX 2-PHOTOS OF TEST SETUP 96 Page 6 of 96 Report No.: STS2403107W02 Revision History Rev. Issue Date Report No. Effect Page Contents 00 30 Apr. 2024 STS2403107W02 ALL Initial Issue Page 7 of 96 Report No.: STS2403107W02 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: KDB 558074 D01 15.247 Meas Guidance v05r02. FCC Part 15.247,Subpart C Standard Section Test Item Judgment Remark 15.207 Conducted Emission PASS -- 15.247(a)(1) Hopping Channel Separation PASS -- 15.247(a)(1)&(b)(1) Output Power PASS -- 15.209 Radiated Spurious Emission PASS -- 15.247(d) Conducted Spurious & Band Edge Emission PASS -- 15.247(a)(1)(iii) Number of Hopping Frequency PASS -- 15.247(a)(1)(iii) Dwell Time…

Text truncated - open the document above for the full version.

Page 1 of 2 FCC ID.: GPO883104B DSS& DXX Setup photo Model Number: 883104 DSS& DXX conduction DSS& DXX radiation L Page 2 of 2 FCC ID.: GPO883104B DSS& DXX radiation H