HD5-1962CCBHCharge Base

User Guide Xenon Ultra 196X Series Accessories Prelim Draft, not for release Disclaimer Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made. HII makes no representation or warranties regarding the information provided in this publication. HII shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from the furnishing, performance, or use of this material. HII disclaims all responsibility for the selection and use of software and/or hardware to achieve intended results. This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced, or translated into another language without the prior written consent of HII. Copyright 2023 Honeywell Group of Companies. All rights reserved. Web Address: sps.honeywell.com Trademarks Other product names or marks mentioned in this document may be trademarks or registered trademarks of other companies and are the property of their respective owners. Patents For patent information, refer to www.hsmpats.com. Prelim Draft, not for release Xenon Ultra 196x Series Accessories User Guideiii TABLE OF CONTENTS Customer Support ..........................................................................................................................v Technical Assistance...............................................................................................................v Product Service and Repair..................................................................................................v Limited Warranty......................................................................................................................v Chapter 1 - Introduction..................................................................................1 List of Accessories.........................................................................................................................2 Agency Models................................................................................................................................2 Chapter 2 - Universal CCB...............................................................................3 Out of the Box..................................................................................................................................3 Features.............................................................................................................................................4 Front..............................................................................................................................................4 Back...............................................................................................................................................4 Connect Power ................................................................................................................................4 Charge the Scanner.......................................................................................................................6 Mount a Universal CCB................................................................................................................7 Status LED........................................................................................................................................7 Product Specifications.................................................................................................................7 Required Safety Labels................................................................................................................8 Chapter 3 - Replacement Cups.......................................................................9 Out of the Box..................................................................................................................................9 Features.......................................................................................................................................... 10 Prelim Draft, not for release ivXenon Ultra 196x Series Accessories User Guide Front...........................................................................................................................................10 Back............................................................................................................................................10 Replace the Cup...........................................................................................................................10 Required Safety Labels .............................................................................................................12 Chapter 4 - Replacement Magnet............................................................... 13 Out of the Box................................................................................................................................13 Install the Magnet.......................................................................................................................14 Remove the Magnet....................................................................................................................14 Chapter 5 - Contact End Cap........................................................................ 15 Out of the Box................................................................................................................................15 Replace End Cap..........................................................................................................................15 Chapter 6 - Horizontal CCB.......................................................................... 17 Out of the Box.........................…

Text truncated - open the document above for the full version.

Agent letter FCC attestation statement Kiwa Page 1 of 2 RF_753, Issue 2 15-02-2023 [PLACE ON APPLICANT/COMPANY LETTERHEAD] U.S. Agent Designation for Service of Process (Applicant and U.S. Agent are Separate Parties) TO: Kiwa Nederland B.V. Wilmersdorf 50 7327 AC Apeldoorn Postbus 137 7300 AC Apeldoorn Netherlands ATTENTION: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company name: HONEYWELL INTERNATIONAL INC FRN: 0022970339 Contact person name: Cindy Jiang Street address: 9680 OLD BAILES RD FORT MILL SC 29707- 7539,US A ZIP/City/State 29707 Telephone number: +86(512)82258162 Email address: CindyJiangohoneywell.com Signature: Date: This letter is to confirm that we (“the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission- related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: HONEYWELL INTERNATIONAL INC Grantee Code: HD5 Contact person name: Cindy Jiang Street address: 9680 OLD BAILES RD FORT MILL SC 29707- 7539,US A ZIP/City/State/Country 29707 Telephone number: +86(512)82258162 Email address: [email protected] Agent letter FCC attestation statement Kiwa Page 2 of 2 RF_753, Issue 2 15-02-2023 [PLACE ON APPLICANT/COMPANY LETTERHEAD] Signature: Date: Revision Record Sheet: Revision Section number Page number Date Remark(s) issued by 01 07-02-2023 1 st version RvdM 02 1 15-05-2023 Added FRN to Agent details RvdM Issued/modified by : Richard van der Meer Function : Certification assessor Revision : 02 Date : 15-02-2023 Verified by : Willem Jan Jong Function : Team Lead Date : 16-02-2023 Released by : Axel Gase Function : Manager Quality Assurance Date of release: : 19-02-2023

Covered list attestation FCC application letter Kiwa Page 1 of 2 RF_755_02 15-02-2023 [PLACE COMPANY LOGO HERE OR PUT ON COMPANY LETTERHEAD] Certification Application Attestation Statements <Honeywell International Inc. > <9680 Old Bailes Rd Fort Mill SC 29707 United States of America > <29707> < Fort Mill > < USA > Subject: FCC ID: < HD5-1962CCBH > To Whom It May Concern: Statement for 47 CFR section 2.911(d)(5)(i) Honeywell International Inc. certifies that as of the date of the application the equipment for which authorization is sought is not “covered” equipment 1 prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, including affiliates or subsidiaries of the named companies, the applicant must include an explanation on why the equipment is not “covered” equipment. Additional Explanation: <N/A> Statement for 47 CFR section 2.911(d)(5)(ii) Honeywell International Inc. (“the applicant”) certifies that, as of the date of the filing of this application, the applicant - is / - is not (3) identified on the Covered List as an entity producing “covered” equipment. Date: 2023-6-18 City: Fort Mill Name (2) : Cindy Jiang Function: Global Regulatory Compliance Manager Telephone number: +86(512)82258162 Email address: [email protected] Signature: 1 ‐ The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist . (2): For FCC it must be the Grantee Code “owner” or the authorized agent. (3): double click on the appropriate box and select ‘’checked” then “OK” Covered list attestation FCC application letter Kiwa Page 2 of 2 RF_755_02 15-02-2023 [PLACE COMPANY LOGO HERE OR PUT ON COMPANY LETTERHEAD] Revision Record Sheet: Revision Section number Page number Date Remark(s) issued by 01 07-02-2023 1 st version RvM 02 1 15-02-2023 Changed Applicant to Company and added “Subject: FCC ID: “ RvdM Issued/modified by : Richard van de Meer Function : Certification assessor Revision : 02 Date : 15-02-2023 Verified by : Willem Jan Jong Function : Team Lead Date : 16-02-2023 Released by : Axel Gase Function : Manager Quality Assurance Date of release: : 19-02-2023

RF_160_05 Declaration of Authorisation Date of issue 02-01-2023 HONEYWELL INTERNATIONAL INC Declaration of Authorization We Name: HONEYWELL INTERNATIONAL INC Address:  9680 Old Bailes Rd, Fort Mill, SC 29707-7539, USA City:  Fort Mill . Country:  USA . Declare that: Name Representative of agent: ... Yingfei Wang.......... (1) Agent Company name:  DEKRA Testing and Certification (Suzhou) Co., Ltd.. Address:  No.99 Hongye Rd., Suzhou Industrial Park ,.. City:  Suzhou.. Country  China. is authorized to apply for Certification of the following product(s): Product description:  Charge Base . Type designation:  1962 Horizontal . Trademark:  Honeywell . Validity/ expiry date on our behalf. Date: 2023.6.18... Name:  Cindy Jiang .. (2) Function: ...Global Regulatory Compliance Manager...................... Signature:  . Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent. Revision Record Sheet: Revision Section number Page number Date Remark(s) issued by 02 1 02-01-2023 History sheet added AG Issued/modified by : Axel Gase Function : Quality Manager Revision : 02 Date : 02-01-2023 Verified by : Willem Jan Jong Function : Team Lead Date : 02-01-2023 Released by : Axel Gase Function : Manager Quality Assurance Date of release: : 02-01-2023

FCC, Request for non-disclosure Date: 02-01-2022 RF_501, Issue 10 Company Name: HONEYWELL INTERNATIONAL INC Address : 9680 Old Bailes Rd, Fort Mill, SC 29707-7539, USA City: Fort Mill Country: USA To: Kiwa Netherlands B.V., Dept. FCC TCB Wilmersdorf 50 7327 AC Apeldoorn The Netherlands Subject: Request for confidentiality FCC ID: HD5-1962CCBH Reference number: ###### Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, a pplicant hereby requests Short-Term Confidential treatment of the following materials (See notes below): Internal Photos User’s Manual Test Set-up Photos External Photos Justification: Date: 2023-6-18 Name and signature of applicant: Cindy Jiang Notes: 1) A document or type of document can only have ONE type of confidentiality! 2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)! The planned date should state in the RF731 application form. 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this! 5) Request for extension or for release must be received by Kiwa NL B.V. at least 7 days before date of actual marketing or before expiration of the STC period FCC, Request for non-disclosure Date: 02-01-2023 RF_501, Issue 10 Page 1 of 1 Revision Record Sheet: Revision Section number Page number Date Remark(s) issued by 10 1 02-01-2023 History sheet added AG Issued/modified by : Axel Gase Function : Quality Manager Revision : 10 Date : 02-01-2023 Verified by : Willem Jan Jong Function : Team Lead Date : 02-01-2023 Released by : Axel Gase Function : Manager Quality Assurance Date of release: : 02-01-2023

DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2350171R-RF-External Photo Page 1 / 4 External Photographs (1) EUT Photo (2) EUT Photo DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2350171R-RF-External Photo Page 2 / 4 (3) EUT Photo (4) EUT Photo DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2350171R-RF-External Photo Page 3 / 4 (5) EUT Photo (6) EUT Photo DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2350171R-RF-External Photo Page 4 / 4 (7) EUT Photo (8) EUT Photo

DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2350171R-RF-Internal Photo Page 1 / 4 Internal Photographs (1) EUT Photo (2) EUT Photo DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2350171R-RF-Internal Photo Page 2 / 4 (3) EUT Photo (4) EUT Photo DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2350171R-RF-Internal Photo Page 3 / 4 (5) EUT Photo (6) EUT Photo DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2350171R-RF-Internal Photo Page 4 / 4 (7) EUT Photo

DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Test report No: 2350171R-RF-US-P20V01 FCC Exposure TEST REPORT Product Name Charge Base Trademark Honeywell Model and /or type reference 1962 Horizontal FCC ID HD5-1962CCBH Applicant ́s name / address HONEYWELL INTERNATIONAL INC Honeywell Safety and Productivity Solutions 9680 OLD BAILES RD FORT MILL SC 29707-7539,USA Test method requested, standard FCC 47CFR §2.1093 Verdict Summary IN COMPLIANCE Documented By (name / position & signature) Jun Xu/ Project Engineer Approved by (name / position & signature) Jack Zhang/ Manager Date of issue 2023-06-16 Report template No Template_FCC-MPE-RF-V1.0 DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2350171R-RF-US-P20V01 Page 2 / 11 INDEX page Competences and Guarantees ................................................................................................................................... 3 General conditions ...................................................................................................................................................... 3 Environmental conditions............................................................................................................................................ 3 Possible test case verdicts ......................................................................................................................................... 4 Abbreviations .............................................................................................................................................................. 4 Document History ....................................................................................................................................................... 5 Remarks and Comments ............................................................................................................................................ 5 1 General Information ........................................................................................................................................... 6 1.1 General Description of the Item(s) .......................................................................................................... 6 1.2 Antenna Informaion ................................................................................................................................. 7 2. RF Exposure Evaluation .................................................................................................................................... 8 2.1. Limits ................................................................................................................................................................. 8 2.2. Test Procedure ................................................................................................................................................ 11 2.3. Test Result of RF Exposure Evaluation .......................................................................................................... 11 DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2350171R-RF-US-P20V01 Page 3 / 11 COMPETENCES AND GUARANTEES DEKRA is a testing laboratory competent to carry out the tests described in this report. In order to assure the traceability to other national and international laboratories, DEKRA has a calibration and maintenance program for its measurement equipment. DEKRA guarantees the reliability of the data presented in this report, which is the result of the measurements and the tests performed to the item under test on the date and under the conditions stated in the report and it is based on the knowledge and technical facilities available at DEKRA at the time of performance of the test. DEKRA is liable to the client for the maintenance of the confidentiality of all information related to the item under test and the results of the test. The results presented in this Test Report apply only to the particular item under test established in this document. IMPORTANT: No parts of this report may be reproduced or quoted out of context, in any form or by any means, except in full, without the previous written permission of DEKRA. GENERAL CONDITIONS Test Location No. 99, Hongye Road, Suzhou Industrial Park Suzhou, 215006, P.R. China Date(receive sample) May. 08, 2023 Date (start test) May. 09, 2023 Date (finish test) Jun. 14, 2023 1. This report is only referred to the item that has undergone the test. 2. This report does not constitute or imply on its own an approval of the product by the Certification Bodies or Competent Authorities. 3. This document is only valid if complete; no partial reproduction can be made without previous written permission of DEKRA. 4. This test report cannot be used partially or in full for publicity and/or promotional purposes without previous written permission of DEKRA. ENVIRONMENTAL CONDITIONS The climatic conditions during the tests are within the limits specified by the manufacturer for the operation of the EUT and the test equipment. The climatic conditions during the tests were within the following limits: Ambient temperature 15 °C – 35 °C Relative Humidity air 30% - 60% If explicitly required in the basic standard or applied product / product family standard the climatic values are recorded and documented separately in this test report. DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2350171R-RF-US-P20V01 Page 4 / 11 POSSIBLE TEST CASE VERDICTS Test case …

Text truncated - open the document above for the full version.

Application Bluetooth Zigbee WLAN (IEEE 802.11 b/g) ISM 2.4GHz Wireless Devices Features PIFA Structure Small Size (2.0*1.5*1.0mm 3 ) Easy Optimizing with external lumped matching components SMT Available under Pb-free Condition RoHSCompliant DATASHEET DocumentDatasheet TypeDielectric Chip Antenna Application2.4GHz Part No.AMAN201510ST01 Revision0 Notes The contents of this datasheet are subject to change without notice. Please confirm the specifications and delivery conditions when placing your order. AMOTECH AMOTECH Co., Ltd. Datasheet / Dielectric Chip Antenna / 2.4GHz AMAN201512ST01 2 Rev. NoDateTitleContentsPage 0’09.08.27New Published Table of Content Revision History 1.Specifications 3 1.1 Electrical Specifications 3 1.2 Mechanical Specifications 3 1.3 Appearance and Material 3 2. PCB Design for Test 4 2.1 Evaluation BoardDimension 4 2.2 PCB Design Guide 4 3. Measurement Result 5 3.1 Typical Measurement Result (VSWR/RL,Smithchart) 5 3.2 Typical Measurement Result(Gain, Radiation Pattern) 6 4. Reliability 7 5. Soldering Reflow Profile 7 6. Packaging 8 6.1 Carrier Tape Dimension 8 6.2 Packaging Label 8 Datasheet / Dielectric Chip Antenna / 2.4GHz AMAN201512ST01 3 NoItemSpec.Remark 1Frequency Range [GHz]2.4 ~2.485 2VSWRMax 3.0:1 3Peak Gain [dBi]typ. 2.9 4Total Avg. Gain [dBi]typ. -0.9 5Efficiency [%]typ. 82 6PolarizationLinear 7Impedance [Ω]Nominal 50 The results are measured on the 50x50mm 2 evaluation board(EVB). See Page 6. for more detail gain parameter NoItemSpec.Remark 1Dimensions (LxWxH)2.0x1.5x1.0 mm 3 2Unit Weighttyp. 11mg 3Operating Temperature-35 ~ +85 °C 1.1 Electrical Specifications 1.2 Mechanical Specifications 1.3 Appearance & Material 1. Specifications ② ① [unit : mm] NoItemFunctionMaterial ① Marking Feeding Index Ink ② Ceramic Body - Ceramic Datasheet / Dielectric Chip Antenna / 2.4GHz AMAN201512ST01 4 2.1 Evaluation Board Dimension 2.2 PCB Design Guide 2. PCB Design for Test ② ③ ① NoPin Assignment ① Feeding ②GND ③ GND Matching Component 50 Ohm Feeding Line [unit : mm] Evaluation board size ~ 50x50 Fill Cut Area (GND Clearance) ~ 7.5x3.8 [PCB Solder Land] Soldering pad Copper line Datasheet / Dielectric Chip Antenna / 2.4GHz AMAN201512ST01 5 3.1 Typical Measurement Result (VSWR/RL, Smithchart) 3. Measurement Result The results are measured on the 50x50mm 2 evaluation board(EVB). ② ③ ① NoMatching Value ①1.2nH ②3.3pF ③ 2.7nH Datasheet / Dielectric Chip Antenna / 2.4GHz AMAN201512ST01 6 [Azimuth plane @2.45GHz ] [Elevation1 plane @2.45GHz ] [Elevation2 plane @2.45GHz ] [3D Radiation Pattern] x y z -y Azimuth E1 E2 Peak Gain (dBi) Avg. Gain (dBi) Total Avg. Gain (dBi) Efficiency (%) Azimuth 1.63 -1.23 -0.8582 Elevation 1 2.32 -1.58 Elevation 2 1.36 -2.75 3.2 Typical Measurement Result (Gain, Radiation Pattern) Datasheet / Dielectric Chip Antenna / 2.4GHz AMAN201512ST01 7 NoItemTest ConditionTest Requirements 1 Adhesive Strength of Termination 1.Applied force on SMT chip till detached point from PCB. 1. No mechanical damage by applied force 2. Strength (F) > 1 kgf 2 Thermal Shock (Cycle) 1. Step 1 : -40 ±3°C, 30 min Step 2 : +125 ±3°C, 30 min 2. Number of cycle : 30 1. No visual damage 2. Within electric spec (VSWR) 3 High Temperature Resistance 1. Temperature : +125 ±5°C 2. Time : 1000 ±24 hrs 1. No visual damage 2. Within electric spec (VSWR) 4 Low Temperature Resistance 1. Temperature : -40 ±5°C 2. Time : 1000 ±24 hrs 1. No visual damage 2. Within electric spec (VSWR) 5Humidity 1. Humidity : 85 % RH Temperature : +85 ±3°C 2. Time : 1000 ±24 hrs 1. No visual damage 2. Within electric spec (VSWR) F SMD PAD PCB 4. Reliability 5. Soldering Reflow Profile [ Pb-free condition ] Datasheet / Dielectric Chip Antenna / 2.4GHz AMAN201512ST01 8 ItemSpec.ItemSpec.ItemSpec. A01.80 ±0.10P04.00 ±0.10E1.75 ±0.10 B02.30 ±0.10P14.00 ±0.10F5.50 ±0.10 K01.20 ±0.10P22.00 ±0.10W12.00 ±0.30 D01.55 ±0.05--t0.30 ±0.10 6.1 Carrier Tape Dimension 6.2 Packaging Label 6. Packaging AMOTECH Co., Ltd. 5BL-1Lot, 617, Namchon-Dong, Namdong-Gu, Incheon, Korea Dielectric Chip Antenna P/N : AMAN201510ST01 Lot No : Quantity : 2,500 pcs Date : 2009/08/27 ▲

DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Test report No: 2350171R-RF-US-P06V01 FCC & ISED TEST REPORT Product Name Charge Base Trademark Honeywell Model and /or type reference 1962 Horizontal FCC ID HD5-1962CCBH IC 1693B-1962CCBH Applicant ́s name / address HONEYWELL INTERNATIONAL INC Honeywell Safety and Productivity Solutions 9680 OLD BAILES RD FORT MILL SC 29707-7539,USA Test method requested, standard CFR 47, FCC Part 15 C ANSI C63.10: 2013 RSS-Gen / RSS-247 Verdict Summary IN COMPLIANCE Tested by (name / position & signature) Jun Xu/ Project Engineer Approved by (name / position & signature) Jack Zhang/ Manager Date of issue 2023-06-16 Report Version V1.0 Report template No Template_FCC 15.247-RF-V1.0 DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2350171R-RF-US-P06V01 Page 2 / 155 INDEX page General conditions ............................................................................................................................................................ 5 Environmental conditions .................................................................................................................................................. 5 Possible test case verdicts ................................................................................................................................................ 6 Abbreviations..................................................................................................................................................................... 6 Document History .............................................................................................................................................................. 7 Remarks and Comments .................................................................................................................................................. 7 Used Equipment ................................................................................................................................................................ 8 Uncertainty ...................................................................................................................................................................... 10 1 General Information ............................................................................................................................................... 11 1.1 General Description of the Item(s) ............................................................................................................... 11 1.2 Antenna Information .................................................................................................................................... 12 1.3 Channel List ................................................................................................................................................. 13 2 Description of Test Setup....................................................…

Text truncated - open the document above for the full version.