GU6-SDCMSD10GSummit SDC-MSD10G used in a Monarch model 6052 or 6057

©2011 Avery Dennison Corp. All rights reserved. 28028 28028 0 0 04/18/07 7512 653258 $15.50 32232 SALE $25.00 58523 49 PEARL EARRINGS 99565 $200.00 04/18/07 8 7512 45453 9 Operator's Handbook ® Pathfinder 6057 Printer TC6057OH Rev. AA 6/11 DRAFT Each product and program carries a respective written warranty, the only warranty on which the customer can rely. Avery Dennison Corp. reserves the right to make changes in the product, the programs, and their availability at any time and without notice. Although Avery Dennison Corp. has made every effort to provide complete and accurate information in this manual, Avery Dennison Corp. shall not be liable for any omissions or inaccuracies. Any update will be incorporated in a later edition of this manual. 2010 Avery Dennison Corp. All rights reserved. No part of this publication may be reproduced, transmitted, stored in a retrieval system, or translated into any language in any form by any means, without the prior written permission of Avery Dennison. WARNING This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to local radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense. CANADIAN D.O.C. WARNING This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. Le présent appareil numérique n'émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la classe A prescrites dans le Réglement sur le brouillage radioélectrique édicte par le ministère des Communications du Canada. Trademarks Pathfinder®, 9462, and 9465 are trademarks of Avery Dennison Retail Information Services, LLC. Avery Dennison® is a trademark of Avery Dennison Corporation. Microsoft and Windows are trademarks of Microsoft Corporation. Avery Dennison Printer Systems Division 170 Monarch Lane Miamisburg, OH 45342 Outside the U.S., send batteries to: EMEA, 4 Awberry Court Croxle y Business Park, Hatters DRAFT i TABLE OF CONTENTS INTRODUCTION ................................................................................................................................. 1-1 Using this Manual.......................................................................................................................... 1-2 Audience ...................................................................................................................................... 1-2 Getting Started ............................................................................................................................. 1-2 Helpful Reminders ......................................................................................................................... 1-2 USING BATTERIES ............................................................................................................................ 2-1 Using the Main Battery .................................................................................................................. 2-1 Charging the Main Battery .......................................................................................................... 2-1 Replacing the Main Battery ......................................................................................................... 2-1 Checking the Battery Status ........................................................................................................... 2-2 Main Battery Safety Information ...................................................................................................... 2-3 USING SUPPLIES .............................................................................................................................. 3-1 Loading Supplies........................................................................................................................... 3-1 Loading for Non-Peel Mode ......................................................................................................... 3-2 Loading Peel Mode Supplies ....................................................................................................... 3-3 Calibrating the Supply ................................................................................................................... 3-4 Selecting the Supply Type.............................................................................................................. 3-4 ENTERING & PRINTING DATA ............................................................................................................ 4-1 Using the Input Panel .................................................................................................................... 4-1 Using the Display .......................................................................................................................... 4-2 Reading the Status Bar............................................................................................................... 4-2 Scanning Bar Codes ...................................................................................................................... 4-2 Certification Note .......................................................................................................................... 4-3 Printing ....................................................................................................................................…

Text truncated - open the document above for the full version.

TC6057NARCD Rev AA 6/11 ©2011 Avery Dennison Corp. All Rights Reserved. REGULATORY COMPLIANCE INFORMATION Avery Dennison products are designed to be compliant with the rules and regulations in the locations into which they are sold and will be labeled as required. Any changes or modifications to Avery Dennison equipment not expressly approved by Avery Dennison could void the user authority to operate the equipment. Follow all cautions and instructions marked on the product. Do not operate Avery Dennison products without the covers in place. It may damage the product or cause personal injury. Never push objects of any kind through openings in the equipment. Dangerous energy might be present and cause fire, electric shock, or damage to the printer. Do not block or cover the openings of the equipment. Do not place the product near a radiator or heat register, this could cause the product to overheat. Avery Dennison products are designed to work with power systems that have a grounded neutral (grounded return for DC-powered products). Do not plug an Avery Dennison product into any other type of power system; this could cause electric shock. Contact your facilities manager or qualified electrician if you are not sure what power supply you have. The power cord serves as the primary disconnect for the product. Plug the power cord into a nearby grounded power outlet. Do not connect the power cord when the power supply has been removed from the product. Copyright Information Each product and program carries a respective written warranty, the only warranty on which the customer can rely. Avery Dennison Corp. reserves the right to make changes in the product, the programs, and their availability at any time and without notice. Although Avery Dennison Corp. has made every effort to provide complete and accurate information in this manual, Avery Dennison Corp. shall not be liable for any omissions or inaccuracies. Any update will be incorporated in a later edition of this manual. No part of this publication may be reproduced, transmitted, stored in a retrieval system, or translated into any language in any form by any means, without the prior written permission of Avery Dennison Corp. Information in this document supercedes information in previous versions. Covered Models This document is intended to cover the Pathfinder® 6057. Specified trademarks are that of Avery Dennison Retail Information Services, LLC. Avery Dennison® is a trademark of Avery Dennison Corporation. Avery Dennison Printer Systems Division 170 Monarch Lane Miamisburg, OH 45342 Waste Electrical and Electronic Equipment (WEEE) for European Union (EU) Customers WEEE Symbol Avery Dennison is fully committed to achieving the EU mandated WEEE directives. This product, its components, and accessories must be sent to a designated collection facility for the proper disassembly and disposal in accordance with the WEEE directives. Any product or accessory marked with the WEEE symbol must be returned to a designated collection facility. For proper disposal of the printer outside of the U.S., send the printer and its accessories to: EMEA, 4 Awberry Court Croxley Business Park, Hatters Lane, Watford, WD18 8PD 2-EN U.S. Battery Recycling Information Do not throw batteries in trash; recycle them based on local regulations. The Rechargeable Battery Recycling Corporation (RBRC) is a non-profit organization created to promote recycling of rechargeable batteries. For more information about how to recycle batteries in your area, visit www.rbrc.org. Batteries can also be returned postage-paid to: ERC, 200 Monarch Lane, Door #39, Miamisburg, OH 45342 Warning - California Only Perchlorate Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate Warning applies only to primary CR (Manganese Dioxide) Lithium coin cell batteries sold or distributed in California, USA. FCC Regulations – Class B This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the Federal Communications Commissions Rules and Regulation. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be responsible for correction. However, there is no guarantee that interference will not occur in a particular installation. If the equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to EN-3 4-EN correct the interference by one or more of the following measures:  Re-orient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that which the receiver is connected. This Class B digital apparatus meets the requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la Classe B respecte toutes les exigences du Règlement sur le Matériel Brouilleur du Canada. 802.11b/g Regulatory Compliance Information (if installed) This section details the regulatory compliance information specific to the wireless components in your printer. It may not apply to other RF devices in the printer. Refer to the documentation provided with those RF devices for regulatory information. Avery Dennison RF products are designed to be compliant with the rules and regulations in the locations into which they are sold and will be labeled as required. The majority of Avery Dennison RF devices are type approved and do not require the user to obtain a license or authorization before usi…

Text truncated - open the document above for the full version.

Avery Dennison Retail Information Services, LLC, a Subsidiary of Avery Dennison Corporation 170 Monarch Lane Miamisburg, OH 45342 Phone 1.937.865.2123 Fax 1.937.865.2048 July 20, 2011 SIEMIC Inc. 2206 Ringwood Avenue San Jose, CA 95131 Tel:+1(408)526 1188 Fax:+1(408)526 1088 R ef: Model: 128935 To Whom It May Concern: (128935) FCC ID : 128935 and FCC ID: GU6-SDCMSD10G, is seeking FCC Authorization as a Single Modular transmitter / Single Limited Modular Approval (Please check one). The EUT meets the requirements for Single Modular approval / Single Limited Modular Approval (please check one) as detailed in FCC public Notice DA00-1407. Compliance to each of the requirements is described below: Questions are: 1. “The modular transmitter must have its own RF shielding.” Yes / No 2. “The modular transmitter must have buffered modulation/data inputs.” Yes / No 3. “The modular transmitter must have its own power supply regulation.” Yes / No 4. “The modular transmitter must comply with the antenna requirements of section 15.203 and 15.204(c).” Yes / No 5. “The modular transmitter must be tested in a stand-alone configuration.” Yes / No 6. “The modular transmitter must be labeled with its own FCC ID number.” Yes / No 7. “The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacture must provide adequate instruction along with the module to explain any such requirements.” Yes / No 8. “The modular transmitter must comply with any applicable RF exposure requirements.” Yes / No Avery Dennison Retail Information Services, LLC, a Subsidiary of Avery Dennison Corporation Note: (1) LMA may be granted when one or more of the requirements in the table above cannot be demonstrated. LMA will also be issued in those instances where applicants can demonstrate that they will retain control over the final installation of the device, such that compliance of the end product is assured. In such cases, an operating condition on the LMA for the module must state that the module is only approved for use when installed in devices produced by a specific manufacturer. When LMA is sought, the application for equipment certification must specifically state how control of the end product into which the module will be installed, and will be maintained, such that full compliance of the end product is always ensured. (2) Host devices which contain separately certified modules do not need to be recertified, provided that they meet the following conditions: (i) The host device, as a stand-alone unit without any separately certified modules, complies with all applicable Radio Standards Specifications. (ii) The host device and all the separately certified modules it contains jointly meet the RF exposure compliance requirements of RSS-102, if applicable. (iii) The host device complies with the certification labeling requirements of each of the modules it contains. Note 1: Compliance of a module in its final configuration is the responsibility of the applicant. A host device will not be considered certified if the instructions regarding antenna configuration provided in the original description, of one or more separately certified modules it contains, were not followed. Example: A separately certified low-power transceiver module using Bluetooth technology which is housed in a desktop computer, laptop or peripheral does not require the overall system to be recertified, if the desktop computer, laptop or peripheral, as a stand- alone unit, complies with all applicable technical standards. If you have any questions or concerns, please contact me by email at [email protected]; phone at 1-937-865-2020; or by fax at 1-937-865-2048. Sincerely, James A Bacher Senior Engineer Avery Dennison RIS LLC 170 Monarch Lane Miamisburg, Ohio 45342 1-937-865-2020 (voice) 1-937-865-2048 (fax) [email protected] cc: Dave Best

Avery Dennison Retail Information Services, LLC, a Subsidiary of Avery Dennison Corporation 170 Monarch Lane Miamisburg, OH 45342 Phone 1.937.865.2123 Fax 1.937.865.2048 July 20, 2011 SIEMIC Inc. 2206 Ringwood Avenue San Jose, CA 95131 Tel:+1(408)526 1188 Fax:+1(408)526 1088 Ref: Model: 128935 and FCC ID: GU6-SDCMSD10G To Whom It May Concern: Model 128935, We, Avery Dennison RIS LLC, declare that we will retain control over the final installation of the device, (FCC ID: GU6-SDCMSD10G) such that compliance of the end product is assured. In such cases, an operating condition on the LMA for the module must be only approved for use when installed in devices produced by a specific manufacturer. If you have any questions or concerns, please contact me by email at [email protected]; phone at 1-937-865-2020; or by fax at 1-937-865-2048. Sincerely, James A Bacher Senior Engineer Avery Dennison RIS LLC 170 Monarch Lane Miamisburg, Ohio 45342 1-937-865-2020 (voice) 1-937-865-2048 (fax) [email protected] cc: Dave Best

Avery Dennison Retail Information Services, LLC, a Subsidiary of Avery Dennison Corporation 170 Monarch Lane Miamisburg, OH 45342 Phone 1.937.865.2123 Fax 1.937.865.2048 July 20, 2011 SIEMIC Inc. 2206 Ringwood Avenue San Jose, CA 95131 Tel:+1(408)526 1188 Fax:+1(408)526 1088 Dear Sir/Madam, Re: Project and Product Certification Representative Authorization Letter We, Avery Dennison RIS LLC. hereby authorize SIEMIC, INC. to act as a Certification Body for certifying for the following project(s): 802.11b/g radio module, model: 128935 (FCC ID : GU6-SDCMSD10G) We affirm that between SIEMIC and Avery Dennison RIS LLC., any difference in understanding, including test plan, measurement methods, applicable standards and relevant procedures and processes have been resolved prior to commencement of testing activities. Sincerely, James A Bacher Senior Engineer Avery Dennison RIS LLC 170 Monarch Lane Miamisburg, Ohio 45342 1-937-865-2020 (voice) 1-937-865-2048 (fax) [email protected] cc: Dave Best

Avery Dennison Retail Information Services, LLC, a Subsidiary of Avery Dennison Corporation 170 Monarch Lane Miamisburg, OH 45342 Phone 1.937.865.2123 Fax 1.937.865.2048 July 22, 2011 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: GU6-SDCMSD10G We hereby request confidential treatment of information accompanying this application as outlined below: • System Schematics • System Operational Description • System Block Diagram • Module Schematics • Module Product Description • Module Block Diagram The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. If you have any questions or concerns, please contact me by email at [email protected]; phone at 1-937-865-2020; or by fax at 1-937-865-2048. Sincerely, James A Bacher Senior Engineer Avery Dennison RIS LLC 170 Monarch Lane Miamisburg, Ohio 45342 1-937-865-2020 (voice) 1-937-865-2048 (fax) [email protected] cc: Dave Best

Host 6057 EUT - Front View EUT - Back View EUT - Right View EUT - Left View EUT - Top View EUT - Bottom View Battery Host 6052 EUT - Front View EUT - Back View EUT - Right View EUT - Left View EUT - Top View EUT - Bottom View Battery

Label Drawing Label Location Avery Dennison RIS LLC. Model: 128935 FCC ID: GU6-SDCMSD10G IC: 1502A-SDCMSD10G Avery Dennison RIS LLC. Model: 128935 FCC ID: GU6-SDCMSD10G IC: 1502A-SDCMSD10G

RF Module Top View RF Module Bottom View RF Module without RF shielding Top View PCB A- Bottom View Antenna Antenna

AVERY DENNISON RETAIL INFORMATION SERVICES LLC HANDHELD SCAN-PRINT-APPLY THERMAL BARCODE PRINTER Model: 6057 July 11 2011 Report No.: SL11012801-AVE-004-01 (DTS) (This report supersedes: None) This Test Report is Issued Under the Authority of: Choon Sian Ooi Compliance Engineer Leslie Bai Director of Certification Modifications made to the product : None This test report may be reproduced in full only. All Test Data Presented in this report is only applicable to presented Test sample. Title: RF Test Report of Avery Dennison Retail Information Services LLC Model : 6057 To C95.1, IEEE 1528, OET Bulletin 65 Supplement C & RSS,102 Issue 4 and Safety Code 6 Serial# SL11012801,AVE,004,01 (DTS) Issue Date July 11 2011 Page 2 of 77 www.siemic.com REDIT SIEMIC SIEM Laboratory Introduction ATION SIEMIC, headquartered in the heart of Silicon Valley, with superior facilities in US and Asia, is one of the leading independent testing and certification facilities providing customers with one-stop shop services for Compliance Testing and Global Certifications. In addition to testing and certification, SIEMIC provides initial design reviews and compliance management through out a project. Our extensive experience with China, Asia Pacific, North America, European, and international compliance requirements, assures the fastest, most cost effective way to attain regulatory compliance for the global markets . Accreditations for Conformity Assessment Country/Region Accreditation Body Scope USA FCC, A2LA EMC , RF/Wireless , Telecom , SAR Canada IC, A2LA, NIST EMC, RF/Wireless , Telecom , SAR Taiwan BSMI , NCC , NIST EMC, RF, Telecom , Safety Hong Kong OFTA , NIST RF/Wireless ,Telecom Australia NATA, NIST EMC, RF, Telecom , Safety Korea KCC/RRA, NIST EMI, EMS, RF , Telecom, Safety , SAR Japan VCCI, JATE, TELEC, RFT EMI, RF/Wireless, Telecom Mexico NOM, COFETEL, Caniety Safety, EMC , RF/Wireless, Telecom Europe A2LA, NIST EMC, RF, Telecom , Safety, SAR Accreditations for Product Certifications Country Accreditation Body Scope USA FCC TCB, NIST EMC , RF , Telecom Canada IC FCB , NIST EMC , RF , Telecom Singapore iDA, NIST EMC , RF , Telecom EU NB EMC & R&TTE Directive Japan MIC, (RCB 208) RF , Telecom HongKong OFTA (US002) RF , Telecom Title: RF Test Report of Avery Dennison Retail Information Services LLC Model : 6057 To C95.1, IEEE 1528, OET Bulletin 65 Supplement C & RSS,102 Issue 4 and Safety Code 6 Serial# SL11012801,AVE,004,01 (DTS) Issue Date July 11 2011 Page 3 of 77 www.siemic.com This page has been left blank intentionally. Title: RF Test Report of Avery Dennison Retail Information Services LLC Model : 6057 To C95.1, IEEE 1528, OET Bulletin 65 Supplement C & RSS,102 Issue 4 and Safety Code 6 Serial# SL11012801,AVE,004,01 (DTS) Issue Date July 11 2011 Page 4 of 77 www.siemic.com CONTENTS 1 EXECUTIVE SUMMARY & EUT INFORMATION......................................................................................................................... 6 2 TECHNICAL DETAILS ................................................................................................................................................................. 7 3 INTRODUCTION ........................................................................................................................................................................... 8 4 SAR MEASUREMENT SETUP ..................................................................................................................................................... 9 5 ANSI/IEEE C95.1 – 1999 RF EXPOSURE LIMIT ....................................................................................................................... 19 6 SYSTEM AND LIQUID VALIDATION ......................................................................................................................................... 20 7 TYPE A MEASUREMENT UNCERTAINTY ............................................................................................................................... 24 8 OUTPUT POWER VERIFICATION ............................................................................................................................................. 26 9 SAR TEST RESULTS ................................................................................................................................................................. 27 ANNEX A. TEST INSTRUMENT & METHOD ..................................................................................................................................... 32 ANNEX B EUT AND TEST SETUP PHOTOGRAPHS ....................................................................................................................... 34 ANNEX C CALIBRATION REPORTS ................................................................................................................................................ 35 Title: RF Test Report of Avery Dennison Retail Information Services LLC Model : 6057 To C95.1, IEEE 1528, OET Bulletin 65 Supplement C & RSS,102 Issue 4 and Safety Code 6 Serial# SL11012801,AVE,004,01 (DTS) Issue Date July 11 2011 Page 5 of 77 www.siemic.com This page has been left blank intentionally. Title: RF Test Report of Avery Dennison Retail Information Services LLC Model : 6057 To C95.1, IEEE 1528, OET Bulletin 65 Supplement C & RSS,102 Issue 4 and Safety Code 6 Serial# SL11012801,AVE,004,01 (DTS) Issue Date July 11 2011 Page 6 of 77 www.siemic.com 1 Executive Summary & EUT information The purpose of this test programmed was to demonstrate compliance of the Avery Dennison Retail Information Services LLC Model: 6057 against the current Stipulated Standards. The Handheld Scan,Print,Apply thermal barcode printer have demonstrated compliance with the C95.1 , IEEE 1528, OET Bulletin 65 Supplement C , RSS,102 Issue 4 and Safety Code 6. The test has demonstrated that this unit complies with stipulated standards. EUT Information EUT Description : The printer is a handheld, battery po…

Text truncated - open the document above for the full version.

AVERY DENNISON RETAIL INFORMATION SERVICES LLC SUMMIT WIFI MODULE (WITH 6057 & 6052 HOST) MODEL: 128935 July 11 2011 Report No.: SL11012801+AVE+004+01 (DTS) (This report supersedes: None) This Test Report is Issued Under the Authority of: Choon Sian Ooi Compliance Engineer Leslie Bai Director of Certification Modifications made to the product : None This test report may be reproduced in full only. All Test Data Presented in this report is only applicable to presented Test sample. Title: RF Test Report of Avery Dennison Retail Information Services LLC Model : 128935 To FCC 15.247:2010 & RSS)210 Issue8 : 2010 Serial# SL11012801)AVE)004)01 (DTS) Issue Date July 11 2011 Page 2 of 78 www.siemic.com REDIT SIEMIC SIEM Laboratory Introduction ATION SIEMIC, headquartered in the heart of Silicon Valley, with superior facilities in US and Asia, is one of the leading independent testing and certification facilities providing customers with one)stop shop services for Compliance Testing and Global Certifications. In addition to testing and certification, SIEMIC provides initial design reviews and compliance management through out a project. Our extensive experience with China, Asia Pacific, North America, European, and international compliance requirements, assures the fastest, most cost effective way to attain regulatory compliance for the global markets. Accreditations for Conformity Assessment Country/Region Accreditation Body Scope USA FCC, A2LA EMC , RF/Wireless , Telecom , SAR Canada IC, A2LA, NIST EMC, RF/Wireless , Telecom , SAR Taiwan BSMI , NCC , NIST EMC, RF, Telecom , Safety Hong Kong OFTA , NIST RF/Wireless ,Telecom Australia NATA, NIST EMC, RF, Telecom , Safety Korea KCC/RRA, NIST EMI, EMS, RF , Telecom, Safety , SAR Japan VCCI, JATE, TELEC, RFT EMI, RF/Wireless, Telecom Mexico NOM, COFETEL, Caniety Safety, EMC , RF/Wireless, Telecom Europe A2LA, NIST EMC, RF, Telecom , Safety, SAR Accreditations for Product Certifications Country Accreditation Body Scope USA FCC TCB, NIST EMC , RF , Telecom Canada IC FCB , NIST EMC , RF , Telecom Singapore iDA, NIST EMC , RF , Telecom EU NB EMC & R&TTE Directive Japan MIC, (RCB 208) RF , Telecom HongKong OFTA (US002) RF , Telecom Title: RF Test Report of Avery Dennison Retail Information Services LLC Model : 128935 To FCC 15.247:2010 & RSS)210 Issue8 : 2010 Serial# SL11012801)AVE)004)01 (DTS) Issue Date July 11 2011 Page 3 of 78 www.siemic.com This page has been left blank intentionally. Title: RF Test Report of Avery Dennison Retail Information Services LLC Model : 128935 To FCC 15.247:2010 & RSS)210 Issue8 : 2010 Serial# SL11012801)AVE)004)01 (DTS) Issue Date July 11 2011 Page 4 of 78 www.siemic.com CONTENTS 1 EXECUTIVE SUMMARY & EUT INFORMATION ............................................................................................................. 6 2 TECHNICAL DETAILS .................................................................................................................................................. 7 3 MODIFICATION ............................................................................................................................................................ 8 4 TEST SUMMARY .......................................................................................................................................................... 9 5 MEASUREMENTS, EXAMINATION AND DERIVED RESULTS ...................................................................................... 10 ANNEX A. TEST INSTRUMENT & METHOD......................................................................................................................... 42 ANNEX B EUT AND TEST SETUP PHOTOGRAPHS ........................................................................................................... 46 ANNEX C. TEST SETUP AND SUPPORTING EQUIPMENT ................................................................................................... 46 ANNEX D USER MANUAL, BLOCK DIAGRAM, CIRCUIT DIAGRAM .....................................................................…

Text truncated - open the document above for the full version.