GU69460IPLA3021Wireless Printer

Rhein Tech Laboratories Client: Paxar Americas, Inc. 360 Herndon Parkway FCC: Part 15.247 Suite 1400 Industry Canada: RSS-210 FCC ID: GU69460IPLA3021 Herndon, VA 20170 http://www.rheintech.com Model #: 9460IP Page 48 of 83 APPENDIX J: MANUAL Please refer to the following pages for the Paxar 9460IP and the Symbol Technologies LA-3021 manuals. Monarch  9460  Printer TC9460OH Rev. AC 2/01 ©2001 Monarch Marking Systems, Inc. All rights reserved. Each product and program carries a respective written warranty, the only warranty on which the customer can rely. Monarch reserves the right to make changes in the product, the programs, and their availability at any time and without notice. Although Monarch has made every effort to provide complete and accurate information in this manual, Monarch shall not be liable for any omissions or inaccuracies. Any update will be incorporated in a later edition of this manual. ©2001 Monarch Marking Systems, Inc. All rights reserved. No part of this publication may be reproduced, transmitted, stored in a retrieval system, or translated into any language in any form by any means, without the prior written permission of Monarch Marking Systems, Inc. WARNING This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. RF Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference including interference that may cause undesired operation of the device. CANADIAN D.O.C. WARNING This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la classe A prescrites dans le Réglement sur le brouillage radioélectrique édicte par le ministère des Communications du Canada. Trademarks Monarch is a registered trademark of Monarch Marking Systems, Inc. 9460, 9461, 9463, 9464, MPCL, and Sierra Sport2 are trademarks of Monarch Marking Systems, Inc. Paxar is a trademark of Paxar Corporation. Adobe and Acrobat are registered trademarks of Adobe Systems Incorporated. Monarch Marking Systems 170 Monarch Lane Miamisburg, Ohio 45342 TABLE OF CONTENTS GETTING STARTED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Audience. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Printer Utilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Unpacking the Printer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Powering the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Installing the Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Battery and Safety Information . . . . . . . . . . . . . . . . . . . 1-5 Connecting the Communications Cable. . . . . . . . . . . . . . . . . . . . 1-6 Using the Display and Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8 Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8 LOADING SUPPLIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 Loading for Non-Peel Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 Tearing the Supplies. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3 Loading for Peel Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4 CARE & MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 Clearing Label Jams. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4 TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 Common Errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1 Printer Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1 Supply Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2 Cable Pin-outs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2 Table of Contents i ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1 Single Station Battery Charger . . . . . . . . . . . . . . . . . . . . . . . . . . B-2 Four Station Battery Charger. . . . . . . . . . . . . . . . . . . . . . . . . . . . B-2 AC Power Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-2 Carrying Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-3 PRINTER OPTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-1 IRDA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-1 …

Text truncated - open the document above for the full version.

TC9460SM Rev AB 05/00 ©2000 Monarch Marking Systems, Inc. All rights reserved. Monarch  9460 Printer Each product and program carries a respective written warranty, the only warranty on which the customer can rely. Monarch reserves the right to make changes in the product, the programs, and their availability at any time and without notice. Although Monarch has made every effort to provide complete and accurate information in this manual, Monarch shall not be liable for any omissions or inaccuracies. Any update will be incorporated in a later edition of this manual. ©2000 Monarch Marking Systems, Inc. All rights reserved. No part of this publication may be reproduced, transmitted, stored in a retrieval system, or translated into any language in any form by any means, without the prior written permission of Monarch Marking Systems, Inc. WARNING This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. CANADIAN D.O.C. WARNING This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la classe A prescrites dans le Réglement sur le brouillage radioélectrique édicte par le ministère des Communications du Canada. Trademarks Monarch is a registered trademark of Monarch Marking Systems, Inc. Monarch, 917, 9403, 9800, 9805, 9820, 9830, 9835, 9840, and 9856 are trademarks of Monarch Marking Systems, Inc. Paxar is a trademark of Paxar Corporation. Microsoft and MS-DOS are registered trademarks of Microsoft in the U.S. and other countries. Windows is a registered trademark of Microsoft in the U.S. and other countries. TrueType is a trademark of Apple Computer, Inc. Hewlett-Packard is a registered trademark of Hewlett-Packard Company. CG Triumvirate and CG Triumvirate Bold are trademarks of AGFA Corporation. Adobe and Acrobat are trademarks of Adobe Systems Incorporated which may be registered in certain jurisdictions. Centronics is a registered trademark of Centronics Data Computer Corporation. Monarch Marking Systems P.O. Box 608 Dayton, Ohio 45401 Confidential January 2001 Page i SAFETY SUMMARY Warning and caution messages appear throughout this manual. They alert you to potential safety hazards or potential damage to equipment. The messages and their meanings are shown below. WARNING Calls attention to improper practices that could result in a potentially serious, even lethal injury. CAUTION Calls attention to practices that could cause minor injury or damage to equipment. Familiarize yourself with proper procedures before operating or repairing the equipment. Follow these precautions for your own safety and to protect the equipment. Equipment Safety Your body is a giant capacitor. It can store several thousand volts of electricity. Digital equipment is easily damaged or destroyed by this static electricity. You do not have to see a spark to ruin an IC; 50 volts is enough. To protect the equipment from static damage, follow these guidelines: Ground yourself before reaching into the equipment or touching any circuit board or other electrical component. The Monarch Static Ground Kit contains everything you need. Re-ground yourself whenever you walk away and return to the equipment. Be especially careful around carpet. Carpet is a major source of static buildup in the body. Even a few steps can recharge you. The smaller the object, the greater the precautions must be. A board in the machine is better protected than one that is not plugged in. A chip on a board is better protected than one in your hand. Avoid touching pins coming out of a chip or the connector edge of circuit boards. These metal parts have signal and data lines that are connected directly to fragile circuits. 9460 Service Manual Confidential Preface Page ii January 2001 Table of Contents Safety Summary i Chapter 1. Printer Overview & Installation 1 PURPOSE---------------------------------------------------------------------------------------------------------------------------------------------1 ELECTROSTATIC DISCHARGE---------------------------------------------------------------------------------------------------------------1 PUBLICATIONS--------------------------------------------------------------------------------------------------------------------------------------1 EQUIPMENT DESCRIPTION--------------------------------------------------------------------------------------------------------------------1 EQUIPMENT SPECIFICATIONS---------------------------------------------------------------------------------------------------------------2 Bar Codes-------------------------------------------------------------------------------------------------------------------------------------------2 Additional Specifications----------------------------------------------------------------------------------------------------------------------2 INSTALLATION AND CHECKOUT PROCEDURES-------------------------------------------------------------------------------------3 Printer Checkout----------------------------------------------------------------------------------------------------------------------------------3 Communications Interface---------------------------------------------------…

Text truncated - open the document above for the full version.

†’€i‚yp‚€ Tƒrp‡…ˆ€!# Xv…ryr††G6I6qhƒ‡r… H‚qry†G6"! Q88h…q G6"!%DT66qhƒ‡r… Q…‚qˆp‡Srsr…rprBˆvqr DIAXG6I Sr‰v†v‚6 Trƒ‡r€ir…! vvTƒrp‡…ˆ€!#
Xv…ryr††
G6I
6qhƒ‡r…
Q…‚qˆp‡
Srsr…rpr
Bˆvqr 8‚ƒ’…vtu‡ &RS\ULJKW‹  E\6\PERO7HFKQR ORJLHV ,QF$OOULJKWVUHV HUYHG 6\P ER OWKH6\P ER OORJRDQG6SHF WUX P DUHUHJLVWHUHGWUDGHPDUNVRI 6\PERO 7HF KQR ORJLHV,QF  1R SD UWRI WKLV SXEOLF DWLR QPD \EHPRGLI LHGRUD GD SWHGL QD Q\ZD\I RUD Q\SXUSR VHVZLWKR XWSHUPLV VLRQLQ ZULWLQJI UR P6\P ER O7 KHPD WHULDO LQWKLVPD QXDOLV V XEMHF WWR FKDQJHZLWKRXWQRWLF H 6\P ER OUHVHUY HVWKHUL JKWWRPD NHFKDQJHV WR DQ\SURGXFWWR LP SURY HUHO LDELOLW\IX QFWLR QRUGHVLJQ 1R OLFHQVHLVJUDQWHGHLWKHUH[SUHV VO\RUE\LPSOLF DWLR QHVWRSSHORUR WKHUZLVHX QGHUD Q\6\PERO7HF KQR ORJLHV ,QF  LQWHOO HF WXDOSUR SHUW\ULJKWV $QLPSOLHGOLF HQV HRQO\H[L VWVIR UHTX LSP HQWFLUFX LWVD QGVX EV \VWHPVFR QWDLQHGLQ 6\P ER OSURGXF WV 2WKHUSUR GXF WQD PHVPHQWLRQHGLQWKLVPD QXDOP D\EHWUD GHPD UNVRUUHJL VWHUHGWUDGHP DUNV R IWKHL UUHVSHFWLY H FR PSDQLHVDQGD UHKHUHE\DF NQR ZOHGJHG 1R YHOODQG/$ 1:RUNSOD FHDUHUHJLVWHUHGWUDGHPDUNVRI1RY HOO,QF  Qh‡r‡† 7KLVSUR GX FWLVFR YHUHGE\RQHR UP RUHRI WKHIR OORZLQJ86D QGIR UHLJQ3DWHQWV 863D WHQW1R                                                                                                                                                                                                                                                                                                                                                                                                                                                                                     '   '   '   '   '    '   '   '   '   '   '   '   '    '   '    ,QYHQWL RQ1R            7D LZDQ 1R           -D SD Q  (XURSHD Q3DWHQW         8.    )UD QF H    ,WDO\     6\PERO7HFKQRORJLHV,QF 2QH6\PERO3OD]D +ROWVYLOOH1< 7HOHSKRQH  6&$1   Tƒrp‡…ˆ€!#
Xv…ryr††
G6I
6qhƒ‡r…
Q…‚qˆp‡
Srsr…rpr
Bˆvqrvvv 6i‚ˆ‡Uuv†9‚pˆ€r‡ Srsr…rpr
9‚pˆ€r‡† Uuv†
Srsr…rpr
Bˆvqr
…rsr…†
‡‚
‡ur
s‚yy‚vt
q‚pˆ€r‡†)
8‚‰r‡v‚† Fr’†‡…‚xr†
h…r
vqvph‡rq
h†
s‚yy‚†)
U’ƒrshpr
p‚‰r‡v‚†
ˆ†rq
vpyˆqr) Qh…‡Iˆ€ir… 9‚pˆ€r‡Uv‡yr DIATT Tƒrp‡…ˆ€!#
Tv‡r
Tˆ…‰r’
T’†‡r€
6q€vv†‡…h‡‚…†
Bˆvqr DIAV6Q Tƒrp‡…ˆ€!#
6Q"! 6ppr††
Q‚v‡
Q…‚qˆp‡ Srsr…rpr
Bˆvqr
DIAACQQ Tƒrp‡…ˆ€!#
AC
Qyˆ†
Qhpx
V†r…
Bˆvqr @IU@S
vqr‡vsvr†
h
xr’ )81&
&75/
&vqr‡vsvr†
h
xr’
†r„ˆrpr
Q…r††
hq
…ryrh†r
rhpu
xr’
v
‡ˆ…
Q…r††
$%ƒ…r††
‡ur
vqvph‡rq
xr’†
†v€ˆy‡hr‚ˆ†y’ C‚yq
$%ƒ…r††
hq
u‚yq
‡ur
vqvph‡rq
xr’†
uvyr
ƒr…s‚…€vt
‚…
hv‡vt
s‚…
h‚‡ur…
sˆp‡v‚
V†rq
v
p‚€ivh‡v‚
v‡u
h‚‡ur…
xr’†‡…‚xr 1htyr†3 vqvph‡r†
€hqh‡‚…’
ƒh…h€r‡r…†
v
h
tv‰r
†’‡h‘ bi…hpxr‡†d s‚…
p‚€€hq
yvr
vqvph‡r†
h‰hvyhiyr
ƒh…h€r‡r…†0 v
p‚svtˆ…h‡v‚
svyr†
i…hpxr‡†
hp‡
h†
†rƒh…h‡‚…† s‚…
‚ƒ‡v‚† BVDTp…rr‡r‘‡vqvph‡r†
‡ur
p‚‡…‚y
h€r
v
h
BVDih†rq
hƒƒyvph‡v‚ D‡hyvp†vqvph‡r†
‡ur
sv…†‡
ˆ†r
‚s
h
‡r…€
i‚‚x
‡v‡yr
‚…
€rˆ :†vtyr
„ˆ‚‡r†; vqvph‡r†
‡ur
r‘hp‡
†r‡‡vt
s‚…
h
ƒh…h€r‡r… v‰Tƒrp‡…ˆ€!#
Xv…ryr††
G6I
6qhƒ‡r…
Q…‚qˆp‡
Srsr…rpr
Bˆvqr Uuv†
q‚pˆ€r‡
ˆ†r†
‡ur
s‚yy‚vt
vp‚†
s‚…
pr…‡hv
p‚qv‡v‚†
‚…
‡’ƒr† ‚s
vs‚…€h‡v‚) Dqvph‡r†
‡vƒ†
‚…
†ƒrpvhy
…r„ˆv…r€r‡† Dqvph‡r†
p‚qv‡v‚†
‡uh‡
ph
phˆ†r
r„ˆvƒ€r‡
qh€htr
‚…
qh‡h
y‚†† Dqvph‡r†
h
ƒ‚‡r‡vhyy’
qhtr…‚ˆ†
p‚qv‡v‚
‚…
ƒ…‚prqˆ…r
‡uh‡
‚y’
T’€i‚y‡…hvrq
ƒr…†‚ry
†u‚ˆyq
h‡‡r€ƒ‡
‡‚
p‚……rp‡
‚…
ƒr…s‚…€ Screen vqvph‡r†
€‚v‡‚…
†p…rr
qvhy‚t
6y†‚
vqvph‡r† ˆ†r…
vƒˆ‡ 6†p…rr
v†
‡ur
uh…qh…r
qr‰vpr
‚
uvpu qh‡h
hƒƒrh…† 6
qv†ƒyh’
v†
qh‡h
h……htrq
‚
h
†p…rr Terminal vqvph‡r†
‡r‘‡
†u‚
‚
h
‡r…€vhy
†p…rr VSG vqvph‡r†
Vvs‚…€
Sr†‚ˆ…pr
G‚ph‡‚…
8yvpx
‡ur
VSG ‡‚
yhˆpu
i…‚†r… 8‚‡r‡† Tƒrp‡…ˆ€!#
Xv…ryr††
G6I
6qhƒ‡r…
Q…‚qˆp‡
Srsr…rpr
Bˆvqr
‰ 8uhƒ‡r… D‡…‚qˆp‡v‚ 8uhƒ‡r…! 6i‚ˆ‡‡urTƒrp‡…ˆ€!#Xv…ryr†† G6I6qhƒ‡r… " !
HV
H‚qr# !!
Hvp…‚6Q
H‚qr$ !"

hq
!
HiĠ
Pƒr…h‡v‚…

Text truncated - open the document above for the full version.

TC9460IPAD Rev. AA 7/02 2002 Paxar Corporation. All rights reserved. MONARCH is a registered trademark of Monarch Marking Systems, Inc. Sierra Sport and 9460 are trademarks of Monarch Marking Systems, Inc. Paxar is a trademark of Paxar Corporation. CONFIGURING YOUR IP PRINTER Use these instructions to configure the radio inside your MONARCH Sierra Sport  2 IP Printer. The IP printer operates on any WiFi (Wireless Fidelity) compatible 802.11b RF network. Make sure your access point and network are correctly set up. Refer to your network manuals for more information. This manual does not include information about setting up your RF network. Refer to the printer’s Quick Reference for information about loading supplies, etc. Installing the Configuration Utility Download the Configuration Utility from our Web site (www.monarch.com/service/service_utilities.htm). This utility supports the following platforms: Microsoft  Windows 98/2000/ME and Windows NT (SP3+). If using WinPCap version 2.3 or greater, Microsoft Windows XP and 95 are supported. Follow the instructions provided. Read readme.txt for updates and more information. After installing the Configuration Utility, you can set up the printer using a serial cable or by using your network. For initial printer setup, you must use the serial interface. About the Configuration Utility This utility allows you to easily configure your IP printer. 1. Start the Configuration Utility. 2. Click Features List to see a list of supported radios. 3. Click Ok when finished. 4. Click About/Disclaimer to see the version number of the Utility. 5. Click Ok when finished. 6. Click Exit to exit the Utility. 2 Selecting the Printer Using a Serial Interface Before you can use the IP printer, you must configure it. All nodes of a wireless network need to have the same settings in order to communicate with each other. For initial printer setup, you must use the serial interface. 1. Connect a serial cable (DB9 female to DB9 female all lines wired straight through) from the host or PC to the printer’s radio harness. 2. Turn on the printer. 3. Start the Configuration Utility. Depending on the Configuration Utility’s version, the screens may appear differently. 4. Select Serial, direct to card. Radio Harness 3 5. Click Configure Interface. 6. Make sure you select the correct communication port and 19.2 Baud Rate (19.2 is the only supported baud rate). 7. Click Ok. 8. Click Discover. Since you are connected through a serial interface, only one printer appears. The Card History Window appears at the bottom of the screen to give a status of the connected printers. For example, you may see a message “Card Discovered” when an IP printer is discovered by the Configuration Utility. Messages also appear when printers are turned off or disconnected from the network. You can highlight a printer and Clear Current Card’s History or Clear All Card Histories. 4 9. Highlight the printer to configure and click Config. A CAUTION window appears. Read all the information. You can disable the CAUTION window for this session or permanently. Click Ok to continue. 10. Follow the steps in “Configuring the RF Interface.” Selecting the Printer Using a Network Interface Follow these steps to select a printer using a network interface or to verify printers on a network. 1. Turn on the printer. 2. Start the Configuration Utility. 3. Select Network. 4. Click Discover. Since you are connected through a network interface, multiple printers may appear. The Card History Window appears at the bottom of the screen to give a status of the connected printers. For example, you may see a message “Card Discovered” when an IP printer is discovered by the Configuration Utility. Messages also appear when printers are turned off or disconnected from the network. You can highlight a printer and Clear Current Card’s History or Clear All Card Histories. 5 5. If necessary, click Configure Interface to check the network devices available on the host. 6. Make any changes and click Ok when finished or click Cancel to exit without saving any changes. You return to the Main screen. 7. Highlight the printer you want to configure and click Config. A CAUTION window appears. Read all the information. You can disable the CAUTION window for this session or permanently. Click Ok to continue. 8. Follow the steps in “Configuring the RF Interface.” 6 Configuring the RF Interface Setting a Name and ESS ID 1. Enter a Unit Name. Use a meaningful name, for example, WHSEFLR. 2. Enter the 802.11b ESS ID. NOTE: The ESS ID address is case-sensitive. 3. Enter a valid address for the Remote IP (even if you are not using the remote IP). Setting the Protocol for Listen Mode Listen mode waits for a host to connect to the specified port and receives data. Listen mode can be used with TCP (select port number) or LPD (no need to specify port) protocols. 1. Select the Protocol as TCP or LPD. Do not use UDP. 2. Select the Connection Mode as Listen. 3. Select the Port. Setting the Protocol for Call Remote Mode Call remote mode initiates the data transfer. Call remote can be used for TCP (select port number) or Telnet (no need to specify port) protocols. 1. Select the Protocol as TCP or Telnet from the Card Configuration screen. Do not use UDP. 2. Select the Connection Mode as Call Remote. 3. Specify the Remote IP Address. 4. Select the Port. 5. Enter the amount of Retries in milliseconds after a failure before a connection is tried again. 7 Setting the Power Save Mode 1. Select the Power Save mode by checking the Enable box from the Card Configuration screen. 2. Set the Algorithm to a value between 1 and 10. 1 is the shortest sleep time (uses battery power quicker, but responds faster); 10 is the longest sleep time (optimal battery conservation, but responds slower). If the Power Save mode is not enabled, the device operates in CAM mode (constantly awake). CAM means the printer is continuously receiving and transmitting data. This mode uses b…

Text truncated - open the document above for the full version.

Rhein Tech Laboratories Client: Paxar Americas, Inc. 360 Herndon Parkway FCC: Part 15.247 Suite 1400 Industry Canada: RSS-210 FCC ID: GU69460IPLA3021 Herndon, VA 20170 http://www.rheintech.com Model #: 9460IP Page 42 of 83 APPENDIX E: CONFIDENTIALITY REQUEST LETTER Please refer to the following page.

Rhein Tech Laboratories Client: Paxar Americas, Inc. 360 Herndon Parkway FCC: Part 15.247 Suite 1400 Industry Canada: RSS-210 FCC ID: GU69460IPLA3021 Herndon, VA 20170 http://www.rheintech.com Model #: 9460IP Page 41 of 83 APPENDIX D: AGENCY AUTHORIZATION LETTER Please refer to the following page.     03/06/2003 American TCB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern: Please be advised that Paxar Americas, Inc. hereby authorizes Rhein Tech Laboratories, Inc. (RTL), 360 Herndon Parkway, Suite 1400, Herndon, VA 20170 to act on our behalf, until otherwise notified, for applications submitted to American Telecommunications Certification Body, Inc. (ATCB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002(b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you for your attention to this matter. James A. Bacher Senior Engineer Paxar Americas, Inc 170 Monarch Lane Miamisburg, Ohio 453452 1-937-865-2123 1-937-865-2048 [email protected]

    April 17, 2003 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern: Our user's manual applies to both the Class A non-wireless and the wireless versions of our printer (Models 9460 and 9460IP, respectively). The AC adapter (Model 9463) that appears in the manual does not meet the requirements of FCC 15.207 for wireless devices such as the 9460IP, though it does meet the requirements of FCC 15.107 for the 9460. Therefore, Paxar will not sell, nor offer for sale, the AC adapter (Model 9463) with the 9460IP wireless printer. The 9460IP will have a barrier added that will prevent the AC Adapter from being used with the 9460IP. It will be internal and glued into place to prevent it's removal. Sincerely, James Bacher Senior Electrical Engineer 170 Monarch Lane Miamisburg, Ohio 453452 1-937-865-2020 1-937-865-2048 [email protected] CC: Amanda Mcguffin Mitch Stern Don Morrison Hugh Dayton Rheintech Labs

American Telecommunications Certification Body Inc. 6731 Whittier Ave, McLean, VA 22101 April 15, 2003 RE: FCC ID: GU69460IPLA3021 Attention: Kathy Grzovic / Desmond A. Fraser I have a few comments on this Application. 1. Your conducted power level listed on page 3 of the report does not match other power values (i.e. SAR report and page 29 of the report). The stated value on that page is 0.0112 W or 11.2mW (10.5dBm), however, the SAR report and other places list the power as 112mW (20.5dBm). Please correct power levels to be consistent and to reflect the proper values measured. 2. Please note that ANSI C63.4 states, “All instruments that can have a significant effect on the accuracy or validity of measurements made as specified in this standard shall be calibrated in accordance with the manufacturers recommendations and the instrument requirements of ANSI C63.2-1996.” Table 6.1 “RADIATED SPURIOUS EMISSIONS TEST EQUIPMENT” shows a number of pieces of equipment as verified. These equipment types “have a significant effect on the accuracy or validity of measurements.” Please verify that only calibrated measurement equipment was used during final measurements. Please provide evidence of this fact. If calibrated equipment was not used as required by ANSI C63.4, please retest using calibrated equipment. 3. Please note that the notch filter listed on page 30 of the report may have significant effect on the restricted band frequencies just above and below the 2.4 GHz ISM band used. As such this equipment is subject to calibration. You have listed the test equipment as only being verified. Please provide calibration dates for this equipment. Alternately, please justify why the equipment has not been calibrated but only verified; and why the use of non-calibrated equipment should be allowed. 4. The attestation letter stating the AC adapter used with the non-wireless printer will not be used with the wireless printer does not state that other AC adapters can or cannot be used. How does the manufacturer prevent the use of AC adapters in the wireless version of the printer? Are the batteries rechargeable? If so, do they have to be removed from the printer to be charged? If they can be charged in the unit, can the unit be operational (printing) in the charge mode? If the manufacturer does not prevent the use of AC adapters in this version, and if the use of such adapters can be used during normal printing operation of this device, please provide conducted emissions passing data for an AC adapter showing that this device is capable of compliance to conducted emissions limits. If an AC adapter is not provided, but an AC adapter can be used with the wireless version, please provided passing conducted data of an AC adapter for the wireless version. Alternately, please explain why conducted emissions is not required for this unit. 5. FYI – no action needed. Please note that a 22 GHZ span is far too great to make reliable measurements accurately. When measuring antenna conducted spurs a significantly smaller span produces more reliable data. Dennis Ward mailto:[email protected] The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information may result in application termination. Correspondence should be considered part of the permanent submission and may be viewed from the Internet after a Grant of Equipment Authorization is issued. z Page 2 April 15, 2003 Please do …

Text truncated - open the document above for the full version.