HD5-8690ABarcode Scanner

8690i Mini Wearable Mobile Computer Quick Start Guide 8690i-EN-QS Rev (a) 10/20
  1 Overview Note:The battery must be fully charged before the first use. An MB4-BAT-SCN07 or an MB4-SCN07 Charging Station must be purchased separately. 95% Battery Right  button Left  button Scanner User window Battery latch 2 Attach the Scanner to Your Hand 3 Pull the finger strap to secure it and tuck the excess strap length into the finger guide channel. 4 Right or Left Handed Operation To release the finger trigger, turn over the scanner. Slide the latch toward the user window to release the finger trigger. Turn the finger strap around and snap it into place to change the operation to the correct hand. 5 Power Up the Scanner Press the trigger to power up the scanner. The battery, WiFi, and Bluetooth status appear in the window. User Window The user window displays prompts for using the scanner in your environment. The buttons to the left and right of the window are used to scroll through the windows or to enter responses to screen prompts. •Press both the right and left buttons at the same time to view the WiFi, Bluetooth, and battery status. •Press and hold the left button for 6 seconds to restart the scanner. 95% 6 Wrist Position When Scanning How to Scan a Bar Code The 8690i scanner has a view finder that projects a bright aim- ing pattern. This aiming pattern should be centered over the bar code, but it can be positioned in any direction for a good read. Connect the Scanner via Bluetooth® Pair with a PC or Laptop Bluetooth Serial Port: Host Reconnect Mode The 8690i can pair with host Bluetooth devices such as personal computers, laptops, and tablets. In this mode, the host will  continually attempt to connect with the scanner. If the scanner and the host become disconnected, the host will manage the reconnection. ! Warning: Do not stare directly into the laser beam. 7 1.Scan the Host Reconnect Mode bar code, below. 2.Set your host device so it searches for other Bluetooth devices. (Refer to your host device’s User’s Guide for pairing instructions.) 3.Once your host device has located the scanner, select the 8690i scanner name from the list displayed. Note:Refer to the 8690i User’s Guide if your host device displays a PIN. The Bluetooth symbol appears in the scanner window when the scanner pairs with a host. Pair with a PC or Laptop Bluetooth Serial Port: Scanner Reconnect Mode In this mode, the scanner will continually attempt to connect with the host. If the scanner and the host become disconnected, the scanner will manage the reconnection. Host Reconnect Mode 8 1.Scan the Scanner Reconnect Mode bar code below. 2.Set your host device so it searches for other Bluetooth devices. (Refer to your host device’s User’s Guide for pairing instructions.) 3.Once your host device has located the scanner, select the 8690i scanner name from the list displayed. Note:Refer to the 8690i User’s Guide if your host device displays a PIN. The Bluetooth symbol appears in the scanner window when the scanner pairs with a host. Pair with a PC or Laptop Bluetooth: HID Keyboard Mode In this mode, the 8690i pairs with a Bluetooth device using a HID keyboard. Scanner Reconnect Mode 9 1.Scan the Bluetooth HID Keyboard Connect bar code below. 2.Set your host device so it searches for other Bluetooth devices. (Refer to your host device’s User’s Guide for pairing instructions.) 3.Once your host device has located the scanner, select the 8690i scanner name from the list displayed. Note:Refer to the 8690i User’s Guide if your host device displays a PIN. The Bluetooth symbol appears in the scanner window when the scanner pairs with a host. Disconnect from the Host Once your scanner has been connected to a host, you must dis- connect it in order to communicate with a different device. Scan the Bluetooth Disconnect bar code to unlink the scanner from the currently linked host. Bluetooth HID Keyboard Connect Bluetooth Disconnect 10 Pair with an Android™ Mobile Device Tap and Pair You can pair your Android™ phone with the 8690i by touching the devices together. 1.Make sure the NFC setting is On in your phone. 2.Touch the Android phone to the scanner. 3.The phone recognizes the scanner and prompts you to pair. 4.Verify the pairing of the 8690i in your phone’s Bluetooth settings. Pair with an Android, Apple™ or Windows® Mobile Device The 8690i can pair with Android, Apple, and Windows mobile devices, excluding Windows CE and Mobile. 1.Set your mobile device so it searches for other Bluetooth devices. (Refer to your mobile device’s User’s Guide for pair- ing instructions.) 2.Scan the Bluetooth HID Keyboard Connect bar code below. Bluetooth HID Keyboard Connect 11 3.On the mobile device, the 8690i scanner is shown as a keyboard. Click on it to pair. The Bluetooth symbol appears in the scanner window when the scanner pairs with a mobile device. Pair with a Honeywell Vehicle Mount Computer The 8690i can pair with Honeywell vehicle mount computers, such as the Thor VM1 or VM2, or with Tecton mobile computers. 1.Scan the Bluetooth HID Keyboard Disconnect bar code below. 2.Use the 8690i to scan the EZPairing bar code that is either supplied with the device, attached to the device, or displayed on the screen. The EZPairing bar code begins with {FNC3}LnkB, followed by 10 digits, like the sample below. The Bluetooth symbol appears in the user window when the 8690i pairs with a host. Bluetooth HID Keyboard Disconnect 12 Reset Custom Defaults If you want the custom default settings restored to your 8690i, scan the Activate Custom Defaults bar code below. This is the recommended default bar code for most users. It resets the 8690i to the custom default settings. If there are no custom defaults, it resets the 8690i to the factory default settings (Blue- tooth HID Keyboard Emulation). Any settings that have not been specified through the custom defaults are defaulted to the fac- tory default settings. Note:Scanning the Defaults bar code also…

Text truncated - open the document above for the full version.

HONEYWELL INTERNATIONAL INC Date：2020-11-06 Federal Communications Commission Authorization and Evaluation Division FCC ID: HD5-8690A Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: 1 Schematics 2 Block Diagram 3 Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Mandana Salahshour / [email protected] HONEYWELL INTERNATIONAL INC

Honeywell International Inc Honeywell Sensing & Productivity Solutions 9680 Old Bailes Road Fort Mill, SC 29707 USA Date: 2020 - 11 - 06 Non-SDR-Statement Federal Communications Commission Authorization and Evaluation Division ATTESTATION FCC ID: HD5- 8690A Product: Barcode Scanner Model: 8690i Regarding the SDR application guide (KDB442812 D01 SDR Apps Guide v02r03), our answer to the following five questions can be used for determining our device is not an SDR: 1. Can the RF parameters of the device be altered through software? Yes. 2. Can third parties not permitted by the Commission through specific filings modify, configure, or load different software, or make configuration settings to operate the device or host hardware radio frequency parameters (frequency range, modulation type, maximum output power or other radio parameters) in any other way than granted (or expected to be granted)? No. 3. Is the device capable of operating in any other in any other way than granted, or will be, granted? No. 5. Does the manufacturer elect SDR? No. Sincerely, Notes:Required for FCC & IC application Mandana Salahshour Global Regulatory Compliance Manager

DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2090075R-RF-External Photo Page 1 / 4 External Photographs EUT Photo(1) EUT Photo(2) DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2090075R-RF-External Photo Page 2 / 4 EUT Photo(3) EUT Photo(4) DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2090075R-RF-External Photo Page 3 / 4 EUT Photo(5) EUT Photo(6) DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2090075R-RF-External Photo Page 4 / 4 EUT Photo(7) EUT Photo(8)

DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2090075R-RF-Internal Photo Page 1 / 12 Internal Photographs EUT Photo(1) EUT Photo(2) DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2090075R-RF-Internal Photo Page 2 / 12 EUT Photo(3) EUT Photo(4) DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2090075R-RF-Internal Photo Page 3 / 12 EUT Photo(5) EUT Photo(6) DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2090075R-RF-Internal Photo Page 4 / 12 EUT Photo(7) EUT Photo(8) DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2090075R-RF-Internal Photo Page 5 / 12 EUT Photo(9) EUT Photo(10) DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2090075R-RF-Internal Photo Page 6 / 12 EUT Photo(11) EUT Photo(12) DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2090075R-RF-Internal Photo Page 7 / 12 EUT Photo(13) EUT Photo(14) DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2090075R-RF-Internal Photo Page 8 / 12 EUT Photo(15) EUT Photo(16) DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2090075R-RF-Internal Photo Page 9 / 12 EUT Photo(17) EUT Photo(18) DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2090075R-RF-Internal Photo Page 10 / 12 EUT Photo(19) EUT Photo(20) DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2090075R-RF-Internal Photo Page 11 / 12 EUT Photo(21) EUT Photo(22) DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2090075R-RF-Internal Photo Page 12 / 12 EUT Photo(23) EUT Photo(24)

DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Test report No: 2090075R-RF-US-P03V01 SAR TEST REPORT Product Name Barcode Scanner Trademark Honeywell Model and /or type reference 8690i FCC ID HD5-8690A IC 1693B-8690A FCC Designation Number CN1199 ISED CAB identifier CN0040 Applicant’s name / address HONEYWELL INTERNATIONAL INC Honeywell Safety and Productivity Solutions 9680 OLD BAILES RD FORT MILL SC 29707-7539,USA Test method requested, standard FCC KDB Publication 248227 D01v02r02 FCC KDB Publication 447498 D01v06 FCC KDB Publication 865664 D01v01r04 IEEE Std. 1528-2013 FCC 47CFR §2.1093 ANSI C95.1-2005 RSS 102: Issue 5 EN 62209-2: 2010 Test Result Max. SAR Measurement (10g) 2.4G Wifi: 0.477 W/kg 5G Wifi: 1.280 W/kg Bluetooth: 0.050 W/kg RFID: 0.095 W/kg 5G Wifi + RFID: 1.375 W/kg Verdict Summary IN COMPLIANCE Documented By (name / position & Kitty Li/Project Assistant DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2090075R-RF-US-P03V01 Page: 2 of 133 signature) Reviewed by (name / position & signature) Frank He/Technical Supervisor Approved by (name / position & signature) Jack Zhang/Supervisor Date of issue 2020-10-28 Report template No Template_FCC SAR-RF-V1.0 DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2090075R-RF-US-P03V01 Page: 3 of 133 INDEX Page COMPETENCES AND GUARANTEES ............................................................................................................ 5 GENERAL CONDITIONS.................................................................................................................................. 5 ENVIRONMENTAL CONDITIONS .................................................................................................................... 6 POSSIBLE TEST CASE VERDICTS ................................................................................................................ 6 DOCUMENT HISTORY ..................................................................................................................................... 7 REMARKS AND COMMENTS .......................................................................................................................... 7 1 GENERAL INFORMATION ...................................................................................................................... 8 1.1 General Description of the Item(s) ................................................................................................... 8 1.2 Antenna Information ........................................................................................................................ 11 1.3 Antenna Location ........................................................................................................................... 12 1.4 Channel List ................................................................................................................................... 13 2 SAR MEASUREMENT SYSTEM ........................................................................................................... 16 2.1 DASY5 System Description............................................................................................................ 16 2.1.1. Applications ................................................................................................................................ 17 2.1.2. Area Scans................................................................................................................................. 17 2.1.3. Zoom Scan (Cube Scan Averaging) .......................................................................................... 17 2.1.4. Uncertainty of Inter-/Extrapolation and Averaging ..................................................................... 18 2.2 DASY5 E-Field Probe ..................................................................................................................... 19 2.3 Boundary Detection Unit and Probe Mounting Device ................................................................... 20 2.4 DATA Acquisition Electronics (DAE) and Measurement Server ..................................................... 20 2.5 Robot .............................................................................................................................................. 21 2.6 Light Beam Unit .............................................................................................................................. 21 2.7 Device Holder ................................................................................................................................. 22 2.8 SAM Twin Phantom ........................................................................................................................ 22 3 TISSUE SIMULATING LIQUID .............................................................................................................. 23 3.1 The composition of the tissue simulating liquid .............................................................................. 23 3.2 Tissue Calibration Result ............................................................................................................... 24 3.3 Tissue Dielectric Parameters for Head and Body Phantoms ......................................................... 27 4 SAR MEASUREMENT PROCEDURE ................................................................................................... 28 4.1 SAR System Validation .................................................................................................................. 28 4.1.1. Validation Dipoles.........................................…

Text truncated - open the document above for the full version.

DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-509 Test report No: 2090075R-RF-US-P08V01 FCC DFS TEST REPORT & ISED DFS TEST REPORT Product Name Barcode Scanner Trademark Honeywell Model and /or type reference 8690i FCC ID HD5-8690A IC 1693B-8690A Applicant ́s name / address HONEYWELL INTERNATIONAL INC Honeywell Safety and Productivity Solutions 9680 OLD BAILES RD FORT MILL SC 29707-7539,USA Test method requested, standard RSS-Gen Issue 5; RSS-247 Issue 2; ANSI C63.10:2013; FCC CFR Title 47 Part 15 Subpart E FCC OET Order 16-24A1 (2016); KDB 905462 D02 v02 Verdict Summary IN COMPLIANCE Documented by (name / position & signature) Kitty Li/Project Assistant Tested by (name / position & signature) Frank He/ Technical Supervisor Approved by (name / position & signature) Jack Zhang/ Supervisor Date of issue 2020-10-13 Report template No Template_FCC Part15E-RF-V1.0 DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2090075R-RF-US-P08V01 Page 2 / 26 INDEX page General conditions ............................................................................................................................................................ 3 Environmental conditions .................................................................................................................................................. 3 Possible test case verdicts ................................................................................................................................................ 4 Abbreviations..................................................................................................................................................................... 4 Document History .............................................................................................................................................................. 5 Remarks and Comments .................................................................................................................................................. 5 Used Equipment ................................................................................................................................................................ 6 Uncertainty ........................................................................................................................................................................ 7 1 General Information ................................................................................................................................................. 8 1.1 General Description of the Item(s) ................................................................................................................. 8 1.2 Antenna Information ...................................................................................................................................... 9 1.3 Test Facility .................................................................................................................................................. 10 1.4 Standard Requirement ................................................................................................................................ 11 1.5 UNII Device Description .............................................................................................................................. 11 1.6 Test Setup ................................................................................................................................................... 12 1.7 Limits ........................................................................................................................................................... 13 1.8 Client Device requreiment ........................................................................................................................... 19 1.9 Radar Waveform Calibration ....................................................................................................................... 20 1.10 Radar Waveform Calibration Result ............................................................................................................ 21 2 Channel Move Time and Channel Closing Transmission Time ............................................................................. 25 2.1 Test Procedure ............................................................................................................................................ 25 2.2 Test Requirement ........................................................................................................................................ 25 2.3 Uncertainty ................................................................................................................................................... 25 2.4 Test Result of Channel Move Time and Channel Closing Transmission Time ........................................... 26 DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2090075R-RF-US-P08V01 Page 3 / 26 COMPETENCES AND GUARANTEES DEKRA is a testing laboratory competent to carry out the tests described in this report. In order to assure the traceability to other national and international laboratories, DEKRA has a calibration and maintenance program for its measurement equipment. DEKRA guarantees the reliability of the data presented in this report, which is the result of the measurements and the tests performed to the item under test on the date and under the conditions stated in the report and it is based on the knowledge and technical facilities available at DEKRA at the time of performance of the test. DEKRA is l…

Text truncated - open the document above for the full version.

DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Test report No: 2090075R-RF-US-P09V01 FCC&ISED TEST REPORT Product Name Barcode Scanner Trademark Honeywell Model and /or type reference 8690i FCC ID HD5-8690A IC 1693B-8690A Applicant ́s name / address HONEYWELL INTERNATIONAL INC Honeywell Safety and Productivity Solutions 9680 OLD BAILES RD FORT MILL SC 29707-7539,USA Test method requested, standard FCC CFR Title 47 Part 15 Subpart E Section 15.407 ANSI C63.10: 2013 KDB789033 D02v02r01 RSS-Gen Issue 5 / RSS-247 Issue 2 Verdict Summary IN COMPLIANCE Documented By (name / position & signature) Kitty Li/Project Assistant Reviewed by (name / position & signature) Frank He/ Technical Supervisor Approved by (name / position & signature) Jack Zhang/ Supervisor Date of issue 2020-10-13 Report template No Template_FCC 15.247-RF-V1.0 DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 Report no.: 2090075R-RF-US-P09V01 Page 2 / 270 INDEX page Competences and Guarantees ................................................................................................................................... 4 General conditions ...................................................................................................................................................... 4 Environmental conditions............................................................................................................................................ 4 Possible test case verdicts ......................................................................................................................................... 5 Abbreviations .............................................................................................................................................................. 5 Document History ....................................................................................................................................................... 6 Remarks and Comments ............................................................................................................................................ 6 Used Equipment ......................................................................................................................................................... 7 Uncertainty .................................................................................................................................................................. 9 1 General Information ......................................................................................................................................... 10 1.1 General Description of the Item(s) ........................................................................................................ 10 1.2 Antenna Information .............................................................................................................................. 11 1.3 Data Rate .............................................................................................................................................. 12 1.4 Channel List .......................................................................................................................................... 13 2 Description of Test Setup ................................................................................................................................ 14 2.1 Operating mode(s) used for tests.......................................................................................................... 14 2.2 Support / Auxiliary equipment / unit / Test software for the EUT .......................................................... 14 2.3 Test Configuration / Block diagram used for tests ................................................................................ 15 2.4 Testing process ..................................................................................................................................... 16 3 Verdict summary section ................................................................................................................................. 17 3.1 Standards .............................................................................................................................................. 17 3.2 Overview of results ................................................................................................................................ 17 3.3 Test Facility ........................................................................................................................................... 18 4 Test Results ..................................................................................................................................................... 19 4.1 AC Power Line Conducted Emission .................................................................................................... 19 4.1.1 Limit ............................................................................................................................................. 19 4.1.2 Test Setup ................................................................................................................................... 19 4.1.3 Test Procedure ........................................................................................................................... 19 4.1.4 Test Data..................................................................................................................................... 20 4.2 Emissions in restricted frequency bands .............................................................…

Text truncated - open the document above for the full version.