HAP91252T4949 MHz Radio Transmitter

ON/OFF 9V To recharge the battery pack 6V Ni- Cd rechar ge a ble th e batter y pa c k 6V N i - C d r echar geabl e t he b at t er y pack 6V N i - C d r echar geabl e t he b at t er y pack ROAD SHOCKER ROAD SHOCKER ITEM: 91252 PRINTED IN CHINA © 2003 ECHO TOYS LTD. ALL RIGHTS RESERVED. ROOM 1108, PENINSULA CENTRE, 67 MODY ROAD, TSIM SHA TSUI EAST, KOWLOON, HONG KONG. WEB SITE: http://www.echotoys.com.hk 1:18 SCALE OPERATING INSTRUCTIONS Please read carefully before starting to operate. It is recommended to operate the Road Shocker under the adult supervision. Cannot play or race 2 cars together in the same frequency. FEATURES 7 Functions-runs forward and backward, turns left and right, stops. BATTERY REQUIREMENT 1) One "9V" battery for the transmitter. 2) One "6V" rechargeable Ni-Cd battery pack for the Road Shocker. 3) The battery, battery pack and charger included. BATTERY INSTALLATION (A) TRANSMITTER 1) Slide ON/OFF to OFF. 2) Press and pull the battery compartment cover in the direction of the arrow to remove it. 3) Put the "9V" battery in the compartment according to the polarity symbols (+ and -) marked inside. 4) Replace the battery door. (B) ROAD SHOCKER 1) Make sure the battery pack has been fully charged. 2) Slide ON/OFF to OFF. 3) Use a coin to turn the battery door stopper and remove the battery door. 4) Insert the battery pack into the battery compartment. 5) Replace the battery door and use a coin to turn the stopper back. HOW TO OPERATE 1) Slide ON/OFF on the bottom of the Road Shocker to ON. 2) Slide ON/OFF on the transmitter to ON. 3) Use the transmitter's levers to control the movement and direction of the Road Shocker. Left Control Lever Push forward to move forward. Pull backward to move backward. Release to stop. Right Control Lever Push left to turn left. Push right to turn right. Release to go straight. TRIM CONTROL SWITCH Trim control switch is located on the underside of the Road Shocher between its front tires. It is used to align the wheels of the Road Shocker for consistent turning and driving. Move the switch left or right until desire alignment is reached. BATTERY CHARGING NOTE: Follow the instruction on the 6V rechargeable Ni- Cd battery pack and charger system. 1) The 6V rechargeable Ni-Cd battery pack must be charged prior to use. 2) When charging the battery pack, plug the charger into a household outlet. Connect the charger with the battery pack. 3) 4 hours is all that required for fully charging the battery pack, charging the battery pack for more than 4 hours will not prolong the running time. 4) When the Road Shocker begins to move slowly or not at all, It time to recharge the battery pack. 5) After use, the battery pack will be hot. Wait at least 10 minutes until it cools down before charging it. Recharging a hot battery pack will reduce its recharging life greatly. CAUTION Do not charge battery packs that show leakage or corrosion. Do not charge hot battery packs. Do not dispose battery packs of fire. Do not attempt to disassemble battery packs. THE FCC WANTS YOU TO KNOW NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the User's authority to operate the equipment.

PDF 文件以 "FinePrint pdfFactory Pro" 试用版创建 http://www.pdffactory.com

FCC ID Location FCC ID Sample

Model No: 91252-49.860MHz CIRCUIT DESCRIPTION In transmitter, press the Forward, Backward,Left or Right, output IC1 pin 8 supply encoding signal. Q1 & X1 is a crystal oscillator of 49.860MHz frequency. Q2 is a modulator. Output of Q2 drives the transformer L3. The antenna is coupled to the modulator by the transformer. In receiver L1 is tuning 49.860MHz frequency. And Q1 is a RF amplifier and detector stage. IC1 is a signal amplifier and decoder, it controls the output of IC1 pin6, 7 and pin11, 12. Q2, Q3, Q10 and Q11 are regulator. Q12, Q13, Q14, Q15 are Forward And Backward motor driver, and Q4, Q5, Q6, Q7 are Left And Right motor driver. ANTENNA AND GROUND CIRCUITRY This unit makes use of an external flexible 17 centimeters long antenna. The antenna is inductively coupled. The unit relies on the ground tract of the printed circuit board. No external ground is provided. Energy is supplied a 9-volt battery. 写字楼及陈列室 OFFICE & SHOWROOM 香港九龙尖沙咀东部么地道67号半岛中心1108室 ROOM 1108 PENINSULA CENTRE 67 MODY ROAD TSIM SHA TSUI EAST KOWLOON HONG KONG. TEL: 852 2723 8038 FAX 852 2665 4068 E-MAIL ADDRESS: [email protected] PDF 文件以 "FinePrint pdfFactory Pro" 试用版创建 http://www.pdffactory.com

PDF 文件以 "FinePrint pdfFactory Pro" 试用版创建 http://www.pdffactory.com

Report No.: 03.03.0241E-1 Page: 1 of 10 FCC ID: HAP91252T49 Authorized Signature: Kent Hsu Laboratory Manager SGS-CSTC Co.,Ltd. This report refers to the General Conditions for Inspection and Testing Services, printed overleaf This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the SGS PRODUCT CERTIFICATION MARK.. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. Member of the SGS Group (Société Générale de Surveillance) SGS-CSTC Standards Technical Services Ltd. 1/F., Building No. 1 Building, Agriculture Machinery Materials Co. Wushan Road, Shipai, Tianhe District,Guangzhou, China Telephone: +86 (0) 20 3848 1001 Fax: +86 (0) 20 3848 1006 [email protected] FEDERAL COMMUNICATIONS COMMISSION Registration number: 282399 FCC TEST REPORT Application No. : 03.03.0241E Applicant : Echo Toys Ltd FCC ID : HAP91252T49 Fundamental Frequency : 49.860MHz Equipment under Test (EUT): Name : Sliver Echo Model : 91252 Standards : FCC PART 15, SUBPART C : 2002 Date of Receipt : 13 March 2003 Date of Test : 14 March 2003 Date of Issue : 17 March 2003 Test Result : PASS * * In the configuration tested, the EUT complied with the standards specified above. FCC ID No.: HAP91252T49 Report No.: 03.03.0241E-1 Page: 2 of 10 SGS-CSTC Standards Technical Services Ltd. 2 Contents Page 1 COVER PAGE.........................................................................................................................................................1 2 CONTENTS .............................................................................................................................................................. 2 3 GENERAL INFORMATION.................................................................................................................................. 3 3.1 C LIENT INFORMATION............................................................................................................................................ 3 3.2 D ETAILS OF E.U.T. ................................................................................................................................................. 3 3.3 D ESCRIPTION OF SUPPORT UNITS........................................................................................................................... 3 3.4 T EST LOCATION...................................................................................................................................................... 3 3.5 O THER INFORMATION REQUESTED BY THE CUSTOMER.......................................................................................... 3 3.6 T EST FACILITY........................................................................................................................................................ 4 4 TEST RESULTS....................................................................................................................................................... 5 4.1 T EST INSTRUMENTS................................................................................................................................................ 5 4.2 E.U.T. OPERATION................................................................................................................................................. 5 4.3 T EST PROCEDURE & MEASUREMENT DATA........................................................................................................... 5 4.3.1 Radiated Emissions ...................................................................................................................................... 5 4.3.2 Occupied Bandwidth .................................................................................................................................... 7 4.3.3 Photographs - Radiated Emission Test Setup in Chamber .......................................................................... 8 5 PHOTOGRAPHS - EUT CONSTRUCTIONAL DETAILS ...........................................................................9-10 FCC ID No.: HAP91252T49 Report No.: 03.03.0241E-1 Page: 3 of 10 SGS-CSTC Standards Technical Services Ltd. 3 General Information 3.1 Client Information Applicant: Echo Toys Ltd Address of Applicant: Room 1108, Peninsula Centre 67 Mody Road, Tism Sha Tusi East,Kowloon, Hong Kong. 3.2 Details of E.U.T. Product Name: Sliver Echo (Transmitter Part) Model: 91252 Power Supply: 9V DC (1 x ‘6F22’ Battery) Power Cord: N/A- 3.3 Description of Support Units The EUT was tested as an independent unit: a radio transmitter. 3.4 Test Location All tests were performed at:- SGS-CSTC Standards Technical Services Ltd., Guangzhou Safety & EMC Laboratory, 1/F, Building No. 1, Agriculture Machinery Materials Company Warehouse Ltd., Wushan Road Shipai, Tianhe District, Guangzhou, China. P.C. 510630. Tel: +86 20 3848 1001 Fax: +86 20 3848 1006 3.5 Other Information Requested by the Customer None. FCC ID No.: HAP91252T49 Report No.: 03.03.0241E-1 Page: 4 of 10 SGS-CSTC Standards Technical Services Ltd. 3.6 Test Facility The test facility is recognized, certified, or accredited by the following organizations: 1. NVLAP – Lab Code: 200611-0 SGS-CSTC Standards Technical Services Co., Ltd., Guangzhou EMC Laboratory is recognized under the National Voluntary Laboratory Accreditation Program …

Text truncated - open the document above for the full version.