GU67410-02Print Server

Rhein Tech Laboratories Report number: 2002180 360 Herndon Parkway FCC: Part 15.247 Suite 1400 Industry Canada: RSS-210 FCC ID: GU67410-02 Herndon, VA 20170 http://www.rheintech.com M/N: 7410-02 Page 52 of 83 APPENDIX J: MANUAL Please refer to the following pages. TC9850ENOI Rev. AC 9/02 DRAFT 2001 Paxar Corporation. All rights reserved. Paxar Monarch 7410 Print Server Each product and program carries a respective written warranty, the only warranty on which the customer can rely. Paxar reserves the right to make changes in the product, the programs, and their availability at any time and without notice. Although Paxar has made every effort to provide complete and accurate information in this manual, Paxar shall not be liable for any omissions or inaccuracies. Any update will be incorporated in a later edition of this manual. 2001 Paxar Corporation. All rights reserved. No part of this publication may be reproduced, transmitted, stored in a retrieval system, or translated into any language in any form by any means, without the prior written permission of Paxar Corporation. Trademarks MONARCH is a registered trademark of Monarch Marking Systems, Inc. 7410 and 9850 are trademarks of Monarch Marking Systems, Inc. Paxar is a trademark of Paxar Corporation. Paxar Corporation 170 Monarch Lane Miamisburg, OH 45342 Regulatory Compliance Paxar RF products are designed to be compliant with the rules and regulations in the locations into which they are sold and will be labeled as required. The majority of Paxar RF devices are type approved and do not require the user to obtain license or authorization before using the equipment. Any changes or modifications to Paxar equipment not expressly approved by Paxar could void the user authority to operate the equipment. FCC RF Exposure Guidelines To comply with FCC exposure requirements, antennas that are mounted externally at remote locations or operating near users at stand-alone desktop of similar configurations must operate with a minimum separation distance of 20 cm from all persons. Declaration of Conformity for RF Exposure: The radio module has been evaluated under FCC Bulletin OET 65C and found compliant to the requirements as set forth in CFR 47 Sections 2.1091, 2.1093, and 15.247 (b) (4) addressing RF Exposure from radio frequency devices. Radio Frequency Interference Requirements This device has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the Federal Communications Commissions Rules and Regulation. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. However, there is no guarantee that interference will not occur in a particular installation. If the equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: n Re-orient or relocate the receiving antenna. n Increase the separation between the equipment and receiver. n Connect the equipment into an outlet on a circuit different from that which the receiver is connected. n Consult the dealer or an experienced radio/TV technician. CAUTION: The Part 15 radio device operates on a non-interference basis with other devices operating at this frequency when using the listed antenna. Collocation Statement: This device must not be collocated with any other antenna or transmitters. 2 Radio Frequency Interference Requirements - Canada This device complies with RSS 210 of Industry & Science Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. This Class A digital apparatus meets the requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la Classe A especte toutes les exigencies du Reglement sur le Materiél Brouilleur du Canada. European Economic Area The European variant is intended for use throughout the European Economic Area, however authorization for use restricted as follows: European standards dictate maximums radiated transmit power of 100 mW EIRP and frequency range 2.400 –2.4835 GHz. France, the equipment is to be restricted to the 2.4465 – 2.4835 GHz frequency range. Belgium outside, the equipment is to be restricted to the 2.460 – 2.4835 GHz frequency range. Operation in Italy requires a user license. i TABLE OF CONTENTS Installing the Print Server Hardware....................................................1-1 System Requirements........................................................................1-1 Network Protocols Supported.............................................................1-2 Checking the Print Server Hardware...................................................1-3 Sample Test Page..........................................................................1-6 Verifying Successful Installation.........................................................1-7 Configuring the 802.11b and IP Settings................................................2-1 Configuring the Print Server...............................................................2-1 Before You Begin..............................................................................2-1 Installing the Software.......................................................................2-2 Management Methods.........................…

Text truncated - open the document above for the full version.

American Telecommunications Certification Body Inc. 6731 Whittier Ave, McLean, VA 22101 October 1, 2002 RE: Monarch Marketing Systems, Inc, dba Paxar Corporation FCC ID: GU67410-02 After a review of the submitted information, I have a few comments on the above referenced Application. 1) Please provide a photograph of the tope of the PCMCIA Card with ALL shields removed. Response : Please refer to the photograph uploaded with this response and advise if it is acceptable. 2) The Label includes the FCC logo and the phrases "Tested to Comply with FCC Standards" and "For Office Use Only". These phrases are only necessary for Class B PC peripheral devices authorized using a DoC approval. Class A PC peripherals are authorized using a verification authorization. This labeling is therefore not applicable and should be removed. Please provide an updated label. Response : Please refer to the revised label sample, uploaded with this response. 3) Please explain the "EtherWind-Plus" description given in the operational description. This mentions a card with an integrated antenna and output power of 1000 mW (1 Watt). The EUT application submitted includes a PCMCIA card with external antennas and about 37 mW. Please explain. Response : An invalid description was inadvertently provided. Please refer to the revised description uploaded with this response. 4) FYI, Table 5.3 shows one reading at 1663 MHz that was taken with an Average detector. Please note that when an average limit is specified by the rules, there is also a limit on the peak emission that is 20 dB above the average limit (15.35(b)). Please be sure to include both peak and average measurements for future submittals unless the peak measurement supplied meets with the average limit. Response : Thank you for this clarification; this has been noted for future submittals. 5) FYI, the limit in tables 9.4-9.6 are sometimes listed with and without the negative sign. Response : Thank you for pointing this out; this has been noted for future submittals. Timothy R. Johnson, Examining Engineer Direct Phone: 404-414-8071 mailto: [email protected] The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information may result in application termination. Correspondence should be considered part of the permanent submission and may be viewed from the Internet after a Grant of Equipment Authorization is issued. Please do not respond to this correspondence using the email reply button. In order for your response to be processed expeditiously, you must submit your documents through the AmericanTCB.com website. Also, please note that partial responses increase processing time and should not be submitted. Any questions about the content of this correspondence should be directed to the sender.

Rhein Tech Laboratories Report number: 2002180 360 Herndon Parkway FCC: Part 15.247 Suite 1400 Industry Canada: RSS-210 FCC ID: GU67410-02 Herndon, VA 20170 http://www.rheintech.com M/N: 7410-02 Page 44 of 83 APPENDIX C: AGENCY AUTHORIZATION LETTER Please refer to the following page.

Rhein Tech Laboratories Report number: 2002180 360 Herndon Parkway FCC: Part 15.247 Suite 1400 Industry Canada: RSS-210 FCC ID: GU67410-02 Herndon, VA 20170 http://www.rheintech.com M/N: 7410-02 Page 45 of 83 APPENDIX D: CONFIDENTIALITY REQUEST LETTER (IF APPLICABLE) Please refer to the following page.

Rhein Tech Laboratories Report number: 2002180 360 Herndon Parkway FCC: Part 15.247 Suite 1400 Industry Canada: RSS-210 FCC ID: GU67410-02 Herndon, VA 20170 http://www.rheintech.com M/N: 7410-02 Page 46 of 83 APPENDIX E: ATTESTATION LETTERS (IF APPLICABLE) Please refer to the following pages. PAXAR ~ \ , September 19, 2002 Subject: Manufacturer's Attestation Monarch Marking Systems, Inc dba Paxar Corporation is a manufacturer of barcode printers used primarily in retail and commercial distribution centers. As the printers are price tag and label printers and require custom programming to use, the printers would never be used by a consumer. For that reason Monarch has always used the FCC/IC Class A levels for our printers. As wireless devices are supposed to be Class B, anytime we found a signal over the Class B levels, we powered down the Zcom 802.11(b) wireless card to confirm that the signal was coming from our printer and not the wireless card. Therefore all the signals that were above the Class B levels were confirmed to be a signal from our printer, which is a Class A device. hh~~ Senior Engineer Monarch Marki ng Systems, Inc. dba Paxar Corporation. United States Phone: 1.800.543.6650 (prompt 5) Fax: 937.865.6799 High Volume Printing Medium Volume Printing Shipping Labels Cross Docking Distribution Center Labels Receiving/Routing Stationery Compliance Labeling Portable Compliance Labeling Item Ticketing/Labeling WIP Management Bin Marking TM D.C. High Performance Printer Systems Q: Do you need to print crisp accurate barcodes at full speed?Would you like to eliminate remote batchprinting and keep employees on the dock?Are you looking for ways to move volume merchandise more efficiently? Paxar Corporation105 Corporate Park DriveWhite Plains, NY 10604email: [email protected]  = best application A: Paxar’s D.C. High Performance Printer Systems T op quality at top speed for high-volume needs . Batch labeling takes employees off the dock and slows youdown. Bar code errors bring shipping delays and costly fines.A high-performance bar code printer moves merchandisequickly and accurately boosting your bottom line.• Keep merchandise moving by keeping employees on the dock. • On-line printing ensures data integrity, avoids key-in errorsand inefficient batch labeling. • Accurate, compliant labeling means no delays, no costly fines, no worries. • Reliable high-speed labeling moves more merchandise. • Easily integrates in-line with your PC-scanner system,reducing your downtime at integration. Applications CanadaPhone: 905.839.8057Fax: 905.839.8169 In-line Label Printer-Applicator www.paxar.com Bar code labeling solutions for volume needs. Berkut (9825) Tabletop Bar Code Printer Percheron (9850) High-Volume Printer       ©2002 Paxar Corporation     Creative Services Labeling Systems Security Solutions Retail Control Systems Product Branding Global Data Distribution Inventory Tracking Pricing Systems TM DC High Perf Print Sys.2 3/21/02 5:02 PM Page 1 Bring the bar code printer to the dock and watch productivity soar. Percheron (9850) High-Volume PrinterThe Percheron High-Volume Printer moves your merchandise quickly through the supply chainwith versatile tag and label printing including linerless labels and hang tags. Optimally designed tobe cart-ready and durable, it increases productivity wherever it goes. The 200-meter supply rollsand 600-meter ribbons are specifically engineered to produce 31% fewer stops to reload. Printheads are replaced by the user without tools within seconds, decreasing downtime and improvingefficiency. It is the fastest printer in its class, generating crisp, accurate bar codes even at printspeeds of up to 12 ips. A unique ribbon control eliminates “ribbon wrinkle.” “Fail Safe DotShifting” automatically corrects “bad dots,” and the “Gray Box Alert” prints a gray box in place of abad bar code when dot shifting can’t fix the problem. International font capabilities and multi-lingual display options answer your global needs. Flexible connectivity options include parallel/serial port, ethernet, twinax/coax and RF. For your high-volume needs, you need a high performance bar code printer that isdurable, reliable, and easily integrated in-line. No one offers more solutions thanPaxar. All our printers generate accurate, crisp bar codes and alphanumerics even attop speeds. We offer turnkey solutions complete with printers, supplies, inks, software,service – and we offer them globally. Select the system that’s right for you.SuppliesFor smooth and reliable performance, only Paxar supplies are recommended for use with Paxar bar code printers. Our labels offer virtually 100% scanability, cuttingwasted rescanning time and labeling. For added savings, we also offer linerless labelsthat save on waste and increase storage, shipping and in-line efficiencies by 40%. We offer customized tags and labels with a wide variety of stocks, coatings, inks and adhesives.Ser vice Paxar meets your global needs for service. Unlike most manufacturers, Paxar doesnot outsource its service to third parties with little or no bar code expertise. EveryPaxar printing system is fully supported by Paxar’s Servisource1, the largest net-work of full-time bar code technicians in the industry, each with an average of 19years’ experience.W ar ranty In addition to the standard one-year warranty, a variety of service plans are available to meet your needs. Both on-site and ship-in services are available. ComplyLine Ser vice Subscribers to this 24/7 online service can download the current, pre-approved formats for item marking and carton labeling and be assured they will avoid costlyfines and delays for non-compliance. Virtually every leading retailer is on ComplyLineincluding Dillard’s, Abercrombie & Fitch, Nordstrom, Federated DepartmentStores and Target. For the com plete list of retailers visit www.paxar.com. To subscribe, please call 1.800.543.6650. Why Paxar? Berkut (9825) Tabletop Bar Code…

Text truncated - open the document above for the full version.

American Telecommunications Certification Body Inc. 6731 Whittier Ave, McLean, VA 22101 October 1, 2002 RE: Monarch Marketing Systems, Inc, dba Paxar Corporation FCC ID: GU67410-02 After a review of the submitted information, I have a few comments on the above referenced Application. 1) Please provide a photograph of the tope of the PCMCIA Card with ALL shields removed. 2) The Label includes the FCC logo and the phrases "Tested to Comply with FCC Standards" and "For Office Use Only". These phrases are only necessary for Class B PC peripheral devices authorized using a DoC approval. Class A PC peripherals are authorized using a verification authorization. This labeling is therefore not applicable and should be removed. Please provide an updated label. 3) Please explain the "EtherWind-Plus" description given in the operational description. This mentions a card with an integrated antenna and output power of 1000 mW (1 Watt). The EUT application submitted includes a PCMCIA card with external antennas and about 37 mW. Please explain. 4) FYI, Table 5.3 shows one reading at 1663 MHz that was taken with an Average detector. Please note that when an average limit is specified by the rules, there is also a limit on the peak emission that is 20 dB above the average limit (15.35(b)). Please be sure to include both peak and average measurements for future submittals unless the peak measurement supplied meets with the average limit. 5) FYI, the limit in tables 9.4-9.6 are sometimes listed with and without the negative sign. Timothy R. Johnson Examining Engineer Direct Phone: 404-414-8071 mailto: [email protected] The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information may result in application termination. Correspondence should be considered part of the permanent submission and may be viewed from the Internet after a Grant of Equipment Authorization is issued. Please do not respond to this correspondence using the email reply button. In order for your response to be processed expeditiously, you must submit your documents through the AmericanTCB.com website. Also, please note that partial responses increase processing time and should not be submitted. Any questions about the content of this correspondence should be directed to the sender.

Rhein Tech Laboratories Report number: 2002180 360 Herndon Parkway FCC: Part 15.247 Suite 1400 Industry Canada: RSS-210 FCC ID: GU67410-02 Herndon, VA 20170 http://www.rheintech.com M/N: 7410-02 Page 57 of 83 APPENDIX L: EXTERNAL PHOTOGRAPHS PHOTOGRAPH 7: EUT FRONT VIEW Rhein Tech Laboratories Report number: 2002180 360 Herndon Parkway FCC: Part 15.247 Suite 1400 Industry Canada: RSS-210 FCC ID: GU67410-02 Herndon, VA 20170 http://www.rheintech.com M/N: 7410-02 Page 58 of 83 PHOTOGRAPH 8: EUT REAR VIEW

Rhein Tech Laboratories Report number: 2002180 360 Herndon Parkway FCC: Part 15.247 Suite 1400 Industry Canada: RSS-210 FCC ID: GU67410-02 Herndon, VA 20170 http://www.rheintech.com M/N: 7410-02 APPENDIX G: Label and Label Location PHOTOGRAPH 1: LABEL LOCATION Please see the following page for a diagram of the FCC Identification Label. FCC ID LABEL HERE Rhein Tech Laboratories Report number: 2002180 360 Herndon Parkway FCC: Part 15.247 Suite 1400 Industry Canada: RSS-210 FCC ID: GU67410-02 Herndon, VA 20170 http://www.rheintech.com M/N: 7410-02 PHOTOGRAPH 2: SAMPLE FCC IDENTIFICATION LABEL

Rhein Tech Laboratories Report number: 2002180 360 Herndon Parkway FCC: Part 15.247 Suite 1400 Industry Canada: RSS-210 FCC ID: GU67410-02 Herndon, VA 20170 http://www.rheintech.com M/N: 7410-02 Page 59 of 83 APPENDIX M: INTERNAL PHOTOGRAPHS PHOTOGRAPH 9: MAIN PRINTER CONTROL BOARD REMOVED, DC POWER SUPPLY PCB VISIBLE, CABLE TO RIGHT ANGLE ANTENNA Rhein Tech Laboratories Report number: 2002180 360 Herndon Parkway FCC: Part 15.247 Suite 1400 Industry Canada: RSS-210 FCC ID: GU67410-02 Herndon, VA 20170 http://www.rheintech.com M/N: 7410-02 Page 60 of 83 PHOTOGRAPH 10: MOUNTED MAIN PCB WITH PRINT SERVER CONNECTOR Rhein Tech Laboratories Report number: 2002180 360 Herndon Parkway FCC: Part 15.247 Suite 1400 Industry Canada: RSS-210 FCC ID: GU67410-02 Herndon, VA 20170 http://www.rheintech.com M/N: 7410-02 Page 61 of 83 PHOTOGRAPH 11: PRINT SERVER AND KEYPAD REMOVED Rhein Tech Laboratories Report number: 2002180 360 Herndon Parkway FCC: Part 15.247 Suite 1400 Industry Canada: RSS-210 FCC ID: GU67410-02 Herndon, VA 20170 http://www.rheintech.com M/N: 7410-02 Page 62 of 83 PHOTOGRAPH 12: PRINT SERVER PLUGGED INTO MOUNTED MAIN PCB WITH CABLE TO RIGHT ANGLE ANTENNA Rhein Tech Laboratories Report number: 2002180 360 Herndon Parkway FCC: Part 15.247 Suite 1400 Industry Canada: RSS-210 FCC ID: GU67410-02 Herndon, VA 20170 http://www.rheintech.com M/N: 7410-02 Page 63 of 83 PHOTOGRAPH 13: PRINT SERVER AND WLAN CARD MOUNTED IN PLACE WITH CABLE TO RIGHT ANGLE ANTENNA Rhein Tech Laboratories Report number: 2002180 360 Herndon Parkway FCC: Part 15.247 Suite 1400 Industry Canada: RSS-210 FCC ID: GU67410-02 Herndon, VA 20170 http://www.rheintech.com M/N: 7410-02 Page 64 of 83 PHOTOGRAPH 14: MAIN PRINTER SYSTEM CONTROL BOARD WITH CONNECTOR WHERE PRINT SERVER PLUGS IN Rhein Tech Laboratories Report number: 2002180 360 Herndon Parkway FCC: Part 15.247 Suite 1400 Industry Canada: RSS-210 FCC ID: GU67410-02 Herndon, VA 20170 http://www.rheintech.com M/N: 7410-02 Page 65 of 83 PHOTOGRAPH 15: MAIN PRINTER SYSTEM CONTROL BOARD BACK VIEW Rhein Tech Laboratories Report number: 2002180 360 Herndon Parkway FCC: Part 15.247 Suite 1400 Industry Canada: RSS-210 FCC ID: GU67410-02 Herndon, VA 20170 http://www.rheintech.com M/N: 7410-02 Page 66 of 83 PHOTOGRAPH 16: PRINT SERVER TOP VIEW Rhein Tech Laboratories Report number: 2002180 360 Herndon Parkway FCC: Part 15.247 Suite 1400 Industry Canada: RSS-210 FCC ID: GU67410-02 Herndon, VA 20170 http://www.rheintech.com M/N: 7410-02 Page 67 of 83 PHOTOGRAPH 17: PRINT SERVER REAR VIEW Rhein Tech Laboratories Report number: 2002180 360 Herndon Parkway FCC: Part 15.247 Suite 1400 Industry Canada: RSS-210 FCC ID: GU67410-02 Herndon, VA 20170 http://www.rheintech.com M/N: 7410-02 Page 68 of 83 PHOTOGRAPH 18: PRINT SERVER MOUNTING ADAPTER PCB

Rhein Tech Laboratories Report number: 2002180 360 Herndon Parkway FCC: Part 15.247 Suite 1400 Industry Canada: RSS-210 FCC ID: GU67410-02 Herndon, VA 20170 http://www.rheintech.com M/N: 7410-02 Page 69 of 83 PHOTOGRAPH 19: PRINT SERVER PCB FRONT Rhein Tech Laboratories Report number: 2002180 360 Herndon Parkway FCC: Part 15.247 Suite 1400 Industry Canada: RSS-210 FCC ID: GU67410-02 Herndon, VA 20170 http://www.rheintech.com M/N: 7410-02 Page 70 of 83 PHOTOGRAPH 20: PRINT SERVER PCB BACK VIEW WITH WLAN PCMCIA CARD AND PCB MOUNTING ADAPTER REMOVED Rhein Tech Laboratories Report number: 2002180 360 Herndon Parkway FCC: Part 15.247 Suite 1400 Industry Canada: RSS-210 FCC ID: GU67410-02 Herndon, VA 20170 http://www.rheintech.com M/N: 7410-02 Page 71 of 83 PHOTOGRAPH 21: COMPLETE PRINT SERVER REAR VIEW WITH WLAN CARD REMOVED Rhein Tech Laboratories Report number: 2002180 360 Herndon Parkway FCC: Part 15.247 Suite 1400 Industry Canada: RSS-210 FCC ID: GU67410-02 Herndon, VA 20170 http://www.rheintech.com M/N: 7410-02 Page 72 of 83 PHOTOGRAPH 22: WLAN CARD TOP VIEW Rhein Tech Laboratories Report number: 2002180 360 Herndon Parkway FCC: Part 15.247 Suite 1400 Industry Canada: RSS-210 FCC ID: GU67410-02 Herndon, VA 20170 http://www.rheintech.com M/N: 7410-02 Page 73 of 83 PHOTOGRAPH 23: WLAN CARD REAR VIEW Rhein Tech Laboratories Report number: 2002180 360 Herndon Parkway FCC: Part 15.247 Suite 1400 Industry Canada: RSS-210 FCC ID: GU67410-02 Herndon, VA 20170 http://www.rheintech.com M/N: 7410-02 Page 74 of 83 PHOTOGRAPH 24: WLAN CARD PCB FRONT WITH SHIELDS Rhein Tech Laboratories Report number: 2002180 360 Herndon Parkway FCC: Part 15.247 Suite 1400 Industry Canada: RSS-210 FCC ID: GU67410-02 Herndon, VA 20170 http://www.rheintech.com M/N: 7410-02 Page 75 of 83 PHOTOGRAPH 25: WLAN CARD PCB REAR Rhein Tech Laboratories Report number: 2002180 360 Herndon Parkway FCC: Part 15.247 Suite 1400 Industry Canada: RSS-210 FCC ID: GU67410-02 Herndon, VA 20170 http://www.rheintech.com M/N: 7410-02 Page 76 of 83 PHOTOGRAPH 26: WLAN CARD PCB FRONT WITHOUT SHIELDS Rhein Tech Laboratories Report number: 2002180 360 Herndon Parkway FCC: Part 15.247 Suite 1400 Industry Canada: RSS-210 FCC ID: GU67410-02 Herndon, VA 20170 http://www.rheintech.com M/N: 7410-02 Page 77 of 83 PHOTOGRAPH 27: KEYPAD BACK VIEW Rhein Tech Laboratories Report number: 2002180 360 Herndon Parkway FCC: Part 15.247 Suite 1400 Industry Canada: RSS-210 FCC ID: GU67410-02 Herndon, VA 20170 http://www.rheintech.com M/N: 7410-02 Page 78 of 83 PHOTOGRAPH 28: KEYPAD TOP VIEW Rhein Tech Laboratories Report number: 2002180 360 Herndon Parkway FCC: Part 15.247 Suite 1400 Industry Canada: RSS-210 FCC ID: GU67410-02 Herndon, VA 20170 http://www.rheintech.com M/N: 7410-02 Page 79 of 83 PHOTOGRAPH 29: PRINTER CIRCUIT BOARD WITH SEMI-CONDUCTORS (TOP RIGHT CORNER OF PCB)

Rhein Tech Laboratories Report number: 2002180 360 Herndon Parkway FCC: Part 15.247 Suite 1400 Industry Canada: RSS-210 FCC ID: GU67410-02 Herndon, VA 20170 http://www.rheintech.com M/N: 7410-02 Top View PCMCIA Card Without Shields

Rhein Tech Laboratories Report number: 2002180 360 Herndon Parkway FCC: Part 15.247 Suite 1400 Industry Canada: RSS-210 FCC ID: GU67410-02 Herndon, VA 20170 http://www.rheintech.com M/N: 7410-02 Page 43 of 83 APPENDIX B: ANTENNA SPECIFICATIONS Please refer to the following pages. 93 An ISO-9001 Registered Company Portable Duck Antennas for WLAN 902 MHz and 2.4 GHz ISM Portable Antenna Series The MAXRAD portable antennas are designed to cover the band of frequencies from 902-928 MHz ISM and 2.400 to 2.4835 GHz ISM with a VSWR of less than 1.5:1 at resonance. Their rugged, flexible design makes them suitable for use in a wide variety of applications, including office LAN environments, factory floors, remote telemetry and other harsh environments. Features and Benefits: Ground plane independent, half-wave coaxial dipole design. Provides improved antenna performance, higher gain and installation flexibility. Flexible design. Added durability that allows use in demanding wireless environments. Articulating knuckle provides 0º-90º pivot and 180º swivel movement allow- ing vertical orientation of the antenna, regardless of the orientation or position of the wireless device. General Specifications: 902 MHz and 2.4 GHz ISM portable duck antennas Polarization: Linear, vertical Nominal Impedance: 50 Ohms 2.4 GHz ISM portable antennas are ideal for data collection applications in factories, retail estab- lishments, warehouses and office buildings. ORDER (800) 323-9122 FAX (630) 372-8077 www.maxrad.com Specifications Mechanical Specifications #ledoMegnaRycneuqerFycneuqerFhtgneLecnanoseRrewoPniaG CPR0042SWQMzHM5.3842-0042zHM0542evaw2/11:0.2<sttaW05iBd0 AMSM0042SWHMzHM5.3842-0042zHM0542evaw2/11:5.1<sttaW05iBd0.2 C0042SWHMzHM5.3842-0042zHM0542evaw2/11:5.1<sttaW05iBd0.2 PRAMSM0042SWHMzHM5.3842-0042zHM0542evaw2/11:5.1<sttaW05iBd0.2 TRAMSM0042SWHMzHM5.3842-0042zHM0542evaw2/11:5.1<sttaW05iBd0.2 PRCNTM0042SWHMzHM5.3842-0042zHM0542evaw2/11:5.1<sttaW05iBd0.2 NBPR0042SWHMzHM5.3842-0042zHM0542evaw2/11:5.1<sttaW05iBd0.2 C0581SWHMzHM0991-0171zHG8.1evaw2/11:5.1<sttaW05iBd0.1 CPR209SWHMzHM829-209zHM519evaw2/11:5.1<sttaW05iBd0.2 MS209CXEMzHM069-209zHM519evaw4/11:5.1<sttaW05ytinu MS209EXEMzHM069-209zHM519evaw2/11:5.1<sttaW05iBd0.2 NT209EXEMzHM069-209zHM719evaw2/11:2<sttaW05iBd0.2 Electrical Specifications #ledoMepyTrotcennoCngiseDthgieHannetnA erutarepmeT egnaRserutaeFlaicepS CPR0042SWQMCNTytiraloPesreveRevaw2/1)mm6.101("0.4C°58+otC°04-elkcunk°09-°0,leviws°063 AMSM0042SWHMAMSelaMelopidlaixaoC)mm3.411("5.4C°58+otC°04-elkcunk°09-°0,leviws°063 C0042SWHMCNB/CNTelaMelopidlaixaoC)mm8.771("0.7C°58+otC°04-elkcunk°09-°0,leviws°063 PRAMSM0042SWHM gulPAMSytiraloPesreveRelopidlaixaoC)mm3.411("5.4C°58+otC°04-elkcunk°09-°0,leviws°063 TRAMSM0042SWHM gulPAMSdedaerhTesreveRelopidlaixaoC)mm3.411("5.4C°58+otC°04-elkcunk°09-°0,leviws°063 PRCNTM0042SWHMCNTytiraloPesreveRelopidlaixaoC)mm8.441("7.5C°58+otC°04-elkcunk°09-°0,leviws°063 NBPR0042SWHMgulPCNBytiraloPesreveRelopidlaixaoC)mm8.771("0.7C°58+otC°04-elkcunk°09-°0,leviws°063 C0581SWHMCNTelaMevaw2/1mm3.411("5.4C°58+otC°04-elkcunk°09-°0,leviws°063 CPR209SWHMCNTytiraloPesreveRelopidevaw2/1)mm0.452("01C°58+otC°04-elkcunk°09-°0,leviws°063 MS209CXEMAMSelaMevaw4/1)mm6.101("0.4C°58+otC°04- MS209EXEMAMSelaMelopidevaw2/1)mm2.302("0.8C°58+otC°04- NT209EXEMCNTelaMelopidevaw2/1)mm2.302("0.8C°58+otC°04- An ISO-9001 Registered Company 95 /ledoM epyTrotcennoC esreveR ytiralop gulpCNB elam,AMS esreveR dedaerht elam,AMS elaM,CNT esreveR ytiralop gulpCNT esreveR ytiraloP gulPAMS CPR0042SWQMX AMSM0042SWHMX C0042SWHMX PRAMSM0042SGHMX TRAMSM0042SGHMX PRCNTM0042SWHMX NBPR0042SWHMX CPR209SWHMX MS209CXEMX MS209EXEMX NT209EXEMX Connector Options Connector Options ORDER (800) 323-9122 FAX (630) 372-8077 www.maxrad.com

Rhein Tech Laboratories Report number: 2002180 360 Herndon Parkway FCC: Part 15.247 Suite 1400 Industry Canada: RSS-210 FCC ID: GU67410-02 Herndon, VA 20170 http://www.rheintech.com M/N: 7410-02 Page 40 of 83 APPENDIX A: MAXIMUM PERMISSIBLE EXPOSURE FCC RULES AND REGULATIONS PART 1.1307, 1.1310, 2.1091, 2.1093: RF EXPOSURE COMPLIANCE 1. GENERAL INFORMATION: • FCCID: GU67410-02 • Environment: General Population/Uncontrolled Exposure • Device category: Mobile per Part 2.1093 2. OPERATING CONFIGURATIONS AND TEST CONDITIONS: 2.1 ANTENNA TYPE(S): Antenna Type Gain (dBi) M AX R AD Duck -90º angle 2 3. OPERATING CONDITIONS: The 9850 is a wireless printer containing a PCMCIA card connected to a stub antenna to transmitin the frequency range 2412-2462 MHz, and the peak conducted and peak radiated (ERP) output power does not exceed 100 mW. 4. TEST SIGNAL, TIME-AVERAGING, MAX. MEASURED OUTPUT POWER: Modulation Type/Modes: DSSS Frequency Range Freq. Tolerance (ppm) Emission Designator 2412-2462 MHz N/A N/A Output Power (Watt/dBm) High (Watt) High (dBm) Time averaging (__% Duty Cycle) ERP N/A N/A N/A Conducted 0.037 15.68 N/A Rhein Tech Laboratories Report number: 2002180 360 Herndon Parkway FCC: Part 15.247 Suite 1400 Industry Canada: RSS-210 FCC ID: GU67410-02 Herndon, VA 20170 http://www.rheintech.com M/N: 7410-02 Page 41 of 83 From FCC 1.1310 table 1A, the maximum permissible RF exposure for an uncontrolled environment is…

Text truncated - open the document above for the full version.