HD5-1800ABarcode Scanner

HH1800 Area-Imaging Scanner User Guide Disclaimer Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made. The information in this publication does not represent a commitment on the part of HII. HII shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from the furnishing, performance, or use of this material. HII disclaims all responsibility for the selection and use of software and/or hardware to achieve intended results. This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced, or translated into another language without the prior written consent of HII. Copyright © 2018-2020 Honeywell International Inc. All rights reserved. Web Address: www.honeywellaidc.com Trademarks Microsoft® Windows® and the Windows logo are trademarks or registered trademarks of Microsoft Corporation. The Bluetooth® word mark and logos are owned by Bluetooth SIG, Inc. Apple is a trademark of Apple Inc., registered in the U.S. and other countries. Other product names or marks mentioned in this document may be trademarks or registered trademarks of other companies and are the property of their respective owners. Patents For patent information, refer to www.hsmpats.com. HH1800 User Guide iii TABLE OF CONTENTS Customer Support ................................................................................................................................ xiii Technical Assistance ..................................................................................................................... xiii Product Service and Repair ........................................................................................................... xiii Limited Warranty .......................................................................................................................... xiii CHAPTER 1 - GET STARTED .............................................................. 1 About This Manual ................................................................................................................................. 1 Unpack Your Device ................................................................................................................................ 1 Connect the Device ................................................................................................................................ 1 Connect with USB ............................................................................................................................ 1 Connect with RS232 Serial Port ...................................................................................................... 2 Reading Techniques................................................................................................................................ 3 Menu Barcode Security Settings ............................................................................................................ 3 Set Custom Defaults ............................................................................................................................... 3 Reset the Custom Defaults ..................................................................................................................... 3 CHAPTER 2 - PROGRAM THE INTERFACE......................................... 5 Introduction ............................................................................................................................................ 5 Program the Interface - Plug and Play.................................................................................................... 5 RS232 Serial Port .................................................................................................................................... 5 USB IBM SurePos .................................................................................................................................... 6 USB PC or Macintosh Keyboard ............................................................................................................. 6 USB HID ................................................................................................................................................... 7 USB Serial................................................................................................................................................ 7 CTS/RTS Emulation .......................................................................................................................... 7 ACK/NAK Mode ............................................................................................................................... 8 Remote MasterMind™ for USB .............................................................................................................. 8 Keyboard Country Layout ....................................................................................................................... 8 Keyboard Wedge Modifiers.................................................................................................................. 15 ALT Mode.............................................................................................................................................. 15 iv HH1800 User Guide Keyboard Style ...................................................................................................................................... 16 Keyboard Conversion ............................................................................................................................ 16 Control Character Output .......................................................................…

Text truncated - open the document above for the full version.

RF_160, Issue 04 HONEYWELL INTERNATIONAL INC Declaration of Authorization We Name: < HONEYWELL INTERNATIONAL INC > Address: 9680 Old Bailes Rd, Fort Mill, SC 29707-7539, USA . City:  Fort Mill . Country:  USA . Declare that: Name Representative of agent: ...Lisa Jing........... (1) Agent Company name:  DEKRA Testing and Certification (Suzhou) Co., Ltd.. Address:  No.99 Hongye RD.Suzhou Industrial Park, Suzhou China .. City:  Suzhou .. Country  China . is authorized to apply for Certification of the following product(s): Product description: Barcode Scanner . Type designation:  HH1800. Trademark:  Honeywell . Validity/ expiry date on our behalf. Date: 2022/11/09.. City:  Fort Mill .. Name:  Mandana Salahshour .. (2) Function: ......Global Regulatory Compliance Manager......................... Signature: . Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

FCC, Request for non-disclosure Date: 21-Nov-2018 RF_501, Issue 8 Page 1 of 1 Company Name: HONEYWELL INTERNATIONAL INC Address: 9680 Old Bailes Rd, Fort Mill, SC 29707-7539, USA City: Fort Mill Country: USA To: Telefication B.V., Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Request for confidentiality FCC ID: HD5-1800A Reference number: ###### Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (See notes below): Internal Photos User’s Manual Test Set-up Photos External Photos Justification: Date: 2022/11/09 Name and signature of applicant: Mandana Salahshour Notes: 1) A document or type of document can only have ONE type of confidentiality! 2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)! The planned date should stated in the RF731 application form. 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this! 5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period FCC, Request for non-disclosure Date: 21-Nov-2018 RF_501, Issue 8 Page 1 of 1

DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 22A0289R-RF-External Photo Page 1 / 3 External Photographs (1) EUT Photo (2) EUT Photo DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 22A0289R-RF-External Photo Page 2 / 3 (3) EUT Photo (4) EUT Photo DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 22A0289R-RF-External Photo Page 3 / 3 (5) EUT Photo (6) EUT Photo

DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 22A0289R-RF-Internal Photo Page 1 / 3 Internal Photographs (1) EUT Photo (2) EUT Photo DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 22A0289R-RF-Internal Photo Page 2 / 3 (3) EUT Photo (4) EUT Photo DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 22A0289R-RF-Internal Photo Page 3 / 3 (5) EUT Photo

DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 FCC Designation Number: CN1199 Test report No: 22A0289R-RF-US-P20V01 TEST REPORT Rules&Requlations FCC Exposure Evaluation Declaration Product Name Barcode scanner Trademark Honeywell Model and /or type reference HH1800 FCC ID HD5-1800A Applicant ́s name / address HONEYWELL INTERNATIONAL INC Honeywell Safety and Productivity Solutions 9680 OLD BAILES RD FORT MILL SC 29707-7539,USA Test method requested, standard KDB 447498D01V06 FCC Part1.1310 Verdict Summary IN COMPLIANCE Documented by (name / position & signature) Tim Cao/Project Engineer Approved by (name / position & signature) Jack Zhang/ Supervisor Date of issue 2022-11-09 Report Version V1.0 Report template No Template_FCC 1.1310-RF-V1.0 DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 22A0289R-RF-US-P20V01 Page 2 / 14 INDEX page Competences and Guarantees ............................................................................................................................. 3 General conditions ............................................................................................................................................... 3 Environmental conditions ..................................................................................................................................... 3 Possible test case verdicts ................................................................................................................................... 4 Abbreviations ....................................................................................................................................................... 4 Document History ................................................................................................................................................ 5 Remarks and Comments ..................................................................................................................................... 5 1. General Information .................................................................................................................................... 6 1.1. EUT Description .......................................................................................................................................... 6 1.2. Antenna information .................................................................................................................................... 6 1.3. Mode of Operation ...................................................................................................................................... 7 1.4. Configuration of Tested System .................................................................................................................. 8 1.5. EUT Exercise Software ............................................................................................................................... 9 2. Test Environment ...................................................................................................................................... 10 3. Electric Field Strength ............................................................................................................................... 11 3.1 Test Equipment ......................................................................................................................................... 11 3.2 Test Setup ................................................................................................................................................ 11 3.3 Limit .......................................................................................................................................................... 12 3.4 Test Procedure ......................................................................................................................................... 13 3.5 Uncertainty ............................................................................................................................................... 13 3.6 Test Result ............................................................................................................................................... 14 DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 22A0289R-RF-US-P20V01 Page 3 / 14 COMPETENCES AND GUARANTEES DEKRA is a testing laboratory competent to carry out the tests described in this report. In order to assure the traceability to other national and international laboratories, DEKRA has a calibration and maintenance program for its measurement equipment. DEKRA guarantees the reliability of the data presented in this report, which is the result of the measurements and the tests performed to the item under test on the date and under the conditions stated in the report and it is based on the knowledge and technical facilities available at DEKRA at the time of performance of the test. DEKRA is liable to the client for the maintenance of the confidentiality of all information related to the item under test and the results of the test. The results presented in this Test Report apply only to the particular item under test established in this document. IMPORTANT: No parts of this report may be reproduced or quoted out of context, in any form or by any means, except in full, without the previous written permission of DEKRA. GENERAL CONDITIONS Test Location No. 99, Hongye Road, Suzhou Industrial Park Suzhou, 215006, P.R. China Date(receive sample) Oct. 14, 2022 Date (start test) Oct. 15, 2022 Date (finish test) Nov. 01, 2022 1. This report is only referred to the it…

Text truncated - open the document above for the full version.

DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Test report No: 22A0289R-RF-US-P06V01 TEST REPORT FCC Rules&Requlations 47 CFR Chapter I - Part 15C & RSS-210 Issue 10 Product Name Barcode scanner Trademark Honeywell Model and /or type reference HH1800 FCC ID HD5-1800A IC 1693B-1800A Applicant’s name / address HONEYWELL INTERNATIONAL INC Honeywell Safety and Productivity Solutions 9680 OLD BAILES RD FORT MILL SC 29707-7539,USA Test method requested, standard FCC CFR Title 47 Part 15 Subpart C Section 15.225 RSS-210 Issue 10 (2019-12) Verdict Summary IN COMPLIANCE Documented by (name / position & signature) Tim Cao/Project Engineer Approved by (name / position & signature) Jack Zhang/ Supervisor Date of issue 2022-11-09 Report Version V1.0 Report template No Template_FCC 15.225-RF-V1.0 DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 22A0289R-RF-US-P06V01 Page 2 / 36 INDEX page Competences and Guarantees ............................................................................................................................. 4 General conditions ............................................................................................................................................... 4 Environmental conditions ..................................................................................................................................... 4 Possible test case verdicts ................................................................................................................................... 5 Abbreviations ....................................................................................................................................................... 5 Document History ................................................................................................................................................ 6 Remarks and Comments ..................................................................................................................................... 6 Used Equipment .................................................................................................................................................. 7 Uncertainty .......................................................................................................................................................... 8 1 General Information .................................................................................................................................... 9 1.1 General Description of the Item(s) ..................................................................................................... 9 1.2. Antenna information .................................................................................................................................. 10 2 Description of Test Setup .......................................................................................................................... 11 2.1 Operating mode(s) used for tests .................................................................................................... 11 2.2 Support / Auxiliary equipment / unit / Test software for the EUT ....................................................... 11 2.3 Test Configuration / Block diagram used for tests ............................................................................ 12 2.4 Testing process ............................................................................................................................... 13 3 Verdict summary section ........................................................................................................................... 14 3.1 Standards ....................................................................................................................................... 14 3.2 Overview of results .......................................................................................................................... 14 3.3 Test Facility ..................................................................................................................................... 15 4 Test Results .............................................................................................................................................. 16 4.1 AC Power Line Conducted Emission ............................................................................................... 16 4.1.1 Limit ...................................................................................................................................... 16 4.1.2 Test Setup ............................................................................................................................. 16 4.1.3 Test Procedure ...................................................................................................................... 16 4.1.4 Test Data .............................................................................................................................. 17 4.2 E-field Emission .............................................................................................................................. 19 4.2.1 Limit ...................................................................................................................................... 19 4.2.2 Test Setup ............................................................................................................................. 19 4.2.3 Test Procedure ...................................................................................................................... 19 4.2.4 Test Data .........................................................................................................................…

Text truncated - open the document above for the full version.

DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 22A0289R-RF-US-Test Photo Page 1 / 2 FCC Test Photographs Description: Radiated emission(Below 30MHz) Description: Radiated emission(Above 30MHz) DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 22A0289R-RF-US-Test Photo Page 2 / 2 Description: AC Power Line Conducted Emission Description: AC Power Line Conducted Emission