HAP91276T49Remote Control Toy Transmitter

Model No: 91276-49.860MHz CIRCUIT DESCRIPTION In transmitter, press the Forward, Backward, Left or Right, Turbo, Spin out, output IC1 pin 10 supply encoding signal. Q2 & X1 is a crystal oscillator of 49.860MHz frequency. Q1 is a modulator. Output of Q1 drives the transformer L1. The antenna is coupled to the modulator by the transformer. In receiver L1 is tuning 49.860MHz frequency. And Q3 is a RF amplifier and detector stage. IC1 is a signal amplifier and decoder, it controls the output of IC1 pin12, 13 and pin7, 9 and pin6, 14. Q7, Q13, Q8 andQ14 are regulator. Q1, Q9, Q2, Q11 are Forward And Backward motor driver, and Q10, Q19, Q12, Q21 are Left And Right motor driver. The IC1 pin 6, 14 output an encoding signal to IC2 pin5, 6. IC2 is a MCU, it controls the output of IC2 pin10, 11. Q18 andQ23 are regulator. Q20, Q25, Q22, Q26 are Spin out motor driver. ANTENNA AND GROUND CIRCUITRY This unit makes use of an external flexible 31 centimeters long antenna. The antenna is inductively coupled. The unit relies on the ground tract of the printed circuit board. No external ground is provided. Energy is supplied a 9-volt battery.

Report No.: 03.09.1707EF-1 Page: 1 of 10 FCC ID: HAP91276T49 Authorized Signature: Kent Hsu Laboratory Manager SGS-CSTC Co.,Ltd. This report refers to the General Conditions for Inspection and Testing Services, printed overleaf This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the SGS PRODUCT CERTIFICATION MARK.. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. Member of the SGS Group (Société Générale de Surveillance) SGS-CSTC Standards Technical Services Ltd. 1/F., Building No. 1 Building, Agriculture Machinery Materials Co. Wushan Road, Shipai, Tianhe District,Guangzhou, China Telephone: +86 (0) 20 3848 1001Fax: +86 (0) 20 3848 1006 [email protected] FEDERAL COMMUNICATIONS COMMISSION Registration number: 282399 FCC TEST REPORT Application No.: 03.09.1707E Applicant: Echo Toys Ltd FCC ID: HAP91276T49 Fundamental Frequency : 49.860MHz Equipment under Test (EUT): Name: Mitsubishi-Eclipse Spyder Model: 91276 Standards: FCC PART 15, SUBPART C : 2002 Date of Receipt: 19 September 2003 Date of Test: 21 to 22 September 2003 Date of Issue: 30 September 2003 Test Result :PASS * *In the configuration tested, the EUT complied with the standards specified above. FCC ID No.: HAP91276T49 Report No.:03.09.1707EF-1 Page:2 of 10 SGS-CSTC Standards Technical Services Ltd. 2 Contents Page 1COVER PAGE..............................................................................................................................................................................1 2CONTENTS...................................................................................................................................................................................2 3GENERAL INFORMATION.......................................................................................................................................................3 3.1CLIENT INFORMATION............................................................................................................................................................3 3.2DETAILS OF E.U.T.....................................................................................................................................................................3 3.3DESCRIPTION OF SUPPORT UNITS........................................................................................................................................3 3.4TEST LOCATION........................................................................................................................................................................3 3.5OTHER INFORMATION REQUESTED BY THE CUSTOMER..................................................................................................3 3.6TEST FACILITY.........................................................................................................................................................................4 4TEST RESULTS............................................................................................................................................................................5 4.1TEST INSTRUMENTS.................................................................................................................................................................5 4.2E.U.T. OPERATION...................................................................................................................................................................5 4.3TEST PROCEDURE & MEASUREMENT DATA.......................................................................................................................5 4.3.1Radiated Emissions......................................................................................................................................................5 4.3.2Occupied Bandwidth...................................................................................................................................................7 4.3.3Photographs - Radiated Emission Test Setup in Chamber...................................................................................8 5PHOTOGRAPHS - EUT CONSTRUCTIONAL DETAILS.............................................................................................9-10 FCC ID No.: HAP91276T49 Report No.:03.09.1707EF-1 Page:3 of 10 SGS-CSTC Standards Technical Services Ltd. 3 General Information 3.1 Client Information Applicant:Echo Toys Ltd Address of Applicant:Room 1108, Peninsula Centre 67 Mody Road, Tsim Sha Tsui East,Kowloon, Hong Kong. 3.2 Details of E.U.T. Product Name:Mitsubishi-Eclipse Spyder (Transmitter Part) Model: 91276 Power Supply:9V DC (1 x ‘6F22’ Battery) Power Cord:N/A- 3.3 Description of Support Units The EUT was tested as an independent unit: a 49MHz radio transmitter. 3.4 Test Location All tests were performed at:- SGS-CSTC Standards Technical Services Ltd., Guangzhou Safety & EMC Laboratory, 1/F, Building No. 1, Agriculture Machinery Materials Company Warehouse Ltd., Wushan Road Shipai, Tianhe District, Guangzhou, China. P.C. 510630. Tel: +86 20 3848 1001 Fax: +86 20 3848 1006 3.5 Other Information Requested by the Customer None. FCC ID No.: HAP91276T49 Report No.:03.09.1707EF-1 Page:4 of 10 SGS-CSTC Standards Technical Services Ltd. 3.6 Test Facility The…

Text truncated - open the document above for the full version.